Claudio,
Did you download the file again today within about one hour back from now?
I ask because this would then be after I installed the file with alsa
stuff included.
Now, reading your report, I have a question about:
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # slmodemd -c ITALY modem:1
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# wvdial
Did you give the wvdial command in the same window where you had given
before the command slmodemd?
If yes, then to give wvdial you must have stopped slmodemd with CTRL-C
which would explain why wvdial did not find the file /dev/ttySL0 : this
file exists ONLY while slmodemd is running.
If my guess is correct, then remember to ALWAYS start wvdial IN AN OTHER
FREE WINDOW, not the one where slmodemd runs.
Jacques
Claudio Mantegazza wrote:
I made again the command you told me and in this time i didn't receive any errors....
Look at the command i wrote:
=========================
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# lsdp_dummy.c Makefile modem_comp.c modem_defs.h modem_main.o modem_test sysdep_common.c
dp_dummy.o Makefile.20080401 modem_comp.o modem_dp.h modem.o modem_test.c sysdep_common.o
dp_sinus.c modem_at.c modem_datafile.c modem_ec.c modem_pack.c modem_test.o
dp_sinus.o modem_at.o modem_datafile.o modem_ec.o modem_pack.o modem_timer.c
dsplibs.o modem.c modem_debug.c modem.h modem_param.c modem_timer.h
homolog_data.c modem_cmdline.c modem_debug.h modem_homolog.h modem_param.h modem_timer.o
homolog_data.o modem_cmdline.o modem_debug.o modem_main.c modem_param.o slmodemd
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# modprobe snd-intel8x0m
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# aplay -l
**** Lista di PLAYBACK dispositivi hardware ****
scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 0: Intel ICH [Intel 82801DB-ICH4]
Sottoperiferiche: 1/1
Sottoperiferica #0: subdevice #0
scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958]
Sottoperiferiche: 1/1
Sottoperiferica #0: subdevice #0
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # cp slmodemd /usr/sbin
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # slmodemd -c ITALY modem:1
root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
=========================
But i cannot be able to connect....
Claudio.
----------------------------------------
Date: Thu, 3 Dec 2009 14:14:59 -0600
Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic
From: olivares14031@xxxxxxxxx
To: ermante@xxxxxxxxxxx
CC: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx
Claudio,
What happens when you try
$ sudo slmodemd --alsa -c ITALY modem:1
and try from the recently compiled slmodemd in
slmodem-2.9.11-20090222/modem folder?
Regards,
Antonio
On Thu, Dec 3, 2009 at 8:01 AM, Claudio Mantegazza wrote:
Antonio,
i'm very sorry but it didn't run...
i made all that you told me but at the last command:
=========
# make SUPPORT_ALSA=1
rebuild profile...
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_main.o -c modem_main.c
modem_main.c: In function ‘setup_stream’:
modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is deprecated (declared at /usr/include/alsa/pcm.h:1116)
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_cmdline.o -c modem_cmdline.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o -c modem.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_datafile.o -c modem_datafile.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_at.o -c modem_at.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_timer.o -c modem_timer.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_pack.o -c modem_pack.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_ec.o -c modem_ec.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_comp.o -c modem_comp.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_param.o -c modem_param.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_debug.o -c modem_debug.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o homolog_data.o -c homolog_data.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o dp_sinus.o -c dp_sinus.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o dp_dummy.o -c dp_dummy.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o sysdep_common.o -c sysdep_common.c
gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_test.o -c modem_test.c
modem_test.c: In function ‘modem_test_start’:
modem_test.c:110: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result
gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so
=========
# cp slmodemd /usr/sbin
=========
# slmodemd -c ITALY modem:1
error: mdm setup: cannot stat `modem:1': No such file or directory
error: cannot setup device `modem:1'
=========
# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
=========
it seems not like it...
And now?
what can i do?
Claudio.
...............................................................................................................
----------------------------------------
Date: Thu, 3 Dec 2009 07:11:57 -0600
Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic
From: olivares14031@xxxxxxxxx
To: ermante@xxxxxxxxxxx
CC: marvin.stodolsky@xxxxxxxxx; jacques.goldberg@xxxxxxx
Claudio,
If you want to build SLMODEMD on your own for your system, Please do
the following:
Download:
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz
Copy it to your linux partition/working directory, untar it with
$ tar -zxvf slmodem-2.9.11-20090222.tar.gz
$ cd slmodem-2.9.11-20090222
$ cd modem
$ make SUPPORT_ALSA=1
as show in README
====================
3. Build application 'slmodemd' with ALSA support. For this in
slmodem-2.9.x dir:
$ cd modem
$ make SUPPORT_ALSA=1
====================
After this is successfull, then there will be a slmodemd file in that
directory, copy it over to /usr/sbin
and try the
$ sudo slmodemd -c ITALY modem:1
command again and hopefully it works this time around.
Regards,
Antonio
PS.
I hope that the "NO CARRIER" error shows up like it did for me with
2.6.31.X kernels but slamr module.
