Don't run "make", as the compile has already been done. Just do: $ sudo ./setup MarvS On Wed, Dec 9, 2009 at 5:33 AM, Claudio Mantegazza <ermante@xxxxxxxxxxx> wrote: > > Marvin,Jacques, wait a minute.... > > I did only a part which jacques told me... > i arrived to do all until jacques told me to continue to do what wrote in the README file at the installation but when i write the command in it i receice an error... Look at... > > ================= > root@mantegazza-laptop:~# find / -iname SLMODEMD* > root@mantegazza-laptop:~# cd /home/mantegazza/Scaricati > root@mantegazza-laptop:/home/mantegazza/Scaricati# tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz > root@mantegazza-laptop:/home/mantegazza/Scaricati# cd SLMODEMD_gcc4.4_alsa1.0.21 > root@mantegazza-laptop:/home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21# exit > exit > mantegazza@mantegazza-laptop:~$ cd /home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21 > mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ make > make: *** Nessun obiettivo specificato e nessun makefile trovato. Arresto. > mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ sudo su > [sudo] password for mantegazza: > root@mantegazza-laptop:/home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21# make > make: *** Nessun obiettivo specificato e nessun makefile trovato. Arresto. > root@mantegazza-laptop:/home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21# make install > make: *** Nessuna regola per creare l'obiettivo «install». Arresto. > root@mantegazza-laptop:/home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21# > =================== > > So what i have to do before continue? > > Claudio. > > > > ---------------------------------------- >> Date: Sat, 5 Dec 2009 16:37:08 -0500 >> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic >> From: marvin.stodolsky@xxxxxxxxx >> To: discuss@xxxxxxxxxxxxx >> CC: ermante@xxxxxxxxxxx >> >> Claudio >> >> You are missing a file with the contents below. >> Make a file with these contents, but replacing: >> DialUpNumber >> YourLoginName >> YourPassword >> This file should be named wvdial.conf, and can initially be in your home folder. >> Then after the >> $ sudo slmodemd -c ITALY --alsa modem:1 >> open a 2nd console and do: >> $ sudo wvdial -config=wvdial.conf >> >> MarvS >> >> [Dialer Defaults] >> Phone = DialUpNumber >> Username = YourLoginName >> Password = YourPassword >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >> Modem Type = Analog Modem >> ISDN = 0 >> New PPPD = yes >> Modem = /dev/ttySL0 >> Carrier Check = no >> Baud = 460800 >> >> On Fri, Dec 4, 2009 at 9:40 PM, Marvin Stodolsky >> wrote: >>> The modem activation command should be: >>> $ sudo slmodemd -c ITALY --alsa modem:1 >>> there should be reported creation of a port: >>> /dev/ttySL0 --> /dev/pts/N , N some number >>> >>> Only after such a success should one try; >>> $ sudo wvdial >>> >>> MarvS >>> >>> >>> >>> >>> On Fri, Dec 4, 2009 at 8:06 AM, Jacques Goldberg >>> wrote: >>>> Claudio, >>>> >>>> >>>> I believe that you have reached such a mess level that it has become >>>> impossible to know which is what. >>>> >>>> Here is what I would do in your place: >>>> >>>> Because you used two versions of file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz , >>>> >>>> 1-be root or sudo before any command >>>> >>>> 2-go into directory /usr/sbin >>>> 3-in that directory give command rm slmodemd* >>>> >>>> Make ABSOLUTELY SURE that you write slmodemd* so that there is NOTHING, NO >>>> SPACE, NOTHING ELSE, between slmodemd and the * . ABSOLUTELY SURE. >>>> >>>> Answer yes everytime you are prompted to erase a file with name starting >>>> with slmodemd and NO in any other case. >>>> >>>> 4-go into directory named SLMODEMD_gcc4.4_alsa1.0.21 >>>> >>>> 5-in that directory give command make uninstall >>>> >>>> 6-give the command cd >>>> >>>> 7-give the command find / -iname SLMODEMD* .Attention >>>> SLMODEMD in capital case. >>>> >>>> This will give a list of all the files in your computer with a name >>>> starting with SLMODEMD >>>> >>>> Erase all these files one at a time. To erase a file the command is rm ; >>>> to erase an empty directory the command is rmdir; to erase a directory which >>>> is not empty the command is rm -rf >>>> Always