The modem activation command should be:
$ sudo slmodemd -c ITALY --alsa modem:1
there should be reported creation of a port:
/dev/ttySL0 --> /dev/pts/N , N some number
Only after such a success should one try;
$ sudo wvdial
MarvS
On Fri, Dec 4, 2009 at 8:06 AM, Jacques Goldberg
<Jacques.Goldberg@xxxxxxx> wrote:
> Claudio,
>
>
> I believe that you have reached such a mess level that it has become
> impossible to know which is what.
>
> Here is what I would do in your place:
>
> Because you used two versions of file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz ,
>
> 1-be root or sudo before any command
>
> 2-go into directory /usr/sbin
> 3-in that directory give command rm slmodemd*
>
> Make ABSOLUTELY SURE that you write slmodemd* so that there is NOTHING, NO
> SPACE, NOTHING ELSE, between slmodemd and the * . ABSOLUTELY SURE.
>
> Answer yes everytime you are prompted to erase a file with name starting
> with slmodemd and NO in any other case.
>
> 4-go into directory named SLMODEMD_gcc4.4_alsa1.0.21
>
> 5-in that directory give command make uninstall
>
> 6-give the command cd
>
> 7-give the command find / -iname SLMODEMD* .Attention
> SLMODEMD in capital case.
>
> This will give a list of all the files in your computer with a name
> starting with SLMODEMD
>
> Erase all these files one at a time. To erase a file the command is rm ;
> to erase an empty directory the command is rmdir; to erase a directory which
> is not empty the command is rm -rf
> Always start with rm and then try rmdir and then rm -rf if the
> preceeding one is not accepted.
>
> 8-Now, in your usual directory, the one where you usually login, download
> the file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
>
> Do not try to use one which has been downloaded before unless you are
> ABSOLUTELY sure that this is the one which I
>
> placed this morning.
>
> 9-Give the command tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
>
> 10-Change directory with command cd SLMODEMD_gcc4.4_alsa1.0.21
>
> 11-Do exactly, one time and one time only, what Marv has written to you to
> do or what is written in file README in the directory where you are starting
> from point 4 in INSTALLATION
>
> 12-After you have given the command slmodemd and it has succeeded, in
> an other window give the command
>
> wvdialconf /etc/wvdial.conf (no . in wvdialconf and a , in
> /etc/wvdial.conf
>
> wvdialconf will find your modem
>
> Edit /etc/wvdial.conf as explained in
> http://linmodems.technion.ac.il/wvdial.html . Remember that you need
>
> Carrier Check = no
>
> 13- When the file /etc/wvdial.conf has been edited and saved, in that window
> or any window except the one used for slmodemd, the command wvdial
> should start your modem.
>
> when everything works well wvdial does NOT exit but stays doing nothing.
>
> Use your browser (like Firefox) and try to surf.
>
>
> Please remember: every time you do something else than what we tell you to
> do, like installing several slmodemd , you take the risk to create the
> conditions for failure.
>
>
> Jacques
>
>
>
> Claudio Mantegazza wrote:
>
>> I downloaded again the new file.
>> i saw that there was updated 1 hour ago...
>> and in a new window (not the same about the
>> =======================
>> mantegazza@mantegazza-laptop:~/Scaricati$ wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>> mantegazza@mantegazza-laptop:~/Scaricati$ cd
>> /home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ ls
>> 1st_Read.txt COPYING Files.txt setup slmodemd
>> slmodemd.txt Testing.txt wvdial.conf
>> Changes CountryList.txt README Slmodem-ALSA.txt
>> slmodemd_Inst.txt slmodem.txt Unload.txt
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ sudo
>> ./setup
>> [sudo] password for mantegazza:
>> Installing slmodemd helper to /usr/sbin/slmodemd
>>
>> Writing log to slmodemd_Inst.txt
>> There is already installed a slmodemd of version: 2.9.11
>> There is a file /usr/sbin/slmodemd
>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11
>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking
>> for version 2.9.11
>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
>> Version verified: 2.9.11
>> Read the slmodemd_Inst.txt
>>
>> There is already installed a slmodemd of version: 2.9.11
>> There is a file /usr/sbin/slmodemd
>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11
>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking
>> for version 2.9.11
>> SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30
>> Version verified: 2.9.11
>> Read the slmodemd_Inst.txt
>>
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$
>> wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$
>> =======================
>>
>> but if in this windows i write the slmodem command:
>>
>> ======================
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$
>> slmodemd --alsa -c YOUR_COUNTRY modem:1 error: mixer setup: attach hw:1
>> error: No such file or directory
>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1
>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1
>> error: alsa setup: cannot open playback device 'modem:1': Invalid argument
>> error: cannot setup device `modem:1'
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$
>> ======================
>>
>> I receive this error....
