Sherif, If slmodemd was installed to /usr/sbin/slmodemd, as indicated by the success: > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created > modem 'modem:1' created. TTY is '/dev/pts/0' > use '/dev/ttySL0' as modem device If will suffice in the future to run as Admin/Root: # slmodemd -c GERMANY --alsa modem:1 Check again for the port creation with: # ls -l /dev/ttySL0 /dev/pts/* Note that this "0" is a "zero", not the capital letter O Leaving slmodemd active, open a 2nd console and as Root: # wvdialconf Read the wvdial.txt for details. MarvS On Fri, Feb 5, 2010 at 4:23 AM, sherif omran <sherif.omran@xxxxxx> wrote: > Hi Marv, > > applying the command > > ./slmodem -c GERMANY --alsa modem:1 > > results in an output > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created > modem 'modem:1' created. TTY is '/dev/pts/0' > use '/dev/ttySL0' as modem device > > Now searching for the symbolic link > > ls /dev/ttySL0 > > i don't see it???? > > going next to wvdial > > wvdial produces > > --> WvDial: Internet dialer version 1.54.0 > --> Cannot open /dev/ttySL0: No such file or directory > > > In WvDial.conf i have > [Dialer Defaults] > Modem = /dev/ttySL0 > Baud = 9600 > Init = ATZ > Init2 = AT S11=50 > Carrier Check = no > > [Dialer pulse] > Dial Command = ATDP > > > > any idea how to continue? > > thanks in advance, > kind regards, > > Sherif > > > > -------- Original-Nachricht -------- >> Datum: Thu, 4 Feb 2010 19:28:45 -0500 >> Von: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> An: Sherif Omran <sherif.omran@xxxxxx> >> CC: discuss@xxxxxxxxxxxxx >> Betreff: Re: Installing modem driver under linux Centos > >> Sherif >> >> Under >> CPU=i686, CentOS release 5.4 (Final) >> Linux version 2.6.18-92.1.22.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc >> version 4.1 >> >> with >> "Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller " >> CLASS=0703 >> PCIDEV=1039:7013 >> SUBSYS=17c0:1059 >> IRQ=11 >> SOFT=1039:7013.MC97 >> CodecArchived=SIL27 >> CodecDiagnosed=SIL27 >> CodecClass=SIL >> IDENT=slmodemd >> SLMODEMD_DEVICE=modem:1 >> Driver=snd-intel8x0m >> >> Support type needed or chipset: slmodemd >> --------------------- >> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m >> provides Low Level support enabling contact with the modem hardware. >> Complementary High Level support is through a Smartlink utility: >> slmodemd >> >> Download from http://linmodems.technion.ac.il/packages/smartlink/ >> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack >> under Linux with: >> $ tar zxf SLMODEMD.gcc4.1.tar.gz >> and read instructions therein. But briefly, the modem is setup with >> command: >> slmodemd -c GERMANY --alsa modem:1 >> reporting dynamic creation of ports: >> /dev/ttySL0 --> /dev/pts/N , with N some number >> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >> through guidance. >> >> Read the occapanying documentation. >> To /etc/wvdial.conf there should be added a line: >> Carrier Check = no >> >> MarvS >> >> On Thu, Feb 4, 2010 at 3:41 PM, Sherif Omran <sherif.omran@xxxxxx> wrote: >> > Hi Marvin, >> > >> > here is the ModemData.txt file. I would appreciate if any body can help >> me. >> > >> > waiting your reply, >> > >> > regards, >> > Sheirf >> > >> > >> > On 2/4/2010 2:10 AM, Marvin Stodolsky wrote: >> >> >> >> Sherif >> >> >> >> Sorry I overlooked that you already ran scanModem. >> >> Please send us the entire ModemData.txt that was ouput. >> >> >> >> MarvS >> >> >> >> >> >> On Wed, Feb 3, 2010 at 8:08 PM, Marvin Stodolsky >> >> <marvin.stodolsky@xxxxxxxxx> wrote: >> >> >> >>> >> >>> Sherif >> >>> >> >>> Modem - Lucent Technologies Soft Modem AMR >> >>> will be supported by your onboard snd-intel8x0m driver, plus a >> >>> slmodemd helper utility. >> >>> To get details >> >>> Browse http://linmodems.technion.ac.il and download scanModem.gz . >> >>> Within a Linux partition >> >>> gunzip scanModem.gz >> >>> To make it executable: >> >>> chmod +x scanModem >> >>> Run diagnositics with: >> >>> ./scanModem >> >>> >> >>> MarvS >> >>> >> >>> On Wed, Feb 3, 2010 at 7:55 PM, Sherif Omran<sherif.omran@xxxxxx> >> wrote: >> >>> >> >>>> >> >>>> Dear developers, >> >>>> >> >>>> I am trying to install my modem under centos. My modem is Ambit >> T60M283 >> >>>> in a >> >>>> fujitsu siemens Amilo D 6820, there is a driver under windows >> >>>> >> >>>> >> >>>> >> http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=04C90241-F78F-4677-B9DD-647E410044EC&OSID=665F4A20-6E31-43C3-82C2-D98CE773007C&Status=True&Component=Ambit%20T60M283 >> >>>> >> >>>> When i tried to use scanmodem, it detects an SIS sound card available >> >>>> but >> >>>> the lucent modem is not detected. >> >>>> >> >>>> Could any body please help >> >>>> >> >>>> thanks in advance >> >>>> kind regards, >> >>>> Sherif >> >>>> >> >>>> >> >>>> >> >>>> >> >>> >> >>> >> >> >> >> >> > > > -- > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 >
