> Is there anything about it on Linux?Sorry, but no 2008/12/1 王伟超 <derek_maxport@xxxxxxxxxxx>:> Dear Marvin,>> Good day to you!>> I just noticed that my PCMCIA CDMA Card uses 0X16C95x serial device driver.>> Is there anything about it on Linux? I tried to search it for different> sites but came out with no satisfying result.>> Pls kindly check and let me know.>> Thanks and best regards> Derek>>> Date: Sun, 23 Nov 2008 11:16:01 -0500>> From: marvin.stodolsky@xxxxxxxxx>> To: derek_maxport@xxxxxxxxxxx>> Subject: Re: PCMCIA CDMA Card DETAILS>> CC: discuss@xxxxxxxxxxxxx>>>> derek>>>> The critical information included in your files is that your PCMCIA>> modem is a PC-CDMA chipset type. Please Google seach for>> " PC-CDMA Linux">> " PC-CDMA Linux drivers">> and report any useful URLs.>>>> MarvS>>>> 2008/11/23 王伟超 <derek_maxport@xxxxxxxxxxx>:>> > Hi Marvin,>> >>> > I tried to get some info under Windows for my modem, but failed.>> >>> > Attached are drivers I got from the Windows.But I donot know if it can>> > be of>> > any help for you to know more about the card.>> >>> > Thanks and best regards>> > Derek>> >>> >> Date: Sun, 23 Nov 2008 00:03:34 -0500>> >> From: marvin.stodolsky@xxxxxxxxx>> >> To: derek_maxport@xxxxxxxxxxx>> >> Subject: Re: PCMCIA CDMA Card Problem>> >> CC: discuss@xxxxxxxxxxxxx>> >>>> >> Derek,>> >>>> >> From the tests on the PCMCIA card, it does not appear to be>> >> supportable by the Linux serial drivers. If you can do Diagnostics as>> >> described in Softmodem.txt under MicroSoft, that might be informative.>> >>>> >> MarvS>> >>>> >> 2008/11/22 王伟超 <derek_maxport@xxxxxxxxxxx>:>> >> > Dear Marvin,>> >> >>> >> > Thanks for your kind mail!>> >> >>> >> > I did as requested and I put the result in the following:>> >> >>> >> >>> >> > root@ubuntu:~# sudo ifconfig eth0 down>> >> >>> >> > root@ubuntu:~# sudo modprobe -r snd-intel8x0m>> >> >>> >> > root@ubuntu:~# tail -f /var/log/messages &>> >> >>> >> > [1] 6174>> >> >>> >> > root@ubuntu:~# Nov 23 00:09:47 ubuntu kernel: [ 149.226672] type=1503>> >> > audit(1227370187.707:6): operation="socket_create" family="ax25">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226700] type=1503>> >> > audit(1227370187.707:7): operation="socket_create" family="netrom">> >> > sock_type="seqpacket" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226712] type=1503>> >> > audit(1227370187.707:8): operation="socket_create" family="rose">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226724] type=1503>> >> > audit(1227370187.707:9): operation="socket_create" family="ipx">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226736] type=1503>> >> > audit(1227370187.707:10): operation="socket_create">> >> > family="appletalk">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226748] type=1503>> >> > audit(1227370187.707:11): operation="socket_create" family="econet">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226760] type=1503>> >> > audit(1227370187.707:12): operation="socket_create" family="ash">> >> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.226771] type=1503>> >> > audit(1227370187.707:13): operation="socket_create" family="x25">> >> > sock_type="seqpacket" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:09:47 ubuntu kernel: [ 149.245559] type=1503>> >> > audit(1227370187.727:14): operation="inode_permission">> >> > requested_mask="::r">> >> > denied_mask="::r" fsuid=7 name="/proc/5469/net/dev" pid=5469>> >> > profile="/usr/sbin/cupsd">> >> >>> >> > Nov 23 00:14:00 ubuntu syslogd 1.5.0#2ubuntu6: restart.