start with rm and then try rmdir and then rm -rf if the >>>> preceeding one is not accepted. >>>> >>>> 8-Now, in your usual directory, the one where you usually login, download >>>> the file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >>>> >>>> Do not try to use one which has been downloaded before unless you are >>>> ABSOLUTELY sure that this is the one which I >>>> >>>> placed this morning. >>>> >>>> 9-Give the command tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >>>> >>>> 10-Change directory with command cd SLMODEMD_gcc4.4_alsa1.0.21 >>>> >>>> 11-Do exactly, one time and one time only, what Marv has written to you to >>>> do or what is written in file README in the directory where you are starting >>>> from point 4 in INSTALLATION >>>> >>>> 12-After you have given the command slmodemd and it has succeeded, in >>>> an other window give the command >>>> >>>> wvdialconf /etc/wvdial.conf (no . in wvdialconf and a , in >>>> /etc/wvdial.conf >>>> >>>> wvdialconf will find your modem >>>> >>>> Edit /etc/wvdial.conf as explained in >>>> http://linmodems.technion.ac.il/wvdial.html . Remember that you need >>>> >>>> Carrier Check = no >>>> >>>> 13- When the file /etc/wvdial.conf has been edited and saved, in that window >>>> or any window except the one used for slmodemd, the command wvdial >>>> should start your modem. >>>> >>>> when everything works well wvdial does NOT exit but stays doing nothing. >>>> >>>> Use your browser (like Firefox) and try to surf. >>>> >>>> >>>> Please remember: every time you do something else than what we tell you to >>>> do, like installing several slmodemd , you take the risk to create the >>>> conditions for failure. >>>> >>>> >>>> Jacques >>>> >>>> >>>> >>>> Claudio Mantegazza wrote: >>>> >>>>> I downloaded again the new file. >>>>> i saw that there was updated 1 hour ago... >>>>> and in a new window (not the same about the >>>>> ======================= >>>>> mantegazza@mantegazza-laptop:~/Scaricati$ wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> mantegazza@mantegazza-laptop:~/Scaricati$ cd >>>>> /home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21 >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ ls >>>>> 1st_Read.txt COPYING Files.txt setup slmodemd >>>>> slmodemd.txt Testing.txt wvdial.conf >>>>> Changes CountryList.txt README Slmodem-ALSA.txt >>>>> slmodemd_Inst.txt slmodem.txt Unload.txt >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ sudo >>>>> ./setup >>>>> [sudo] password for mantegazza: >>>>> Installing slmodemd helper to /usr/sbin/slmodemd >>>>> >>>>> Writing log to slmodemd_Inst.txt >>>>> There is already installed a slmodemd of version: 2.9.11 >>>>> There is a file /usr/sbin/slmodemd >>>>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 >>>>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking >>>>> for version 2.9.11 >>>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 >>>>> Version verified: 2.9.11 >>>>> Read the slmodemd_Inst.txt >>>>> >>>>> There is already installed a slmodemd of version: 2.9.11 >>>>> There is a file /usr/sbin/slmodemd >>>>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 >>>>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking >>>>> for version 2.9.11 >>>>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 >>>>> Version verified: 2.9.11 >>>>> Read the slmodemd_Inst.txt >>>>> >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>>>> wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>>>> ======================= >>>>> >>>>> but if in this windows i write the slmodem command: >>>>> >>>>> ====================== >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>>>> slmodemd --alsa -c YOUR_COUNTRY modem:1 error: mixer setup: attach hw:1 >>>>> error: No such file or directory >>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>>>> error: alsa setup: cannot open playback device 'modem:1': Invalid argument >>>>> error: cannot setup device `modem:1' >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ >>>>> ====================== >>>>> >>>>> I receive this error.... >>>>> >>>>> and if i return in the other folder and i write... >>>>> >>>>> ================ >>>>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ cd >>>>> /home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem >>>>> mantegazza@mantegazza-laptop:~/Scaricati/slmodem-2.9.11-20090222/modem$ >>>>> sudo su >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> --> Cannot open /dev/modem: No such file or directory >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> slmodemd -c ITALY modem:1 >>>>> error: mdm setup: cannot stat `modem:1': No such file or directory >>>>> error: cannot setup device `modem:1' >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> make SUPPORT_ALSA=1 >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> slmodemd -c ITALY modem:1 >>>>> error: mdm setup: cannot stat `modem:1': No such file or directory >>>>> error: cannot setup device `modem:1' >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> cp slmodemd /usr/sbin >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> slmodemd -c ITALY modem:1 >>>>> error: mdm setup: cannot stat `modem:1': No such file or directory >>>>> error: cannot setup device `modem:1' >>>>> >>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>> ================ >>>>> >>>>> Have you got other ideas? >>>>> >>>>> Claudio. >>>>> >>>>> >>>>> >>>>> ---------------------------------------- >>>>> >>>>>> >>>>>> Date: Fri, 4 Dec 2009 11:17:52 +0200 >>>>>> From: Jacques.Goldberg@xxxxxxx >>>>>> To: ermante@xxxxxxxxxxx >>>>>> CC: olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx; >>>>>> marvin.stodolsky@xxxxxxxxx >>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel >>>>>> 2.6.31-15-generic >>>>>> >>>>>> Claudio, >>>>>> >>>>>> Did you download the file again today within about one hour back from >>>>>> now? >>>>>> >>>>>> I ask because this would then be after I installed the file with alsa >>>>>> stuff included. >>>>>> >>>>>> >>>>>> Now, reading your report, I have a question about: >>>>>> >>>>>> >>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>> # slmodemd -c ITALY modem:1 >>>>>> >>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>> wvdial >>>>>> >>>>>> Did you give the wvdial command in the same window where you had given >>>>>> before the command slmodemd? >>>>>> >>>>>> If yes, then to give wvdial you must have stopped slmodemd with CTRL-C >>>>>> which would explain why wvdial did not find the file /dev/ttySL0 : this >>>>>> file exists ONLY while slmodemd is running. >>>>>> >>>>>> If my guess is correct, then remember to ALWAYS start wvdial IN AN OTHER >>>>>> FREE WINDOW, not the one where slmodemd runs. >>>>>> >>>>>> >>>>>> Jacques >>>>>> >>>>>> >>>>>> Claudio Mantegazza wrote: >>>>>> >>>>>> >>>>>>> >>>>>>> I made again the command you told me and in this time i didn't receive >>>>>>> any errors.... >>>>>>> Look at the command i wrote: >>>>>>> >>>>>>> ========================= >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> lsdp_dummy.c Makefile modem_comp.c modem_defs.h modem_main.o modem_test >>>>>>> sysdep_common.c >>>>>>> dp_dummy.o Makefile.20080401 modem_comp.o modem_dp.h modem.o >>>>>>> modem_test.c sysdep_common.o >>>>>>> dp_sinus.c modem_at.c modem_datafile.c modem_ec.c modem_pack.c >>>>>>> modem_test.o >>>>>>> dp_sinus.o modem_at.o modem_datafile.o modem_ec.o modem_pack.o >>>>>>> modem_timer.c >>>>>>> dsplibs.o modem.c modem_debug.c modem.h modem_param.c modem_timer.h >>>>>>> homolog_data.c modem_cmdline.c modem_debug.h modem_homolog.h >>>>>>> modem_param.h modem_timer.o >>>>>>> homolog_data.o modem_cmdline.o modem_debug.o modem_main.c modem_param.o >>>>>>> slmodemd >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> modprobe snd-intel8x0m >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> aplay -l >>>>>>> **** Lista di PLAYBACK dispositivi hardware **** >>>>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 0: Intel ICH >>>>>>> [Intel 82801DB-ICH4] >>>>>>> Sottoperiferiche: 1/1 >>>>>>> Sottoperiferica #0: subdevice #0 >>>>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 4: Intel ICH - >>>>>>> IEC958 [Intel 82801DB-ICH4 - IEC958] >>>>>>> Sottoperiferiche: 1/1 >>>>>>> Sottoperiferica #0: subdevice #0 >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> # cp slmodemd /usr/sbin >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> # slmodemd -c ITALY modem:1 >>>>>>> >>>>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# >>>>>>> wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>> >>>>>>> ========================= >>>>>>> >>>>>>> But i cannot be able to connect.... >>>>>>> >>>>>>> Claudio. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ---------------------------------------- >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Date: Thu, 3 Dec 2009 14:14:59 -0600 >>>>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>>>> kernel 2.6.31-15-generic >>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>> CC: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx >>>>>>>> >>>>>>>> Claudio, >>>>>>>> >>>>>>>> What happens when you try >>>>>>>> $ sudo slmodemd --alsa -c ITALY modem:1 >>>>>>>> >>>>>>>> and try from the recently compiled slmodemd in >>>>>>>> slmodem-2.9.11-20090222/modem folder? >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> On Thu, Dec 3, 2009 at 8:01 AM, Claudio Mantegazza wrote: >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> Antonio, >>>>>>>>> i'm very sorry but it didn't run... >>>>>>>>> >>>>>>>>> i made all that you told me but at the last command: >>>>>>>>> >>>>>>>>> ========= >>>>>>>>> # make SUPPORT_ALSA=1 >>>>>>>>> rebuild profile... >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_main.o -c modem_main.c >>>>>>>>> modem_main.c: In function ‘setup_stream’: >>>>>>>>> modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is >>>>>>>>> deprecated (declared at /usr/include/alsa/pcm.h:1116) >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_cmdline.o -c modem_cmdline.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o >>>>>>>>> -c modem.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_datafile.o -c modem_datafile.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_at.o -c modem_at.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_timer.o -c modem_timer.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_pack.o -c modem_pack.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_ec.o -c modem_ec.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_comp.o -c modem_comp.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_param.o -c modem_param.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_debug.o -c modem_debug.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> homolog_data.o -c homolog_data.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> dp_sinus.o -c dp_sinus.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> dp_dummy.o -c dp_dummy.c >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> sysdep_common.o -c sysdep_common.c >>>>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o >>>>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o >>>>>>>>> modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o >>>>>>>>> /usr/lib/libasound.so >>>>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o >>>>>>>>> modem_test.o -c modem_test.c >>>>>>>>> modem_test.c: In function ‘modem_test_start’: >>>>>>>>> modem_test.c:110: warning: ignoring return value of ‘write’, declared >>>>>>>>> with attribute warn_unused_result >>>>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o >>>>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o >>>>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o >>>>>>>>> dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so >>>>>>>>> >>>>>>>>> >>>>>>>>> ========= >>>>>>>>> >>>>>>>>> >>>>>>>>> # cp slmodemd /usr/sbin >>>>>>>>> >>>>>>>>> ========= >>>>>>>>> # slmodemd -c ITALY modem:1 >>>>>>>>> error: mdm setup: cannot stat `modem:1': No such file or directory >>>>>>>>> error: cannot setup device `modem:1' >>>>>>>>> ========= >>>>>>>>> # wvdial >>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>> ========= >>>>>>>>> >>>>>>>>> it seems not like it... >>>>>>>>> >>>>>>>>> And now? >>>>>>>>> what can i do? >>>>>>>>> >>>>>>>>> Claudio. >>>>>>>>> >>>>>>>>> >>>>>>>>> ............................................................................................................... >>>>>>>>> >>>>>>>>> ---------------------------------------- >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Date: Thu, 3 Dec 2009 07:11:57 -0600 >>>>>>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>>>>>> kernel 2.6.31-15-generic >>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; jacques.goldberg@xxxxxxx >>>>>>>>>> >>>>>>>>>> Claudio, >>>>>>>>>> >>>>>>>>>> If you want to build SLMODEMD on your own for your system, Please do >>>>>>>>>> the following: >>>>>>>>>> >>>>>>>>>> Download: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz >>>>>>>>>> Copy it to your linux partition/working directory, untar it with >>>>>>>>>> $ tar -zxvf slmodem-2.9.11-20090222.tar.gz >>>>>>>>>> $ cd slmodem-2.9.11-20090222 >>>>>>>>>> $ cd modem >>>>>>>>>> $ make SUPPORT_ALSA=1 >>>>>>>>>> >>>>>>>>>> as show in README >>>>>>>>>> >>>>>>>>>> ==================== >>>>>>>>>> 3. Build application 'slmodemd' with ALSA support. For this in >>>>>>>>>> slmodem-2.9.x dir: >>>>>>>>>> >>>>>>>>>> $ cd modem >>>>>>>>>> $ make SUPPORT_ALSA=1 >>>>>>>>>> ==================== >>>>>>>>>> >>>>>>>>>> After this is successfull, then there will be a slmodemd file in that >>>>>>>>>> directory, copy it over to /usr/sbin >>>>>>>>>> >>>>>>>>>> and try the >>>>>>>>>> $ sudo slmodemd -c ITALY modem:1 >>>>>>>>>> >>>>>>>>>> command again and hopefully it works this time around. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Antonio >>>>>>>>>> >>>>>>>>>> PS. >>>>>>>>>> I hope that the "NO CARRIER" error shows up like it did for me with >>>>>>>>>> 2.6.31.X kernels but slamr module. >>>>>>>>>> >>>>>>>>>> On 12/3/09, Claudio Mantegazza wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I untar the new one you sent me. >>>>>>>>>>> i exec the command: >>>>>>>>>>> >>>>>>>>>>> =============== >>>>>>>>>>> # ./slmodemd --alsa -c ITALY modem:1 >>>>>>>>>>> ALSA support is not compiled in (see README for howto). >>>>>>>>>>> =============== >>>>>>>>>>> >>>>>>>>>>> Now. how can i compile the ALSA support? >>>>>>>>>>> >>>>>>>>>>> P.s. i just installed the package libasound2-dev >>>>>>>>>>> >>>>>>>>>>> Thanks... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ---------------------------------------- >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Date: Wed, 2 Dec 2009 14:18:11 -0500 >>>>>>>>>>>> Subject: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy >>>>>>>>>>>> kernel >>>>>>>>>>>> 2.6.31-15-generic >>>>>>>>>>>> From: marvin.stodolsky@xxxxxxxxx >>>>>>>>>>>> To: ermante@xxxxxxxxxxx; Jacques.Goldberg@xxxxxxx; >>>>>>>>>>>> olivares14031@xxxxxxxxx >>>>>>>>>>>> >>>>>>>>>>>> Claudio, >>>>>>>>>>>> >>>>>>>>>>>> Used the attached SLMODEMD_gcc4.4_alsa1.0.21.tar.gz >>>>>>>>>>>> >>>>>>>>>>>> Jacques >>>>>>>>>>>> for the smartlink/ folder >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Dec 2, 2009 at 8:52 AM, Claudio Mantegazza wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> because i didn't find which u told me... and this one is the last >>>>>>>>>>>>> one... >>>>>>>>>>>>> >>>>>>>>>>>>> ======================================================= >>>>>>>>>>>>> Not Found >>>>>>>>>>>>> The requested URL /packages/smartlink/SLMODEMD.gcc4.4.tar.gz was >>>>>>>>>>>>> not >>>>>>>>>>>>> found on this server. >>>>>>>>>>>>> >>>>>>>>>>>>> Apache/2.0.52 (Red Hat) Server at linmodems.technion.ac.il Port 80 >>>>>>>>>>>>> ======================================================= >>>>>>>>>>>>> >>>>>>>>>>>>> Maybe i don't understand something? >>>>>>>>>>>>> Can you tell me better where i can download the right file, >>>>>>>>>>>>> please? >>>>>>>>>>>>> give me the correct link.... >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks. >>>>>>>>>>>>> Claudio. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ---------------------------------------- >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Date: Wed, 2 Dec 2009 07:15:13 -0600 >>>>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic >>>>>>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>>>>>>>> CC: discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>> >>>>>>>>>>>>>> Claudio, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I downloaded >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz >>>>>>>>>>>>>> but the install doesn't go: have a look... >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 >>>>>>>>>>>>>> [sudo] password for mant: >>>>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory >>>>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>>>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>>>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1': Invalid >>>>>>>>>>>>>> argument >>>>>>>>>>>>>> error: cannot setup device `modem:1' >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> why did you get the SLMODEMD_gcc4.4_alsa1.0.18.tar.gz? >>>>>>>>>>>>>> If your alsa verion is 1.0.20? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>>>> modems. >>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>>> folders. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>>>> playback 1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>>>> modems. >>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>>> folders. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>>>> playback 1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>>>>>> modems. >>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>>> folders. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The ALSA verion is 1.0.20 >>>>>>>>>>>>>> The modem cards detected by "aplay -l" are: >>>>>>>>>>>>>> scheda 1: Modem [Intel 82801DB-ICH4 Modem], dispositivo 0: Intel >>>>>>>>>>>>>> ICH - >>>>>>>>>>>>>> Modem [Intel 82801DB-ICH4 Modem - Modem] >>>>>>>>>>>>>> >>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 >>>>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : >>>>>>>>>>>>>> capture 1 >>>>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 >>>>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : >>>>>>>>>>>>>> playback 1 >>>>>>>>>>>>>> 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : >>>>>>>>>>>>>> playback >>>>>>>>>>>>>> 1 : capture 1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >>>>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5 >>>>>>>>>>>>>> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem >>>>>>>>>>>>>> Intel 82801DB-ICH4 Modem at irq 5 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> If you have downloaded the recommended SLMODEMD: the package >>>>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>>>> >>>>>>>>>>>>>> Does the same thing happen? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 12/2/09, Claudio Mantegazza wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I downloaded >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz >>>>>>>>>>>>>>> but the install doesn't go: have a look... >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 >>>>>>>>>>>>>>> [sudo] password for mant: >>>>>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory >>>>>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 >>>>>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 >>>>>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1': >>>>>>>>>>>>>>> Invalid >>>>>>>>>>>>>>> argument >>>>>>>>>>>>>>> error: cannot setup device `modem:1' >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> mant@mant-laptop:~/Scaricati$ wvdial >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> It doen't work! >>>>>>>>>>>>>>> the drivers doesn't load fine! >>>>>>>>>>>>>>> .... >>>>>>>>>>>>>>> Claudio. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Date: Tue, 1 Dec 2009 07:10:24 -0600 >>>>>>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic >>>>>>>>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>>>>>>>> To: ermante@xxxxxxxxxxx >>>>>>>>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; stephenpinker79@xxxxxxxxx; >>>>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Claudio, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> scanModem reports that your modem is supported via >>>>>>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For candidate modem in: 00:1f.6 >>>>>>>>>>>>>>>> 0703 Modem: Intel Corporation 82801DB/DBL/DBM >>>>>>>>>>>>>>>> Primary device ID: 8086:24c6 >>>>>>>>>>>>>>>> Subsystem PCI_id 1631:d005 >>>>>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: SIL22, a Smartlink >>>>>>>>>>>>>>>> type >>>>>>>>>>>>>>>> from Archives: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This is a NEW softmodem case! Please send the output >>>>>>>>>>>>>>>> ModemData.txt >>>>>>>>>>>>>>>> to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others! >>>>>>>>>>>>>>>> If further assistance is not needed, please use email Subject: >>>>>>>>>>>>>>>> New Case Only >>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>> Support type needed or chipset: slmodemd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver: >>>>>>>>>>>>>>>> snd-intel8x0m >>>>>>>>>>>>>>>> provides Low Level support enabling contact with the modem >>>>>>>>>>>>>>>> hardware. >>>>>>>>>>>>>>>> For all BUT Conexant chip soft modems (using