Claudio,I believe that you have reached such a mess level that it has become impossible to know which is what.
Here is what I would do in your place: Because you used two versions of file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz , 1-be root or sudo before any command2-go into directory /usr/sbin
3-in that directory give command rm slmodemd*Make ABSOLUTELY SURE that you write slmodemd* so that there is NOTHING, NO SPACE, NOTHING ELSE, between slmodemd and the * . ABSOLUTELY SURE.
Answer yes everytime you are prompted to erase a file with name starting with slmodemd and NO in any other case.
4-go into directory named SLMODEMD_gcc4.4_alsa1.0.21 5-in that directory give command make uninstall 6-give the command cd7-give the command find / -iname SLMODEMD* .Attention SLMODEMD in capital case.
This will give a list of all the files in your computer with a name starting with SLMODEMD
Erase all these files one at a time. To erase a file the command is rm ; to erase an empty directory the command is rmdir; to erase a directory which is not empty the command is rm -rf Always start with rm and then try rmdir and then rm -rf if the preceeding one is not accepted.
8-Now, in your usual directory, the one where you usually login, download the file SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
Do not try to use one which has been downloaded before unless you are ABSOLUTELY sure that this is the one which I
placed this morning. 9-Give the command tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz 10-Change directory with command cd SLMODEMD_gcc4.4_alsa1.0.2111-Do exactly, one time and one time only, what Marv has written to you to do or what is written in file README in the directory where you are starting from point 4 in INSTALLATION
12-After you have given the command slmodemd and it has succeeded, in an other window give the command
wvdialconf /etc/wvdial.conf (no . in wvdialconf and a , in /etc/wvdial.conf
wvdialconf will find your modem
Edit /etc/wvdial.conf as explained in
http://linmodems.technion.ac.il/wvdial.html . Remember that you need
Carrier Check = no
13- When the file /etc/wvdial.conf has been edited and saved, in that
window or any window except the one used for slmodemd, the command
wvdial should start your modem.
when everything works well wvdial does NOT exit but stays doing nothing. Use your browser (like Firefox) and try to surf.Please remember: every time you do something else than what we tell you to do, like installing several slmodemd , you take the risk to create the conditions for failure.
Jacques
Claudio Mantegazza wrote:
I downloaded again the new file. i saw that there was updated 1 hour ago...and in a new window (not the same about the======================= mantegazza@mantegazza-laptop:~/Scaricati$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory mantegazza@mantegazza-laptop:~/Scaricati$ cd /home/mantegazza/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21 mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ ls 1st_Read.txt COPYING Files.txt setup slmodemd slmodemd.txt Testing.txt wvdial.conf Changes CountryList.txt README Slmodem-ALSA.txt slmodemd_Inst.txt slmodem.txt Unload.txt mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ sudo ./setup[sudo] password for mantegazza:Installing slmodemd helper to /usr/sbin/slmodemd Writing log to slmodemd_Inst.txt There is already installed a slmodemd of version: 2.9.11 There is a file /usr/sbin/slmodemd Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking for version 2.9.11 SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 Version verified: 2.9.11 Read the slmodemd_Inst.txt There is already installed a slmodemd of version: 2.9.11 There is a file /usr/sbin/slmodemd Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking for version 2.9.11 SmartLink Soft Modem: version 2.9.11 Dec 3 2009 16:59:30 Version verified: 2.9.11 Read the slmodemd_Inst.txt mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directorymantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$======================= but if in this windows i write the slmodem command: ======================mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ slmodemd --alsa -c YOUR_COUNTRY modem:1 error: mixer setup: attach hw:1 error: No such file or directoryALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 error: alsa setup: cannot open playback device 'modem:1': Invalid argument error: cannot setup device `modem:1'mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$====================== I receive this error.... and if i return in the other folder and i write... ================ mantegazza@mantegazza-laptop:~/Scaricati/SLMODEMD_gcc4.4_alsa1.0.21$ cd /home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem mantegazza@mantegazza-laptop:~/Scaricati/slmodem-2.9.11-20090222/modem$ sudo su root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# slmodemd -c ITALY modem:1 error: mdm setup: cannot stat `modem:1': No