derek The critical information included in your files is that your PCMCIAmodem is a PC-CDMA chipset type. Please Google seach for" PC-CDMA Linux"" PC-CDMA Linux drivers"and report any useful URLs. MarvS 2008/11/23 王伟超 <derek_maxport@xxxxxxxxxxx>:> Hi Marvin,>> I tried to get some info under Windows for my modem, but failed.>> Attached are drivers I got from the Windows.But I donot know if it can be of> any help for you to know more about the card.>> Thanks and best regards> Derek>>> Date: Sun, 23 Nov 2008 00:03:34 -0500>> From: marvin.stodolsky@xxxxxxxxx>> To: derek_maxport@xxxxxxxxxxx>> Subject: Re: PCMCIA CDMA Card Problem>> CC: discuss@xxxxxxxxxxxxx>>>> Derek,>>>> From the tests on the PCMCIA card, it does not appear to be>> supportable by the Linux serial drivers. If you can do Diagnostics as>> described in Softmodem.txt under MicroSoft, that might be informative.>>>> MarvS>>>> 2008/11/22 王伟超 <derek_maxport@xxxxxxxxxxx>:>> > Dear Marvin,>> >>> > Thanks for your kind mail!>> >>> > I did as requested and I put the result in the following:>> >>> >>> > root@ubuntu:~# sudo ifconfig eth0 down>> >>> > root@ubuntu:~# sudo modprobe -r snd-intel8x0m>> >>> > root@ubuntu:~# tail -f /var/log/messages &>> >>> > [1] 6174>> >>> > root@ubuntu:~# Nov 23 00:09:47 ubuntu kernel: [ 149.226672] type=1503>> > audit(1227370187.707:6): operation="socket_create" family="ax25">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226700] type=1503>> > audit(1227370187.707:7): operation="socket_create" family="netrom">> > sock_type="seqpacket" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226712] type=1503>> > audit(1227370187.707:8): operation="socket_create" family="rose">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226724] type=1503>> > audit(1227370187.707:9): operation="socket_create" family="ipx">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226736] type=1503>> > audit(1227370187.707:10): operation="socket_create" family="appletalk">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226748] type=1503>> > audit(1227370187.707:11): operation="socket_create" family="econet">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226760] type=1503>> > audit(1227370187.707:12): operation="socket_create" family="ash">> > sock_type="dgram" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.226771] type=1503>> > audit(1227370187.707:13): operation="socket_create" family="x25">> > sock_type="seqpacket" protocol=0 pid=5469 profile="/usr/sbin/cupsd">> >>> > Nov 23 00:09:47 ubuntu kernel: [ 149.245559] type=1503>> > audit(1227370187.727:14): operation="inode_permission">> > requested_mask="::r">> > denied_mask="::r" fsuid=7 name="/proc/5469/net/dev" pid=5469>> > profile="/usr/sbin/cupsd">> >>> > Nov 23 00:14:00 ubuntu syslogd 1.5.0#2ubuntu6: restart.>> >>> > Nov 23 00:24:40 ubuntu kernel: [ 1042.213084] pccard: card ejected from>> > slot>> > 0>> >>> > Nov 23 00:25:12 ubuntu kernel: [ 1073.536069] pccard: PCMCIA card>> > inserted>> > into slot 0>> >>> > Nov 23 00:25:12 ubuntu kernel: [ 1073.538229] pcmcia: registering new>> > device>> > pcmcia0.0>> >>> > Nov 23 00:25:12 ubuntu kernel: [ 1073.587579] 0.0: ttyS0 at I/O 0x3f8>> > (irq =>> > 3) is a 8250>> >>> >>> >>> >>> >>> > root@ubuntu:~# sudo wvdialconf wvtest>> >>> > Editing `wvtest'.>> >>> >>> >>> >>> >>> > Scanning your serial ports for a modem.>> >>> >>> >>> >>> >>> > Modem Port Scan<*1>: Scanning ttyS0 first, /dev/modem is a link to it.>> >>> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud>> >>> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud>> >>> > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.>> >>> > Modem Port Scan<*1>: S1 S2 S3>> >>> >>> >>> >>> >>> >>> >>> >>> >>> > Sorry, no modem was detected! Is it in use by another program?>> >>> > Did you configure it properly with setserial?