here is the info from dmesg and interrupts:
----------------------
CPU0 CPU1
0: 15291 15004 IO-APIC-edge timer
1: 34 41 IO-APIC-edge i8042
8: 17 20 IO-APIC-edge rtc
9: 47 50 IO-APIC-fasteoi acpi
12: 19448 19534 IO-APIC-edge i8042
14: 5305 5257 IO-APIC-edge libata
15: 243 245 IO-APIC-edge libata
16: 4146 4203 IO-APIC-fasteoi
uhci_hcd:usb1, nvidia
17: 0 0 IO-APIC-fasteoi
uhci_hcd:usb4
18: 86 71 IO-APIC-fasteoi ohci1394,
yenta, sdhci:slot0
19: 401 395 IO-APIC-fasteoi
uhci_hcd:usb2, HDA Intel
20: 0 0 IO-APIC-fasteoi
uhci_hcd:usb3, ehci_hcd:usb7
21: 0 0 IO-APIC-fasteoi
uhci_hcd:usb5, ehci_hcd:usb6
218: 469 457 PCI-MSI-edge iwl3945
219: 0 1 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 13413 13488 Local timer interrupts
RES: 21385 21153 Rescheduling interrupts
CAL: 177 364 function call interrupts
TLB: 565 452 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic
(buildd@terranova) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11
23:41:49 UTC 2008
(Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 -
000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 -
000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 -
000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 -
0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524208) 0
entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524208
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524208
[ 0.000000] On node 0 totalpages: 524208
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO
batch:31
[ 0.000000] HighMem zone: 2303 pages used for
memmap
[ 0.000000] HighMem zone: 292529 pages, LIFO
batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F84A0
checksum 0
[ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB
MEGABOOK 20070517 MSFT
97)
[ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707
FACP1702 20070517 MSFT
97)
[ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636
M1636000 0 INTL
20051117)
[ 0.000000] ACPI: FACS 7FFBE000, 0040
[ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707
APIC1702 20070517 MSFT
97)
[ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707
OEMMCFG 20070517 MSFT
97)
[ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB
MEGABOOK 20070517 MSFT
97)
[ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707
OEMB1702 20070517 MSFT
97)
[ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707
OEMHPET 20070517 MSFT
97)
[ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef
CpuPm 3000 INTL
20051117)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01]
enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address
0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O
APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base:
0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration
information
[ 0.000000] Allocating PCI resources starting at
88000000 (gap:
80000000:7ee00000)
[ 0.000000] swsusp: Registered nosave memory region:
000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000a0000 -
00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000e0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility
grouping on. Total
pages: 520113
[ 0.000000] Kernel command line:
root=UUID=c9a4ab4b-c5c2-4fc3-b20d-39a4edfb8f6a ro quiet
splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore...
done.
[ 0.000000] Enabling unmasked SIMD FPU exception
support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12,
16384 bytes)
[ 0.000000] Detected 1795.553 MHz processor.
[ 18.591546] Console: colour VGA+ 80x25
[ 18.591549] console [tty0] enabled
[ 18.591801] Dentry cache hash table entries: 131072
(order: 7, 524288
bytes)
[ 18.592074] Inode-cache hash table entries: 65536
(order: 6, 262144
bytes)
[ 18.680987] Memory: 2066816k/2096832k available
(2177k kernel code,
28712k reserved, 1006k data, 368k init, 1179328k
highmem)
[ 18.680994] virtual kernel memory layout:
[ 18.680995] fixmap : 0xfff4b000 - 0xfffff000 (
720 kB)
[ 18.680996] pkmap : 0xff800000 - 0xffc00000
(4096 kB)
[ 18.680997] vmalloc : 0xf8800000 - 0xff7fe000 (
111 MB)
[ 18.680998] lowmem : 0xc0000000 - 0xf8000000 (
896 MB)
[ 18.680999] .init : 0xc0421000 - 0xc047d000 (
368 kB)
[ 18.680999] .data : 0xc0320474 - 0xc041bdc4
(1006 kB)
[ 18.681000] .text : 0xc0100000 - 0xc0320474
(2177 kB)
[ 18.681003] Checking if this processor honours the WP
bit even in
supervisor mode... Ok.
[ 18.681041] SLUB: Genslabs=11, HWalign=64, Order=0-1,
MinObjects=4,
CPUs=2, Nodes=1
[ 18.681182] hpet clockevent registered
[ 18.761145] Calibrating delay using timer specific
routine.. 3595.23
BogoMIPS (lpj=7190474)
[ 18.761166] Security Framework initialized
[ 18.761172] SELinux: Disabled at boot.
[ 18.761184] AppArmor: AppArmor initialized
[ 18.761188] Failure registering capabilities with
primary security
module.
[ 18.761195] Mount-cache hash table entries: 512
[ 18.761307] Initializing cgroup subsys ns
[ 18.761312] Initializing cgroup subsys cpuacct
[ 18.761321] CPU: After generic identify, caps:
bfebfbff 20100000 00000000
00000000 0000e3bd 00000000 00000001 00000000
[ 18.761328] monitor/mwait feature present.
[ 18.761329] using mwait in idle threads.
[ 18.761333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.761335] CPU: L2 cache: 2048K
[ 18.761337] CPU: Physical Processor ID: 0
[ 18.761339] CPU: Processor Core ID: 0
[ 18.761340] CPU: After all inits, caps: bfebfbff
20100000 00000000
00003940 0000e3bd 00000000 00000001 00000000
[ 18.761349] Compat vDSO mapped to ffffe000.
[ 18.761361] Checking 'hlt' instruction... OK.
[ 18.777489] SMP alternatives: switching to UP code
[ 18.778986] Early unpacking initramfs... done
[ 19.097436] ACPI: Core revision 20070126
[ 19.097475] ACPI: Looking for DSDT in initramfs...
error, file /DSDT.aml
not found.
