Claudio You are missing a file with the contents below. Make a file with these contents, but replacing: DialUpNumber YourLoginName YourPassword This file should be named wvdial.conf, and can initially be in your home folder. Then after the $ sudo slmodemd -c ITALY --alsa modem:1 open a 2nd console and do: $ sudo wvdial -config=wvdial.conf MarvS [Dialer Defaults] Phone = DialUpNumber Username = YourLoginName Password = YourPassword Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 Modem Type = Analog Modem ISDN = 0 New PPPD = yes Modem = /dev/ttySL0 Carrier Check = no Baud = 460800 On Fri, Dec 4, 2009 at 9:40 PM, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > The modem activation command should be: > $ sudo slmodemd -c ITALY --alsa modem:1 > there should be reported creation of a port: > /dev/ttySL0 --> /dev/pts/N , N some number > > Only after such a success should one try; > $ sudo wvdial > > MarvS > > > > > On Fri, Dec 4, 2009 at 8:06 AM, Jacques Goldberg > <Jacques.Goldberg@xxxxxxx> wrote: >> Claudio, >> >> >> I believe that you have reached such a mess level that it has become >> impossible to know which is what. >> >> Here is what I would do in your place: >> >> Because you used two versions of file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz , >> >> 1-be root or sudo before any command >> >> 2-go into directory /usr/sbin >> 3-in that directory give command rm slmodemd* >> >> Make ABSOLUTELY SURE that you write slmodemd* so that there is NOTHING, NO >> SPACE, NOTHING ELSE, between slmodemd and the * . ABSOLUTELY SURE. >> >> Answer yes everytime you are prompted to erase a file with name starting >> with slmodemd and NO in any other case. >> >> 4-go into directory named SLMODEMD_gcc4.4_alsa1.0.21 >> >> 5-in that directory give command make uninstall >> >> 6-give the command cd >> >> 7-give the command find / -iname SLMODEMD* .Attention >> SLMODEMD in capital case. >> >> This will give a list of all the files in your computer with a name >> starting with SLMODEMD >> >> Erase all these files one at a time. To erase a file the command is rm ; >> to erase an empty directory the command is rmdir; to erase a directory which >> is not empty the command is rm -rf >> Always start with rm and then try rmdir and then rm -rf if the >> preceeding one is not accepted. >> >> 8-Now, in your usual directory, the one where you usually login, download >> the file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >> >> Do not try to use one which has been downloaded before unless you are >> ABSOLUTELY sure that this is the one which I >> >> placed this morning. >> >> 9-Give the command tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >> >> 10-Change directory with command cd SLMODEMD_gcc4.4_alsa1.0.21 >> >> 11-Do exactly, one time and one time only, what Marv has written to you to >> do or what is written in file README in the directory where you are starting >> from point 4 in INSTALLATION >> >> 12-After you have given the command slmodemd and it has succeeded, in >> an other window give the command >> >> wvdialconf /etc/wvdial.conf (no . in wvdialconf and a , in >> /etc/wvdial.conf >> >> wvdialconf will find your modem >> >> Edit /etc/wvdial.conf as explained in >> http://linmodems.technion.ac.il/wvdial.html . Remember that you need >> >> Carrier Check = no >> >> 13- When the file /etc/wvdial.conf has been edited and saved, in that window >> or any window except the one used for slmodemd, the command wvdial >> should start your modem. >> >> when everything works well wvdial does NOT exit but stays doing nothing. >> >> Use your browser (like Firefox) and try to surf. >> >> >> Please remember: every time you do something else than what we tell you to >> do, like installing several slmodemd , you take the risk to create the >> conditions for failure. >> >> >> Jacques >> >> >> >> Claudio Mantegazza wrote: >> >>> I downloaded again the new file. >>> i saw that there was updated 1 hour ago... >>> and in a new window (not the same about the >>> ======================= >>> mantegazza@mantegazza-laptop:~/Scaricati$ wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> mantegazza@mantegazza-laptop:~/Scaricati$ cd >>> /home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21 >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ ls >>> 1st_Read.txt COPYING Files.txt setup slmodemd >>> slmodemd.txt Testing.txt wvdial.conf >>> Changes CountryList.txt README Slmodem-ALSA.txt >>> slmodemd_Inst.txt slmodem.txt