>>
>> and if i return in the other folder and i write...
>>
>> ================
>> mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ cd
>> /home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem
>> mantegazza@mantegazza-laptop:~/Scaricati/slmodem-2.9.11-20090222/modem$
>> sudo su
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> wvdial
>> --> WvDial: Internet dialer version 1.60
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>> --> Cannot open /dev/modem: No such file or directory
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> slmodemd -c ITALY modem:1
>> error: mdm setup: cannot stat `modem:1': No such file or directory
>> error: cannot setup device `modem:1'
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> make SUPPORT_ALSA=1
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> slmodemd -c ITALY modem:1
>> error: mdm setup: cannot stat `modem:1': No such file or directory
>> error: cannot setup device `modem:1'
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> cp slmodemd /usr/sbin
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> slmodemd -c ITALY modem:1
>> error: mdm setup: cannot stat `modem:1': No such file or directory
>> error: cannot setup device `modem:1'
>>
>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>> ================
>>
>> Have you got other ideas?
>>
>> Claudio.
>>
>>
>>
>> ----------------------------------------
>>
>>>
>>> Date: Fri, 4 Dec 2009 11:17:52 +0200
>>> From: Jacques.Goldberg@xxxxxxx
>>> To: ermante@xxxxxxxxxxx
>>> CC: olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx;
>>> marvin.stodolsky@xxxxxxxxx
>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel
>>> 2.6.31-15-generic
>>>
>>> Claudio,
>>>
>>> Did you download the file again today within about one hour back from
>>> now?
>>>
>>> I ask because this would then be after I installed the file with alsa
>>> stuff included.
>>>
>>>
>>> Now, reading your report, I have a question about:
>>>
>>>
>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>> # slmodemd -c ITALY modem:1
>>>
>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>> wvdial
>>>
>>> Did you give the wvdial command in the same window where you had given
>>> before the command slmodemd?
>>>
>>> If yes, then to give wvdial you must have stopped slmodemd with CTRL-C
>>> which would explain why wvdial did not find the file /dev/ttySL0 : this
>>> file exists ONLY while slmodemd is running.
>>>
>>> If my guess is correct, then remember to ALWAYS start wvdial IN AN OTHER
>>> FREE WINDOW, not the one where slmodemd runs.
>>>
>>>
>>> Jacques
>>>
>>>
>>> Claudio Mantegazza wrote:
>>>
>>>
>>>>
>>>> I made again the command you told me and in this time i didn't receive
>>>> any errors....