>> >>> >>> >>> >>> >>> > Please read the FAQ at http://open.nit.ca/wiki/?WvDial>> >>> >>> >>> >>> >>> > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# dmesg | grep tty>> >>> > [ 0.004000] console [tty0] enabled>> >>> > [ 21.544543] 0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 8250>> >>> > [ 1073.587579] 0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 8250>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# pccardctl ident>> >>> > Socket 0:>> >>> > product info: "HighSpeed", "CDMA", "", "">> >>> > manfid: 0x0279, 0x950b>> >>> > function: 2 (serial)>> >>> > Socket 1:>> >>> > no product info available>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# pccardctl ident>> >>> > Socket 0:>> >>> > product info: "HighSpeed", "CDMA", "", "">> >>> > manfid: 0x0279, 0x950b>> >>> > function: 2 (serial)>> >>> > Socket 1:>> >>> > no product info available>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# pccardctl status>> >>> > Socket 0:>> >>> > 5.0V 16-bit PC Card>> >>> > Subdevice 0 (function 0) bound to driver "serial_cs">> >>> > Socket 1:>> >>> > no card>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# pccardctl info>> >>> > PRODID_1="HighSpeed">> >>> > PRODID_2="CDMA">> >>> > PRODID_3="">> >>> > PRODID_4="">> >>> > MANFID=0279,950b>> >>> > FUNCID=2>> >>> > PRODID_1="">> >>> > PRODID_2="">> >>> > PRODID_3="">> >>> > PRODID_4="">> >>> > MANFID=0000,0000>> >>> > FUNCID=255>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# ln -sf /dev/ttyS0 /dev/modem>> >>> > root@ubuntu:~# gedit /etc/wvdial.conf>> >>> > [Modem0]>> >>> > Modem = /dev/modem>> >>> > Baud = 230400>> >>> > SetVolume = 1>> >>> > Dial Command = ATDT>> >>> > Dial-AT-OK ATDT Command =>> >>> > Init1 = ATZ>> >>> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >>> > FlowControl = Hardware (CRTSCTS)>> >>> > New PPPD = yes>> >>> >>> >>> >>> >>> > [Dialer Defaults]>> >>> > Username = CARD>> >>> > Password = CARD>> >>> > Phone = #777>> >>> > Stupid Mode = 1>> >>> > Inherits = Modem0>> >>> > Carrier check = no>> >>> >>> >>> > root@ubuntu:~# wvdial>> >>> > --> WvDial: Internet dialer version 1.60>> >>> > --> Initializing modem.>> >>> > --> Sending: ATZ>> >>> > --> Sending: ATQ0>> >>> > --> Re-Sending: ATZ>> >>> > --> Modem not responding.>> >>> >>> >>> > root@ubuntu:~# setserial /dev/ttyS0 -a>> >>> > /dev/ttyS0, Line 0, UART: 8250, Port: 0x03f8, IRQ: 3>> >>> > Baud_base: 115200, close_delay: 50, divisor: 0>> >>> > closing_wait: none>> >>> > Flags: spd_normal skip_test>> >>> >>> >>> >>> >>> > root@ubuntu:~#>> >>> > root@ubuntu:~# setserial /dev/ttyS0 baud_base 230400>> >>> > root@ubuntu:~# wvdial>> >>> > --> WvDial: Internet dialer version 1.60>> >>> > --> Initializing modem.>> >>> > --> Sending: ATZ>> >>> > --> Sending: ATQ0>> >>> > --> Re-Sending: ATZ>> >>> > --> Modem not responding.>> >>> > root@ubuntu:~# setserial /dev/ttyS0 closing_wait 3000>> >>> > root@ubuntu:~# wvdial>> >>> > --> WvDial: Internet dialer version 1.60>> >>> > --> Initializing modem.>> >>> > --> Sending: ATZ>> >>> > --> Sending: ATQ0>> >>> > --> Re-Sending: ATZ>> >>> > --> Modem not responding.>> >>> > root@ubuntu:~# setserial /dev/ttyS0 closing_wait 3000>> >>> > root@ubuntu:~# wvdial>> >>> > --> WvDial: Internet dialer version 1.60>> >>> > --> Initializing modem.>> >>> > --> Sending: ATZ>> >>> > --> Sending: ATQ0>> >>> > --> Re-Sending: ATZ>> >>> > --> Modem not responding.>> >>> > root@ubuntu:~# setserial /dev/ttyS0 irq 4>> >>> > root@ubuntu:~# wvdial>> >>> > --> WvDial: Internet dialer version 1.60>> >>> > --> Initializing modem.>> >>> > --> Sending: ATZ>> >>> > --> Sending: ATQ0>> >>> > --> Re-Sending: ATZ>> >>> > --> Modem not responding.>> >>> > root@ubuntu:~# setserial /dev/ttyS0 -a>> >>> > /dev/ttyS0, Line 0, UART: 8250, Port: 0x03f8, IRQ: 4>> >>> > Baud_base: 230400, close_delay: 50, divisor: 0>> >>> > closing_wait: none>> >>> > Flags: spd_normal skip_test>> >>> >>> >>> >>> >>> >>> >>> >> Date: Sat, 22 Nov 2008 08:59:22 -0500>> >> From: marvin.stodolsky@xxxxxxxxx>> >> To: derek_maxport@xxxxxxxxxxx; discuss@xxxxxxxxxxxxx>> >> Subject: Re: ModemData.txt>> >>>> >> Derek,>> >>>> >> Please send to the List, not directly to me, as I'm not online much.>> >> Below is a typical wvdial.conf for usage with slmodemd serviced>> >> modems. Compare with yours.>> >>>> >> With respect to the PCMCIA card, I don't recognize Manufacture 0279.>> >> RE: Modem interrupt assignment and sharing:>> >> 11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2,>> >> yenta, yenta, Intel 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Model>> >> T-------->> >> Try freeing up resources with by detaching all USB devices.>> >> # sudo ifconfig eth0 down>> >> # sudo modprobe -r snd-intel*x0m>> >>>> >> Watch kernel messages with:>> >> $ sudo tail -f /var/log/messages &>> >> Remove the PCMCIA card. Wait a few seconds and put it back in. Some>> >> chipset identifiers may be output.>> >>>> >> Also see if the card may now be detected with:>> >> $ sudo wvdialconf wvtest>> >>>> >> MarvS>> >>>> >>>> >>>> >>>> >>>> >>>> >> [Dialer defaults]>> >> # are comment lines>> >> Modem = /dev/ttySL0>> >> Baud = 115200>> >> Init1 = ATZ>> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> ## for noisy lines try instead>> >> # Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34>> >> ISDN = 0>> >> Modem Type = Analog Modem>> >> Phone = 3015560020>> >> Username = LoginName@xxxxxxxxxxxxxxxx>> >> Password = LoginPassword>> >> # needed for /dev/pts/N type ports>> >> Carrier Check = no>> >>>> >>>> >>>> >> 2008/11/22 王伟超 <derek_maxport@xxxxxxxxxxx>:>> >> > Hello Marvin,>> >> >>> >> > Thanks for your help!>> >> >>> >> > Under your help, I came out with some result when doing wvdial.>> >> >>> >> >>> >> > root@ubuntu:/#>> >> >>> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3# gedit /etc/wvdial.conf>> >> >>> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3# wvdial>> >> >>> >> > --> WvDial: Internet dialer version 1.60>> >> >>> >> > --> Cannot get information for serial port.>> >> >>> >> > --> Initializing modem.>> >> >>> >> > --> Sending: ATZ>> >> >>> >> > ATZ>> >> >>> >> > OK>> >> >>> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >>> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>> >> >>> >> > OK>> >> >>> >> > --> Modem initialized.>> >> >>> >> > --> Idle Seconds = 300, disabling automatic reconnect.>> >> >>> >> > --> Sending: ATDT#777>> >> >>> >> > --> Waiting for carrier.>> >> >>> >> > ATDT#777>> >> >>> >> > NO DIALTONE>> >> >>> >> > --> No dial tone.>> >> >>> >> > --> Disconnecting at Sat Nov 22 13:05:22 2008>> >> >>> >> > root@ubuntu:/media/disk/SLMODEMD.gcc4.3#>> >> >>> >> >>> >> >>> >> > Pls kindly help me out with this problem.>> >> >>> >> > One more thing to be concerned:>> >> >>> >> > I got a PCMCIA card available on my Ubuntu. I used pccardctl indent,>> >> > it>> >> > shows something about the card. But when I do wvdialconf. It cannot>> >> > detect>> >> > the modem. When I open a new consule, it says "too much work for irq>> >> > 3".>> >> > This PCMCIA card is inserted in slot 0. Manfid 0x0279,0x950b. When>> >> > using>> >> > setserial, it shows irq 3. I guess if I allocate a right irq port for>> >> > it, it>> >> > can work out. But I have no idea about it.>> >> >>> >> > Pls kindly check and inform.>> >> >>> >> > Thanks and best regards>> >> > Derek>> >> >>> >> >>> >> >> Date: Fri, 21 Nov 2008 22:00:24 -0500>> >> >> From: marvin.stodolsky@xxxxxxxxx>> >> >> To: derek.king.wang@xxxxxxxxx>> >> >> Subject: Re: ModemData.txt>> >> >> CC: discuss@xxxxxxxxxxxxx>> >> >>>> >> >> Antonio>> >> >>>> >> >> The modem does get activated at the end:>> >> >> [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB]>> >> >> -> GSI 11 (level, low) -> IRQ 11>> >> >> [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency timer>> >> >> to>> >> >> 64>> >> >> ------------>> >> >> as the rest of the diagnostics show.>> >> >>>> >> >> King,>> >> >> It is an intermal Winmodem that is being detected not your PCMCIA>> >> >> modem.>> >> >> It you want to use the PCMCIA, do diagnostics under Microsoft to>> >> >> identify its chipset.>> >> >>>> >> >> Incidentally, the modem driver snd-intel8x0m occassionally dies when>> >> >> loaded. It can be reactivated by unloading and reloading.