Unload.txt >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ sudo >>> ./setup >>> [sudo] password for mantegazza: >>> Installing slmodemd helper to /usr/sbin/slmodemd >>> >>> Writing log to slmodemd_Inst.txt >>> There is already installed a slmodemd of version: 2.9.11 >>> There is a file /usr/sbin/slmodemd >>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 >>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking >>> for version 2.9.11 >>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 >>> Version verified: 2.9.11 >>> Read the slmodemd_Inst.txt >>> >>> There is already installed a slmodemd of version: 2.9.11 >>> There is a file /usr/sbin/slmodemd >>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 >>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking >>> for version 2.9.11 >>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 >>> Version verified: 2.9.11 >>> Read the slmodemd_Inst.txt >>> >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>> wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>> ======================= >>> >>> but if in this windows i write the slmodem command: >>> >>> ====================== >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>> slmodemd --alsa -c YOUR_COUNTRY modem:1 error: mixer setup: attach hw:1 >>> error: No such file or directory >>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>> error: alsa setup: cannot open playback device 'modem:1': Invalid argument >>> error: cannot setup device `modem:1' >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>> ====================== >>> >>> I receive this error.... >>> >>> and if i return in the other folder and i write... >>> >>> ================ >>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ cd >>> /home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem >>> mantegazza@mantegazza-laptop:~/Scaricati/slmodem-2.9.11-20090222/modem$ >>> sudo su >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> --> Cannot open /dev/modem: No such file or directory >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> slmodemd -c ITALY modem:1 >>> error: mdm setup: cannot stat `modem:1': No such file or directory >>> error: cannot setup device `modem:1' >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> make SUPPORT_ALSA=1 >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> slmodemd -c ITALY modem:1 >>> error: mdm setup: cannot stat `modem:1': No such file or directory >>> error: cannot setup device `modem:1' >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> cp slmodemd /usr/sbin >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> slmodemd -c ITALY modem:1 >>> error: mdm setup: cannot stat `modem:1': No such file or directory >>> error: cannot setup device `modem:1' >>> >>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>> ================ >>> >>> Have you got other ideas? >>> >>> Claudio. >>> >>> >>> >>> ---------------------------------------- >>> >>>> >>>> Date: Fri, 4 Dec 2009 11:17:52 +0200 >>>> From: Jacques.Goldberg@xxxxxxx >>>> To: ermante@xxxxxxxxxxx >>>> CC: olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx; >>>> marvin.stodolsky@xxxxxxxxx >>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel >>>> 2.6.31-15-generic >>>> >>>> Claudio, >>>> >>>> Did you download the file again today within about one hour back from >>>> now? >>>> >>>> I ask because this would then be after I installed the file with alsa >>>> stuff included. >>>> >>>> >>>> Now, reading your report, I have a question about: >>>> >>>> >>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>> # slmodemd -c ITALY modem:1 >>>> >>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>> wvdial >>>> >>>> Did you give the wvdial command in the same window where you had given >>>> before the command slmodemd? >>>> >>>> If yes, then to give wvdial you must have stopped slmodemd with CTRL-C >>>> which would explain why wvdial did not find the file /dev/ttySL0 : this >>>> file exists ONLY while slmodemd is running. >>>> >>>> If my guess is correct, then remember to ALWAYS start wvdial IN AN OTHER >>>> FREE WINDOW, not the one where slmodemd runs. >>>> >>>> >>>> Jacques >>>> >>>> >>>> Claudio Mantegazza wrote: >>>> >>>> >>>>> >>>>> I made again the command you told me and in this time i didn't receive >>>>> any errors.... >>>>> Look at the command i wrote: >>>>> >>>>> ========================= >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> lsdp_dummy.c Makefile modem_comp.c modem_defs.h modem_main.o modem_test >>>>> sysdep_common.c >>>>> dp_dummy.o Makefile.20080401 modem_comp.o modem_dp.h modem.o >>>>> modem_test.c sysdep_common.o >>>>> dp_sinus.c modem_at.c modem_datafile.c modem_ec.c modem_pack.c >>>>> modem_test.o >>>>> dp_sinus.o modem_at.o modem_datafile.o modem_ec.o modem_pack.o >>>>> modem_timer.c >>>>> dsplibs.o modem.c modem_debug.c modem.h modem_param.c modem_timer.h >>>>> homolog_data.c modem_cmdline.c modem_debug.h modem_homolog.h >>>>> modem_param.h modem_timer.o >>>>> homolog_data.o modem_cmdline.o modem_debug.o modem_main.c modem_param.o >>>>> slmodemd >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> modprobe snd-intel8x0m >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> aplay -l >>>>> **** Lista di PLAYBACK dispositivi hardware **** >>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 0: Intel ICH >>>>> [Intel 82801DB-ICH4] >>>>> Sottoperiferiche: 1/1 >>>>> Sottoperiferica #0: subdevice #0 >>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 4: Intel ICH - >>>>> IEC958 [Intel 82801DB-ICH4 - IEC958] >>>>> Sottoperiferiche: 1/1 >>>>> Sottoperiferica #0: subdevice #0 >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> # cp slmodemd /usr/sbin >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> # slmodemd -c ITALY modem:1 >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> >>>>> ========================= >>>>> >>>>> But i cannot be able to connect.... >>>>> >>>>> Claudio. >>>>> >>>>> >>>>> >>>>> ---------------------------------------- >>>>> >>>>> >>>>>> >>>>>> Date: Thu, 3 Dec 2009 14:14:59 -0600 >>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>> kernel 2.6.31-15-generic >>>>>> From: olivares14031@xxxxxxxxx >>>>>> To: ermante@xxxxxxxxxxx >>>>>> CC: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx >>>>>> >>>>>> Claudio, >>>>>> >>>>>> What happens when you try >>>>>> $ sudo slmodemd --alsa -c ITALY modem:1 >>>>>> >>>>>> and try from the recently compiled slmodemd in >>>>>> slmodem-2.9.11-20090222/modem folder? >>>>>> >>>>>> Regards, >>>>>> >>>>>> >>>>>> Antonio >>>>>> >>>>>> On Thu, Dec 3, 2009 at 8:01 AM, Claudio Mantegazza wrote: >>>>>> >>>>>> >>>>>>> >>>>>>> Antonio, >>>>>>> i'm very sorry but it didn't run... >>>>>>> >>>>>>> i made all that you told me but at the last command: >>>>>>> >>>>>>> ========= >>>>>>> # make SUPPORT_ALSA=1 >>>>>>> rebuild profile... >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_main.o -c modem_main.c >>>>>>> modem_main.c: In function ‘setup_stream’: >>>>>>> modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is >>>>>>> deprecated (declared at /usr/include/alsa/pcm.h:1116) >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_cmdline.o -c modem_cmdline.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o >>>>>>> -c modem.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_datafile.o -c modem_datafile.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_at.o -c modem_at.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_timer.o -c modem_timer.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_pack.o -c modem_pack.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_ec.o -c modem_ec.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_comp.o -c modem_comp.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_param.o -c modem_param.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_debug.o -c modem_debug.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> homolog_data.o -c homolog_data.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> dp_sinus.o -c dp_sinus.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> dp_dummy.o -c dp_dummy.c >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> sysdep_common.o -c sysdep_common.c >>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o >>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o >>>>>>> modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o >>>>>>> /usr/lib/libasound.so >>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>> modem_test.o -c modem_test.c >>>>>>> modem_test.c: In function ‘modem_test_start’: >>>>>>> modem_test.c:110: warning: ignoring return value of ‘write’, declared >>>>>>> with attribute warn_unused_result >>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o >>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o >>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o >>>>>>> dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so >>>>>>> >>>>>>> >>>>>>> ========= >>>>>>> >>>>>>> >>>>>>> # cp slmodemd /usr/sbin >>>>>>> >>>>>>> ========= >>>>>>> # slmodemd -c ITALY modem:1 >>>>>>> error: mdm setup: cannot stat `modem:1': No such file or directory >>>>>>> error: cannot setup device `modem:1' >>>>>>> ========= >>>>>>> # wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> ========= >>>>>>> >>>>>>> it seems not like it... >>>>>>> >>>>>>> And now? >>>>>>> what can i do? >>>>>>> >>>>>>> Claudio. >>>>>>> >>>>>>> >>>>>>> ............................................................................................................... >>>>>>> >>>>>>> ---------------------------------------- >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Date: Thu, 3 Dec 2009 07:11:57 -0600 >>>>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>>>> kernel 2.6.31-15-generic >>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; jacques.goldberg@xxxxxxx >>>>>>>> >>>>>>>> Claudio, >>>>>>>> >>>>>>>> If you want to build SLMODEMD on your own for your system, Please do >>>>>>>> the following: >>>>>>>> >>>>>>>> Download: >>>>>>>> >>>>>>>> >>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz >>>>>>>> Copy it to your linux partition/working directory, untar it with >>>>>>>> $ tar -zxvf slmodem-2.9.11-20090222.tar.gz >>>>>>>> $ cd slmodem-2.9.11-20090222 >>>>>>>> $ cd modem >>>>>>>> $ make SUPPORT_ALSA=1 >>>>>>>> >>>>>>>> as show in README >>>>>>>> >>>>>>>> ==================== >>>>>>>> 3. Build application 'slmodemd' with ALSA support. For this in >>>>>>>> slmodem-2.9.x dir: >>>>>>>> >>>>>>>> $ cd modem >>>>>>>> $ make SUPPORT_ALSA=1 >>>>>>>> ==================== >>>>>>>> >>>>>>>> After this is successfull, then there will be a slmodemd file in that >>>>>>>> directory, copy it over to /usr/sbin >>>>>>>> >>>>>>>> and try the >>>>>>>> $ sudo slmodemd -c ITALY modem:1 >>>>>>>> >>>>>>>> command again and hopefully it works this time around. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> PS. >>>>>>>> I hope that the "NO CARRIER" error shows up like it did for me with >>>>>>>> 2.6.31.X kernels but slamr module. >>>>>>>> >>>>>>>> On 12/3/09, Claudio Mantegazza wrote: >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> I untar the new one you sent me. >>>>>>>>> i exec the command: >>>>>>>>> >>>>>>>>> =============== >>>>>>>>> # ./slmodemd --alsa -c ITALY modem:1 >>>>>>>>> ALSA support is not compiled in (see README for howto). >>>>>>>>> =============== >>>>>>>>> >>>>>>>>> Now. how can i compile the ALSA support? >>>>>>>>> >>>>>>>>> P.s. i just installed the package libasound2-dev >>>>>>>>> >>>>>>>>> Thanks... >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ---------------------------------------- >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Date: Wed, 2 Dec 2009 14:18:11 -0500 >>>>>>>>>> Subject: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>>>>>> kernel >>>>>>>>>> 2.6.31-15-generic >>>>>>>>>> From: marvin.stodolsky@xxxxxxxxx >>>>>>>>>> To: ermante@xxxxxxxxxxx; Jacques.Goldberg@xxxxxxx; >>>>>>>>>> olivares14031@xxxxxxxxx >>>>>>>>>> >>>>>>>>>> Claudio, >>>>>>>>>> >>>>>>>>>> Used the attached SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >>>>>>>>>> >>>>>>>>>> Jacques >>>>>>>>>> for the smartlink/ folder >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> On Wed, Dec 2, 2009 at 8:52 AM, Claudio Mantegazza wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> because i didn't find which u told me... and this one is the last >>>>>>>>>>> one... >>>>>>>>>>> >>>>>>>>>>> ======================================================= >>>>>>>>>>> Not Found >>>>>>>>>>> The requested URL /packages/smartlink/SLMODEMD.gcc4.4.tar.gz was >>>>>>>>>>> not >>>>>>>>>>> found on this server. >>>>>>>>>>> >>>>>>>>>>> Apache/2.0.52 (Red Hat) Server at linmodems.technion.ac.il Port 80 >>>>>>>>>>> ======================================================= >>>>>>>>>>> >>>>>>>>>>> Maybe i don't understand something? >>>>>>>>>>> Can you tell me better where i can download the right file, >>>>>>>>>>> please? >>>>>>>>>>> give me the correct link.... >>>>>>>>>>> >>>>>>>>>>> Thanks. >>>>>>>>>>> Claudio. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ---------------------------------------- >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Date: Wed, 2 Dec 2009 07:15:13 -0600 >>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic >>>>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>>>>>> CC: discuss@xxxxxxxxxxxxx >>>>>>>>>>>> >>>>>>>>>>>> Claudio, >>>>>>>>>>>> >>>>>>>>>>>> I downloaded >>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz >>>>>>>>>>>> but the install doesn't go: have a look... >>>>>>>>>>>> ================================================= >>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 >>>>>>>>>>>> [sudo] password for mant: >>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory >>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1': Invalid >>>>>>>>>>>> argument >>>>>>>>>>>> error: cannot setup device `modem:1' >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> why did you get the SLMODEMD_gcc4.4_alsa1.0.18.tar.gz? >>>>>>>>>>>> If your alsa verion is 1.0.20? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>> modems. >>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>> folders. >>>>>>>>>>>> >>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>> ----------------------- >>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>> playback 1 >>>>>>>>>>>> >>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>> ------------------------ >>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>> modems. >>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>> folders. >>>>>>>>>>>> >>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>> ----------------------- >>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>> playback 1 >>>>>>>>>>>> >>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>> ------------------------ >>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>> modems. >>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>> folders. >>>>>>>>>>>> >>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>> The modem cards detected by "aplay -l" are: >>>>>>>>>>>> scheda 1: Modem [Intel 82801DB-ICH4 Modem], dispositivo 0: Intel >>>>>>>>>>>> ICH - >>>>>>>>>>>> Modem [Intel 82801DB-ICH4 Modem - Modem] >>>>>>>>>>>> >>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>> ----------------------- >>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>> capture 1 >>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>> playback 1 >>>>>>>>>>>> 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : >>>>>>>>>>>> playback >>>>>>>>>>>> 1 : capture 1 >>>>>>>>>>>> >>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>> ------------------------ >>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem >>>>>>>>>>>> Intel 82801DB-ICH4 Modem at irq 5 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> If you have downloaded the recommended SLMODEMD: the package >>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>> >>>>>>>>>>>> Does the same thing happen? >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Antonio >>>>>>>>>>>> >>>>>>>>>>>> On 12/2/09, Claudio Mantegazza wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> I downloaded >>>>>>>>>>>>> >>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz >>>>>>>>>>>>> but the install doesn't go: have a look... >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 >>>>>>>>>>>>> [sudo] password for mant: >>>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory >>>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1': >>>>>>>>>>>>> Invalid >>>>>>>>>>>>> argument >>>>>>>>>>>>> error: cannot setup device `modem:1' >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> mant@mant-laptop:~/Scaricati$ wvdial >>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> It doen't work! >>>>>>>>>>>>> the drivers doesn't load fine! >>>>>>>>>>>>> .... >>>>>>>>>>>>> Claudio. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Date: Tue, 1 Dec 2009 07:10:24 -0600 >>>>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic >>>>>>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; stephenpinker79@xxxxxxxxx; >>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>> >>>>>>>>>>>>>> Claudio, >>>>>>>>>>>>>> >>>>>>>>>>>>>> scanModem reports that your modem is supported via >>>>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>>>> : >>>>>>>>>>>>>> >>>>>>>>>>>>>> For candidate modem in: 00:1f.6 >>>>>>>>>>>>>> 0703 Modem: Intel Corporation 82801DB/DBL/DBM >>>>>>>>>>>>>> Primary device ID: 8086:24c6 >>>>>>>>>>>>>> Subsystem PCI_id 1631:d005 >>>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: SIL22, a Smartlink >>>>>>>>>>>>>> type >>>>>>>>>>>>>> from Archives: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> This is a NEW softmodem case! Please send the output >>>>>>>>>>>>>> ModemData.txt >>>>>>>>>>>>>> to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others! >>>>>>>>>>>>>> If further assistance is not needed, please use email