>>>> Look at the command i wrote:
>>>>
>>>> =========================
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> lsdp_dummy.c Makefile modem_comp.c modem_defs.h modem_main.o modem_test
>>>> sysdep_common.c
>>>> dp_dummy.o Makefile.20080401 modem_comp.o modem_dp.h modem.o
>>>> modem_test.c sysdep_common.o
>>>> dp_sinus.c modem_at.c modem_datafile.c modem_ec.c modem_pack.c
>>>> modem_test.o
>>>> dp_sinus.o modem_at.o modem_datafile.o modem_ec.o modem_pack.o
>>>> modem_timer.c
>>>> dsplibs.o modem.c modem_debug.c modem.h modem_param.c modem_timer.h
>>>> homolog_data.c modem_cmdline.c modem_debug.h modem_homolog.h
>>>> modem_param.h modem_timer.o
>>>> homolog_data.o modem_cmdline.o modem_debug.o modem_main.c modem_param.o
>>>> slmodemd
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> modprobe snd-intel8x0m
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> aplay -l
>>>> **** Lista di PLAYBACK dispositivi hardware ****
>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 0: Intel ICH
>>>> [Intel 82801DB-ICH4]
>>>> Sottoperiferiche: 1/1
>>>> Sottoperiferica #0: subdevice #0
>>>> scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 4: Intel ICH -
>>>> IEC958 [Intel 82801DB-ICH4 - IEC958]
>>>> Sottoperiferiche: 1/1
>>>> Sottoperiferica #0: subdevice #0
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> # cp slmodemd /usr/sbin
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> # slmodemd -c ITALY modem:1
>>>>
>>>> root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#
>>>> wvdial
>>>> --> WvDial: Internet dialer version 1.60
>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>
>>>> =========================
>>>>
>>>> But i cannot be able to connect....
>>>>
>>>> Claudio.
>>>>
>>>>
>>>>
>>>> ----------------------------------------
>>>>
>>>>
>>>>>
>>>>> Date: Thu, 3 Dec 2009 14:14:59 -0600
>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy
>>>>> kernel 2.6.31-15-generic
>>>>> From: olivares14031@xxxxxxxxx
>>>>> To: ermante@xxxxxxxxxxx
>>>>> CC: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx
>>>>>
>>>>> Claudio,
>>>>>
>>>>> What happens when you try
>>>>> $ sudo slmodemd --alsa -c ITALY modem:1
>>>>>
>>>>> and try from the recently compiled slmodemd in
>>>>> slmodem-2.9.11-20090222/modem folder?
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>> Antonio
>>>>>
>>>>> On Thu, Dec 3, 2009 at 8:01 AM, Claudio Mantegazza wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> Antonio,
>>>>>> i'm very sorry but it didn't run...
>>>>>>
>>>>>> i made all that you told me but at the last command:
>>>>>>
>>>>>> =========
>>>>>> # make SUPPORT_ALSA=1
>>>>>> rebuild profile...
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_main.o -c modem_main.c
>>>>>> modem_main.c: In function ‘setup_stream’:
>>>>>> modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is
>>>>>> deprecated (declared at /usr/include/alsa/pcm.h:1116)
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_cmdline.o -c modem_cmdline.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o
>>>>>> -c modem.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_datafile.o -c modem_datafile.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_at.o -c modem_at.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_timer.o -c modem_timer.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_pack.o -c modem_pack.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_ec.o -c modem_ec.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_comp.o -c modem_comp.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_param.o -c modem_param.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_debug.o -c modem_debug.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> homolog_data.o -c homolog_data.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> dp_sinus.o -c dp_sinus.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> dp_dummy.o -c dp_dummy.c
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> sysdep_common.o -c sysdep_common.c
>>>>>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
>>>>>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o
>>>>>> modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o
>>>>>> /usr/lib/libasound.so
>>>>>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
>>>>>> modem_test.o -c modem_test.c
>>>>>> modem_test.c: In function ‘modem_test_start’:
>>>>>> modem_test.c:110: warning: ignoring return value of ‘write’, declared
>>>>>> with attribute warn_unused_result
>>>>>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o
>>>>>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
>>>>>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
>>>>>> dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so
>>>>>>
>>>>>>
>>>>>> =========
>>>>>>
>>>>>>
>>>>>> # cp slmodemd /usr/sbin
>>>>>>
>>>>>> =========
>>>>>> # slmodemd -c ITALY modem:1
>>>>>> error: mdm setup: cannot stat `modem:1': No such file or directory
>>>>>> error: cannot setup device `modem:1'
>>>>>> =========
>>>>>> # wvdial
>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>> =========
>>>>>>
>>>>>> it seems not like it...
>>>>>>
>>>>>> And now?