[ 19.099932] CPU0: Intel(R) Core(TM)2 Duo CPU
T7100 @ 1.80GHz stepping
0d
[ 19.099947] SMP alternatives: switching to SMP code
[ 19.100583] Booting processor 1/1 eip 3000
[ 19.110780] Initializing CPU#1
[ 19.188901] Calibrating delay using timer specific
routine.. 3591.06
BogoMIPS (lpj=7182126)
[ 19.188907] CPU: After generic identify, caps:
bfebfbff 20100000 00000000
00000000 0000e3bd 00000000 00000001 00000000
[ 19.188912] monitor/mwait feature present.
[ 19.188915] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.188917] CPU: L2 cache: 2048K
[ 19.188918] CPU: Physical Processor ID: 0
[ 19.188920] CPU: Processor Core ID: 1
[ 19.188921] CPU: After all inits, caps: bfebfbff
20100000 00000000
00003940 0000e3bd 00000000 00000001 00000000
[ 19.189459] CPU1: Intel(R) Core(TM)2 Duo CPU
T7100 @ 1.80GHz stepping
0d
[ 19.189481] Total of 2 processors activated (7186.30
BogoMIPS).
[ 19.189655] ENABLING IO-APIC IRQs
[ 19.189842] ..TIMER: vector=0x31 apic1=0 pin1=2
apic2=-1 pin2=-1
[ 19.336923] checking TSC synchronization [CPU#0 ->
CPU#1]: passed.
[ 19.356925] Brought up 2 CPUs
[ 19.356948] CPU0 attaching sched-domain:
[ 19.356950] domain 0: span 03
[ 19.356952] groups: 01 02
[ 19.356955] CPU1 attaching sched-domain:
[ 19.356956] domain 0: span 03
[ 19.356958] groups: 02 01
[ 19.357155] net_namespace: 64 bytes
[ 19.357165] Booting paravirtualized kernel on bare
hardware
[ 19.357596] Time: 16:33:38 Date: 07/18/08
[ 19.357621] NET: Registered protocol family 16
[ 19.357791] EISA bus registered
[ 19.357795] ACPI: bus type pci registered
[ 19.358035] PCI: PCI BIOS revision 3.00 entry at
0xf0031, last bus=6
[ 19.358037] PCI: Using configuration type 1
[ 19.358058] Setting up standard PCI resources
[ 19.366951] ACPI: EC: Look up EC in DSDT
[ 19.370049] ACPI: Interpreter enabled
[ 19.370052] ACPI: (supports S0 S1 S3 S4 S5)
[ 19.370067] ACPI: Using IOAPIC for interrupt routing
[ 19.370313] Error attaching device data
[ 19.370351] Error attaching device data
[ 19.372106] ACPI: EC: non-query interrupt received,
switching to
interrupt mode
[ 19.376886] ACPI: EC: GPE = 0x17, I/O: command/status
= 0x66, data = 0x62
[ 19.376889] ACPI: EC: driver started in interrupt
mode
[ 19.376985] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.377940] PCI quirk: region 0800-087f claimed by
ICH6 ACPI/GPIO/TCO
[ 19.377944] PCI quirk: region 0500-053f claimed by
ICH6 GPIO
[ 19.379696] PCI: Transparent bridge - 0000:00:1e.0
[ 19.379787] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
[ 19.379916] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P2._PRT]
[ 19.379995] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P1._PRT]
[ 19.380096] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P7._PRT]
[ 19.380171] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P8._PRT]
[ 19.391900] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4
5 6 7 *10 11 12 14
15)
[ 19.392012] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4
5 6 7 10 11 12 14
15) *0, disabled.
[ 19.392122] ACPI: PCI Interrupt Link [LNKC] (IRQs *3
4 5 6 7 10 11 12 14
15)
[ 19.392231] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4
5 6 7 10 *11 12 14
15)
[ 19.392339] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4
5 6 7 10 11 12 14
15) *0, disabled.
[ 19.392448] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4
*5 6 7 10 11 12 14
15)
[ 19.392556] ACPI: PCI Interrupt Link [LNKG] (IRQs 3
*4 5 6 7 10 11 12 14
15)
[ 19.392665] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4
5 6 *7 10 11 12 14
15)
[ 19.392787] Linux Plug and Play Support v0.97 (c)
Adam Belay
[ 19.392818] pnp: PnP ACPI init
[ 19.392825] ACPI: bus type pnp registered
[ 19.394871] pnp: PnP ACPI: found 13 devices
[ 19.394874] ACPI: ACPI bus type pnp unregistered
[ 19.394877] PnPBIOS: Disabled by ACPI PNP
[ 19.395075] PCI: Using ACPI for IRQ routing
[ 19.395078] PCI: If a device doesn't work, try
"pci=routeirq". If it
helps, post a report
[ 19.448769] NET: Registered protocol family 8
[ 19.448771] NET: Registered protocol family 20
[ 19.448802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 19.448806] hpet0: 3 64-bit timers, 14318180 Hz
[ 19.449838] AppArmor: AppArmor Filesystem Enabled
[ 19.452760] Time: tsc clocksource has been installed.
[ 19.452767] Switched to high resolution mode on CPU 0
[ 19.452867] Switched to high resolution mode on CPU 1
[ 19.468746] system 00:01: iomem range
0xfed14000-0xfed19fff has been
reserved
[ 19.468755] system 00:08: ioport range 0x400-0x41f
has been reserved
[ 19.468758] system 00:08: ioport range 0x4d0-0x4d1
has been reserved
[ 19.468760] system 00:08: ioport range 0x800-0x87f
has been reserved
[ 19.468763] system 00:08: ioport range 0x500-0x53f
has been reserved
[ 19.468765] system 00:08: iomem range
0xfed1c000-0xfed1ffff has been
reserved
[ 19.468768] system 00:08: iomem range
0xfed20000-0xfed3ffff has been
reserved
[ 19.468770] system 00:08: iomem range
0xfed40000-0xfed8ffff has been
reserved
[ 19.468776] system 00:0a: iomem range
0xfec00000-0xfec00fff has been
reserved
[ 19.468779] system 00:0a: iomem range
0xfee00000-0xfee00fff could not be
reserved
[ 19.468784] system 00:0b: iomem range
0xe0000000-0xefffffff has been
reserved
[ 19.468790] system 00:0c: iomem range 0x0-0x9ffff
could not be reserved
[ 19.468792] system 00:0c: iomem range 0xc0000-0xcffff
could not be
reserved
[ 19.468795] system 00:0c: iomem range 0xe0000-0xfffff
could not be
reserved
[ 19.468797] system 00:0c: iomem range
0x100000-0x7fffffff could not be
reserved
[ 19.468800] system 00:0c: iomem range
0xfed90000-0xffffffff could not be
reserved
[ 19.499181] PCI: Bridge: 0000:00:01.0
[ 19.499184] IO window: c000-cfff
[ 19.499187] MEM window: fa000000-fe0fffff
[ 19.499190] PREFETCH window: d0000000-dfffffff
[ 19.499194] PCI: Bridge: 0000:00:1c.0
[ 19.499195] IO window: disabled.
[ 19.499201] MEM window: disabled.
[ 19.499205] PREFETCH window: disabled.
[ 19.499211] PCI: Bridge: 0000:00:1c.3
[ 19.499212] IO window: disabled.
[ 19.499218] MEM window: fe100000-fe1fffff
[ 19.499222] PREFETCH window: disabled.
[ 19.499228] PCI: Bridge: 0000:00:1c.4
[ 19.499231] IO window: d000-dfff
[ 19.499237] MEM window: fe200000-fe2fffff
[ 19.499241] PREFETCH window: disabled.
[ 19.499254] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[ 19.499256] IO window: 0000e000-0000e0ff
[ 19.499261] IO window: 0000e400-0000e4ff
[ 19.499266] PREFETCH window: 88000000-8bffffff
[ 19.499271] MEM window: 8c000000-8fffffff
[ 19.499276] PCI: Bridge: 0000:00:1e.0
[ 19.499279] IO window: e000-efff
[ 19.499285] MEM window: fe300000-febfffff
[ 19.499289] PREFETCH window: f7000000-f8ffffff
[ 19.499306] ACPI: PCI Interrupt 0000:00:01.0[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 19.499311] PCI: Setting latency timer of device
0000:00:01.0 to 64
[ 19.499335] ACPI: PCI Interrupt 0000:00:1c.0[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 19.499340] PCI: Setting latency timer of device
0000:00:1c.0 to 64
[ 19.499365] ACPI: PCI Interrupt 0000:00:1c.3[D] ->
GSI 19 (level, low) ->
IRQ 17
[ 19.499371] PCI: Setting latency timer of device
0000:00:1c.3 to 64
[ 19.499395] ACPI: PCI Interrupt 0000:00:1c.4[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 19.499400] PCI: Setting latency timer of device
0000:00:1c.4 to 64
[ 19.499415] PCI: Setting latency timer of device
0000:00:1e.0 to 64
[ 19.499433] ACPI: PCI Interrupt 0000:05:04.0[A] ->
GSI 22 (level, low) ->
IRQ 18
[ 19.499446] NET: Registered protocol family 2
[ 19.536730] IP route cache hash table entries: 32768
(order: 5, 131072
bytes)
[ 19.536941] TCP established hash table entries:
131072 (order: 8, 1048576
bytes)
[ 19.537332] TCP bind hash table entries: 65536
(order: 7, 524288 bytes)
[ 19.537523] TCP: Hash tables configured (established
131072 bind 65536)
[ 19.537525] TCP reno registered
[ 19.548792] checking if image is initramfs... it is
[ 20.176529] Freeing initrd memory: 7329k freed
[ 20.177218] audit: initializing netlink socket
(disabled)
[ 20.177230] audit(1216398818.369:1): initialized
[ 20.177428] highmem bounce pool size: 64 pages
[ 20.179215] VFS: Disk quotas dquot_6.5.1
[ 20.179282] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
[ 20.179401] io scheduler noop registered
[ 20.179403] io scheduler anticipatory registered
[ 20.179405] io scheduler deadline registered
[ 20.179417] io scheduler cfq registered (default)
[ 20.179567] Boot video device is 0000:01:00.0
[ 20.179669] PCI: Setting latency timer of device
0000:00:01.0 to 64
[ 20.179706] assign_interrupt_mode Found MSI
capability
[ 20.179736] Allocate Port
Service[0000:00:01.0:pcie00]
[ 20.179767] Allocate Port
Service[0000:00:01.0:pcie02]
[ 20.179842] PCI: Setting latency timer of device
0000:00:1c.0 to 64
[ 20.179903] assign_interrupt_mode Found MSI
capability
[ 20.179951] Allocate Port
Service[0000:00:1c.0:pcie00]
[ 20.179980] Allocate Port
Service[0000:00:1c.0:pcie02]
[ 20.180080] PCI: Setting latency timer of device
0000:00:1c.3 to 64
[ 20.180141] assign_interrupt_mode Found MSI
capability
[ 20.180189] Allocate Port
Service[0000:00:1c.3:pcie00]
[ 20.180219] Allocate Port
Service[0000:00:1c.3:pcie02]
[ 20.180318] PCI: Setting latency timer of device
0000:00:1c.4 to 64
[ 20.180382] assign_interrupt_mode Found MSI
capability
[ 20.180429] Allocate Port
Service[0000:00:1c.4:pcie00]
[ 20.180461] Allocate Port
Service[0000:00:1c.4:pcie02]
[ 20.180704] isapnp: Scanning for PnP cards...
[ 20.535828] isapnp: No Plug & Play device found
[ 20.558724] Real Time Clock Driver v1.12ac
[ 20.558885] hpet_resources: 0xfed00000 is busy
[ 20.558925] Serial: 8250/16550 driver $Revision: 1.90
$ 4 ports, IRQ
sharing enabled
[ 20.560040] RAMDISK driver initialized: 16 RAM disks
of 65536K size 1024
blocksize
[ 20.560098] input: Macintosh mouse button emulation
as
/devices/virtual/input/input0
[ 20.560196] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 20.560532] i8042.c: Detected active multiplexing
controller, rev 1.1.
