I was not trying to indicate that I was going to throw in the towel on
this. If I did, I apologize. I would definitely like (must) get this
modem going as it is the only internet connection available.
I did the modprobe commands you suggested both ways. When I executed
the link between AGS3 and modem, I get the message: "Creating symbolic
link 'dev/modem' to 'dev/ttyAGS3': File exists" (I don't know why I
did not notice that before). A list command shows /dev/modem linked to
ttyS0. Could that be the problem? Unfortunately, I am not expert
enough to know how to change the link on /dev/modem. Please provide the
necessary commands.
Either way, I tried the noacpi route. The results are the same.
Here is the output of dmesg:
---START---
Linux version 2.6.26.8.tex3 (cyril@localhost) (gcc version 4.1.1
20060724 (prerelease) (4.1.1-4pclos2007)) #1 SMP Mon Jan 12 04:33:38 CST
2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable)
BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS)
BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
0MB HIGHMEM available.
894MB LOWMEM available.
found SMP MP-table at [c00f3d80] 000f3d80
Entering add_active_range(0, 0, 229088) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229088
HighMem 229088 -> 229088
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 229088
On node 0 totalpages: 229088
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1758 pages used for memmap
Normal zone: 223234 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F81B0, 0014 (r0 ACRSYS)
ACPI: RSDT 37EE3000, 003C (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0)
ACPI: FACP 37EE3080, 0074 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0)
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero
address or length: 0000000000000000/1 [20080321]
ACPI: DSDT 37EE3100, 6E1B (r1 ACRSYS ACRPRDCT 1000 MSFT 3000000)
ACPI: FACS 37EE0000, 0040
ACPI: SSDT 37EEA000, 00D3 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 37EEA100, 0038 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 98)
ACPI: SLIC 37EEA140, 0176 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0)
ACPI: MCFG 37EEA2C0, 003C (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0)
ACPI: APIC 37EE9F40, 0098 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0)
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
SMP: Allowing 4 CPUs, 3 hotplug CPUs
PERCPU: Allocating 36552 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227298
Kernel command line: BOOT_IMAGE=linux
root=UUID=1e04c8a3-917e-4eb6-b799-231bbca729b2 acpi=on
resume=UUID=2eb778c2-1749-4ca1-9a98-f256fb7db67d splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1607.386 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901448k/916352k available (2305k kernel code, 14340k reserved,
805k data, 284k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ee0000 ( 894 MB)
.init : 0xc0411000 - 0xc0458000 ( 284 kB)
.data : 0xc0340749 - 0xc0409d00 ( 805 kB)
.text : 0xc0100000 - 0xc0340749 (2305 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 3218.10 BogoMIPS
(lpj=6436207)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
Freeing initrd memory: 2458k freed
ACPI: Core revision 20080321
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) Processor 2650e stepping 02
Brought up 1 CPUs
Total of 1 processors activated (3218.10 BogoMIPS).
net_namespace: 660 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x295-0x314 has been reserved
system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved
system 00:0b: iomem range 0x37ee0000-0x37efffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x37edffff could not be reserved
system 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
Switched to high resolution mode on CPU 0
PCI: Bridge: 0000:00:04.0
IO window: b000-bfff
MEM window: 0xfd800000-0xfd8fffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1238935676.392:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0d.0: Boot video device
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
Allocate Port Service[0000:00:09.0:pcie03]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3750k,
total 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d560
vesafb: pmi: set display start = c00cd596, set palette = c00cd600
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803
c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
29454 bytes,<6>...found (800x600, 29406 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfeff0000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot
0000:00:06.0
NFORCE-MCP61: not 100% native mode: will probe irqs later
NFORCE-MCP61: IDE port disabled
ide0: BM-DMA at 0xf000-0xf007
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 1.00
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 284k freed
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level,
low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level,
low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
usb 1-8: new high speed USB device using ehci_hcd and address 2
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
libata version 3.00 loaded.