>> >> >>> >> > Nov 23 00:24:40 ubuntu kernel: [ 1042.213084] pccard: card ejected>> >> > from>> >> > slot>> >> > 0>> >> >>> >> > Nov 23 00:25:12 ubuntu kernel: [ 1073.536069] pccard: PCMCIA card>> >> > inserted>> >> > into slot 0>> >> >>> >> > Nov 23 00:25:12 ubuntu kernel: [ 1073.538229] pcmcia: registering new>> >> > device>> >> > pcmcia0.0>> >> >>> >> > Nov 23 00:25:12 ubuntu kernel: [ 1073.587579] 0.0: ttyS0 at I/O 0x3f8>> >> > (irq =>> >> > 3) is a 8250>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > root@ubuntu:~# sudo wvdialconf wvtest>> >> >>> >> > Editing `wvtest'.>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > Scanning your serial ports for a modem.>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > Modem Port Scan<*1>: Scanning ttyS0 first, /dev/modem is a link to>> >> > it.>> >> >>> >> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud>> >> >>> >> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud>> >> >>> >> > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.>> >> >>> >> > Modem Port Scan<*1>: S1 S2 S3>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > Sorry, no modem was detected! Is it in use by another program?>> >> >>> >> > Did you configure it properly with setserial?>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > Please read the FAQ at http://open.nit.ca/wiki/?WvDial>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# dmesg | grep tty>> >> >>> >> > [ 0.004000] console [tty0] enabled>> >> >>> >> > [ 21.544543] 0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 8250>> >> >>> >> > [ 1073.587579] 0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 8250>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# pccardctl ident>> >> >>> >> > Socket 0:>> >> >>> >> > product info: "HighSpeed", "CDMA", "", "">> >> >>> >> > manfid: 0x0279, 0x950b>> >> >>> >> > function: 2 (serial)>> >> >>> >> > Socket 1:>> >> >>> >> > no product info available>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# pccardctl ident>> >> >>> >> > Socket 0:>> >> >>> >> > product info: "HighSpeed", "CDMA", "", "">> >> >>> >> > manfid: 0x0279, 0x950b>> >> >>> >> > function: 2 (serial)>> >> >>> >> > Socket 1:>> >> >>> >> > no product info available>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# pccardctl status>> >> >>> >> > Socket 0:>> >> >>> >> > 5.0V 16-bit PC Card>> >> >>> >> > Subdevice 0 (function 0) bound to driver "serial_cs">> >> >>> >> > Socket 1:>> >> >>> >> > no card>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# pccardctl info>> >> >>> >> > PRODID_1="HighSpeed">> >> >>> >> > PRODID_2="CDMA">> >> >>> >> > PRODID_3="">> >> >>> >> > PRODID_4="">> >> >>> >> > MANFID=0279,950b>> >> >>> >> > FUNCID=2>> >> >>> >> > PRODID_1="">> >> >>> >> > PRODID_2="">> >> >>> >> > PRODID_3="">> >> >>> >> > PRODID_4="">> >> >>> >> > MANFID=0000,0000>> >> >>> >> > FUNCID=255>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# ln -sf /dev/ttyS0 /dev/modem>> >> >>> >> > root@ubuntu:~# gedit /etc/wvdial.conf>> >> >>> >> > [Modem0]>> >> >>> >> > Modem = /dev/modem>> >> >>> >> > Baud = 230400>> >> >>> >> > SetVolume = 1>> >> >>> >> > Dial Command = ATDT>> >> >>> >> > Dial-AT-OK ATDT Command =>> >> >>> >> > Init1 = ATZ>> >> >>> >> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >>> >> > FlowControl = Hardware (CRTSCTS)>> >> >>> >> > New PPPD = yes>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > [Dialer Defaults]>> >> >>> >> > Username = CARD>> >> >>> >> > Password = CARD>> >> >>> >> > Phone = #777>> >> >>> >> > Stupid Mode = 1>> >> >>> >> > Inherits = Modem0>> >> >>> >> > Carrier check = no>> >> >>> >> >>> >> >>> >> > root@ubuntu:~# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > --> Sending: ATQ0>> >> >>> >> > --> Re-Sending: ATZ>> >> >>> >> > --> Modem not responding.