[ 20.560607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.560611] serio: i8042 AUX0 port at 0x60,0x64 irq
12
[ 20.560613] serio: i8042 AUX1 port at 0x60,0x64 irq
12
[ 20.560615] serio: i8042 AUX2 port at 0x60,0x64 irq
12
[ 20.560618] serio: i8042 AUX3 port at 0x60,0x64 irq
12
[ 20.592165] mice: PS/2 mouse device common for all
mice
[ 20.592266] EISA: Probing bus 0 at eisa.0
[ 20.592306] EISA: Detected 0 cards.
[ 20.592308] cpuidle: using governor ladder
[ 20.592310] cpuidle: using governor menu
[ 20.592385] NET: Registered protocol family 1
[ 20.592410] Using IPI No-Shortcut mode
[ 20.592435] registered taskstats version 1
[ 20.592536] Magic number: 0:86:591
[ 20.592561] hash matches device ptyc9
[ 20.592601] BIOS EDD facility v0.16 2004-Jun-25, 0
devices found
[ 20.592603] EDD information not available.
[ 20.592783] Freeing unused kernel memory: 368k freed
[ 20.595313] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 21.794904] fuse init (API version 7.9)
[ 21.812486] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef
Cpu0Ist 3000 INTL
20051117)
[ 21.812674] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef
Cpu0Cst 3001 INTL
20051117)
[ 21.812954] Monitor-Mwait will be used to enter C-1
state
[ 21.812956] Monitor-Mwait will be used to enter C-2
state
[ 21.812959] Monitor-Mwait will be used to enter C-3
state
[ 21.813069] ACPI: CPU0 (power states: C1[C1] C2[C2]
C3[C3])
[ 21.813270] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef
Cpu1Ist 3000 INTL
20051117)
[ 21.813443] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef
Cpu1Cst 3000 INTL
20051117)
[ 21.813932] ACPI: CPU1 (power states: C1[C1] C2[C2]
C3[C3])
[ 21.815915] ACPI: Thermal Zone [THRM] (70 C)
[ 21.939884] usbcore: registered new interface driver
usbfs
[ 21.939908] usbcore: registered new interface driver
hub
[ 21.940312] usbcore: registered new device driver usb
[ 21.951318] USB Universal Host Controller Interface
driver v3.0
[ 21.951373] ACPI: PCI Interrupt 0000:00:1a.0[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 21.951385] PCI: Setting latency timer of device
0000:00:1a.0 to 64
[ 21.951389] uhci_hcd 0000:00:1a.0: UHCI Host
Controller
[ 21.951635] uhci_hcd 0000:00:1a.0: new USB bus
registered, assigned bus
number 1
[ 21.951668] uhci_hcd 0000:00:1a.0: irq 16, io base
0x0000bc00
[ 21.951804] usb usb1: configuration #1 chosen from 1
choice
[ 21.951827] hub 1-0:1.0: USB hub found
[ 21.951831] hub 1-0:1.0: 2 ports detected
[ 22.055346] ACPI: PCI Interrupt 0000:00:1a.1[B] ->
GSI 21 (level, low) ->
IRQ 19
[ 22.055358] PCI: Setting latency timer of device
0000:00:1a.1 to 64
[ 22.055363] uhci_hcd 0000:00:1a.1: UHCI Host
Controller
[ 22.055384] uhci_hcd 0000:00:1a.1: new USB bus
registered, assigned bus
number 2
[ 22.055415] uhci_hcd 0000:00:1a.1: irq 19, io base
0x0000b880
[ 22.055524] usb usb2: configuration #1 chosen from 1
choice
[ 22.055545] hub 2-0:1.0: USB hub found
[ 22.055550] hub 2-0:1.0: 2 ports detected
[ 22.159314] ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 23 (level, low) ->
IRQ 20
[ 22.159325] PCI: Setting latency timer of device
0000:00:1d.0 to 64
[ 22.159329] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
[ 22.159352] uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus
number 3
[ 22.159383] uhci_hcd 0000:00:1d.0: irq 20, io base
0x0000b800
[ 22.159486] usb usb3: configuration #1 chosen from 1
choice
[ 22.159507] hub 3-0:1.0: USB hub found
[ 22.159512] hub 3-0:1.0: 2 ports detected
[ 22.263245] ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 19 (level, low) ->
IRQ 17
[ 22.263256] PCI: Setting latency timer of device
0000:00:1d.1 to 64
[ 22.263261] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
[ 22.263284] uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus
number 4
[ 22.263317] uhci_hcd 0000:00:1d.1: irq 17, io base
0x0000b480
[ 22.263423] usb usb4: configuration #1 chosen from 1
choice
[ 22.263444] hub 4-0:1.0: USB hub found
[ 22.263449] hub 4-0:1.0: 2 ports detected
[ 22.330515] SCSI subsystem initialized
[ 22.367189] ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 18 (level, low) ->
IRQ 21
[ 22.367200] PCI: Setting latency timer of device
0000:00:1d.2 to 64
[ 22.367204] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
[ 22.367230] uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus
number 5
[ 22.367261] uhci_hcd 0000:00:1d.2: irq 21, io base
0x0000b400
[ 22.367366] usb usb5: configuration #1 chosen from 1
choice
[ 22.367388] hub 5-0:1.0: USB hub found
[ 22.367392] hub 5-0:1.0: 2 ports detected
[ 22.411090] libata version 3.00 loaded.
[ 22.471236] ACPI: PCI Interrupt 0000:00:1a.7[C] ->
GSI 18 (level, low) ->
IRQ 21
[ 22.471249] PCI: Setting latency timer of device
0000:00:1a.7 to 64
[ 22.471253] ehci_hcd 0000:00:1a.7: EHCI Host
Controller
[ 22.471276] ehci_hcd 0000:00:1a.7: new USB bus
registered, assigned bus
number 6
[ 22.475195] ehci_hcd 0000:00:1a.7: debug port 1
[ 22.475202] PCI: cache line size of 32 is not
supported by device
0000:00:1a.7
[ 22.475207] ehci_hcd 0000:00:1a.7: irq 21, io mem
0xf9fffc00
[ 22.491020] ehci_hcd 0000:00:1a.7: USB 2.0 started,
EHCI 1.00, driver 10
Dec 2004
[ 22.491125] usb usb6: configuration #1 chosen from 1
choice
[ 22.491148] hub 6-0:1.0: USB hub found
[ 22.491153] hub 6-0:1.0: 4 ports detected
[ 22.595056] ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 23 (level, low) ->
IRQ 20
[ 22.595070] PCI: Setting latency timer of device
0000:00:1d.7 to 64
[ 22.595073] ehci_hcd 0000:00:1d.7: EHCI Host
Controller
[ 22.595096] ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus
number 7
[ 22.598997] ehci_hcd 0000:00:1d.7: debug port 1
[ 22.599004] PCI: cache line size of 32 is not
supported by device
0000:00:1d.7
[ 22.599010] ehci_hcd 0000:00:1d.7: irq 20, io mem
0xf9fff800
[ 22.610950] ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00, driver 10
Dec 2004
[ 22.611047] usb usb7: configuration #1 chosen from 1
choice
[ 22.611069] hub 7-0:1.0: USB hub found
[ 22.611074] hub 7-0:1.0: 6 ports detected
[ 22.715078] r8169 Gigabit Ethernet driver 2.2LK
loaded
[ 22.715138] ACPI: PCI Interrupt 0000:04:00.0[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 22.715179] PCI: Setting latency timer of device
0000:04:00.0 to 64
[ 22.715717] eth0: RTL8168b/8111b at 0xf8830000,
00:19:db:3b:be:ed, XID
38000000 IRQ 219
[ 22.716805] ACPI: PCI Interrupt 0000:05:04.4[A] ->
GSI 22 (level, low) ->
IRQ 18
[ 22.767580] ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
IRQ=[18]
MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT
contexts=[8/8]
[ 22.770635] ata_piix 0000:00:1f.2: version 2.12
[ 22.770642] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE
IDE ]
[ 22.922821] ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 18 (level, low) ->
IRQ 21
[ 22.922875] PCI: Setting latency timer of device
0000:00:1f.2 to 64
[ 22.922991] scsi0 : ata_piix
[ 22.923140] scsi1 : ata_piix
[ 22.924250] ata1: SATA max UDMA/133 cmd 0x1f0 ctl
0x3f6 bmdma 0xffa0 irq
14
[ 22.924253] ata2: PATA max UDMA/100 cmd 0x170 ctl
0x376 bmdma 0xffa8 irq
15
[ 23.098141] ata1.00: ATA-7: WDC WD1600BEVS-00RST0,
04.01G04, max UDMA/133
[ 23.098147] ata1.00: 312581808 sectors, multi 16:
LBA48 NCQ (depth 0/32)
[ 23.113202] ata1.00: configured for UDMA/133
[ 23.302553] Clocksource tsc unstable (delta =
-6878798318 ns)
[ 23.306526] Time: hpet clocksource has been
installed.
[ 23.328045] ata2.01: ATAPI: Optiarc DVD RW AD-7530A,
EX32, max UDMA/33
[ 23.354158] ata2.01: configured for UDMA/33
[ 23.354344] scsi 0:0:0:0: Direct-Access ATA
WDC WD1600BEVS-0 04.0
PQ: 0 ANSI: 5
[ 23.355113] scsi 1:0:1:0: CD-ROM Optiarc
DVD RW AD-7530A EX32
PQ: 0 ANSI: 5
[ 23.368847] Driver 'sd' needs updating - please use
bus_type methods
[ 23.368918] sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042
MB)
[ 23.368929] sd 0:0:0:0: [sda] Write Protect is off
[ 23.368931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.368947] sd 0:0:0:0: [sda] Write cache: enabled,
read cache: enabled,
doesn't support DPO or FUA
[ 23.368993] sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042
MB)
[ 23.369003] sd 0:0:0:0: [sda] Write Protect is off
[ 23.369005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.369020] sd 0:0:0:0: [sda] Write cache: enabled,
read cache: enabled,
doesn't support DPO or FUA
[ 23.369023] sda:<4>Driver 'sr' needs updating -
please use bus_type
methods
[ 23.415480] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 23.446703] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.450888] sd 0:0:0:0: Attached scsi generic sg0
type 0
[ 23.450906] sr 1:0:1:0: Attached scsi generic sg1
type 5
[ 23.452708] sr0: scsi3-mmc drive: 62x/62x writer
dvd-ram cd/rw xa/form2
cdda tray
[ 23.452712] Uniform CD-ROM driver Revision: 3.20
[ 23.452753] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 23.770852] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00dc10003a871c01]
[ 24.045249] Attempting manual resume
[ 24.045252] swsusp: Resume From Partition 8:5
[ 24.045253] PM: Checking swsusp image.
[ 24.045494] PM: Resume from disk failed.
[ 24.082561] kjournald starting. Commit interval 5
seconds
[ 24.082594] EXT3-fs: mounted filesystem with ordered
data mode.
