Bernd, Please check the following pages out: http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883918.html http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg883985.html http://www.mail-archive.com/debian-bugs-dist@xxxxxxxxxxxxxxxx/msg884183.html Check them out and see if you can get it working on your system? Regards, Antonio On Thu, May 19, 2011 at 3:51 PM, Bernd Weber <weber.bernd@xxxxxxxx> wrote: > Hi Antonio, > > thanks a lot. This option carried me a step further - to the next error. > Please find enclosed the compilation and the error-log as well. > In the tar-ball enclosed are different patch-file. But there is no > documentation to what file or files these shold be applied and in which > cases. > > Regards > > Bernd > > Antonio Olivares schrieb: >> Bernd, >> >> Try to use a special command make USB=1 >> >> $ sudo make USB=1 >> or >> $ make USB=1 >> the slusb as well as the slamr driver will be compiled. Try that and >> report back. >> >> Regards, >> >> Antonio >> >> >> >> On Thu, May 19, 2011 at 10:22 AM, Bernd Weber <weber.bernd@xxxxxxxx> wrote: >> >>> Jacques, >>> >>> I am using a 32-bits machine. >>> >>> the URL: >>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20110321.tar.gz >>> >>> My steps: >>> >>> tar xzvf slmodem-2.9.11-20110321.tar.gz >>> >>> make >>> make install >>> >>> And then I learned that slusb.ko wasn't compiled. I couldn't find the >>> reason. On some pages I got hints that there might be problems with >>> kernels later than 2.6.24. >>> May be I should have done further configuration efforts for slusb. But I >>> didn't find hints what I should do. So I have the choice to experiment a >>> few days or ask questions ;) >>> >>> Greetings Bernd >>> >>> Jacques Goldberg schrieb: >>> >>>> Bernd, >>>> >>>> Please give us the URL of the file which compiled slamr and failed >>>> slusb - I just would like to give it a try on my machine >>>> (because I had the necessary hardware in my office, I happend to watch >>>> Sacha, the author of the drivers, compiling and testing them , and I >>>> am curious to see what fails and where) >>>> Also, are you using a 32 bits or a 64 bits machine? >>>> >>>> Jacques >>>> >>>> On 05/19/2011 05:50 PM, Bernd Weber wrote: >>>> >>>>> Hi, >>>>> >>>>> the last kernel slusb worked with was 2.6.18.2-34-default, Suse 10.2 >>>>> with slmodem-2.9.10. >>>>> >>>>> I compiled the latest version on SuSe 11.4. But slusb wasn't compiled, >>>>> only slamr. I tediously searched the site of linmodem, but didn't find >>>>> an answer whats to do. SuSe 11.4 comes with kernel 2.6.37 >>>>> >>>>> The Modem in question is a Fujitsu Siemens USB-Modem. >>>>> As I said, it works fine with older kernels and older Versions of >>>>> slmodem. >>>>> >>>>> If there is some programming to be done, please let me know. Though I am >>>>> much better in Perl than in C/C++, if necessary I would try to solve the >>>>> problems. >>>>> >>>>> Could somebody give me a short briefing? >>>>> >>>>> Greetings >>>>> >>>>> Bernd >>>>> >>> >> >> > > >
