Antonio The modem does get activated at the end: [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 ------------ as the rest of the diagnostics show. King, It is an intermal Winmodem that is being detected not your PCMCIA modem. It you want to use the PCMCIA, do diagnostics under Microsoft to identify its chipset. Incidentally, the modem driver snd-intel8x0m occassionally dies when loaded. It can be reactivated by unloading and reloading. $ sudo modprobe -r snd-intel8x0m $ sudo modprobe snd-intel8x0m MarvS On Fri, Nov 21, 2008 at 9:41 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > King, > > There's a problem here: > > Modem Interrupt and sharing :( > > Modem interrupt assignment and sharing: > 11: 20570 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta, Intel 82801CA-ICH3, eth0, Intel 82801CA-ICH3 Modem > --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- > [ 0.622948] PCI: 0000:00:1f.6 reg 10 io port: [0, ff] > [ 0.622958] PCI: 0000:00:1f.6 reg 14 io port: [0, 7f] > [ 0.635517] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635522] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635527] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635532] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635537] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635542] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635547] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635552] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635557] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635562] pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635567] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635572] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635577] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635582] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635587] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635592] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635597] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635602] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635607] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635612] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635617] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635622] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635627] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635632] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635637] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635642] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635648] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling > [ 0.635658] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635663] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635668] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635673] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635678] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635683] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635688] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635693] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635698] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635703] pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635708] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635713] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635718] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635723] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 0.635728] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling > [ 2.399054] serial 0000:00:1f.6: power state changed by ACPI to D0 > [ 2.399067] serial 0000:00:1f.6: enabling device (0000 -> 0001) > [ 2.399081] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 > [ 2.399091] serial 0000:00:1f.6: PCI INT B disabled > [ 1480.459510] Intel ICH Modem 0000:00:1f.6: power state changed by ACPI to D0 > [ 1480.462475] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 > [ 1480.462532] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 > > The PCI slot 00:1f.6 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > Please do the above advice and your modem appears to be supported by SLMODEMD since the device is /dev/ttySL0, but not 100% sure on this. > > 1 [Modem ]: ICH-MODEM - Intel 82801CA-ICH3 Modem > Intel 82801CA-ICH3 Modem at irq 11 > > Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1 > ----------------------------------------------- > Extended modem ID: codec=1 LIN1 > > Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs > ------------------------------- > 0:7c = 5349 and 0:7e = 4c27 > are translated from hexadecimal code into the modem chip identifier: SIL27 > > > The driver snd-intel8x0m with its dependent drivers: > snd_intel8x0m 22412 0 > snd_ac97_codec 111652 2 snd_intel8x0m,snd_intel8x0 > snd_pcm 83204 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss > snd 63268 17 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > snd_page_alloc 16136 3 snd_intel8x0m,snd_intel8x0,snd_pcm > ---------- > provide modem + audio support. > > Get SLMODEMD.gcc4.3.tar.gz if you have not done so, from > > http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD.gcc4.3.tar.gz > > extract it and follow the instructions therein. > > Report back if you run into problems. > > Regards, > > Antonio > > > --- On Fri, 11/21/08, King Derek <derek.king.wang@xxxxxxxxx> wrote: > >> From: King Derek <derek.king.wang@xxxxxxxxx> >> Subject: ModemData.txt >> To: discuss@xxxxxxxxxxxxx >> Date: Friday, November 21, 2008, 5:25 PM >> Dear All, >> >> I installed Ubuntu on Toshiba.I got a PCMCIA Card Modem >> working well >> under Windows, but it doenot work well under Ubuntu. >> >> The attached is my ModemData.txt I got from scanModem. >> >> Pls kindly check and help me out. >> >> Thanks and best regards >> Derek > > > >
