I have only one consule (command line) and don't know how to create a second consule, i don't have KDE or Gnome. when i give ./slmodem -c GERMANY --alsa modem:1 It reports symbolic link created, press Ctrl+C for termination. I pressed Ctrl+C and gave ls -l /dev/ttySL0 /dev/pts/* output: ls: /dev/ttySL0: No such file or directory ls: /dev/pts/* : No such file or directory # Is it possible to create the link manually with ln? regards, sherif -------- Original-Nachricht -------- > Datum: Fri, 5 Feb 2010 08:32:55 -0500 > Von: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > An: sherif omran <sherif.omran@xxxxxx> > CC: discuss@xxxxxxxxxxxxx > Betreff: Re: Installing modem driver under linux Centos > Sherif, > > If slmodemd was installed to /usr/sbin/slmodemd, as indicated by the > success: > > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 > > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created > > modem 'modem:1' created. TTY is '/dev/pts/0' > > use '/dev/ttySL0' as modem device > If will suffice in the future to run as Admin/Root: > # slmodemd -c GERMANY --alsa modem:1 > > Check again for the port creation with: > # ls -l /dev/ttySL0 /dev/pts/* > Note that this "0" is a "zero", not the capital letter O > > Leaving slmodemd active, open a 2nd console and as Root: > # wvdialconf > > Read the wvdial.txt for details. > > MarvS > > > > On Fri, Feb 5, 2010 at 4:23 AM, sherif omran <sherif.omran@xxxxxx> wrote: > > Hi Marv, > > > > applying the command > > > > ./slmodem -c GERMANY --alsa modem:1 > > > > results in an output > > Smartlink Soft Modem: Version 2.9.11 Feb 17 2008 09:31:10 > > symbolic link '/dev/ttySL0' -> '/dev/pts/0' created > > modem 'modem:1' created. TTY is '/dev/pts/0' > > use '/dev/ttySL0' as modem device > > > > Now searching for the symbolic link > > > > ls /dev/ttySL0 > > > > i don't see it???? > > > > going next to wvdial > > > > wvdial produces > > > > --> WvDial: Internet dialer version 1.54.0 > > --> Cannot open /dev/ttySL0: No such file or directory > > > > > > In WvDial.conf i have > > [Dialer Defaults] > > Modem = /dev/ttySL0 > > Baud = 9600 > > Init = ATZ > > Init2 = AT S11=50 > > Carrier Check = no > > > > [Dialer pulse] > > Dial Command = ATDP > > > > > > > > any idea how to continue? > > > > thanks in advance, > > kind regards, > > > > Sherif > > > > > > > > -------- Original-Nachricht -------- > >> Datum: Thu, 4 Feb 2010 19:28:45 -0500 > >> Von: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > >> An: Sherif Omran <sherif.omran@xxxxxx> > >> CC: discuss@xxxxxxxxxxxxx > >> Betreff: Re: Installing modem driver under linux Centos > > > >> Sherif > >> > >> Under > >> CPU=i686, CentOS release 5.4 (Final) > >> Linux version 2.6.18-92.1.22.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc > >> version 4.1 > >> > >> with > >> "Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller " > >> CLASS=0703 > >> PCIDEV=1039:7013 > >> SUBSYS=17c0:1059 > >> IRQ=11 > >> SOFT=1039:7013.MC97 > >> CodecArchived=SIL27 > >> CodecDiagnosed=SIL27 > >> CodecClass=SIL > >> IDENT=slmodemd > >> SLMODEMD_DEVICE=modem:1 > >> Driver=snd-intel8x0m > >> > >> Support type needed or chipset: slmodemd > >> --------------------- > >> An ALSA (Advanced Linux Sound Architecture) modem driver: > snd-intel8x0m > >> provides Low Level support enabling contact with the modem hardware. > >> Complementary High Level support is through a Smartlink utility: > >> slmodemd > >> > >> Download from http://linmodems.technion.ac.il/packages/smartlink/ > >> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack > >> under Linux with: > >> $ tar zxf SLMODEMD.gcc4.1.tar.gz > >> and read instructions therein. But briefly, the modem is setup with > >> command: > >> slmodemd -c GERMANY --alsa modem:1 > >> reporting dynamic creation of ports: > >> /dev/ttySL0 --> /dev/pts/N , with N some number > >> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow > >> through guidance. > >> > >> Read the occapanying documentation. > >> To /etc/wvdial.conf there should be added a line: > >> Carrier Check = no > >> > >> MarvS > >> > >> On Thu, Feb 4, 2010 at 3:41 PM, Sherif Omran <sherif.omran@xxxxxx> > wrote: > >> > Hi Marvin, > >> > > >> > here is the ModemData.txt file. I would appreciate if any body can > help > >> me. > >> > > >> > waiting your reply, > >> > > >> > regards, > >> > Sheirf > >> > > >> > > >> > On 2/4/2010 2:10 AM, Marvin Stodolsky wrote: > >> >> > >> >> Sherif > >> >> > >> >> Sorry I overlooked that you already ran scanModem. > >> >> Please send us the entire ModemData.txt that was ouput. > >> >> > >> >> MarvS > >> >> > >> >> > >> >> On Wed, Feb 3, 2010 at 8:08 PM, Marvin Stodolsky > >> >> <marvin.stodolsky@xxxxxxxxx> wrote: > >> >> > >> >>> > >> >>> Sherif > >> >>> > >> >>> Modem - Lucent Technologies Soft Modem AMR > >> >>> will be supported by your onboard snd-intel8x0m driver, plus a > >> >>> slmodemd helper utility. > >> >>> To get details > >> >>> Browse http://linmodems.technion.ac.il and download > scanModem.gz . > >> >>> Within a Linux partition > >> >>> gunzip scanModem.gz > >> >>> To make it executable: > >> >>> chmod +x scanModem > >> >>> Run diagnositics with: > >> >>> ./scanModem > >> >>> > >> >>> MarvS > >> >>> > >> >>> On Wed, Feb 3, 2010 at 7:55 PM, Sherif Omran<sherif.omran@xxxxxx> > >> wrote: > >> >>> > >> >>>> > >> >>>> Dear developers, > >> >>>> > >> >>>> I am trying to install my modem under centos. My modem is Ambit > >> T60M283 > >> >>>> in a > >> >>>> fujitsu siemens Amilo D 6820, there is a driver under windows > >> >>>> > >> >>>> > >> >>>> > >> > http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=04C90241-F78F-4677-B9DD-647E410044EC&OSID=665F4A20-6E31-43C3-82C2-D98CE773007C&Status=True&Component=Ambit%20T60M283 > >> >>>> > >> >>>> When i tried to use scanmodem, it detects an SIS sound card > available > >> >>>> but > >> >>>> the lucent modem is not detected. > >> >>>> > >> >>>> Could any body please help > >> >>>> > >> >>>> thanks in advance > >> >>>> kind regards, > >> >>>> Sherif > >> >>>> > >> >>>> > >> >>>> > >> >>>> > >> >>> > >> >>> > >> >> > >> >> > >> > > > > > -- > > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! > > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 > > -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser
