Dear All,
I installed Ubuntu on Toshiba.I got a PCMCIA Card Modem working well
under Windows, but it doenot work well under Ubuntu.
The attached is my ModemData.txt I got from scanModem.
Pls kindly check and help me out.
Thanks and best regards
Derek
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2008_11_06
The modem symbolic link is /dev/modem -> /dev/ttyS0
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 07c4:a4a5 Datafab Systems, Inc.
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 093a:2510 Pixart Imaging, Inc.
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:2486 1179:0001 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller
Modem interrupt assignment and sharing:
11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta, Intel 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Modem
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.622948] PCI: 0000:00:1f.6 reg 10 io port: [0, ff]
[ 0.622958] PCI: 0000:00:1f.6 reg 14 io port: [0, 7f]
[ 0.635517] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635522] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635527] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635532] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635537] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635542] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635547] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635552] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635557] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635562] pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635567] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635572] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635577] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635582] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635587] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635592] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635597] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635602] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635607] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635612] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635617] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635622] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635627] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635632] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635637] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635642] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635648] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.635658] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635663] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635668] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635673] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635678] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635683] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635688] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635693] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635698] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635703] pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635708] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635713] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635718] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635723] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.635728] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 2.399054] serial 0000:00:1f.6: power state changed by ACPI to D0
[ 2.399067] serial 0000:00:1f.6: enabling device (0000 -> 0001)
[ 2.399081] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 2.399091] serial 0000:00:1f.6: PCI INT B disabled
[ 1480.459510] Intel ICH Modem 0000:00:1f.6: power state changed by ACPI to D0
[ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
10de:026a
10de:026c
10de:03f0
10de:0371
10de:055c
8086:2668
8086:27d8
8086:284b
8086:284d
8086:293e
10b9:5461
1106:3288
1002:4383
1002:437b
1002:aa08
1039:7502
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel 82801CA-ICH3 Modem], device 0: Intel ICH - Modem [Intel 82801CA-ICH3 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-01: Intel ICH - MIC ADC : Intel 82801CA-ICH3 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801CA-ICH3 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801CA-ICH3 Modem - Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [I82801CAICH3 ]: ICH - Intel 82801CA-ICH3
Intel 82801CA-ICH3 with YMF753 at irq 11
1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem
Intel 82801CA-ICH3 Modem at irq 11
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
are translated from hexadecimal code into the modem chip identifier: SIL27
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 22412 0
snd_ac97_codec 111652 2 snd_intel8x0m,snd_intel8x0
snd_pcm 83204 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 63268 17 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 16136 3 snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
disconnect "chat -- \d+++\d\c OK ath0 OK"
asyncmap 0
noauth
crtscts
lock
hide-password
modem
mru 542
netmask 255.255.255.0
debug
mtu 512
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 10 2008-11-21 23:48 /dev/modem -> /dev/ttyS0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