usb 1-8: configuration #1 chosen from 1 choice
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level,
low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDP725016GLA380, GMBOA52A, max UDMA/133
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72501 GMBO PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [APSJ] -> GSI 23 (level,
low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:08.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0
ANSI: 0 CCS
sd 4:0:0:0: [sdb] Attached SCSI removable disk
scsi 4:0:0:1: Direct-Access Generic- SM/xD/SD/MMC/MS 1.00 PQ: 0
ANSI: 0 CCS
sd 4:0:0:1: [sdc] Attached SCSI removable disk
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: Expecting a [Reference] package element, found type 0
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (34 C)
ACPI: WMI: Mapper loaded
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
ACPI: PNP0C0B:00 is registered as cooling_device1
ACPI: Fan [FAN] (on)
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 20 (level,
low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:07.0 to 64
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x5043 @ 1, addr
00:1d:72:b2:d2:d4
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level,
low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:05.0 to 64
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13
(usb?)
floppy0: no floppy controllers found
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Linux agpgart interface v0.103
powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu
cores) (version 2.20.00)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13
(usb?)
floppy0: no floppy controllers found
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@xxxxxxxxxx
EXT3 FS on sda1, internal journal
loop: module loaded
Adding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
29454 bytes,<6>...found (800x600, 29406 bytes, v3).
bootsplash: status on console 0 changed to on
nf_conntrack version 0.5.0 (14336 buckets, 57344 max)
NET: Registered protocol family 17
eth0: no link during initialization.
fuse init (API version 7.9)
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600,
3179 bytes, v3).
bootsplash: status on console 5 changed to on
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 21 (level,
low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08
PST 2009
PPP generic driver version 2.4.2
agrsm: created 0 infos
Loading module Agere Modem Controller driver version 2.1.60.0.Linspire
(2005-11-16)
ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem
agrserial: Loading module Agere Modem Interface driver version
2.1.60.0.Linspire (2005-11-16)
BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<fc22bd43>] :agrmodem:LXSoftModemStart+0x23/0x230
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in: agrserial agrmodem(P) ppp_async ppp_generic slhc
crc_ccitt nvidia(P) fuse af_packet video output sbs sbshc container
battery ac binfmt_misc loop dm_mirror dm_log dm_mod cpufreq_ondemand
cpufreq_conservative cpufreq_powersave powernow_k8 freq_table amd64_agp
agpgart mmc_block sdhci mmc_core 8250_pci ohci1394 ieee1394 bttv
videodev v4l1_compat firmware_class ir_common compat_ioctl32
i2c_algo_bit v4l2_common videobuf_dma_sg videobuf_core btcx_risc
tveeprom yenta_socket rsrc_nonstatic pcmcia_core rtc_cmos rtc_core
rtc_lib k8temp hwmon snd_hda_intel snd_hwdep sr_mod cdrom forcedeth
snd_seq_dummy fan sg snd_seq_oss snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc
snd_mixer_oss snd soundcore wmi thermal button processor i2c_nforce2
i2c_core evdev usb_storage pata_amd sata_nv libata sd_mod scsi_mod ext3
jbd uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: nf_conntrack]
Pid: 4594, comm: wvdialconf Tainted: P (2.6.26.8.tex3 #1)
EIP: 0060:[<fc22bd43>] EFLAGS: 00210286 CPU: 0
EIP is at LXSoftModemStart+0x23/0x230 [agrmodem]
EAX: 00000008 EBX: f9218a94 ECX: 00000003 EDX: f9218560
ESI: 00000000 EDI: f0b9ac78 EBP: eb53bde8 ESP: eb53bd60
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process wvdialconf (pid: 4594, ti=eb53a000 task=f6deabd0 task.ti=eb53a000)
