Cntrl-C kills slmodemd, so nothing will work after that. Linux typically support any number of consoles, check with Centos assistance on how to other more. But you can alternately do: # slmodemd -c GERMANY --alsa modem:1 & where & means "put the process into the background". Thus you can still use the same console for other commands. Later # fg slmodemd will bring slmodemd "into the fore ground", so that it can be stopped with Ctrl-C MarvS On Fri, Feb 5, 2010 at 10:15 AM, sherif omran <sherif.omran@xxxxxx> wrote: > I have only one consule (command line) and don't know how to create a second consule, i don't have KDE or Gnome. > > when i give ./slmodem -c GERMANY --alsa modem:1 > It reports symbolic link created, press Ctrl+C for termination. > > I pressed Ctrl+C and gave > ls -l /dev/ttySL0 /dev/pts/* > output: > > ls: /dev/ttySL0: No such file or directory > ls: /dev/pts/* : No such file or directory > > # > > Is it possible to create the link manually with ln? > > regards, > sherif > > > > -------- Original-Nachricht -------- >> Datum: Fri, 5 Feb 2010 08:32:55 -0500 >> Von: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> An: sherif omran <sherif.omran@xxxxxx> >> CC: discuss@xxxxxxxxxxxxx >> Betreff: Re: Installing modem driver under linux Centos > >> Sherif, >> >> If slmodemd was installed to /usr/sbin/slmodemd, as indicated by the >> success: >> > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 >> > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created >> > modem 'modem:1' created. TTY is '/dev/pts/0' >> > use '/dev/ttySL0' as modem device >> If will suffice in the future to run as Admin/Root: >> # slmodemd -c GERMANY --alsa modem:1 >> >> Check again for the port creation with: >> # ls -l /dev/ttySL0 /dev/pts/* >> Note that this "0" is a "zero", not the capital letter O >> >> Leaving slmodemd active, open a 2nd console and as Root: >> # wvdialconf >> >> Read the wvdial.txt for details. >> >> MarvS >> >> >> >> On Fri, Feb 5, 2010 at 4:23 AM, sherif omran <sherif.omran@xxxxxx> wrote: >> > Hi Marv, >> > >> > applying the command >> > >> > ./slmodem -c GERMANY --alsa modem:1 >> > >> > results in an output >> > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 >> > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created >> > modem 'modem:1' created. TTY is '/dev/pts/0' >> > use '/dev/ttySL0' as modem device >> > >> > Now searching for the symbolic link >> > >> > ls /dev/ttySL0 >> > >> > i don't see it???? >> > >> > going next to wvdial >> > >> > wvdial produces >> > >> > --> WvDial: Internet dialer version 1.54.0 >> > --> Cannot open /dev/ttySL0: No such file or directory >> > >> > >> > In WvDial.conf i have >> > [Dialer Defaults] >> > Modem = /dev/ttySL0 >> > Baud = 9600 >> > Init = ATZ >> > Init2 = AT S11=50 >> > Carrier Check = no >> > >> > [Dialer pulse] >> > Dial Command = ATDP >> > >> > >> > >> > any idea how to continue? >> > >> > thanks in advance, >> > kind regards, >> > >> > Sherif >> > >> > >> > >> > -------- Original-Nachricht -------- >> >> Datum: Thu, 4 Feb 2010 19:28:45 -0500 >> >> Von: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> >> An: Sherif Omran <sherif.omran@xxxxxx> >> >> CC: discuss@xxxxxxxxxxxxx >> >> Betreff: Re: Installing modem driver under linux Centos >> > >> >> Sherif >> >> >> >> Under >> >> CPU=i686, CentOS release 5.4 (Final) >> >> Linux version 2.6.18-92.1.22.