[ 33.321132] input: PC Speaker as
/devices/platform/pcspkr/input/input2
[ 33.505716] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
[ 33.557660] shpchp: Standard Hot Plug PCI Controller
Driver version: 0.4
[ 33.571485] iTCO_vendor_support: vendor-support=0
[ 33.607802] iTCO_wdt: Intel TCO WatchDog Timer Driver
v1.02 (26-Jul-2007)
[ 33.607891] iTCO_wdt: Found a ICH8M TCO device
(Version=2,
TCOBASE=0x0860)
[ 33.607930] iTCO_wdt: initialized. heartbeat=30 sec
(nowayout=0)
[ 33.649555] Linux agpgart interface v0.102
[ 33.849692] input: Power Button (FF) as
/devices/virtual/input/input3
[ 33.901396] ACPI: Power Button (FF) [PWRF]
[ 33.901470] input: Lid Switch as
/devices/virtual/input/input4
[ 33.933788] ACPI: Lid Switch [LID0]
[ 33.933854] input: Power Button (CM) as
/devices/virtual/input/input5
[ 33.965359] ACPI: Power Button (CM) [PWRB]
[ 34.272012] Synaptics Touchpad, model: 1, fw: 6.1,
id: 0xa3a0b3, caps:
0xa04713/0x10008
[ 34.301818] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input6
[ 34.451012] Yenta: CardBus bridge found at
0000:05:04.0 [1462:3fe9]
[ 34.451039] Yenta O2: res at 0x94/0xD4: 00/ea
[ 34.451041] Yenta O2: enabling read prefetch/write
burst
[ 34.577975] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
[ 34.577980] Socket status: 30000006
[ 34.577982] Yenta: Raising subordinate bus# of parent
bus (#05) from #06
to #09
[ 34.577987] pcmcia: parent PCI bridge I/O window:
0xe000 - 0xefff
[ 34.577990] cs: IO port probe 0xe000-0xefff: clean.
[ 34.578227] pcmcia: parent PCI bridge Memory window:
0xfe300000 -
0xfebfffff
[ 34.578229] pcmcia: parent PCI bridge Memory window:
0xf7000000 -
0xf8ffffff
[ 34.665095] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 34.716933] ACPI: Video Device [NVGA] (multi-head:
yes rom: no post: no)
[ 34.765699] ACPI: AC Adapter [ADP1] (on-line)
[ 34.806178] ACPI: Battery Slot [BAT1] (battery
absent)
[ 34.823095] sdhci: Secure Digital Host Controller
Interface driver
[ 34.823098] sdhci: Copyright(c) Pierre Ossman
[ 34.823139] sdhci: SDHCI controller found at
0000:05:04.2 [1217:7120]
(rev 2)
[ 34.823171] ACPI: PCI Interrupt 0000:05:04.2[A] ->
GSI 22 (level, low) ->
IRQ 18
[ 34.823197] sdhci:slot0: Unknown controller version
(2). You may
experience problems.
[ 34.823244] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA
[ 34.922456] mmc0: new high speed SD card at address
b368
[ 34.934879] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG
Network Connection
driver for Linux, 1.2.0
[ 34.934883] iwl3945: Copyright(c) 2003-2007 Intel
Corporation
[ 34.934990] ACPI: PCI Interrupt 0000:03:00.0[A] ->
GSI 19 (level, low) ->
IRQ 17
[ 34.935011] PCI: Setting latency timer of device
0000:03:00.0 to 64
[ 34.935036] iwl3945: Detected Intel PRO/Wireless
3945ABG Network
Connection
[ 35.028843] nvidia: module license 'NVIDIA' taints
kernel.
[ 35.576244] mmcblk0: mmc0:b368 SMI 124160KiB (ro)
[ 35.576274] mmcblk0: unknown partition table
[ 35.615497] ACPI: PCI Interrupt 0000:01:00.0[A] ->
GSI 16 (level, low) ->
IRQ 16
[ 35.615511] PCI: Setting latency timer of device
0000:01:00.0 to 64
[ 35.615606] NVRM: loading NVIDIA UNIX x86 Kernel
Module 169.12 Thu Feb
14 17:53:07 PST 2008
[ 35.636435] ACPI: PCI Interrupt 0000:00:1b.0[A] ->
GSI 21 (level, low) ->
IRQ 19
[ 35.636458] PCI: Setting latency timer of device
0000:00:1b.0 to 64
[ 35.671496] hda_codec: Unknown model for ALC883,
trying auto-probe from
BIOS...
[ 35.726548] iwl3945: Tunable channels: 13 802.11bg,
23 802.11a channels
[ 35.726896] wmaster0: Selected rate control algorithm
'iwl-3945-rs'
[ 35.889240] cs: IO port probe 0x100-0x3af: clean.
[ 35.891358] cs: IO port probe 0x3e0-0x4ff: clean.
[ 35.892157] cs: IO port probe 0x820-0x8ff: clean.
[ 35.892589] cs: IO port probe 0xc00-0xcf7: clean.
[ 35.893485] cs: IO port probe 0xa00-0xaff: clean.
[ 36.062948] lp: driver loaded but no devices found
[ 36.179397] Adding 4198396k swap on /dev/sda5.
Priority:-1 extents:1
across:4198396k
[ 36.556474] EXT3 FS on sda7, internal journal
[ 37.276515] ip_tables: (C) 2000-2006 Netfilter Core
Team
[ 37.650299] No dock devices found.
[ 38.714757] apm: BIOS not found.
[ 38.846150] ppdev: user-space parallel port driver
[ 38.975232] audit(1216384444.768:2): type=1503
operation="inode_permission" requested_mask="a::"
denied_mask="a::"
name="/dev/tty" pid=5123 profile="/usr/sbin/cupsd"
namespace="default"
[ 40.218107] r8169: eth0: link down
[ 40.392586] Bluetooth: Core ver 2.11
[ 40.394532] NET: Registered protocol family 31
[ 40.394540] Bluetooth: HCI device and connection
manager initialized
[ 40.394547] Bluetooth: HCI socket layer initialized
[ 40.470328] Bluetooth: L2CAP ver 2.9
[ 40.470333] Bluetooth: L2CAP socket layer initialized
[ 40.537178] Bluetooth: RFCOMM socket layer
initialized
[ 40.537201] Bluetooth: RFCOMM TTY layer initialized
[ 40.537205] Bluetooth: RFCOMM ver 1.8
[ 48.992843] NET: Registered protocol family 10
[ 48.993757] lo: Disabled Privacy Extensions
[ 48.994909] ADDRCONF(NETDEV_UP): eth0: link is not
ready
[ 48.996215] ADDRCONF(NETDEV_UP): wlan0: link is not
ready
[ 55.503865] CPU0 attaching NULL sched-domain.
