Hi Antonio, thanks a lot. This option carried me a step further - to the next error. Please find enclosed the compilation and the error-log as well. In the tar-ball enclosed are different patch-file. But there is no documentation to what file or files these shold be applied and in which cases. Regards Bernd Antonio Olivares schrieb: > Bernd, > > Try to use a special command make USB=1 > > $ sudo make USB=1 > or > $ make USB=1 > the slusb as well as the slamr driver will be compiled. Try that and > report back. > > Regards, > > Antonio > > > > On Thu, May 19, 2011 at 10:22 AM, Bernd Weber <weber.bernd@xxxxxxxx> wrote: > >> Jacques, >> >> I am using a 32-bits machine. >> >> the URL: >> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20110321.tar.gz >> >> My steps: >> >> tar xzvf slmodem-2.9.11-20110321.tar.gz >> >> make >> make install >> >> And then I learned that slusb.ko wasn't compiled. I couldn't find the >> reason. On some pages I got hints that there might be problems with >> kernels later than 2.6.24. >> May be I should have done further configuration efforts for slusb. But I >> didn't find hints what I should do. So I have the choice to experiment a >> few days or ask questions ;) >> >> Greetings Bernd >> >> Jacques Goldberg schrieb: >> >>> Bernd, >>> >>> Please give us the URL of the file which compiled slamr and failed >>> slusb - I just would like to give it a try on my machine >>> (because I had the necessary hardware in my office, I happend to watch >>> Sacha, the author of the drivers, compiling and testing them , and I >>> am curious to see what fails and where) >>> Also, are you using a 32 bits or a 64 bits machine? >>> >>> Jacques >>> >>> On 05/19/2011 05:50 PM, Bernd Weber wrote: >>> >>>> Hi, >>>> >>>> the last kernel slusb worked with was 2.6.18.2-34-default, Suse 10.2 >>>> with slmodem-2.9.10. >>>> >>>> I compiled the latest version on SuSe 11.4. But slusb wasn't compiled, >>>> only slamr. I tediously searched the site of linmodem, but didn't find >>>> an answer whats to do. SuSe 11.4 comes with kernel 2.6.37 >>>> >>>> The Modem in question is a Fujitsu Siemens USB-Modem. >>>> As I said, it works fine with older kernels and older Versions of >>>> slmodem. >>>> >>>> If there is some programming to be done, please let me know. Though I am >>>> much better in Perl than in C/C++, if necessary I would try to solve the >>>> problems. >>>> >>>> Could somebody give me a short briefing? >>>> >>>> Greetings >>>> >>>> Bernd >>>> >> > >
/home/bernd/src/slmodem-2.9.11-20110321/drivers/amrmo_init.c: In function â??amrmo_unlocked_ioctlâ??: /home/bernd/src/slmodem-2.9.11-20110321/drivers/amrmo_init.c:450:17: warning: ignoring return value of â??copy_from_userâ??, declared with attribute warn_unused_result /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c:1206:2: error: unknown field â??ownerâ?? specified in initializer /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c:1206:2: warning: initialization from incompatible pointer type /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c: In function â??st7554_probeâ??: /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c:1342:2: warning: passing argument 2 of â??device_createâ?? makes pointer from integer without a cast /usr/src/linux-2.6.37.1-1.2/include/linux/device.h:598:23: note: expected â??struct device *â?? but argument is of type â??intâ?? /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c:1342:2: warning: passing argument 3 of â??device_createâ?? makes integer from pointer without a cast /usr/src/linux-2.6.37.1-1.2/include/linux/device.h:598:23: note: expected â??dev_tâ?? but argument is of type â??void *â?? /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.c:1342:2: warning: passing argument 5 of â??device_createâ?? makes pointer from integer without a cast /usr/src/linux-2.6.37.1-1.2/include/linux/device.h:598:23: note: expected â??const char *â?? but argument is of type â??intâ?? make[6]: *** [/home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.o] Fehler 1 make[5]: *** [_module_/home/bernd/src/slmodem-2.9.11-20110321/drivers] Fehler 2 make[4]: *** [sub-make] Fehler 2 make[3]: *** [all] Fehler 2 make[2]: *** [all] Fehler 2 make[1]: *** [all] Fehler 2 make: *** [drivers] Fehler 2
make -C modem all make[1]: Entering directory `/home/bernd/src/slmodem-2.9.11-20110321/modem' rebuild profile... gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c modem_cmdline.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c modem_datafile.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c modem_timer.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c modem_param.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c modem_debug.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c homolog_data.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c sysdep_common.c gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o make[1]: Leaving directory `/home/bernd/src/slmodem-2.9.11-20110321/modem' make -C drivers KERNEL_DIR=/lib/modules/2.6.37.1-1.2-default/build make[1]: Entering directory `/home/bernd/src/slmodem-2.9.11-20110321/drivers' doing kernel-ver:: cc -I/lib/modules/2.6.37.1-1.2-default/build/include -o kernel-ver kernel-ver.c make all KERNEL_VER=2.6.37.1-1.2-default make[2]: Entering directory `/home/bernd/src/slmodem-2.9.11-20110321/drivers' obj-m=slamr.o slusb.o slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o make modules -C /lib/modules/2.6.37.1-1.2-default/build SUBDIRS=/home/bernd/src/slmodem-2.9.11-20110321/drivers make[3]: Entering directory `/usr/src/linux-2.6.37.1-1.2-obj/i386/default' make -C ../../../linux-2.6.37.1-1.2 O=/usr/src/linux-2.6.37.1-1.2-obj/i386/default/. modules CC [M] /home/bernd/src/slmodem-2.9.11-20110321/drivers/amrmo_init.o CC [M] /home/bernd/src/slmodem-2.9.11-20110321/drivers/sysdep_amr.o CC [M] /home/bernd/src/slmodem-2.9.11-20110321/drivers/st7554.o make[3]: Leaving directory `/usr/src/linux-2.6.37.1-1.2-obj/i386/default' make[2]: Leaving directory `/home/bernd/src/slmodem-2.9.11-20110321/drivers' make[1]: Leaving directory `/home/bernd/src/slmodem-2.9.11-20110321/drivers'