hsfmodem software) >>>>>>>>>>>>>>>> complementary High Level support is through a Smartlink >>>>>>>>>>>>>>>> utility: >>>>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Download from >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>>> the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. >>>>>>>>>>>>>>>> Unpack >>>>>>>>>>>>>>>> under Linux with: >>>>>>>>>>>>>>>> $ tar zxf SLMODEMD.gcc4.4.tar.gz >>>>>>>>>>>>>>>> and read instructions therein. But briefly, the modem is setup >>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 >>>>>>>>>>>>>>>> reporting dynamic creation of ports: >>>>>>>>>>>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>>>>>>>>>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for >>>>>>>>>>>>>>>> follow >>>>>>>>>>>>>>>> through guidance. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If you have downloaded the package SLMODEMD.gcc4.4.tar.gz and >>>>>>>>>>>>>>>> tried >>>>>>>>>>>>>>>> the above instructions and are not getting anywhere/(modem does >>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>> respond) it could be because of >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For candidate card in slot 00:1f.6, firmware information and >>>>>>>>>>>>>>>> bootup >>>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>>>>>>>>> 00:1f.6 8086:24c6 1631:d005 Modem: Intel Corporation >>>>>>>>>>>>>>>> 82801DB/DBL/DBM >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>>>>>>>>> 5: 137 XT-PIC-XT yenta, Intel 82801DB-ICH4, Intel >>>>>>>>>>>>>>>> 82801DB-ICH4 Modem >>>>>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- >>>>>>>>>>>>>>>> [ 0.071472] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff] >>>>>>>>>>>>>>>> [ 0.071480] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f] >>>>>>>>>>>>>>>> [ 0.071521] pci 0000:00:1f.6: PME# supported from D0 D3hot >>>>>>>>>>>>>>>> D3cold >>>>>>>>>>>>>>>> [ 0.071525] pci 0000:00:1f.6: PME# disabled >>>>>>>>>>>>>>>> [ 0.956536] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI >>>>>>>>>>>>>>>> 5 >>>>>>>>>>>>>>>> (level, low) -> IRQ 5 >>>>>>>>>>>>>>>> [ 0.956547] serial 0000:00:1f.6: PCI INT B disabled >>>>>>>>>>>>>>>> [ 3186.856643] Intel ICH Modem 0000:00:1f.6: PCI INT B -> >>>>>>>>>>>>>>>> Link[LNKB] >>>>>>>>>>>>>>>> -> GSI 5 (level, low) -> IRQ 5 >>>>>>>>>>>>>>>> [ 3186.856669] Intel ICH Modem 0000:00:1f.6: setting latency >>>>>>>>>>>>>>>> timer to >>>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The PCI slot 00:1f.6 of the modem card may be disabled early in >>>>>>>>>>>>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>>>>>>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about >>>>>>>>>>>>>>>> possible >>>>>>>>>>>>>>>> fixes. >>>>>>>>>>>>>>>> Send dmesg.txt along with ModemData.txt to >>>>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> if help is needed. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Let us know if the package SLMODEMD.gcc4.4.tar.gz works or not, >>>>>>>>>>>>>>>> and if >>>>>>>>>>>>>>>> the driver loads fine but does not respond, follow the above >>>>>>>>>>>>>>>> instructions to see if it can work or not. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>>>>>>>>>>>> http://www.messenger.it/home_comunica.aspx >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>>>>>>>>>> http://www.messenger.it/home_comunica.aspx >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>> 25 Gigabyte per le tue foto online >>>>>>>>>>> http://www.windowslive.it/foto.aspx >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> _________________________________________________________________ >>>>>>>>> 25 Gigabyte per le tue foto online >>>>>>>>> http://www.windowslive.it/foto.aspx >>>>>>>>> >>>>>>>>> >>>>>>> >>>>>>> _________________________________________________________________ >>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger >>>>>>> http://www.messenger.it/home_comunica.aspx >>>>>>> >>>>> >>>>> >>>>> _________________________________________________________________ >>>>> I tuoi amici sempre a portata di clic, sul nuovo Web Messenger >>>>> http://www.windowslive.it/foto.aspx >>>> >>>> >>> > > _________________________________________________________________ > Scopri tuttele novità di Internet Explorer 8 > http://www.microsoft.com/italy/windows/internet-explorer/msn.aspx