Subject: >>>>>>>>>>>>>> New Case Only >>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>> Support type needed or chipset: slmodemd >>>>>>>>>>>>>> >>>>>>>>>>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver: >>>>>>>>>>>>>> snd-intel8x0m >>>>>>>>>>>>>> provides Low Level support enabling contact with the modem >>>>>>>>>>>>>> hardware. >>>>>>>>>>>>>> For all BUT Conexant chip soft modems (using hsfmodem software) >>>>>>>>>>>>>> complementary High Level support is through a Smartlink >>>>>>>>>>>>>> utility: >>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>>> >>>>>>>>>>>>>> Download from >>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>> the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. >>>>>>>>>>>>>> Unpack >>>>>>>>>>>>>> under Linux with: >>>>>>>>>>>>>> $ tar zxf SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>>>> and read instructions therein. But briefly, the modem is setup >>>>>>>>>>>>>> with >>>>>>>>>>>>>> command: >>>>>>>>>>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 >>>>>>>>>>>>>> reporting dynamic creation of ports: >>>>>>>>>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>>>>>>>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for >>>>>>>>>>>>>> follow >>>>>>>>>>>>>> through guidance. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> If you have downloaded the package SLMODEMD.gcc4.4.tar.gz and >>>>>>>>>>>>>> tried >>>>>>>>>>>>>> the above instructions and are not getting anywhere/(modem does >>>>>>>>>>>>>> not >>>>>>>>>>>>>> respond) it could be because of >>>>>>>>>>>>>> >>>>>>>>>>>>>> For candidate card in slot 00:1f.6, firmware information and >>>>>>>>>>>>>> bootup >>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>>>>>>> 00:1f.6 8086:24c6 1631:d005 Modem: Intel Corporation >>>>>>>>>>>>>> 82801DB/DBL/DBM >>>>>>>>>>>>>> >>>>>>>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>>>>>>> 5: 137 XT-PIC-XT yenta, Intel 82801DB-ICH4, Intel >>>>>>>>>>>>>> 82801DB-ICH4 Modem >>>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- >>>>>>>>>>>>>> [ 0.071472] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff] >>>>>>>>>>>>>> [ 0.071480] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f] >>>>>>>>>>>>>> [ 0.071521] pci 0000:00:1f.6: PME# supported from D0 D3hot >>>>>>>>>>>>>> D3cold >>>>>>>>>>>>>> [ 0.071525] pci 0000:00:1f.6: PME# disabled >>>>>>>>>>>>>> [ 0.956536] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI >>>>>>>>>>>>>> 5 >>>>>>>>>>>>>> (level, low) -> IRQ 5 >>>>>>>>>>>>>> [ 0.956547] serial 0000:00:1f.6: PCI INT B disabled >>>>>>>>>>>>>> [ 3186.856643] Intel ICH Modem 0000:00:1f.6: PCI INT B -> >>>>>>>>>>>>>> Link[LNKB] >>>>>>>>>>>>>> -> GSI 5 (level, low) -> IRQ 5 >>>>>>>>>>>>>> [ 3186.856669] Intel ICH Modem 0000:00:1f.6: setting latency >>>>>>>>>>>>>> timer to >>>>>>>>>>>>>> 64 >>>>>>>>>>>>>> >>>>>>>>>>>>>> The PCI slot 00:1f.6 of the modem card may be disabled early in >>>>>>>>>>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>>>>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about >>>>>>>>>>>>>> possible >>>>>>>>>>>>>> fixes. >>>>>>>>>>>>>> Send dmesg.txt along with ModemData.txt to >>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>> if help is needed. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Let us know if the package SLMODEMD.gcc4.4.tar.gz works or not, >>>>>>>>>>>>>> and if >>>>>>>>>>>>>> the driver loads fine but does not respond, follow the above >>>>>>>>>>>>>> instructions to see if it can work or not. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>>>>>>>>>> http://www.messenger.it/home_comunica.aspx >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>>>>>>>> http://www.messenger.it/home_comunica.aspx >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> _________________________________________________________________ >>>>>>>>> 25 Gigabyte per le tue foto online >>>>>>>>> http://www.windowslive.it/foto.aspx >>>>>>>>> >>>>>>>>> >>>>>>> >>>>>>> _________________________________________________________________ >>>>>>> 25 Gigabyte per le tue foto online >>>>>>> http://www.windowslive.it/foto.aspx >>>>>>> >>>>>>> >>>>> >>>>> _________________________________________________________________ >>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>> http://www.messenger.it/home_comunica.aspx >>>>> >>> >>> >>> _________________________________________________________________ >>> I tuoi amici sempre a portata di clic, sul nuovo Web Messenger >>> http://www.windowslive.it/foto.aspx >> >> >
