On 05/20/2011 04:56 PM, Antonio Olivares wrote:
Bernd,
On Fri, May 20, 2011 at 7:13 AM, Bernd Weber<weber.bernd@xxxxxxxx> wrote:
Hi Antonio,
thank you for the link. The slusb.ko is compiled now. But a "make
install" only installs the slamr.ko into the
/lib/modules/kernel/extra-directory. Even when I copy the module
manually, modprobe doesen't find the module:
modprobe slusb
Do you have any ideas?
run
>>>>>> of course with the modem connected and powered up, something
which might have been skipped while fighting with the software...
# depmod -a
or
$ sudo depmod -a
then
$ sudo modprobe slusb
or
# modprobe slusb
Regards,
Antonio
Regards
Bernd
Antonio Olivares schrieb:
Bernd,
Please check the following pages out:
http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883918.html
http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883985.html
http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg884183.html
Check them out and see if you can get it working on your system?
Regards,
Antonio
On Thu, May 19, 2011 at 3:51 PM, Bernd Weber<weber.bernd@xxxxxxxx> wrote:
Hi Antonio,
thanks a lot. This option carried me a step further - to the next error.
Please find enclosed the compilation and the error-log as well.
In the tar-ball enclosed are different patch-file. But there is no
documentation to what file or files these shold be applied and in which
cases.
Regards
Bernd
Antonio Olivares schrieb:
Bernd,
Try to use a special command make USB=1
$ sudo make USB=1
or
$ make USB=1
the slusb as well as the slamr driver will be compiled. Try that and
report back.
Regards,
Antonio
On Thu, May 19, 2011 at 10:22 AM, Bernd Weber<weber.bernd@xxxxxxxx> wrote:
Jacques,
I am using a 32-bits machine.
the URL:
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20110321.tar.gz
My steps:
tar xzvf slmodem-2.9.11-20110321.tar.gz
make
make install
And then I learned that slusb.ko wasn't compiled. I couldn't find the
reason. On some pages I got hints that there might be problems with
kernels later than 2.6.24.
May be I should have done further configuration efforts for slusb. But I
didn't find hints what I should do. So I have the choice to experiment a
few days or ask questions ;)
Greetings Bernd
Jacques Goldberg schrieb:
Bernd,
Please give us the URL of the file which compiled slamr and failed
slusb - I just would like to give it a try on my machine
(because I had the necessary hardware in my office, I happend to watch
Sacha, the author of the drivers, compiling and testing them , and I
am curious to see what fails and where)
Also, are you using a 32 bits or a 64 bits machine?
Jacques
On 05/19/2011 05:50 PM, Bernd Weber wrote:
Hi,
the last kernel slusb worked with was 2.6.18.2-34-default, Suse 10.2
with slmodem-2.9.10.
I compiled the latest version on SuSe 11.4. But slusb wasn't compiled,
only slamr. I tediously searched the site of linmodem, but didn't find
an answer whats to do. SuSe 11.4 comes with kernel 2.6.37
The Modem in question is a Fujitsu Siemens USB-Modem.
As I said, it works fine with older kernels and older Versions of
slmodem.
If there is some programming to be done, please let me know. Though I am
much better in Perl than in C/C++, if necessary I would try to solve the
problems.
Could somebody give me a short briefing?
Greetings
Bernd