such file or directory error: cannot setup device `modem:1' root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# make SUPPORT_ALSA=1 root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# slmodemd -c ITALY modem:1 error: mdm setup: cannot stat `modem:1': No such file or directory error: cannot setup device `modem:1' root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# cp slmodemd /usr/sbin root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# slmodemd -c ITALY modem:1 error: mdm setup: cannot stat `modem:1': No such file or directory error: cannot setup device `modem:1'root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem#================ Have you got other ideas? Claudio. ----------------------------------------_________________________________________________________________Date: Fri, 4 Dec 2009 11:17:52 +0200 From: Jacques.Goldberg@xxxxxxx To: ermante@xxxxxxxxxxx CC: olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic Claudio, Did you download the file again today within about one hour back from now? I ask because this would then be after I installed the file with alsa stuff included. Now, reading your report, I have a question about: root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # slmodemd -c ITALY modem:1 root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# wvdial Did you give the wvdial command in the same window where you had given before the command slmodemd? If yes, then to give wvdial you must have stopped slmodemd with CTRL-C which would explain why wvdial did not find the file /dev/ttySL0 : this file exists ONLY while slmodemd is running. If my guess is correct, then remember to ALWAYS start wvdial IN AN OTHER FREE WINDOW, not the one where slmodemd runs. Jacques Claudio Mantegazza wrote:I made again the command you told me and in this time i didn't receive any errors.... Look at the command i wrote: ========================= root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# lsdp_dummy.c Makefile modem_comp.c modem_defs.h modem_main.o modem_test sysdep_common.c dp_dummy.o Makefile.20080401 modem_comp.o modem_dp.h modem.o modem_test.c sysdep_common.o dp_sinus.c modem_at.c modem_datafile.c modem_ec.c modem_pack.c modem_test.o dp_sinus.o modem_at.o modem_datafile.o modem_ec.o modem_pack.o modem_timer.c dsplibs.o modem.c modem_debug.c modem.h modem_param.c modem_timer.h homolog_data.c modem_cmdline.c modem_debug.h modem_homolog.h modem_param.h modem_timer.o homolog_data.o modem_cmdline.o modem_debug.o modem_main.c modem_param.o slmodemd root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# modprobe snd-intel8x0m root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# aplay -l **** Lista di PLAYBACK dispositivi hardware **** scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 0: Intel ICH [Intel 82801DB-ICH4] Sottoperiferiche: 1/1 Sottoperiferica #0: subdevice #0 scheda 0: I82801DBICH4 [Intel 82801DB-ICH4], dispositivo 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] Sottoperiferiche: 1/1 Sottoperiferica #0: subdevice #0 root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # cp slmodemd /usr/sbin root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# # slmodemd -c ITALY modem:1 root@mantegazza-laptop:/home/mantegazza/Scaricati/slmodem-2.9.11-20090222/modem# wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory ========================= But i cannot be able to connect.... Claudio. ----------------------------------------Date: Thu, 3 Dec 2009 14:14:59 -0600 Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic From: olivares14031@xxxxxxxxx To: ermante@xxxxxxxxxxx CC: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx Claudio, What happens when you try $ sudo slmodemd --alsa -c ITALY modem:1 and try from the recently compiled slmodemd in slmodem-2.9.11-20090222/modem folder? Regards, Antonio On Thu, Dec 3, 2009 at 8:01 AM, Claudio Mantegazza wrote:Antonio, i'm very sorry but it didn't run... i made all that you told me but at the last command: ========= # make SUPPORT_ALSA=1 rebuild profile... gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_main.o -c modem_main.c modem_main.c: In function ‘setup_stream’: modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is deprecated (declared at /usr/include/alsa/pcm.h:1116) gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_cmdline.o -c modem_cmdline.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o -c modem.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_datafile.o -c modem_datafile.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_at.o -c modem_at.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_timer.o -c modem_timer.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_pack.o -c modem_pack.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_ec.o -c modem_ec.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_comp.o -c modem_comp.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_param.o -c modem_param.