>>>>>> what can i do?
>>>>>>
>>>>>> Claudio.
>>>>>>
>>>>>>
>>>>>> ...............................................................................................................
>>>>>>
>>>>>> ----------------------------------------
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Date: Thu, 3 Dec 2009 07:11:57 -0600
>>>>>>> Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy
>>>>>>> kernel 2.6.31-15-generic
>>>>>>> From: olivares14031@xxxxxxxxx
>>>>>>> To: ermante@xxxxxxxxxxx
>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; jacques.goldberg@xxxxxxx
>>>>>>>
>>>>>>> Claudio,
>>>>>>>
>>>>>>> If you want to build SLMODEMD on your own for your system, Please do
>>>>>>> the following:
>>>>>>>
>>>>>>> Download:
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz
>>>>>>> Copy it to your linux partition/working directory, untar it with
>>>>>>> $ tar -zxvf slmodem-2.9.11-20090222.tar.gz
>>>>>>> $ cd slmodem-2.9.11-20090222
>>>>>>> $ cd modem
>>>>>>> $ make SUPPORT_ALSA=1
>>>>>>>
>>>>>>> as show in README
>>>>>>>
>>>>>>> ====================
>>>>>>> 3. Build application 'slmodemd' with ALSA support. For this in
>>>>>>> slmodem-2.9.x dir:
>>>>>>>
>>>>>>> $ cd modem
>>>>>>> $ make SUPPORT_ALSA=1
>>>>>>> ====================
>>>>>>>
>>>>>>> After this is successfull, then there will be a slmodemd file in that
>>>>>>> directory, copy it over to /usr/sbin
>>>>>>>
>>>>>>> and try the
>>>>>>> $ sudo slmodemd -c ITALY modem:1
>>>>>>>
>>>>>>> command again and hopefully it works this time around.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>> Antonio
>>>>>>>
>>>>>>> PS.
>>>>>>> I hope that the "NO CARRIER" error shows up like it did for me with
>>>>>>> 2.6.31.X kernels but slamr module.
>>>>>>>
>>>>>>> On 12/3/09, Claudio Mantegazza wrote:
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> I untar the new one you sent me.
>>>>>>>> i exec the command:
>>>>>>>>
>>>>>>>> ===============
>>>>>>>> # ./slmodemd --alsa -c ITALY modem:1
>>>>>>>> ALSA support is not compiled in (see README for howto).
>>>>>>>> ===============
>>>>>>>>
>>>>>>>> Now. how can i compile the ALSA support?
>>>>>>>>
>>>>>>>> P.s. i just installed the package libasound2-dev
>>>>>>>>
>>>>>>>> Thanks...
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ----------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Date: Wed, 2 Dec 2009 14:18:11 -0500
>>>>>>>>> Subject: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy
>>>>>>>>> kernel
>>>>>>>>> 2.6.31-15-generic
>>>>>>>>> From: marvin.stodolsky@xxxxxxxxx
>>>>>>>>> To: ermante@xxxxxxxxxxx; Jacques.Goldberg@xxxxxxx;
>>>>>>>>> olivares14031@xxxxxxxxx
>>>>>>>>>
>>>>>>>>> Claudio,
>>>>>>>>>
>>>>>>>>> Used the attached SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
>>>>>>>>>
>>>>>>>>> Jacques
>>>>>>>>> for the smartlink/ folder
>>>>>>>>>
>>>>>>>>> MarvS
>>>>>>>>>
>>>>>>>>> On Wed, Dec 2, 2009 at 8:52 AM, Claudio Mantegazza wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> because i didn't find which u told me... and this one is the last
>>>>>>>>>> one...
>>>>>>>>>>
>>>>>>>>>> =======================================================
>>>>>>>>>> Not Found
>>>>>>>>>> The requested URL /packages/smartlink/SLMODEMD.gcc4.4.tar.gz was
>>>>>>>>>> not
>>>>>>>>>> found on this server.
>>>>>>>>>>
>>>>>>>>>> Apache/2.0.52 (Red Hat) Server at linmodems.technion.ac.il Port 80
>>>>>>>>>> =======================================================
>>>>>>>>>>
>>>>>>>>>> Maybe i don't understand something?
>>>>>>>>>> Can you tell me better where i can download the right file,
>>>>>>>>>> please?
>>>>>>>>>> give me the correct link....
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>> Claudio.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ----------------------------------------
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Date: Wed, 2 Dec 2009 07:15:13 -0600
>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic
>>>>>>>>>>> From: olivares14031@xxxxxxxxx
>>>>>>>>>>> To: ermante@xxxxxxxxxxx
>>>>>>>>>>> CC: discuss@xxxxxxxxxxxxx
>>>>>>>>>>>
>>>>>>>>>>> Claudio,
>>>>>>>>>>>
>>>>>>>>>>> I downloaded
>>>>>>>>>>>
>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz
>>>>>>>>>>> but the install doesn't go: have a look...
>>>>>>>>>>> =================================================
>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1
>>>>>>>>>>> [sudo] password for mant:
>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory
>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1
>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1
>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1': Invalid
>>>>>>>>>>> argument
>>>>>>>>>>> error: cannot setup device `modem:1'
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> why did you get the SLMODEMD_gcc4.4_alsa1.0.18.tar.gz?
>>>>>>>>>>> If your alsa verion is 1.0.20?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some
>>>>>>>>>>> modems.
>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/
>>>>>>>>>>> folders.
>>>>>>>>>>>
>>>>>>>>>>> The ALSA verion is 1.0.20
>>>>>>>>>>> The modem cards detected by "aplay -l" are: None
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> The /proc/asound/pcm file reports:
>>>>>>>>>>> -----------------------
>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 :
>>>>>>>>>>> playback 1
>>>>>>>>>>>
>>>>>>>>>>> about /proc/asound/cards:
>>>>>>>>>>> ------------------------
>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5
>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some
>>>>>>>>>>> modems.
>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/
>>>>>>>>>>> folders.
>>>>>>>>>>>
>>>>>>>>>>> The ALSA verion is 1.0.20
>>>>>>>>>>> The modem cards detected by "aplay -l" are: None
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> The /proc/asound/pcm file reports:
>>>>>>>>>>> -----------------------
>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 :
>>>>>>>>>>> playback 1
>>>>>>>>>>>
>>>>>>>>>>> about /proc/asound/cards:
>>>>>>>>>>> ------------------------
>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5
>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>>>>>>>>>>> The ALSA packages provide audio support and also drivers for some
>>>>>>>>>>> modems.
>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/
>>>>>>>>>>> folders.
>>>>>>>>>>>
>>>>>>>>>>> The ALSA verion is 1.0.20
>>>>>>>>>>> The modem cards detected by "aplay -l" are:
>>>>>>>>>>> scheda 1: Modem [Intel 82801DB-ICH4 Modem], dispositivo 0: Intel
>>>>>>>>>>> ICH -
>>>>>>>>>>> Modem [Intel 82801DB-ICH4 Modem - Modem]
>>>>>>>>>>>
>>>>>>>>>>> The /proc/asound/pcm file reports:
>>>>>>>>>>> -----------------------
>>>>>>>>>>> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
>>>>>>>>>>> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC :
>>>>>>>>>>> capture 1
>>>>>>>>>>> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
>>>>>>>>>>> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 :
>>>>>>>>>>> playback 1
>>>>>>>>>>> 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem :
>>>>>>>>>>> playback
>>>>>>>>>>> 1 : capture 1
>>>>>>>>>>>
>>>>>>>>>>> about /proc/asound/cards:
>>>>>>>>>>> ------------------------
>>>>>>>>>>> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
>>>>>>>>>>> Intel 82801DB-ICH4 with ALC202 at irq 5
>>>>>>>>>>> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
>>>>>>>>>>> Intel 82801DB-ICH4 Modem at irq 5
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> If you have downloaded the recommended SLMODEMD: the package
>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz
>>>>>>>>>>>
>>>>>>>>>>> Does the same thing happen?
