Hi Jacques:
I only hear the modem dial as it is booting or when I tell gnome-ppp
to dial. Gnome-ppp does say the modem is there when you query it. And I
have copied and pasted the commands just as I was asked to. With wvdial
it does nothing.
No one has asked me to run once sudo wvdialconf /etc/wvdial.conf .
forrest@warden-Ubu-1:~$ run once sudo wvdialconf /etc/wvdial.conf
bash: run: command not
When I pasted the command without the run once this happened:
forrest@warden-Ubu-1:~$ sudo wvdialconf /etc/wvdial.conf
[sudo] password for forrest:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to
it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Modem Port Scan<*1>: S1 S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5
Modem Port Scan<*1>: SHSF6 SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
forrest@warden-Ubu-1:~$
I open the config file with sudo gedit /etc/wvdial.conf and as always,
the information is there.
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = 2990051
Modem = /dev/modem
Username = fpcharnock@xxxxxxxxxxxxx
Password = ***********
Baud = 460800
Then I typed sudo wvdial
forrest@warden-Ubu-1:~$ sudo wvdial
[sudo] password for forrest:
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT2990051
--> Waiting for carrier.
ATDT2990051
CONNECT 460800
--> Carrier detected. Waiting for prompt.
Level 3 Comm nas19.nvl1 UQKT2
Username:/login:/Login:
--> Looks like a login prompt.
--> Sending: fpcharnock@xxxxxxxxxxxxx
fpcharnock@xxxxxxxxxxxxx
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP Session.
IP address is 4.153.65.134
MTU is 1524.
--> Looks like a welcome message.
--> Starting pppd at Thu Nov 19 21:36:02 2009
--> Pid of pppd: 6612
--> Using interface ppp0
--> pppd: ��2[08]��2[08]
--> pppd: ��2[08]��2[08]
--> pppd: ��2[08]��2[08]
--> local IP address 4.153.65.134
--> pppd: ��2[08]��2[08]
--> remote IP address 209.244.16.217
--> pppd: ��2[08]��2[08]
--> primary DNS address 207.69.188.187
--> pppd: ��2[08]��2[08]
--> secondary DNS address 207.69.188.186
--> pppd: ��2[08]��2[08]
This time I heard it dial but it was not online so I typed
sudo cp /etc/ppp/resolv.conf /etc/resolv.conf and nothing happened so I
typed sudo ifconfig -a and this happened:
forrest@warden-Ubu-1:~$ sudo cp /etc/ppp/resolv.conf /etc/resolv.conf
[sudo] password for forrest:
forrest@warden-Ubu-1:~$ sudo ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1d:09:93:8e:fa
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:4817 errors:0 dropped:0 overruns:0 frame:0
TX packets:4185 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3638002 (3.6 MB) TX bytes:1165844 (1.1 MB)
Memory:fdfc0000-fdfe0000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3808 (3.8 KB) TX bytes:3808 (3.8 KB)
pan0 Link encap:Ethernet HWaddr 42:fe:cc:d1:d6:a9
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:4.153.65.134 P-t-P:209.244.16.217
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:526 (526.0 B) TX bytes:239 (239.0 B)
forrest@warden-Ubu-1:~$
I hope this information helps you.
Thanks
O