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_debug.o -c modem_debug.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o homolog_data.o -c homolog_data.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o dp_sinus.o -c dp_sinus.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o dp_dummy.o -c dp_dummy.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o sysdep_common.o -c sysdep_common.c gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem_test.o -c modem_test.c modem_test.c: In function ‘modem_test_start’: modem_test.c:110: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so ========= # cp slmodemd /usr/sbin ========= # slmodemd -c ITALY modem:1 error: mdm setup: cannot stat `modem:1': No such file or directory error: cannot setup device `modem:1' ========= # wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory ========= it seems not like it... And now? what can i do? Claudio. ............................................................................................................... ----------------------------------------Date: Thu, 3 Dec 2009 07:11:57 -0600 Subject: Re: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic From: olivares14031@xxxxxxxxx To: ermante@xxxxxxxxxxx CC: marvin.stodolsky@xxxxxxxxx; jacques.goldberg@xxxxxxx Claudio, If you want to build SLMODEMD on your own for your system, Please do the following: Download: http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz Copy it to your linux partition/working directory, untar it with $ tar -zxvf slmodem-2.9.11-20090222.tar.gz $ cd slmodem-2.9.11-20090222 $ cd modem $ make SUPPORT_ALSA=1 as show in README ==================== 3. Build application 'slmodemd' with ALSA support. For this in slmodem-2.9.x dir: $ cd modem $ make SUPPORT_ALSA=1 ==================== After this is successfull, then there will be a slmodemd file in that directory, copy it over to /usr/sbin and try the $ sudo slmodemd -c ITALY modem:1 command again and hopefully it works this time around. Regards, Antonio PS. I hope that the "NO CARRIER" error shows up like it did for me with 2.6.31.X kernels but slamr module. On 12/3/09, Claudio Mantegazza wrote:I untar the new one you sent me. i exec the command: =============== # ./slmodemd --alsa -c ITALY modem:1 ALSA support is not compiled in (see README for howto). =============== Now. how can i compile the ALSA support? P.s. i just installed the package libasound2-dev Thanks... ----------------------------------------Date: Wed, 2 Dec 2009 14:18:11 -0500 Subject: SLMODEMD_gcc4.4_alsa1.0.21.tar.gz, Re: Claudio, Italy kernel 2.6.31-15-generic From: marvin.stodolsky@xxxxxxxxx To: ermante@xxxxxxxxxxx; Jacques.Goldberg@xxxxxxx; olivares14031@xxxxxxxxx Claudio, Used the attached SLMODEMD_gcc4.4_alsa1.0.21.tar.gz Jacques for the smartlink/ folder MarvS On Wed, Dec 2, 2009 at 8:52 AM, Claudio Mantegazza wrote:because i didn't find which u told me... and this one is the last one... ======================================================= Not Found The requested URL /packages/smartlink/SLMODEMD.gcc4.4.tar.gz was not found on this server. Apache/2.0.52 (Red Hat) Server at linmodems.technion.ac.il Port 80 ======================================================= Maybe i don't understand something? Can you tell me better where i can download the right file, please? give me the correct link.... Thanks. Claudio. ----------------------------------------Date: Wed, 2 Dec 2009 07:15:13 -0600 Subject: Re: Claudio, Italy kernel 2.6.31-15-generic From: olivares14031@xxxxxxxxx To: ermante@xxxxxxxxxxx CC: discuss@xxxxxxxxxxxxx Claudio, I downloaded http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz but the install doesn't go: have a look... ================================================= mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 [sudo] password for mant: error: mixer setup: attach hw:1 error: No such file or directory ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 error: alsa setup: cannot open playback device 'modem:1': Invalid argument error: cannot setup device `modem:1' why did you get the SLMODEMD_gcc4.4_alsa1.0.18.tar.gz? If your alsa verion is 1.0.20? ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== The ALSA packages provide audio support and also drivers for some modems. ALSA diagnostics are written during bootup to /proc/asound/ folders. The ALSA verion is 1.0.20 The modem cards detected by "aplay -l" are: None The /proc/asound/pcm file reports: ----------------------- 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 about /proc/asound/cards: ------------------------ 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with ALC202 at irq 5 ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== The ALSA packages provide audio support and also drivers for some modems. ALSA diagnostics are written during bootup to /proc/asound/ folders. The ALSA verion is 1.0.20 The modem cards detected by "aplay -l" are: None The /proc/asound/pcm file reports: ----------------------- 