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Antonio
>>>>>>>>>>>
>>>>>>>>>>> On 12/2/09, Claudio Mantegazza wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I downloaded
>>>>>>>>>>>>
>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz
>>>>>>>>>>>> but the install doesn't go: have a look...
>>>>>>>>>>>> =================================================
>>>>>>>>>>>> mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1
>>>>>>>>>>>> [sudo] password for mant:
>>>>>>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory
>>>>>>>>>>>> ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1
>>>>>>>>>>>> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1
>>>>>>>>>>>> error: alsa setup: cannot open playback device 'modem:1':
>>>>>>>>>>>> Invalid
>>>>>>>>>>>> argument
>>>>>>>>>>>> error: cannot setup device `modem:1'
>>>>>>>>>>>> =================================================
>>>>>>>>>>>> mant@mant-laptop:~/Scaricati$ wvdial
>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>>>>>>> =================================================
>>>>>>>>>>>> It doen't work!
>>>>>>>>>>>> the drivers doesn't load fine!
>>>>>>>>>>>> ....
>>>>>>>>>>>> Claudio.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Date: Tue, 1 Dec 2009 07:10:24 -0600
>>>>>>>>>>>>> Subject: Re: Claudio, Italy kernel 2.6.31-15-generic
>>>>>>>>>>>>> From: olivares14031@xxxxxxxxx
>>>>>>>>>>>>> To: ermante@xxxxxxxxxxx
>>>>>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; stephenpinker79@xxxxxxxxx;
>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx
>>>>>>>>>>>>>
>>>>>>>>>>>>> Claudio,
>>>>>>>>>>>>>
>>>>>>>>>>>>> scanModem reports that your modem is supported via
>>>>>>>>>>>>> SLMODEMD.gcc4.4.tar.gz
>>>>>>>>>>>>> :
>>>>>>>>>>>>>
>>>>>>>>>>>>> For candidate modem in: 00:1f.6
>>>>>>>>>>>>> 0703 Modem: Intel Corporation 82801DB/DBL/DBM
>>>>>>>>>>>>> Primary device ID: 8086:24c6
>>>>>>>>>>>>> Subsystem PCI_id 1631:d005
>>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: SIL22, a Smartlink
>>>>>>>>>>>>> type
>>>>>>>>>>>>> from Archives:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is a NEW softmodem case! Please send the output
>>>>>>>>>>>>> ModemData.txt
>>>>>>>>>>>>> to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
>>>>>>>>>>>>> If further assistance is not needed, please use email Subject:
>>>>>>>>>>>>> New Case Only
>>>>>>>>>>>>> -------------------------------------------
>>>>>>>>>>>>> Support type needed or chipset: slmodemd
>>>>>>>>>>>>>
>>>>>>>>>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver:
>>>>>>>>>>>>> snd-intel8x0m
>>>>>>>>>>>>> provides Low Level support enabling contact with the modem
>>>>>>>>>>>>> hardware.
>>>>>>>>>>>>> For all BUT Conexant chip soft modems (using hsfmodem software)
>>>>>>>>>>>>> complementary High Level support is through a Smartlink
>>>>>>>>>>>>> utility:
>>>>>>>>>>>>> slmodemd
>>>>>>>>>>>>>
>>>>>>>>>>>>> Download from
>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/
>>>>>>>>>>>>> the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd.