>> >> >>>> >> >> $ sudo modprobe -r snd-intel8x0m>> >> >> $ sudo modprobe snd-intel8x0m>> >> >>>> >> >> MarvS>> >> >>>> >> >>>> >> >> On Fri, Nov 21, 2008 at 9:41 PM, Antonio Olivares>> >> >> <olivares14031@xxxxxxxxx> wrote:>> >> >> > King,>> >> >> >>> >> >> > There's a problem here:>> >> >> >>> >> >> > Modem Interrupt and sharing :(>> >> >> >>> >> >> > Modem interrupt assignment and sharing:>> >> >> > 11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta,>> >> >> > Intel>> >> >> > 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Modem>> >> >> > --- Bootup diagnostics for card in PCI slot 00:1f.6 ---->> >> >> > [ 0.622948] PCI: 0000:00:1f.6 reg 10 io port: [0, ff]>> >> >> > [ 0.622958] PCI: 0000:00:1f.6 reg 14 io port: [0, 7f]>> >> >> > [ 0.635517] pnp 00:08: io resource (0x10-0x1f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635522] pnp 00:08: io resource (0x24-0x25) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635527] pnp 00:08: io resource (0x28-0x29) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635532] pnp 00:08: io resource (0x2c-0x2d) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635537] pnp 00:08: io resource (0x2e-0x2f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635542] pnp 00:08: io resource (0x30-0x31) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635547] pnp 00:08: io resource (0x34-0x35) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635552] pnp 00:08: io resource (0x38-0x39) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635557] pnp 00:08: io resource (0x3c-0x3d) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635562] pnp 00:08: io resource (0x4e-0x4f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635567] pnp 00:08: io resource (0x50-0x53) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635572] pnp 00:08: io resource (0x62-0x63) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635577] pnp 00:08: io resource (0x65-0x65) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635582] pnp 00:08: io resource (0x66-0x66) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635587] pnp 00:08: io resource (0x72-0x77) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635592] pnp 00:08: io resource (0x80-0x80) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635597] pnp 00:08: io resource (0x84-0x86) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635602] pnp 00:08: io resource (0x88-0x88) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635607] pnp 00:08: io resource (0x8c-0x8e) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635612] pnp 00:08: io resource (0x90-0x9f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635617] pnp 00:08: io resource (0xa4-0xa5) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635622] pnp 00:08: io resource (0xa8-0xa9) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635627] pnp 00:08: io resource (0xac-0xad) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635632] pnp 00:08: io resource (0xb0-0xb5) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635637] pnp 00:08: io resource (0xb8-0xb9) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635642] pnp 00:08: io resource (0xbc-0xbd) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635648] pnp 00:08: io resource (0xe0-0xef) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 0 (0x0-0xff), disabling>> >> >> > [ 0.635658] pnp 00:08: io resource (0x10-0x1f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635663] pnp 00:08: io resource (0x24-0x25) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635668] pnp 00:08: io resource (0x28-0x29) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635673] pnp 00:08: io resource (0x2c-0x2d) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635678] pnp 00:08: io resource (0x2e-0x2f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635683] pnp 00:08: io resource (0x30-0x31) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635688] pnp 00:08: io resource (0x34-0x35) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635693] pnp 00:08: io resource (0x38-0x39) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635698] pnp 00:08: io resource (0x3c-0x3d) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635703] pnp 00:08: io resource (0x4e-0x4f) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635708] pnp 00:08: io resource (0x50-0x53) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635713] pnp 