[ 55.503876] CPU1 attaching NULL sched-domain.
[ 55.513735] CPU0 attaching sched-domain:
[ 55.513744] domain 0: span 03
[ 55.513748] groups: 01 02
[ 55.513755] CPU1 attaching sched-domain:
[ 55.513759] domain 0: span 03
[ 55.513762] groups: 02 01
[ 56.974381] NET: Registered protocol family 17
[ 59.233273] UDF-fs: Partition marked readonly;
forcing readonly mount
[ 59.267581] UDF-fs INFO UDF 0.9.8.1 (2004/29/09)
Mounting volume
'SMOTRI_PERVIM', timestamp 2008/06/25 23:49 (10f0)
[ 62.990568] ADDRCONF(NETDEV_UP): wlan0: link is not
ready
--------------------------------------
On Fri, 18 Jul 2008 08:06:17 -0400
"Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
Roan
The ALSA version is read from the COMMAND:
$ aplay --version
with aplay itself includes in the alsa-utils package,
This is separate from the alsa-drivers+alsa-lib update
to 1.0.17 which you
did,
hence the 1.0.16 from /proc/asound/version.
If you run scanModem again, I expect it will report
1.0.16
With respect to the continuing failure to detect the
modem, please do
$ cat /proc/interrupts >> roan.txt
$ dmesg >> roan.txt
and send us the roan.txt which will have the bootup
diagnostics.
They may reveal further resources that may we be able to
free up.
MarvS
On Fri, Jul 18, 2008 at 5:36 AM, roan <roan@xxxxxxxx>
wrote:
btw, command cat /proc/asound/version still gives 1.0.16
version, but
compiled today. but i compiled today 1.0.17 version
----
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.16.
Compiled on Jun 18 2008 for kernel 2.6.24-19-generic
(SMP).
----
and scanModem says even 1.0.15 version of ALSA
On Wed, 16 Jul 2008 19:38:20 -0400
"Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
Roan,
Follow
Instructions for upgrading snd-hda-intel and its
dependent driver set
are at:
http://linmodems.technion.ac.il/archive-seventh/msg00282.htm
Upgrade to ALSA version 1.0.16. This has solved
problems comparable
to yours on other System.
Reboot
Recheck the
$ cat /proc/asound/pcm
MarvS
On Wed, Jul 16, 2008 at 12:48 PM, roan <roan@xxxxxxxx>
wrote:
yes, audio is working
On Wed, 16 Jul 2008 10:55:58 -0400
"Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
Roan
Is audio working
MarvS
On Wed, Jul 16, 2008 at 10:21 AM, roan <roan@xxxxxxxx>
wrote:
it seems that blacklisting didn't help
$ sudo cat /proc/asound/pcm still says the same:
---------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 :
capture 1
---------------
On Mon, 14 Jul 2008 08:06:10 -0400
"Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
Roan
$ sudo cat /proc/asound/pcm
The sudo probably isn't necessary.
More later. Regulat job now
MarvS
On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx>
wrote:
first of all i can say that the modem is working with
kernel 2.6.21
but i didn't succeed to make it work under my 2.6.24-19
downloaded agrsm-20080626.tar.gz
tried to make install, but it says that some needed
files are
missing.
don't
know which ones :(
on another hand i blacklisted this list of modules you
sent me in
file
/etc/modeprobe.d/blacklist
------
scsi_mod
ehci_hcd
uhci_hcd
usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd
shpchp 34452 0
pci_hotplug 30880 1 shpchp
pcspkr 4224 0
sr_mod 17956 1
cdrom 37408 1 sr_mod
sd_mod 30720 4
pcmcia_core
uvcvideo 58116 0
iwl3945 89844 0
compat_ioctl32 2304 1 uvcvideo
iwlwifi_mac80211 219108 1 iwl3945
videodev 29440 1 uvcvideo
v4l1_compat 15492 2 uvcvideo,videodev
v4l2_common 18304 2 uvcvideo,videodev
video 19856 8
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
snd_atiixp_modem 17672 0
snd_via82xx_modem 16392 0
snd_intel8x0m
------
but nothing changed: the $ /proc/asound/pcm still says
"permission
denied"
or when i do it with sudo it says " no such file..."
so please tell me what i need to do to make modem
working on
2.6.24-19
kernel?
thx in advance
On Sat, 12 Jul 2008 09:41:01 -0400
"Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
Bjorn,
Would you please work with Roan, to get his
CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc
version 4.2
with
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1462:3fe9 Audio
device: Intel
Corporation 82801H
having the 11c11040 Agere chip on Subsystem 1462:3fe9
Modem interrupt assignment and sharing:
21: 407 392 IO-APIC-fasteoi
uhci_hcd:usb4, HDA
Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] ->
GSI 21
(level,
low) -> IRQ 21
[ 34.842316] PCI: Setting latency timer of device
0000:00:1b.0
to
64
The ALSA verion is 1.0.15
The /proc/asound/pcm file reports:
-----------------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 :
capture 1
---------------
but there is no expected Modem line, like
00-06: Something Modem
so there is probably a resource conflict to be dealt
with and/or
an
ALSA version upgradeto 1.0.16 may be necessary.
Roan
Detach any external devices which are not Essential (USB
and
PCMCIA
etc.).
or you can disable the usage through an edit in:
$ sudo gedit /etc/discover.conf
Of course you must retain ide and pci services
You can also less globally blacklist non-essential
modules, to
free
up
resources.
See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html
on blacklisting guidance.