>>>>>>>>>>>>> Unpack
>>>>>>>>>>>>> under Linux with:
>>>>>>>>>>>>> $ tar zxf SLMODEMD.gcc4.4.tar.gz
>>>>>>>>>>>>> and read instructions therein. But briefly, the modem is setup
>>>>>>>>>>>>> with
>>>>>>>>>>>>> command:
>>>>>>>>>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
>>>>>>>>>>>>> reporting dynamic creation of ports:
>>>>>>>>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number
>>>>>>>>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for
>>>>>>>>>>>>> follow
>>>>>>>>>>>>> through guidance.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> If you have downloaded the package SLMODEMD.gcc4.4.tar.gz and
>>>>>>>>>>>>> tried
>>>>>>>>>>>>> the above instructions and are not getting anywhere/(modem does
>>>>>>>>>>>>> not
>>>>>>>>>>>>> respond) it could be because of
>>>>>>>>>>>>>
>>>>>>>>>>>>> For candidate card in slot 00:1f.6, firmware information and
>>>>>>>>>>>>> bootup
>>>>>>>>>>>>> diagnostics are:
>>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name
>>>>>>>>>>>>> ---------- --------- --------- --------------
>>>>>>>>>>>>> 00:1f.6 8086:24c6 1631:d005 Modem: Intel Corporation
>>>>>>>>>>>>> 82801DB/DBL/DBM
>>>>>>>>>>>>>
>>>>>>>>>>>>> Modem interrupt assignment and sharing:
>>>>>>>>>>>>> 5: 137 XT-PIC-XT yenta, Intel 82801DB-ICH4, Intel
>>>>>>>>>>>>> 82801DB-ICH4 Modem
>>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
>>>>>>>>>>>>> [ 0.071472] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff]
>>>>>>>>>>>>> [ 0.071480] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f]
>>>>>>>>>>>>> [ 0.071521] pci 0000:00:1f.6: PME# supported from D0 D3hot
>>>>>>>>>>>>> D3cold
>>>>>>>>>>>>> [ 0.071525] pci 0000:00:1f.6: PME# disabled
>>>>>>>>>>>>> [ 0.956536] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI
>>>>>>>>>>>>> 5
>>>>>>>>>>>>> (level, low) -> IRQ 5
>>>>>>>>>>>>> [ 0.956547] serial 0000:00:1f.6: PCI INT B disabled
>>>>>>>>>>>>> [ 3186.856643] Intel ICH Modem 0000:00:1f.6: PCI INT B ->
>>>>>>>>>>>>> Link[LNKB]
>>>>>>>>>>>>> -> GSI 5 (level, low) -> IRQ 5
>>>>>>>>>>>>> [ 3186.856669] Intel ICH Modem 0000:00:1f.6: setting latency
>>>>>>>>>>>>> timer to
>>>>>>>>>>>>> 64
>>>>>>>>>>>>>
>>>>>>>>>>>>> The PCI slot 00:1f.6 of the modem card may be disabled early in
>>>>>>>>>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>>>>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about
>>>>>>>>>>>>> possible
>>>>>>>>>>>>> fixes.
>>>>>>>>>>>>> Send dmesg.txt along with ModemData.txt to
>>>>>>>>>>>>> discuss@xxxxxxxxxxxxx
>>>>>>>>>>>>> if help is needed.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Let us know if the package SLMODEMD.gcc4.4.tar.gz works or not,
>>>>>>>>>>>>> and if
>>>>>>>>>>>>> the driver loads fine but does not respond, follow the above
>>>>>>>>>>>>> instructions to see if it can work or not.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Antonio
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _________________________________________________________________
>>>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
>>>>>>>>>>>> http://www.messenger.it/home_comunica.aspx
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _________________________________________________________________
>>>>>>>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
>>>>>>>>>> http://www.messenger.it/home_comunica.aspx
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>>> _________________________________________________________________
>>>>>>>> 25 Gigabyte per le tue foto online
>>>>>>>> http://www.windowslive.it/foto.aspx
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>> _________________________________________________________________
>>>>>> 25 Gigabyte per le tue foto online
>>>>>> http://www.windowslive.it/foto.aspx
>>>>>>
>>>>>>
>>>>
>>>> _________________________________________________________________
>>>> Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger
>>>> http://www.messenger.it/home_comunica.aspx
>>>>
>>
>>
>> _________________________________________________________________
>> I tuoi amici sempre a portata di clic, sul nuovo Web Messenger
>> http://www.windowslive.it/foto.aspx
>
>