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 about /proc/asound/cards: ------------------------ 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with ALC202 at irq 5 ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== The ALSA packages provide audio support and also drivers for some modems. ALSA diagnostics are written during bootup to /proc/asound/ folders. The ALSA verion is 1.0.20 The modem cards detected by "aplay -l" are: scheda 1: Modem [Intel 82801DB-ICH4 Modem], dispositivo 0: Intel ICH - Modem [Intel 82801DB-ICH4 Modem - Modem] The /proc/asound/pcm file reports: ----------------------- 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1 : capture 1 about /proc/asound/cards: ------------------------ 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with ALC202 at irq 5 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem Intel 82801DB-ICH4 Modem at irq 5 If you have downloaded the recommended SLMODEMD: the package SLMODEMD.gcc4.4.tar.gz Does the same thing happen? Regards, Antonio On 12/2/09, Claudio Mantegazza wrote:I downloaded http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.4_alsa1.0.18.tar.gz but the install doesn't go: have a look... ================================================= mant@mant-laptop:~$ sudo slmodemd -c ITALY --alsa modem:1 [sudo] password for mant: error: mixer setup: attach hw:1 error: No such file or directory ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 1 ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM modem:1 error: alsa setup: cannot open playback device 'modem:1': Invalid argument error: cannot setup device `modem:1' ================================================= mant@mant-laptop:~/Scaricati$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory --> Cannot open /dev/ttySL0: No such file or directory ================================================= It doen't work! the drivers doesn't load fine! .... Claudio.Date: Tue, 1 Dec 2009 07:10:24 -0600 Subject: Re: Claudio, Italy kernel 2.6.31-15-generic From: olivares14031@xxxxxxxxx To: ermante@xxxxxxxxxxx CC: marvin.stodolsky@xxxxxxxxx; stephenpinker79@xxxxxxxxx; discuss@xxxxxxxxxxxxx Claudio, scanModem reports that your modem is supported via SLMODEMD.gcc4.4.tar.gz : For candidate modem in: 00:1f.6 0703 Modem: Intel Corporation 82801DB/DBL/DBM Primary device ID: 8086:24c6 Subsystem PCI_id 1631:d005 Softmodem codec or chipset from diagnostics: SIL22, a Smartlink type from Archives: This is a NEW softmodem case! Please send the output ModemData.txt to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others! If further assistance is not needed, please use email Subject: New Case Only ------------------------------------------- Support type needed or chipset: slmodemd An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems (using hsfmodem software) complementary High Level support is through a Smartlink utility: slmodemd Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.4.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. If you have downloaded the package SLMODEMD.gcc4.4.tar.gz and tried the above instructions and are not getting anywhere/(modem does not respond) it could be because of For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1f.6 8086:24c6 1631:d005 Modem: Intel Corporation 82801DB/DBL/DBM Modem interrupt assignment and sharing: 5: 137 XT-PIC-XT yenta, Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- [ 0.071472] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff] [ 0.071480] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f] [ 0.071521] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.071525] pci 0000:00:1f.6: PME# disabled [ 0.956536] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.956547] serial 0000:00:1f.6: PCI INT B disabled [ 3186.856643] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 3186.856669] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. Let us know if the package SLMODEMD.gcc4.4.tar.gz works or not, and if the driver loads fine but does not respond, follow the above instructions to see if it can work or not. Regards, Antonio_________________________________________________________________ Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger http://www.messenger.it/home_comunica.aspx_________________________________________________________________ Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger http://www.messenger.it/home_comunica.aspx_________________________________________________________________ 25 Gigabyte per le tue foto online http://www.windowslive.it/foto.aspx_________________________________________________________________ 25 Gigabyte per le tue foto online http://www.windowslive.it/foto.aspx_________________________________________________________________ Giochi, radio, TV... E tutti i tuoi amici. Cercali su Messenger http://www.messenger.it/home_comunica.aspxI tuoi amici sempre a portata di clic, sul nuovo Web Messenger http://www.windowslive.it/foto.aspx