Stack: eb4d0e40 00000008 fc26680b c16173b8 c16173c0 c01641af 00000001
00000044
f0b9d000 c03e9440 00000001 00000000 00000000 000280d0 00200256
00000000
00000001 00000000 00000001 00000000 00000001 c03ea284 c03e9440
c03e9440
Call Trace:
[<c01641af>] get_page_from_freelist+0x28f/0x470
[<c01645ac>] __alloc_pages_internal+0x9c/0x420
[<fc227316>] linux_modem_open+0x26/0x110 [agrmodem]
[<fc181395>] modemPortOpen+0x5/0x10 [agrmodem]
[<f9216b35>] serial8250_startup+0x195/0x270 [agrserial]
[<c027a3a9>] uart_startup+0x49/0x140
[<c027be1c>] uart_open+0xcc/0x400
[<c0264464>] check_tty_count+0x14/0xb0
[<c021139f>] kobject_get+0xf/0x20
[<c027bd50>] uart_open+0x0/0x400
[<c026840b>] tty_open+0x14b/0x2e0
[<c02682c0>] tty_open+0x0/0x2e0
[<c0183232>] chrdev_open+0xa2/0x180
[<c017e679>] __dentry_open+0xb9/0x240
[<c017e847>] nameidata_to_filp+0x47/0x60
[<c0183190>] chrdev_open+0x0/0x180
[<c018b583>] do_filp_open+0x183/0x790
[<c0137fd0>] autoremove_wake_function+0x0/0x50
[<f8860b9d>] ext3_discard_reservation+0x6d/0x70 [ext3]
[<c017e39f>] get_unused_fd_flags+0x4f/0xc0
[<c018923a>] getname+0x9a/0xf0
[<c017e45c>] do_sys_open+0x4c/0xe0
[<c017e56c>] sys_open+0x2c/0x40
[<c0103b91>] sysenter_past_esp+0x6a/0x91
=======================
Code: 00 89 d8 eb a7 8d 76 00 55 b8 0b 68 26 fc 89 e5 57 56 53 83 ec 7c
8b 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 <8b> 46
04 89 04 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00
EIP: [<fc22bd43>] LXSoftModemStart+0x23/0x230 [agrmodem] SS:ESP
0068:eb53bd60
---[ end trace 67e696a1185daac9 ]---
===END OF dmeg OUTPUT===
Here is the output of lsmod:
===START===
Module Size Used by
agrserial 11088 2
agrmodem 1184932 1 agrserial
ppp_async 8544 0
ppp_generic 22780 1 ppp_async
slhc 6112 1 ppp_generic
crc_ccitt 2144 1 ppp_async
nvidia 7217048 26
fuse 48956 1
af_packet 16192 0
video 16560 0
output 3104 1 video
sbs 11208 0
sbshc 5280 1 sbs
container 3488 0
battery 10308 0
ac 4292 0
binfmt_misc 8488 1
loop 14188 0
dm_mirror 17216 0
dm_log 9604 1 dm_mirror
dm_mod 49668 2 dm_mirror,dm_log
cpufreq_ondemand 7020 0
cpufreq_conservative 6472 0
cpufreq_powersave 1952 0
powernow_k8 13188 0
freq_table 4576 2 cpufreq_ondemand,powernow_k8
amd64_agp 9540 0
agpgart 31560 2 nvidia,amd64_agp
mmc_block 9796 0
sdhci 14788 0
mmc_core 43420 2 mmc_block,sdhci
8250_pci 23776 0
ohci1394 29360 0
ieee1394 84728 1 ohci1394
bttv 160404 0
videodev 30240 1 bttv
v4l1_compat 14404 1 videodev
firmware_class 7296 1 bttv
ir_common 40196 1 bttv
compat_ioctl32 1344 1 bttv
i2c_algo_bit 6020 1 bttv
v4l2_common 11392 1 bttv
videobuf_dma_sg 11812 1 bttv
videobuf_core 17284 2 bttv,videobuf_dma_sg
btcx_risc 4648 1 bttv
tveeprom 12260 1 bttv
yenta_socket 22956 0
rsrc_nonstatic 11616 1 yenta_socket
pcmcia_core 35764 2 yenta_socket,rsrc_nonstatic
rtc_cmos 9376 0
rtc_core 14620 1 rtc_cmos
rtc_lib 3104 1 rtc_core
k8temp 4288 0
hwmon 2716 1 k8temp
snd_hda_intel 360684 1
snd_hwdep 6980 1 snd_hda_intel
sr_mod 15236 0
cdrom 34560 1 sr_mod
forcedeth 49840 0
snd_seq_dummy 2852 0
fan 4260 0
sg 30260 0
snd_seq_oss 29024 0
snd_seq_midi_event 7104 1 snd_seq_oss
snd_seq 48240 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 7212 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 36800 0
snd_pcm 70660 2 snd_hda_intel,snd_pcm_oss
snd_timer 20168 2 snd_seq,snd_pcm
snd_page_alloc 8456 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14048 1 snd_pcm_oss
snd 51812 11
snd_hda_intel,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 7072 1 snd
wmi 6568 0
thermal 15260 0
button 6224 0
processor 32544 2 powernow_k8,thermal
i2c_nforce2 6208 0
i2c_core 22196 6
nvidia,bttv,i2c_algo_bit,v4l2_common,tveeprom,i2c_nforce2
evdev 9056 3
usb_storage 83968 0
pata_amd 10532 0
sata_nv 21864 2
libata 159040 2 pata_amd,sata_nv
sd_mod 25752 3
scsi_mod 141228 5 sr_mod,sg,usb_storage,libata,sd_mod
ext3 120552 1
jbd 41940 1 ext3
uhci_hcd 21260 0
ohci_hcd 20996 0
ehci_hcd 32492 0
usbcore 129328 5 usb_storage,uhci_hcd,ohci_hcd,ehci_hcd
===END OF lsmod OUTPUT===
Antonio Olivares wrote:
Martin,
working with these types of modems can be a pain, but before you give
up, throw the towel please do the following.