>> >> >>> >> >>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 -a>> >> >>> >> > /dev/ttyS0, Line 0, UART: 8250, Port: 0x03f8, IRQ: 3>> >> >>> >> > Baud_base: 115200, close_delay: 50, divisor: 0>> >> >>> >> > closing_wait: none>> >> >>> >> > Flags: spd_normal skip_test>> >> >>> >> >>> >> >>> >> >>> >> >>> >> > root@ubuntu:~#>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 baud_base 230400>> >> >>> >> > root@ubuntu:~# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > --> Sending: ATQ0>> >> >>> >> > --> Re-Sending: ATZ>> >> >>> >> > --> Modem not responding.>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 closing_wait 3000>> >> >>> >> > root@ubuntu:~# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > --> Sending: ATQ0>> >> >>> >> > --> Re-Sending: ATZ>> >> >>> >> > --> Modem not responding.>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 closing_wait 3000>> >> >>> >> > root@ubuntu:~# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > --> Sending: ATQ0>> >> >>> >> > --> Re-Sending: ATZ>> >> >>> >> > --> Modem not responding.>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 irq 4>> >> >>> >> > root@ubuntu:~# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > --> Sending: ATQ0>> >> >>> >> > --> Re-Sending: ATZ>> >> >>> >> > --> Modem not responding.>> >> >>> >> > root@ubuntu:~# setserial /dev/ttyS0 -a>> >> >>> >> > /dev/ttyS0, Line 0, UART: 8250, Port: 0x03f8, IRQ: 4>> >> >>> >> > Baud_base: 230400, close_delay: 50, divisor: 0>> >> >>> >> > closing_wait: none>> >> >>> >> > Flags: spd_normal skip_test>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >> Date: Sat, 22 Nov 2008 08:59:22 -0500>> >> >> From: marvin.stodolsky@xxxxxxxxx>> >> >> To: derek_maxport@xxxxxxxxxxx; discuss@xxxxxxxxxxxxx>> >> >> Subject: Re: ModemData.txt>> >> >>>> >> >> Derek,>> >> >>>> >> >> Please send to the List, not directly to me, as I'm not online much.>> >> >> Below is a typical wvdial.conf for usage with slmodemd serviced>> >> >> modems. Compare with yours.>> >> >>>> >> >> With respect to the PCMCIA card, I don't recognize Manufacture 0279.>> >> >> RE: Modem interrupt assignment and sharing:>> >> >> 11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2,>> >> >> yenta, yenta, Intel 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Model>> >> >> T-------->> >> >> Try freeing up resources with by detaching all USB devices.>> >> >> # sudo ifconfig eth0 down>> >> >> # sudo modprobe -r snd-intel*x0m>> >> >>>> >> >> Watch kernel messages with:>> >> >> $ sudo tail -f /var/log/messages &>> >> >> Remove the PCMCIA card. Wait a few seconds and put it back in. Some>> >> >> chipset identifiers may be output.>> >> >>>> >> >> Also see if the card may now be detected with:>> >> >> $ sudo wvdialconf wvtest>> >> >>>> >> >> MarvS>> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> >> [Dialer defaults]>> >> >> # are comment lines>> >> >> Modem = /dev/ttySL0>> >> >> Baud = 115200>> >> >> Init1 = ATZ>> >> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >> ## for noisy lines try instead>> >> >> # Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34>> >> >> ISDN = 0>> >> >> Modem Type = Analog Modem>> >> >> Phone = 3015560020>> >> >> Username = LoginName@xxxxxxxxxxxxxxxx>> >> >> Password = LoginPassword>> >> >> # needed for /dev/pts/N type ports>> >> >> Carrier Check = no>> >> >>>> >> >>>> >> >>>> >> >> 2008/11/22 王伟超 <derek_maxport@xxxxxxxxxxx>:>> >> >> > Hello Marvin,>> >> >> >>> >> >> > Thanks for your help!>> >> >> >>> >> >> > Under your help, I came out with some result when doing wvdial.>> >> >> >>> >> >> >>> >> >> > root@ubuntu:/#>> >> >> >>> >> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3# gedit /etc/wvdial.conf>> >> >> >>> >> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3# wvdial>> >> >> >>> >> >> > --> WvDial: Internet dialer version 1.60>> >> >> >>> >> >> > --> Cannot get information for serial port.>> >> >> >>> >> >> > --> Initializing modem.>> >> >> >>> >> >> > --> Sending: ATZ>> >> >> >>> >> >> > ATZ>> >> >> >>> >> >> > OK>> >> >> >>> >> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >> >>> >> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >> >>> >> >> > OK>> >> >> >>> >> >> > --> Modem initialized.