Dear MArvin, Antonio, Aelmahmody
My wvdial.conf now looks like --->
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = 172222
Modem = /dev/ttySL0
Username = @#$#@$%$#
Carrier Check = no
Password = #@#$%^$
Baud = 460800
__________________________________________________
then i did -->
ankur@ankur:~$ grep -rsl slmodemd /etc/*
/etc/default/sl-modem-daemon
/etc/init.d/sl-modem-daemon
/etc/passwd
/etc/rc0.d/K12sl-modem-daemon
/etc/rc1.d/K12sl-modem-daemon
/etc/rc2.d/S12sl-modem-daemon
/etc/rc3.d/S12sl-modem-daemon
/etc/rc4.d/S12sl-modem-daemon
/etc/rc5.d/S12sl-modem-daemon
/etc/rc6.d/K12sl-modem-daemon
ankur@ankur:~$ sudo apt-get remove sl-modem-daemon
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package sl-modem-daemon is not installed, so not removed
The following packages were automatically installed and are no longer required:
libarts1c2a libartsc0 linux-headers-2.6.27-7 liboggz1 libmagick++10
linux-headers-2.6.28-11 ttf-kannada-fonts linux-headers-2.6.27-7-generic
amarok-common kdebase-workspace-libs4+5 libaccess-bridge-java librasqal0
python-serial libx264-59 linux-headers-2.6.28-11-generic python-qt4-dbus
ttf-telugu-fonts libpigment0.3-5 libtunepimp5 libifp4 libpackagekit8
libdvdread3 libffcall1 thunderbird-locale-ja ttf-oriya-fonts
gnustep-back-common ttf-bengali-fonts
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
ankur@ankur:~$
_______________________________________
after reboot
i did ifconfig; down eth0 & eth1
then sudo slmodemd -c INDIA --alsa hw:0,6 (with added space as told
by aelmahmoudy)
& after that did sudo wvdomem
ankur@ankur:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1b:38:a1:94:62
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19
eth1 Link encap:Ethernet HWaddr 00:21:00:27:6c:dc
inet6 addr: fe80::221:ff:fe27:6cdc/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:86 errors:0 dropped:0 overruns:0 frame:0
TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7158 (7.1 KB) TX bytes:7158 (7.1 KB)
ankur@ankur:~$ sudo ifconfig eth0 down
[sudo] password for ankur:
ankur@ankur:~$ sudo ifconfig eth1 down
ankur@ankur:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:94 errors:0 dropped:0 overruns:0 frame:0
TX packets:94 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7766 (7.7 KB) TX bytes:7766 (7.7 KB)
ankur@ankur:~$ sudo slmodemd -c INDIA --alsa hw:0,6
error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy
error: cannot setup device `hw:0,6'
ankur@ankur:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
OK
--> Modem initialized.
--> Sending: ATDT172222
--> Waiting for carrier.
ATDT172222
CONNECT 46667
--> Carrier detected. Waiting for prompt.
Welcome to UTStarcom Total Control HiPer ARC (TM)
Networks That Go The Distance (TM)
login:
--> Looks like a login prompt.
--> Sending: 2025464189
2025464189
Password:
--> Looks like a password prompt.
--> Sending: (password)
~[7f]}#@!}!}!} }?}!}$}%j}"}&[7f][7f][7f][7f]}%}&},Nvf}'}"}(}"}1}$}%j}3}#} ,w~
--> PPP negotiation detected.
--> Starting pppd at Sun Sep 20 13:37:53 2009
--> Pid of pppd: 4456
--> Using interface ppp0
--> pppd: �W� (`�
--> pppd: �W� (`�
--> pppd: �W� (`�
--> local IP address 61.2.59.110
--> pppd: �W� (`�
--> remote IP address 61.1.96.84
--> pppd: �W� (`�
--> primary DNS address 218.248.240.208
--> pppd: �W� (`�
--> secondary DNS address 218.248.240.135
--> pppd: �W� (`�
______________________________________________
then cursor kept blinking
so i thought there is successful connection
and opened firefox typed www.google.com
AND SOMEHOW IT IS DONE !!!!!!!!
sudo slmodemd -c INDIA --alsa hw:0,6 is still not showing success but
net is connected now.
THANK YOU ALL >>>>>
Realy feeling GR8 ......
Thank you ...
One more help pls .... tell me how to use Genome PPP
Or give me the steps which command i need to give next time ??? Do i
need to repeat all this stuff each time ????
Regards,
Ankur Joshi
(now online from dialup through UBUNTU ...)
On Sat, Sep 19, 2009 at 11:42 AM, أحمد المحمودي
<aelmahmoudy@xxxxxxxxxxxxxxxxxxxxx> wrote:
> On Fri, Sep 18, 2009 at 05:50:10PM -0400, Marvin Stodolsky wrote:
>> Then upon reboot, slmodemd setup will not be automatic, and
>> $ sudo slmodemd -c INDIA--alsa hw:0,6
>> should succeed
> ---end quoted text---
>
> I think there should be a space before --alsa:
>
> $ sudo slmodemd -c INDIA --alsa hw:0,6
>
> --
> أحمد المحمودي (Ahmed El-Mahmoudy)
> Digital design engineer
> GPG KeyID: 0xEDDDA1B7 (@ subkeys.pgp.net)
> GPG Fingerprint: 8206 A196 2084 7E6D 0DF8 B176 BC19 6A94 EDDD A1B7
>