when you do a
# modprobe agrserial
# modprobe agrmodem
or the other way around?
# modprobe agrmodem
# modprobe agrserial
then you may run the agrsm-test:(oops that is for 11c11040 :(
driver(s)). Anyhow you may make symbolic links
# ln -s /dev/ttyAGS3 /dev/ttySAGR
# ln -s /dev/ttyAGS3 /dev/modem
if a failure by wvdialconf to find the modem port occurs again, edit
the grub.conf file and add the option "pci=noacpi"
Also if none of the above advice worked, please attach what you did,
copy and paste to this message also please add the output of dmesg
and/or lsmod so that we can see if the modules were loaded or not.
Regards,
Antonio
http://linmodems.technion.ac.il/packages/ltmodem/sv92/agrsm_howto.txt
On Sun, Apr 5, 2009 at 9:37 AM, Martin Lupcke
<mossianin_lbcmi@xxxxxxxxxx> wrote:
I followed the instructions in the "agrsm_howto.txt" file. It appears that
it did not work.
The first indication was that the "modprobe agrserial" command did not
return the creation of ttyAGS3. It simply came back to the prompt. The
wvdialconf command came back simply saying that no modem was found. I did
try the two remedied described, but no luck.
I even went so far as to re-install Linux from scratch in case some of my
earlier attempts messed something up. The results are the same as I
describe above.
Let me know if there is something else I should try. Please be fairly
detailed as I am a relative newbie to Linux (about a year old).
Thanks.
Marvin Stodolsky wrote:
Martin,
Try the attached. Report back to the List, not me directly:
Jacques,
Please put into the
http://linmodems.technion.ac.il/packages/ltmodem/sv92/ folder. It
just differs by recognition of PCI_ID 11c1:0630
MarvS
On Fri, Apr 3, 2009 at 11:53 PM, Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx> wrote:
Antomio reported Microsoft diagnostics:
Modem type: Agere Systems PCI-SV92EX Soft Modem
pci\ven_11c1&dev_0630&subsys_063011c1
which lines translates in Linux format:
PCI_ID 11c1:0630
which shows that it is in the Agere Systems PCI-SV92 family,
i.e., a type which might be supported by the current agrsm code.
More tomorrow.
MarvS
On Fri, Apr 3, 2009 at 7:52 PM, Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx> wrote:
Martin,
Communication controller: Agere Systems Device 0630 "
CLASS=0780 , PCIDEV=11c1:0630
is a modem we haven't encountered before under Linux.
There is service for a 11c1:0630 chipset modem through a agrsm
package, for compiling an agrmodem+agrserial driver pair.
I'll add 11c1:0630 to the agrsm recognition codes and sent it to you,
tonight or tomorrow.
MarvS
On Fri, Apr 3, 2009 at 6:32 PM, Martin Lupcke
<mossianin_lbcmi@xxxxxxxxxx> wrote:
I recently purchased an EMachines model EL1200. It has a modem in it
that I
am trying to get running because it is the only means of connecting to
the
internet. The modem itself has an LSI label on the front with and
Anatel
label on the back. There does not appear to any other obvious
labelling.
I have tried several things including using the Windows drivers from
the
EMachines website with ndiswrapper (I did not have the presence of
mind to
try to get the Windows information before I wiped the drive.) I have
searched the archives for the PCIID that appears for this modem. I did
find
a similar ID (11c10480, I believe) but that did not work. All to no
avail.
Below is the output from scanModem's ModemData.txt file. Any
assistance you
can offer to get this modem working would be appreciated.
Thanks.