>> >> >> >>> >> >> > --> Idle Seconds = 300, disabling automatic reconnect.>> >> >> >>> >> >> > --> Sending: ATDT#777>> >> >> >>> >> >> > --> Waiting for carrier.>> >> >> >>> >> >> > ATDT#777>> >> >> >>> >> >> > NO DIALTONE>> >> >> >>> >> >> > --> No dial tone.>> >> >> >>> >> >> > --> Disconnecting at Sat Nov 22 13:05:22 2008>> >> >> >>> >> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3#>> >> >> >>> >> >> >>> >> >> >>> >> >> > Pls kindly help me out with this problem.>> >> >> >>> >> >> > One more thing to be concerned:>> >> >> >>> >> >> > I got a PCMCIA card available on my Ubuntu. I used pccardctl>> >> >> > indent,>> >> >> > it>> >> >> > shows something about the card. But when I do wvdialconf. It>> >> >> > cannot>> >> >> > detect>> >> >> > the modem. When I open a new consule, it says "too much work for>> >> >> > irq>> >> >> > 3".>> >> >> > This PCMCIA card is inserted in slot 0. Manfid 0x0279,0x950b. When>> >> >> > using>> >> >> > setserial, it shows irq 3. I guess if I allocate a right irq port>> >> >> > for>> >> >> > it, it>> >> >> > can work out. But I have no idea about it.>> >> >> >>> >> >> > Pls kindly check and inform.>> >> >> >>> >> >> > Thanks and best regards>> >> >> > Derek>> >> >> >>> >> >> >>> >> >> >> Date: Fri, 21 Nov 2008 22:00:24 -0500>> >> >> >> From: marvin.stodolsky@xxxxxxxxx>> >> >> >> To: derek.king.wang@xxxxxxxxx>> >> >> >> Subject: Re: ModemData.txt>> >> >> >> CC: discuss@xxxxxxxxxxxxx>> >> >> >>>> >> >> >> Antonio>> >> >> >>>> >> >> >> The modem does get activated at the end:>> >> >> >> [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B ->>> >> >> >> Link[LNKB]>> >> >> >> -> GSI 11 (level, low) -> IRQ 11>> >> >> >> [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency>> >> >> >> timer>> >> >> >> to>> >> >> >> 64>> >> >> >> ------------>> >> >> >> as the rest of the diagnostics show.>> >> >> >>>> >> >> >> King,>> >> >> >> It is an intermal Winmodem that is being detected not your PCMCIA>> >> >> >> modem.>> >> >> >> It you want to use the PCMCIA, do diagnostics under Microsoft to>> >> >> >> identify its chipset.>> >> >> >>>> >> >> >> Incidentally, the modem driver snd-intel8x0m occassionally dies>> >> >> >> when>> >> >> >> loaded. It can be reactivated by unloading and reloading.>> >> >> >>>> >> >> >> $ sudo modprobe -r snd-intel8x0m>> >> >> >> $ sudo modprobe snd-intel8x0m>> >> >> >>>> >> >> >> MarvS>> >> >> >>>> >> >> >>>> >> >> >> On Fri, Nov 21, 2008 at 9:41 PM, Antonio Olivares>> >> >> >> <olivares14031@xxxxxxxxx> wrote:>> >> >> >> > King,>> >> >> >> >>> >> >> >> > There's a problem here:>> >> >> >> >>> >> >> >> > Modem Interrupt and sharing :(>> >> >> >> >>> >> >> >> > Modem interrupt assignment and sharing:>> >> >> >> > 11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta,>> >> >> >> > Intel>> >> >> >> > 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Modem>> >> >> >> > --- Bootup diagnostics for card in PCI slot 00:1f.6 ---->> >> >> >> > [ 0.622948] PCI: 0000:00:1f.6 reg 10 io port: [0, ff]>> >> >> >> > [ 0.622958] PCI: 0000:00:1f.6 reg 14 io port: [0, 7f]>> >> >> >> > [ 0.635517] pnp 00:08: io resource (0x10-0x1f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635522] pnp 00:08: io resource (0x24-0x25) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635527] pnp 00:08: io resource (0x28-0x29) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635532] pnp 00:08: io resource (0x2c-0x2d) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635537] pnp 00:08: io resource (0x2e-0x2f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635542] pnp 00:08: io resource (0x30-0x31) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635547] pnp 00:08: io resource (0x34-0x35) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635552] pnp 00:08: io resource (0x38-0x39) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635557] pnp 00:08: io resource (0x3c-0x3d) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635562] pnp 00:08: io resource (0x4e-0x4f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635567] pnp 00:08: io resource (0x50-0x53) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635572] pnp 00:08: io resource (0x62-0x63) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635577] pnp 00:08: io resource (0x65-0x65) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635582] pnp 00:08: io resource (0x66-0x66) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635587] pnp 00:08: io resource (0x72-0x77) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635592] pnp 00:08: io resource (0x80-0x80) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635597] pnp 00:08: io resource (0x84-0x86) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635602] pnp 00:08: io resource (0x88-0x88) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635607] pnp 00:08: io resource (0x8c-0x8e) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635612] pnp 00:08: io resource (0x90-0x9f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635617] pnp 00:08: io resource (0xa4-0xa5) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635622] pnp 00:08: io resource (0xa8-0xa9) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635627] pnp 00:08: io resource (0xac-0xad) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635632] pnp 00:08: io resource (0xb0-0xb5) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635637] pnp 00:08: io resource (0xb8-0xb9) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635642] pnp 00:08: io resource (0xbc-0xbd) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635648] pnp 00:08: io resource (0xe0-0xef) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 0 (0x0-0xff), disabling>> >> >> >> > [ 0.635658] pnp 00:08: io resource (0x10-0x1f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635663] pnp 00:08: io resource (0x24-0x25) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635668] pnp 00:08: io resource (0x28-0x29) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635673] pnp 00:08: io resource (0x2c-0x2d) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635678] pnp 00:08: io resource (0x2e-0x2f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635683] pnp 00:08: io resource (0x30-0x31) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635688] pnp 00:08: io resource (0x34-0x35) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635693] pnp 00:08: io resource (0x38-0x39) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635698] pnp 00:08: io resource (0x3c-0x3d) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635703] pnp 00:08: io resource (0x4e-0x4f) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635708] pnp 00:08: io resource (0x50-0x53) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635713] pnp 00:08: io resource (0x62-0x63) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635718] pnp 00:08: io resource (0x65-0x65) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635723] pnp 00:08: io resource (0x66-0x66) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 0.635728] pnp 00:08: io resource (0x72-0x77) overlaps>> >> >> >> > 0000:00:1f.6>> >> >> >> > BAR>> >> >> >> > 1 (0x0-0x7f), disabling>> >> >> >> > [ 2.399054] serial 0000:00:1f.6: power state changed by ACPI to>> >> >> >> > D0>> >> >> >> > [ 2.399067] serial 0000:00:1f.6: enabling device (0000 -> 0001)>> >> >> >> > [ 2.399081] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI>> >> >> >> > 11>> >> >> >> > (level, low) -> IRQ 11>> >> >> >> > [ 2.399091] serial 