00:08: io resource (0x62-0x63) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635718] pnp 00:08: io resource (0x65-0x65) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635723] pnp 00:08: io resource (0x66-0x66) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 0.635728] pnp 00:08: io resource (0x72-0x77) overlaps>> >> >> > 0000:00:1f.6>> >> >> > BAR>> >> >> > 1 (0x0-0x7f), disabling>> >> >> > [ 2.399054] serial 0000:00:1f.6: power state changed by ACPI to D0>> >> >> > [ 2.399067] serial 0000:00:1f.6: enabling device (0000 -> 0001)>> >> >> > [ 2.399081] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11>> >> >> > (level, low) -> IRQ 11>> >> >> > [ 2.399091] serial 0000:00:1f.6: PCI INT B disabled>> >> >> > [ 1480.459510] Intel ICH Modem 0000:00:1f.6: power state changed>> >> >> > by>> >> >> > ACPI>> >> >> > to D0>> >> >> > [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B ->>> >> >> > Link[LNKB]>> >> >> > ->>> >> >> > GSI 11 (level, low) -> IRQ 11>> >> >> > [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency timer>> >> >> > to>> >> >> > 64>> >> >> >>> >> >> > The PCI slot 00:1f.6 of the modem card may be disabled early in>> >> >> > a bootup process, but then enabled later. If modem drivers load>> >> >> > but the modem is not responsive, read DOCs/Bootup.txt about>> >> >> > possible>> >> >> > fixes.>> >> >> > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx>> >> >> > if help is needed.>> >> >> >>> >> >> > Please do the above advice and your modem appears to be supported>> >> >> > by>> >> >> > SLMODEMD since the device is /dev/ttySL0, but not 100% sure on>> >> >> > this.>> >> >> >>> >> >> > 1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem>> >> >> > Intel 82801CA-ICH3 Modem at irq 11>> >> >> >>> >> >> > Modem firmware information is in>> >> >> > /proc/asound/card1/codec97#0/mc97#1-1>> >> >> > ----------------------------------------------->> >> >> > Extended modem ID: codec=1 LIN1>> >> >> >>> >> >> > Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs>> >> >> > ------------------------------->> >> >> > 0:7c = 5349 and 0:7e = 4c27>> >> >> > are translated from hexadecimal code into the modem chip>> >> >> > identifier:>> >> >> > SIL27>> >> >> >>> >> >> >>> >> >> > The driver snd-intel8x0m with its dependent drivers:>> >> >> > snd_intel8x0m 22412 0>> >> >> > snd_ac97_codec 111652 2 snd_intel8x0m,snd_intel8x0>> >> >> > snd_pcm 83204 4>> >> >> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss>> >> >> > snd 63268 17>> >> >> >>> >> >> >>> >> >> > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device>> >> >> > snd_page_alloc 16136 3 snd_intel8x0m,snd_intel8x0,snd_pcm>> >> >> > ---------->> >> >> > provide modem + audio support.>> >> >> >>> >> >> > Get SLMODEMD.gcc4.3.tar.gz if you have not done so, from>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> > http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD.gcc4.3.tar.gz>> >> >> >>> >> >> > extract it and follow the instructions therein.>> >> >> >>> >> >> > Report back if you run into problems.>> >> >> >>> >> >> > Regards,>> >> >> >>> >> >> > Antonio>> >> >> >>> >> >> >>> >> >> > --- On Fri, 11/21/08, King Derek <derek.king.wang@xxxxxxxxx>>> >> >> > wrote:>> >> >> >>> >> >> >> From: King Derek <derek.king.wang@xxxxxxxxx>>> >> >> >> Subject: ModemData.txt>> >> >> >> To: discuss@xxxxxxxxxxxxx>> >> >> >> Date: Friday, November 21, 2008, 5:25 PM>> >> >> >> Dear All,>> >> >> >>>> >> >> >> I installed Ubuntu on Toshiba.I got a PCMCIA Card Modem>> >> >> >> working well>> >> >> >> under Windows, but it doenot work well under Ubuntu.>> >> >> >>>> >> >> >> The attached is my ModemData.txt I got from scanModem.>> >> >> >>>> >> >> >> Pls kindly check and help me out.>> >> >> >>>> >> >> >> Thanks and best regards>> >> >> >> Derek>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >>> >> >>> >> > ________________________________>> >> > 更多热辣资讯尽在新版MSN首页！ 立刻访问！>> >>> >>> > ________________________________>> > 八卦娱乐包打听，MSN资讯速递帮你忙！ 了解详细！>>>>> ________________________________> 使用新一代 Windows Live Messenger 轻松交流和共享！ 立刻下载！