On 12/3/09, Claudio Mantegazza wrote:
I untar the new one you sent me.
i exec the command:
===============
# ./slmodemd --alsa -c ITALY modem:1
ALSA support is not compiled in (see README for howto).
===============
Now. how can i compile the ALSA support?
P.s. i just installed the package libasound2-dev
Thanks...
----------------------------------------
Date: Wed, 2 Dec 2009 14:18:11 -0500
Subject: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel
2.6.31-15-generic
From: marvin.stodolsky@xxxxxxxxx
To: ermante@xxxxxxxxxxx; Jacques.Goldberg@xxxxxxx; olivares14031@xxxxxxxxx
Claudio,
Used the attached SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
Jacques
for the smartlink/ folder
MarvS
On Wed, Dec 2, 2009 at 8:52 AM, Claudio Mantegazza wrote:
because i didn't find which u told me... and this one is the last one...
=======================================================
Not Found
The requested URL /packages/smartlink/SLMODEMD.gcc4.4.tar.gz was not
found on this server.
Apache/2.0.52 (Red Hat) Server at linmodems.technion.ac.il Port 80
=======================================================
Maybe i don't understand something?
Can you tell me better where i can download the right file, please?
give me the correct link....
Thanks.
Claudio.
----------------------------------------
Date: Wed, 2 Dec 2009 07:15:13 -0600
Subject: Re: Claudio, Italy kernel 2.6.31-15-generic
From: olivares14031@xxxxxxxxx
To: ermante@xxxxxxxxxxx
CC: discuss@xxxxxxxxxxxxx
Claudio,
I downloaded
http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz
but the install doesn't go: have a look...
=================================================
mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1
[sudo] password for mant:
error: mixer setup: attach hw:1 error: No such file or directory
ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1
error: alsa setup: cannot open playback device 'modem:1': Invalid
argument
error: cannot setup device `modem:1'
why did you get the SLMODEMD_gcc4.4_alsa1.0.18.tar.gz?
If your alsa verion is 1.0.20?
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC202 at irq 5
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC202 at irq 5
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are:
scheda 1: Modem [Intel 82801DB-ICH4 Modem], dispositivo 0: Intel ICH -
Modem [Intel 82801DB-ICH4 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback
1 : capture 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC202 at irq 5
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 5
If you have downloaded the recommended SLMODEMD: the package
SLMODEMD.gcc4.4.tar.gz
Does the same thing happen?
Regards,
Antonio
On 12/2/09, Claudio Mantegazza wrote:
I downloaded
http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz
but the install doesn't go: have a look...
=================================================
mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1
[sudo] password for mant:
error: mixer setup: attach hw:1 error: No such file or directory
ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1
error: alsa setup: cannot open playback device 'modem:1': Invalid
argument
error: cannot setup device `modem:1'
=================================================
mant@mant-laptop:~/Scaricati$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
--> Cannot open /dev/ttySL0: No such file or directory
=================================================
It doen't work!
the drivers doesn't load fine!
....
Claudio.
Date: Tue, 1 Dec 2009 07:10:24 -0600
Subject: Re: Claudio, Italy kernel 2.6.31-15-generic
From: olivares14031@xxxxxxxxx
To: ermante@xxxxxxxxxxx
CC: marvin.stodolsky@xxxxxxxxx; stephenpinker79@xxxxxxxxx;
discuss@xxxxxxxxxxxxx
Claudio,
scanModem reports that your modem is supported via
SLMODEMD.gcc4.4.tar.gz
:
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 1631:d005
Softmodem codec or chipset from diagnostics: SIL22, a Smartlink type
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
If further assistance is not needed, please use email Subject:
New Case Only
-------------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:
slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.4.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
If you have downloaded the package SLMODEMD.gcc4.4.tar.gz and tried
the above instructions and are not getting anywhere/(modem does not
respond) it could be because of
For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1631:d005 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
5: 137 XT-PIC-XT yenta, Intel 82801DB-ICH4, Intel
82801DB-ICH4 Modem
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.071472] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff]
[ 0.071480] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f]
[ 0.071521] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.071525] pci 0000:00:1f.6: PME# disabled
[ 0.956536] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 0.956547] serial 0000:00:1f.6: PCI INT B disabled
[ 3186.856643] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB]
-> GSI 5 (level, low) -> IRQ 5
[ 3186.856669] Intel ICH Modem 0000:00:1f.6: setting latency timer to
64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
Let us know if the package SLMODEMD.gcc4.4.tar.gz works or not, and if
the driver loads fine but does not respond, follow the above
instructions to see if it can work or not.
Regards,
Antonio
_________________________________________________________________
Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
http://www.messenger.it/home_comunica.aspx
_________________________________________________________________
Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
http://www.messenger.it/home_comunica.aspx
_________________________________________________________________
25 Gigabyte per le tue foto online
http://www.windowslive.it/foto.aspx
_________________________________________________________________
25 Gigabyte per le tue foto online
http://www.windowslive.it/foto.aspx
_________________________________________________________________
Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
http://www.messenger.it/home_comunica.aspx