0000:00:1f.6: PCI INT B disabled>> >> >> >> > [ 1480.459510] Intel ICH Modem 0000:00:1f.6: power state>> >> >> >> > changed>> >> >> >> > by>> >> >> >> > ACPI>> >> >> >> > to D0>> >> >> >> > [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B ->>> >> >> >> > Link[LNKB]>> >> >> >> > ->>> >> >> >> > GSI 11 (level, low) -> IRQ 11>> >> >> >> > [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency>> >> >> >> > timer>> >> >> >> > to>> >> >> >> > 64>> >> >> >> >>> >> >> >> > The PCI slot 00:1f.6 of the modem card may be disabled early in>> >> >> >> > a bootup process, but then enabled later. If modem drivers load>> >> >> >> > but the modem is not responsive, read DOCs/Bootup.txt about>> >> >> >> > possible>> >> >> >> > fixes.>> >> >> >> > Send dmesg.txt along with ModemData.txt to>> >> >> >> > discuss@xxxxxxxxxxxxx>> >> >> >> > if help is needed.>> >> >> >> >>> >> >> >> > Please do the above advice and your modem appears to be>> >> >> >> > supported>> >> >> >> > by>> >> >> >> > SLMODEMD since the device is /dev/ttySL0, but not 100% sure on>> >> >> >> > this.>> >> >> >> >>> >> >> >> > 1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem>> >> >> >> > Intel 82801CA-ICH3 Modem at irq 11>> >> >> >> >>> >> >> >> > Modem firmware information is in>> >> >> >> > /proc/asound/card1/codec97#0/mc97#1-1>> >> >> >> > ----------------------------------------------->> >> >> >> > Extended modem ID: codec=1 LIN1>> >> >> >> >>> >> >> >> > Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs>> >> >> >> > ------------------------------->> >> >> >> > 0:7c = 5349 and 0:7e = 4c27>> >> >> >> > are translated from hexadecimal code into the modem chip>> >> >> >> > identifier:>> >> >> >> > SIL27>> >> >> >> >>> >> >> >> >>> >> >> >> > The driver snd-intel8x0m with its dependent drivers:>> >> >> >> > snd_intel8x0m 22412 0>> >> >> >> > snd_ac97_codec 111652 2 snd_intel8x0m,snd_intel8x0>> >> >> >> > snd_pcm 83204 4>> >> >> >> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss>> >> >> >> > snd 63268 17>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device>> >> >> >> > snd_page_alloc 16136 3 snd_intel8x0m,snd_intel8x0,snd_pcm>> >> >> >> > ---------->> >> >> >> > provide modem + audio support.>> >> >> >> >>> >> >> >> > Get SLMODEMD.gcc4.3.tar.gz if you have not done so, from>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >> > http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD.gcc4.3.tar.gz>> >> >> >> >>> >> >> >> > extract it and follow the instructions therein.>> >> >> >> >>> >> >> >> > Report back if you run into problems.>> >> >> >> >>> >> >> >> > Regards,>> >> >> >> >>> >> >> >> > Antonio>> >> >> >> >>> >> >> >> >>> >> >> >> > --- On Fri, 11/21/08, King Derek <derek.king.wang@xxxxxxxxx>>> >> >> >> > wrote:>> >> >> >> >>> >> >> >> >> From: King Derek <derek.king.wang@xxxxxxxxx>>> >> >> >> >> Subject: ModemData.txt>> >> >> >> >> To: discuss@xxxxxxxxxxxxx>> >> >> >> >> Date: Friday, November 21, 2008, 5:25 PM>> >> >> >> >> Dear All,>> >> >> >> >>>> >> >> >> >> I installed Ubuntu on Toshiba.I got a PCMCIA Card Modem>> >> >> >> >> working well>> >> >> >> >> under Windows, but it doenot work well under Ubuntu.>> >> >> >> >>>> >> >> >> >> The attached is my ModemData.txt I got from scanModem.>> >> >> >> >>>> >> >> >> >> Pls kindly check and help me out.>> >> >> >> >>>> >> >> >> >> Thanks and best regards>> >> >> >> >> Derek>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >> >>> >> >> >>> >> >> >>> >> >> > ________________________________>> >> >> > 更多热辣资讯尽在新版MSN首页！ 立刻访问！>> >> >>> >> >>> >> > ________________________________>> >> > 八卦娱乐包打听，MSN资讯速递帮你忙！ 了解详细！>> >>> >>> >>> >>> > ________________________________>> > 使用新一代 Windows Live Messenger 轻松交流和共享！ 立刻下载！>>> ________________________________> 使用新一代 Windows Live Messenger 轻松交流和共享！ 立刻下载！