===Begin ModemData.txt===
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry PCLinuxOS release 2009 (PCLinuxOS) for
i586
Kernel 2.6.26.8.tex3 on an i686 / kernel 2.6.26.8.tex3
With this Subject Line cogent experts will be alerted, and useful case
names
left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup
service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet
Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, PCLinuxOS release 2009 (PCLinuxOS) for i586
Kernel 2.6.26.8.tex3 on an i686 /
Linux version 2.6.26.8.tex3 (cyril@localhost) (gcc version 4.1.1
20060724
(prerelease) (4.1.1-4pclos2007)) #1 SMP Mon Jan 12 04:33:38 CST 2009
scanModem update of: 2009_02_21
The modem symbolic link is /dev/modem -> ttyS0
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0bc2:0888 Seagate RSS LLC
ID 0bda:0151 Realtek Semiconductor Corp. Mass Stroage Device
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 03:00.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
03:00.0 11c1:0630 11c1:0630 Communication controller: Agere
Systems
Device 0630
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 03:00.0 ----
For candidate card in slot 00:05.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 10de:03f0 1025:0153 Audio device: nVidia Corporation
MCP61
High Definition Audio
Modem interrupt assignment and sharing:
22: 8522 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level,
low) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:05.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1
00-04: ALC888 Analog : ALC888 Analog : capture 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe024000 irq 22
PCI slot 00:05.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent
software.
===
A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio
(rev
a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev
a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev
a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6150SE
nForce
430 (rev a2)
03:00.0 Communication controller: Agere Systems Device 0630 (rev 01)
------------------------------------------------
with USB and bridge devices not displayed.
If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
gedit /etc/wvdial.conf
will be able to dial out with Root permission:
wvdial
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information
available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) >
System
Hardware > Device Manager > Modems > Click on the + > Modem. Double
click
to
expand the graphic. Manufacturer information may be displayed. For
example,
CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID
or
vendor
and device information. From the Driver Details TAB, copy out the
VENdor and
DEVice information.
Next do the Query Modem and record the ATI specifications displayed
such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Predictive diagnostics for card in bus 00:05.0:
Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1025:0153
IRQ=22
HDA=10de:03f0
SOFT=10de:03f0.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their
Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 10de:03f0.
If another modem card is present, then most likely 10de:03f0 does not
host a
modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware)
type.
Try detection with Root permission:
wvdialconf /etc/wvdial.conf
For candidate modem in: 00:05.0
0403 Audio device: nVidia Corporation MCP61 High Definition Audio
Primary device ID: 10de:03f0
Subsystem PCI_id 1025:0153
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive
alternatives:
1) The hsfmodem software for Conexant chipset modems: Read
DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for
details,
and
to test get the package SLMODEMD.gcc4.1.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source
package
with full speed enabled is available, but requires driver compiling.
Read
DOCs/Conexant.txt
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
find
the
hsfmodem package matching your System. For several Linux distros, there
are
precompiled drivers matched to specific kernels. These have within the
FileName,
your KernelVersion: 2.6.26.8.tex3
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be
used.
Downloaded packages must be moved into the Linux partition (home folder
is
OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may
require
installation of additional packages, one of the alsa-driver-linuxant
packages
on http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed.
During the
hsfmodem install, there will be a message if there is necessary
installation
of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm
permission:
alsa* -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this
case the
Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev.
Package
names may be different for other Linuxes. If not on your install CD,
these
packages can be searched for at http://packages.ubuntu.com. After
download,
they can be coinstalled with:
dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case
get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
wvdialconf /etc/wvdial.conf
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides
compiling
support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 03:00.0:
Modem chipset not detected on
NAME="Communication controller: Agere Systems Device 0630 "
CLASS=0780
PCIDEV=11c1:0630
SUBSYS=11c1:0630
IRQ=10
For candidate modem in: 03:00.0
0780 Communication controller: Agere Systems Device 0630
Primary device ID: 11c1:0630
Support type needed or chipset:
----------------end Softmodem section --------------
scanModem could not identify the Support Type needed from diagnosics or
archives.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) >
System
Hardware > Device Manager > Modems > Click on the + > Modem. Double
click
to
expand the graphic. Manufacturer information may be displayed. For
example,
CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID
or
vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed
such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.26.8.tex3/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The
minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-t 1 root root 304536 Nov 6 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
noauth
noipdefault
usepeerdns
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting
be necessary.
==========================================================
L modem ttyS0
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 5 Apr 3 17:49
/dev/modem -> ttyS0
slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files:
/etc/udev/devices.d/modem.nodes:L modem ttyS0
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
