Hi Antonio, thank you for the link. The slusb.ko is compiled now. But a "make install" only installs the slamr.ko into the /lib/modules/kernel/extra-directory. Even when I copy the module manually, modprobe doesen't find the module: modprobe slusb Do you have any ideas? Regards Bernd Antonio Olivares schrieb: > Bernd, > > Please check the following pages out: > > http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883918.html > > http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883985.html > > http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg884183.html > > Check them out and see if you can get it working on your system? > > Regards, > > Antonio > > On Thu, May 19, 2011 at 3:51 PM, Bernd Weber <weber.bernd@xxxxxxxx> wrote: > >> Hi Antonio, >> >> thanks a lot. This option carried me a step further - to the next error. >> Please find enclosed the compilation and the error-log as well. >> In the tar-ball enclosed are different patch-file. But there is no >> documentation to what file or files these shold be applied and in which >> cases. >> >> Regards >> >> Bernd >> >> Antonio Olivares schrieb: >> >>> Bernd, >>> >>> Try to use a special command make USB=1 >>> >>> $ sudo make USB=1 >>> or >>> $ make USB=1 >>> the slusb as well as the slamr driver will be compiled. Try that and >>> report back. >>> >>> Regards, >>> >>> Antonio >>> >>> >>> >>> On Thu, May 19, 2011 at 10:22 AM, Bernd Weber <weber.bernd@xxxxxxxx> wrote: >>> >>> >>>> Jacques, >>>> >>>> I am using a 32-bits machine. >>>> >>>> the URL: >>>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20110321.tar.gz >>>> >>>> My steps: >>>> >>>> tar xzvf slmodem-2.9.11-20110321.tar.gz >>>> >>>> make >>>> make install >>>> >>>> And then I learned that slusb.ko wasn't compiled. I couldn't find the >>>> reason. On some pages I got hints that there might be problems with >>>> kernels later than 2.6.24. >>>> May be I should have done further configuration efforts for slusb. But I >>>> didn't find hints what I should do. So I have the choice to experiment a >>>> few days or ask questions ;) >>>> >>>> Greetings Bernd >>>> >>>> Jacques Goldberg schrieb: >>>> >>>> >>>>> Bernd, >>>>> >>>>> Please give us the URL of the file which compiled slamr and failed >>>>> slusb - I just would like to give it a try on my machine >>>>> (because I had the necessary hardware in my office, I happend to watch >>>>> Sacha, the author of the drivers, compiling and testing them , and I >>>>> am curious to see what fails and where) >>>>> Also, are you using a 32 bits or a 64 bits machine? >>>>> >>>>> Jacques >>>>> >>>>> On 05/19/2011 05:50 PM, Bernd Weber wrote: >>>>> >>>>> >>>>>> Hi, >>>>>> >>>>>> the last kernel slusb worked with was 2.6.18.2-34-default, Suse 10.2 >>>>>> with slmodem-2.9.10. >>>>>> >>>>>> I compiled the latest version on SuSe 11.4. But slusb wasn't compiled, >>>>>> only slamr. I tediously searched the site of linmodem, but didn't find >>>>>> an answer whats to do. SuSe 11.4 comes with kernel 2.6.37 >>>>>> >>>>>> The Modem in question is a Fujitsu Siemens USB-Modem. >>>>>> As I said, it works fine with older kernels and older Versions of >>>>>> slmodem. >>>>>> >>>>>> If there is some programming to be done, please let me know. Though I am >>>>>> much better in Perl than in C/C++, if necessary I would try to solve the >>>>>> problems. >>>>>> >>>>>> Could somebody give me a short briefing? >>>>>> >>>>>> Greetings >>>>>> >>>>>> Bernd >>>>>> >>>>>> >>> >> >>