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc >> >> version 4.1 >> >> >> >> with >> >> "Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller " >> >> CLASS=0703 >> >> PCIDEV=1039:7013 >> >> SUBSYS=17c0:1059 >> >> IRQ=11 >> >> SOFT=1039:7013.MC97 >> >> CodecArchived=SIL27 >> >> CodecDiagnosed=SIL27 >> >> CodecClass=SIL >> >> IDENT=slmodemd >> >> SLMODEMD_DEVICE=modem:1 >> >> Driver=snd-intel8x0m >> >> >> >> Support type needed or chipset: slmodemd >> >> --------------------- >> >> An ALSA (Advanced Linux Sound Architecture) modem driver: >> snd-intel8x0m >> >> provides Low Level support enabling contact with the modem hardware. >> >> Complementary High Level support is through a Smartlink utility: >> >> slmodemd >> >> >> >> Download from http://linmodems.technion.ac.il/packages/smartlink/ >> >> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack >> >> under Linux with: >> >> $ tar zxf SLMODEMD.gcc4.1.tar.gz >> >> and read instructions therein. But briefly, the modem is setup with >> >> command: >> >> slmodemd -c GERMANY --alsa modem:1 >> >> reporting dynamic creation of ports: >> >> /dev/ttySL0 --> /dev/pts/N , with N some number >> >> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >> >> through guidance. >> >> >> >> Read the occapanying documentation. >> >> To /etc/wvdial.conf there should be added a line: >> >> Carrier Check = no >> >> >> >> MarvS >> >> >> >> On Thu, Feb 4, 2010 at 3:41 PM, Sherif Omran <sherif.omran@xxxxxx> >> wrote: >> >> > Hi Marvin, >> >> > >> >> > here is the ModemData.txt file. I would appreciate if any body can >> help >> >> me. >> >> > >> >> > waiting your reply, >> >> > >> >> > regards, >> >> > Sheirf >> >> > >> >> > >> >> > On 2/4/2010 2:10 AM, Marvin Stodolsky wrote: >> >> >> >> >> >> Sherif >> >> >> >> >> >> Sorry I overlooked that you already ran scanModem. >> >> >> Please send us the entire ModemData.txt that was ouput. >> >> >> >> >> >> MarvS >> >> >> >> >> >> >> >> >> On Wed, Feb 3, 2010 at 8:08 PM, Marvin Stodolsky >> >> >> <marvin.stodolsky@xxxxxxxxx> wrote: >> >> >> >> >> >>> >> >> >>> Sherif >> >> >>> >> >> >>> Modem - Lucent Technologies Soft Modem AMR >> >> >>> will be supported by your onboard snd-intel8x0m driver, plus a >> >> >>> slmodemd helper utility. >> >> >>> To get details >> >> >>> Browse http://linmodems.technion.ac.il and download >> scanModem.gz . >> >> >>> Within a Linux partition >> >> >>> gunzip scanModem.gz >> >> >>> To make it executable: >> >> >>> chmod +x scanModem >> >> >>> Run diagnositics with: >> >> >>> ./scanModem >> >> >>> >> >> >>> MarvS >> >> >>> >> >> >>> On Wed, Feb 3, 2010 at 7:55 PM, Sherif Omran<sherif.omran@xxxxxx> >> >> wrote: >> >> >>> >> >> >>>> >> >> >>>> Dear developers, >> >> >>>> >> >> >>>> I am trying to install my modem under centos. My modem is Ambit >> >> T60M283 >> >> >>>> in a >> >> >>>> fujitsu siemens Amilo D 6820, there is a driver under windows >> >> >>>> >> >> >>>> >> >> >>>> >> >> >> http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=04C90241-F78F-4677-B9DD-647E410044EC&OSID=665F4A20-6E31-43C3-82C2-D98CE773007C&Status=True&Component=Ambit%20T60M283 >> >> >>>> >> >> >>>> When i tried to use scanmodem, it detects an SIS sound card >> available >> >> >>>> but >> >> >>>> the lucent modem is not detected. >> >> >>>> >> >> >>>> Could any body please help >> >> >>>> >> >> >>>> thanks in advance >> >> >>>> kind regards, >> >> >>>> Sherif >> >> >>>> >> >> >>>> >> >> >>>> >> >> >>>> >> >> >>> >> >> >>> >> >> >> >> >> >> >> >> > >> > >> > -- >> > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! >> > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 >> > > > -- > Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - > sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser >
