Kevin, > MODULES_FINAL=isofs binfmt_misc joydev psmouse fbcon tileblit font > bitblit softcursor i915 drm i2c_algo_bit intel_agp agpgart video > output Unloading the other (possibly conflicting modules) shouldn't be taken to the extreme. For example, the agrmodem and agrserial modules depend on the snd_hda_intel modules, and maybe other audio chip -related modules. For example, on my system: $ lsmod | grep snd snd_hda_codec_realtek 199232 1 snd_hda_intel 25832 2 snd_hda_codec 64508 3 agrmodem,snd_hda_codec_realtek,snd_hda_intel snd_pcm_oss 25600 0 snd_pcm 73664 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 6272 0 snd_rawmidi 21152 1 snd_seq_midi snd_seq_midi_event 6972 1 snd_seq_midi snd_seq 48304 2 snd_seq_midi,snd_seq_midi_event snd_timer 20612 2 snd_pcm,snd_seq snd_seq_device 7016 3 snd_seq_midi,snd_rawmidi,snd_seq snd 56484 14 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7200 1 snd snd_page_alloc 8932 2 snd_hda_intel,snd_pcm -- Nick Zhuravlev www.auriga.com On Tue, Feb 02, 2010 at 02:55:10AM -0200, Kevin Fernandez <siegfri3d@xxxxxxxxx> wrote: > Hello Bjorn, > I have ALSA 1.0.20, the package i've used right now is > agrsm-11c11040-2.1.80~20091225.tar.bz2 > I've used dodkms and a kernel i didn't use before (2.6.31-16-generic). > I've booted into that kernel, ran twice Marv's unloading script (if i > run it twice it unloads more): > > MODULES_FINAL=isofs binfmt_misc joydev psmouse fbcon tileblit font > bitblit softcursor i915 drm i2c_algo_bit intel_agp agpgart video > output > > then loaded agrmodem and agrserial: > [ 112.493879] * Hello Agere Driver ** > [ 112.493950] usbcore: registered new interface driver agr12dec2006 > [ 112.970170] alloc irq_desc for 20 on node -1 > [ 112.970174] alloc kstat_irqs on node -1 > [ 112.970182] pci 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 115.917518] Loading module Agere Modem Controller driver version > 2.1.80 (2007-10-01) > [ 115.917525] Disabling lock debugging due to kernel taint > [ 123.858338] serial8250_register_ports: BaseAddress 0x8004 Irq 20 > [ 123.858350] ttyAGS3 at I/O 0x8004 (irq = 20) is a AgereModem > [ 123.858455] agrserial - ret_val 0, call: lt_modem_ops.init_modem > [ 123.858463] Loading module Agere Modem Interface driver version > 2.1.80.0 (2007-10-01) > > (is this rev_val 0 line normal?) > Made a symlink /dev/modem to /dev/ttyAGS3 and /dev/ttySAGS to > /dev/ttyAGS3 (i think i read somewhere to do this for wvdialconf to > find the modem). > > Ran sudo wvdialconf /etc/wvdial.conf (instead of wvdial this time) and got this: > > [ 181.005484] ==> codecType = 0x32 > [ 181.005512] BUG: unable to handle kernel NULL pointer dereference at 00000168 > [ 181.005523] IP: [<f8f68818>] azlGetResourceInformation+0x8/0x60 [agrmodem] > [ 181.005592] *pde = 7f322067 > [ 181.005599] Oops: 0000 [#1] SMP > [ 181.005607] last sysfs file: /sys/devices/system/cpu/cpu1/topology/core_id > [ 181.005614] Modules linked in: agrserial agrmodem snd_hda_codec > snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss > snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer > snd_seq_device snd soundcore snd_page_alloc isofs binfmt_misc joydev > psmouse fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit > intel_agp agpgart video output [last unloaded: wlan] > [ 181.005692] > [ 181.005701] Pid: 5655, comm: wvdialconf Tainted: P > (2.6.31-16-generic #53-Ubuntu) MSI Notebook VR601 > [ 181.005708] EIP: 0060:[<f8f68818>] EFLAGS: 00010286 CPU: 0 > [ 181.005766] EIP is at azlGetResourceInformation+0x8/0x60 [agrmodem] > [ 181.005773] EAX: 00000000 EBX: f86af0c4 ECX: 00000000 EDX: 0000020b > [ 181.005779] ESI: f86af0c4 EDI: f86af028 EBP: f02efd00 ESP: f02efd00 > [ 181.005785] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 181.005792] Process wvdialconf (pid: 5655, ti=f02ee000 > task=f02a3240 task.ti=f02ee000) > [ 181.005797] Stack: > [ 181.005801] f02efd20 f8f53769 f86b95e9 f86b95ea f02efd20 c056ea7c > f8f81c93 f02efd6f > [ 181.005818] <0> f02efd90 f8f3c9f1 f86af0c4 f8521048 00000008 > 00000001 f86af39c 00000004 > [ 181.005837] <0> c162c2a0 00000000 c0784e40 00000000 c01b7e2d > 00000001 00000041 ffffffff > [ 181.005857] Call Trace: > [ 181.005934] [<f8f53769>] ? CAzlIntelInit+0x2d/0x3c4 [agrmodem] > [ 181.005952] [<c056ea7c>] ? printk+0x18/0x1c > [ 181.006038] [<f8f3c9f1>] ? LXHardwareStart+0x11de/0x13fb [agrmodem] > [ 181.006057] [<c01b7e2d>] ? get_page_from_freelist+0x1bd/0x360 > [ 181.006066] [<c0570e3a>] ? _spin_lock_irqsave+0x2a/0x40 > [ 181.006153] [<f8f381a8>] ? linux_modem_open+0x45/0x10e [agrmodem] > [ 181.006167] [<c0150c2b>] ? mod_timer+0xcb/0x140 > [ 181.006226] [<f8e922a8>] ? wrap_linux_modem_open+0x8/0x10 [agrmodem] > [ 181.006284] [<f8e92308>] ? modemPortOpen+0x8/0x20 [agrmodem] > [ 181.006296] [<f857cfe0>] ? serial8250_startup+0x210/0x380 [agrserial] > [ 181.006308] [<c0399376>] ? uart_startup+0x46/0x140 > [ 181.006317] [<c0399eb2>] ? uart_open+0x102/0x220 > [ 181.006326] [<c0380f53>] ? __tty_open+0x1a3/0x460 > [ 181.006335] [<c038122f>] ? tty_open+0x1f/0x40 > [ 181.006344] [<c01eaa5d>] ? chrdev_open+0xcd/0x190 > [ 181.006353] [<c01e5a39>] ? __dentry_open+0xb9/0x230 > [ 181.006361] [<c01e5c95>] ? nameidata_to_filp+0x55/0x70 > [ 181.006370] [<c01ea990>] ? chrdev_open+0x0/0x190 > [ 181.006379] [<c01f39ea>] ? do_filp_open+0x53a/0x890 > [ 181.006389] [<c01e57d0>] ? do_sys_open+0x50/0x150 > [ 181.006397] [<c01e9285>] ? fput+0x15/0x20 > [ 181.006405] [<c01e56a7>] ? filp_close+0x47/0x70 > [ 181.006412] [<c01e5939>] ? sys_open+0x29/0x40 > [ 181.006421] [<c010336c>] ? syscall_call+0x7/0xb > [ 181.006426] Code: 10 75 e8 b8 fd ff ff ff 5d c3 90 31 c0 5d c3 8d > 74 26 00 89 15 ac b0 fb f8 8b 42 04 5d 83 e0 0f c3 66 90 a1 e0 50 63 > fd 55 89 e5 <8b> 80 68 01 00 00 8b 48 74 31 c0 90 8d 74 26 00 8b 54 81 > 34 85 > [ 181.006535] EIP: [<f8f68818>] azlGetResourceInformation+0x8/0x60 > [agrmodem] SS:ESP 0068:f02efd00 > [ 181.006598] CR2: 0000000000000168 > [ 181.006606] ---[ end trace c5d7e7cd560c2388 ]--- > > > After this i tried to boot in rescue mode (only with terminal) to have > even less modules loaded, ran unloading twice, tried wvdial, same.. > Everytime i have this, the device is busy after and i have to reboot. > > Thanks for your time! > Kevin > > 2010/2/1 Bjorn Wielens <Uniacke1@xxxxxxxx>: > > Marv, Kevin: > > Just a heads up- These crashes/segfaults almost ALWAYS caused by a > > mismatch between the agrsm driver version and the ALSA version on your > > computer. > > > > Which driver package are you using, and what is the output of > > 'cat /proc/asound/version'? > > > > The ALSA version for my most recently prepared tarball and its > > derivatives is 1.0.20. Any newer is not yet supported. > > > > Thanks, > > Bjorn. > > > > > > On 02/01/2010 08:37 PM, Marvin Stodolsky wrote: > >> Kevin, > >> > >> You are using the correct drivers. > >> Try detaching external devices as much as possible before bootup, and > >> shutting down non-essential programs before using the modem. You > >> could check whether the problems begin during a simple activation > >> with: > >> $ sudo wvdialconf wvtest > >> or only during an actual dialout. > >> > >> I'll also send you an "unloading" script, which tries to unload > >> non-essential modules. > >> Also try using it before modem usage as: > >> $ sudo ./unloading > >> > >> Sadly we don't have debugging capability for these drivers, because > >> there is a closed source component. > >> > >> MarvS > >> > >> On Mon, Feb 1, 2010 at 11:59 AM, Kevin Fernandez <siegfri3d@xxxxxxxxx> wrote: > >>> Sorry this was an old modemdata, i removed slmodem a long time ago.. I > >>> attached a new modemdata.txt. > >>> On windows it says: > >>> Agere Systems HDA modem > >>> Slot 1 (internal High Definition Audio bus) > >>> > >>> device ID HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11C10001&REV_1002 > >>> > >>> Thanks for the help! > >>> Kevin > >>> > >>> 2010/2/1 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: > >>>> Kevin, > >>>> > >>>> Under install the hsfmodem software. It is for Conexant modem chips > >>>> and may be interferring. > >>>> Then rerun scanModem > >>>> As described in SoftModem.txt, please get diagnostic info under Microsoft too. > >>>> > >>>> MarvS > >>>> scanModem maintainer > >>>> > >>>> > >>>> On Mon, Feb 1, 2010 at 12:57 AM, Kevin Fernandez <siegfri3d@xxxxxxxxx> wrote: > >>>>> Hello there, > >>>>> I'm trying to get my modem working for some days, still no luck. > >>>>> I've attached the modemdata. > >>>>> I compile the driver (agrsm-11c11040-2.1.80~20091225), i install it > >>>>> and load the modules, then i get: > >>>>> [ 677.293574] * Hello Agere Driver ** > >>>>> [ 677.293623] usbcore: registered new interface driver agr12dec2006 > >>>>> [ 680.664348] Loading module Agere Modem Controller driver version > >>>>> 2.1.80 (2007-10-01) > >>>>> [ 680.664354] Disabling lock debugging due to kernel taint > >>>>> [ 683.898153] serial8250_register_ports: BaseAddress 0x8004 Irq 20 > >>>>> [ 683.898160] ttyAGS3 at I/O 0x8004 (irq = 20) is a AgereModem > >>>>> [ 683.898229] agrserial - ret_val 0, call: lt_modem_ops.init_modem > >>>>> [ 683.898234] Loading module Agere Modem Interface driver version > >>>>> 2.1.80.0 (2007-10-01) > >>>>> > >>>>> > >>>>> then i fire up wvdial to use the device and i get nothing, but i have > >>>>> this in dmesg: > >>>>> > >>>>> [ 694.818705] ==> codecType = 0x32 > >>>>> [ 694.848151] BUG: unable to handle kernel NULL pointer dereference at 00000060 > >>>>> [ 694.848167] IP: [<f986a498>] ResumeCallBack+0x18/0x34 [agrmodem] > >>>>> [ 694.848264] *pde = 7e584067 > >>>>> [ 694.848271] Oops: 0000 [#1] SMP > >>>>> [ 694.848280] last sysfs file: /sys/devices/system/cpu/cpu1/topology/core_id > >>>>> [ 694.848287] Modules linked in: agrserial agrmodem isofs udf > >>>>> crc_itu_t binfmt_misc ppdev vboxnetflt vboxnetadp vboxdrv joydev > >>>>> snd_hda_codec_realtek wlan_scan_sta ath_rate_sample snd_hda_intel > >>>>> pcmcia snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm > >>>>> snd_seq_dummy uvcvideo videodev v4l1_compat sdhci_pci sdhci led_class > >>>>> yenta_socket rsrc_nonstatic pcmcia_core psmouse serio_raw iptable_nat > >>>>> nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle > >>>>> iptable_filter ip_tables x_tables ath_pci wlan ath_hal snd_seq_oss > >>>>> snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer > >>>>> snd_seq_device snd soundcore snd_page_alloc sbp2 lp parport dm_raid45 > >>>>> xor fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit > >>>>> ohci1394 ieee1394 r8169 mii intel_agp video agpgart output > >>>>> [ 694.848449] > >>>>> [ 694.848457] Pid: 7339, comm: wvdial Tainted: P > >>>>> (2.6.31-18-generic #55-Ubuntu) MSI Notebook VR601 > >>>>> [ 694.848465] EIP: 0060:[<f986a498>] EFLAGS: 00010282 CPU: 0 > >>>>> [ 694.848550] EIP is at ResumeCallBack+0x18/0x34 [agrmodem] > >>>>> [ 694.848557] EAX: f02c0800 EBX: 00000000 ECX: 01828000 EDX: f986a480 > >>>>> [ 694.848563] ESI: e650dc9c EDI: f02c0800 EBP: e650dc58 ESP: e650dc40 > >>>>> [ 694.848569] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > >>>>> [ 694.848577] Process wvdial (pid: 7339, ti=e650c000 task=e6e9e480 > >>>>> task.ti=e650c000) > >>>>> [ 694.848582] Stack: > >>>>> [ 694.848586] 00000000 00000003 0002a22c f02c0800 e650dc9c f02c0800 > >>>>> e650dc64 f8bdeca2 > >>>>> [ 694.848604] <0> f02c0800 e650dc70 f8bdcd84 efcfa200 e650dc94 > >>>>> f8bdce20 100f0000 0100cc9f > >>>>> [ 694.848622] <0> e650dc9c efcfa274 000f0000 e650dc9c f9947028 > >>>>> e650dca8 f8bdde41 ffffffff > >>>>> [ 694.848643] Call Trace: > >>>>> [ 694.848668] [<f8bdeca2>] ? hda_call_codec_resume+0x42/0x70 [snd_hda_codec] > >>>>> [ 694.848691] [<f8bdcd84>] ? snd_hda_power_up+0x34/0x60 [snd_hda_codec] > >>>>> [ 694.848711] [<f8bdce20>] ? codec_exec_verb+0x70/0xc0 [snd_hda_codec] > >>>>> [ 694.848741] [<f8bdde41>] ? snd_hda_codec_read+0x31/0x40 [snd_hda_codec] > >>>>> [ 694.848801] [<f989a999>] ? LnxTransferCodecVerbs+0x49/0x60 [agrmodem] > >>>>> [ 694.848890] [<f9884b1b>] ? VerbTransfer+0x2f/0x3c [agrmodem] > >>>>> [ 694.848976] [<f9884b73>] ? GetAzCodecID+0x4b/0x63 [agrmodem] > >>>>> [ 694.849063] [<f9885788>] ? CAzlIntelInit+0x4c/0x3c4 [agrmodem] > >>>>> [ 694.849085] [<c05718fc>] ? printk+0x18/0x1c > >>>>> [ 694.849173] [<f986e9f1>] ? LXHardwareStart+0x11de/0x13fb [agrmodem] > >>>>> [ 694.849199] [<c01b7ea5>] ? get_page_from_freelist+0x1c5/0x370 > >>>>> [ 694.849209] [<c0573cba>] ? _spin_lock_irqsave+0x2a/0x40 > >>>>> [ 694.849295] [<f986a1a8>] ? linux_modem_open+0x45/0x10e [agrmodem] > >>>>> [ 694.849316] [<c0150bbb>] ? mod_timer+0xcb/0x140 > >>>>> [ 694.849376] [<f97c42a8>] ? wrap_linux_modem_open+0x8/0x10 [agrmodem] > >>>>> [ 694.849435] [<f97c4308>] ? modemPortOpen+0x8/0x20 [agrmodem] > >>>>> [ 694.849447] [<f818cfe0>] ? serial8250_startup+0x210/0x380 [agrserial] > >>>>> [ 694.849457] [<c039ceb6>] ? uart_startup+0x46/0x140 > >>>>> [ 694.849465] [<c039d9f2>] ? uart_open+0x102/0x220 > >>>>> [ 694.849475] [<c0384af3>] ? __tty_open+0x1a3/0x460 > >>>>> [ 694.849483] [<c0384dcf>] ? tty_open+0x1f/0x40 > >>>>> [ 694.849493] [<c01eabfd>] ? chrdev_open+0xcd/0x190 > >>>>> [ 694.849502] [<c01e5bd9>] ? __dentry_open+0xb9/0x230 > >>>>> [ 694.849511] [<c01e5e35>] ? nameidata_to_filp+0x55/0x70 > >>>>> [ 694.849520] [<c01eab30>] ? chrdev_open+0x0/0x190 > >>>>> [ 694.849530] [<c01f3b8a>] ? do_filp_open+0x53a/0x890 > >>>>> [ 694.849540] [<c01e5970>] ? do_sys_open+0x50/0x150 > >>>>> [ 694.849548] [<c01e9425>] ? fput+0x15/0x20 > >>>>> [ 694.849556] [<c01e5847>] ? filp_close+0x47/0x70 > >>>>> [ 694.849564] [<c01e5ad9>] ? sys_open+0x29/0x40 > >>>>> [ 694.849573] [<c01033ac>] ? syscall_call+0x7/0xb > >>>>> [ 694.849578] Code: 89 d8 83 c4 2c 5b 5e 5f 5d c3 90 90 90 90 90 90 > >>>>> 90 90 90 55 89 e5 53 83 ec 14 8b 1d e8 e3 8e f9 c7 44 24 04 03 00 00 > >>>>> 00 89 1c 24 <ff> 53 60 c7 44 24 04 00 00 00 00 89 1c 24 ff 53 60 b8 00 > >>>>> 00 00 > >>>>> [ 694.849687] EIP: [<f986a498>] ResumeCallBack+0x18/0x34 [agrmodem] > >>>>> SS:ESP 0068:e650dc40 > >>>>> [ 694.849777] CR2: 0000000000000060 > >>>>> [ 694.849784] ---[ end trace e662cdc749dd82f6 ]--- > >>>>> > >>>>> > >>>>> As you can see i'm running ubuntu karmic, kernel 2.6.31-18-generic . > >>>>> Sometimes wvdial even freezes my computer. > >>>>> Any help is appreciated! > >>>>> Thanks > >>>>> > >>>> > >>> > >> > > > >