Modules non essential on your System for dialup include:
scsi_mod needed for USB drivers
ehci_hcd USB2
uhci_hcd other USB
usbcore 146028 5
uvcvideo,usbhid,ehci_hcd,uhci_hcd
shpchp 34452 0
pci_hotplug 30880 1 shpchp
pcspkr 4224 0
sr_mod 17956 1
cdrom 37408 1 sr_mod
sd_mod 30720 4
pcmcia_core
uvcvideo 58116 0
iwl3945 89844 0
compat_ioctl32 2304 1 uvcvideo
iwlwifi_mac80211 219108 1 iwl3945
videodev 29440 1 uvcvideo
v4l1_compat 15492 2 uvcvideo,videodev
v4l2_common 18304 2 uvcvideo,videodev
video 19856 8
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
snd_atiixp_modem 17672 0
snd_via82xx_modem 16392 0
snd_intel8x0m modem driver also, not for your
HDA system
Then after a reboot, do
$ /proc/asound/pcm
to assess if a modem line is present.
Another fast thing you can try is from
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
get the
agrsm_howto.txt and the
linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb
which already includes agrmodem + agrserial drivers.
Install
with:
$ sudo dpkg -i linux-image*.deb
Then reboot under the new 2.6.21.0-22 kernel and run
through the
tests
described in agrsm_howto.txt, except compiling & driver
installation
is already done.
While lacking this modem hardware,
linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not
cause any
problems on my otherwise Ubuntu system. It is Debian
repackaging
of
the Fedora like kernel-2.6.21.0-22.i686.rpm , which I
did.
Joern will direct you with respect to further getting
service
under
2.6.24 kernels.
The current Mandiva Linux release with 2.4.26 kernels
does have a
package
dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm supporting the
11c11040
chip
modem.
MarvS
On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx>
wrote:
from the driver information i found out that the device
is 1040
there is ven=11c1 and dev=1040
here is the info from lsmod and dmesg
==========
Module Size Used by
arc4 2944 2
ecb 4480 2
blkcipher 8324 1 ecb
nls_iso8859_1 4992 1
nls_cp437 6656 1
isofs 36388 1
vfat 14464 1
fat 54556 1 vfat
udf 88612 0
af_packet 23812 6
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ipv6 267780 14
ppdev 10372 0
snd_atiixp_modem 17672 0
snd_via82xx_modem 16392 0
snd_intel8x0m 19084 0
snd_ac97_codec 101156 3
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m
ac97_bus 3072 1 snd_ac97_codec
acpi_cpufreq 10796 1
cpufreq_stats 7104 0
cpufreq_conservative 8712 0
cpufreq_ondemand 9740 1
freq_table 5536 3
acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 5284 0
cpufreq_powersave 2688 0
sbs 15112 0
sbshc 7680 1 sbs
container 5632 0
dock 11280 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
coretemp 8448 0
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
snd_hda_intel 351908 3
snd_pcm_oss 42528 0
snd_mixer_oss 18048 1 snd_pcm_oss
snd_pcm 78852 6
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss
snd_page_alloc 11656 5
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
snd_hwdep 10628 1 snd_hda_intel
joydev 13120 0
mmc_block 14980 1
snd_seq_dummy 4996 0
pcmcia 40876 0
snd_seq_oss 35456 0
snd_seq_midi 9504 0
snd_rawmidi 25888 1 snd_seq_midi
uvcvideo 58116 0
iwl3945 89844 0
snd_seq_midi_event 8576 2 snd_seq_oss,snd_seq_midi
compat_ioctl32 2304 1 uvcvideo
iwlwifi_mac80211 219108 1 iwl3945
snd_seq 54096 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
nvidia 7825536 36
videodev 29440 1 uvcvideo
v4l1_compat 15492 2 uvcvideo,videodev
v4l2_common 18304 2 uvcvideo,videodev
video 19856 8
psmouse 40336 0
ac 6916 0
sdhci 19076 0
battery 14212 0
snd_timer 24964 2 snd_pcm,snd_seq
cfg80211 15112 1 iwlwifi_mac80211
i2c_core 24832 1 nvidia
output 4736 1 video
serio_raw 7940 0
mmc_core 51460 2 mmc_block,sdhci
snd_seq_device 9740 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 27276 1
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 40596 3
pcmcia,yenta_socket,rsrc_nonstatic
snd 56996 21
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
evdev 13056 6
button 9232 0
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
intel_agp 25492 0
agpgart 34760 2 nvidia,intel_agp
soundcore 8800 1 snd
shpchp 34452 0
pci_hotplug 30880 1 shpchp
pcspkr 4224 0
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 1
cdrom 37408 1 sr_mod
sd_mod 30720 4
ata_generic 8324 0
pata_acpi 8320 0
usbhid 31872 0
hid 38784 1 usbhid
ohci1394 33584 0
ata_piix 19588 4
ieee1394 93752 2 sbp2,ohci1394
r8169 32900 0
libata 159344 3
ata_generic,pata_acpi,ata_piix
scsi_mod 151436 5
sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 5
uvcvideo,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 4 acpi_cpufreq,thermal
fan 5636 0
fuse 50580 5
vesafb 8964 1
fbcon 42912 72
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic
(buildd@terranova)
(gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28
20:27:26
UTC
2008
(Ubuntu 2.6.24-18.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00
(usable)
[ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 -
0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 -
000000007ffb0000
(usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 -
000000007ffbe000
(ACPI
data)
[ 0.000000] BIOS-e820: 000000007ffbe000 -
000000007fff0000
(ACPI
NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 -
0000000080000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 -
00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 -
0000000100000000
(reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524208) 0
entries
of
256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524208
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524208
[ 0.000000] On node 0 totalpages: 524208
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO
batch:31
[ 0.000000] HighMem zone: 2303 pages used for
memmap
[ 0.000000] HighMem zone: 292529 pages, LIFO
batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F84A0
checksum 0
[ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB
MEGABOOK
20070517
MSFT
97)
[ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707
FACP1702
20070517
MSFT
97)
[ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636
M1636000
0
INTL
20051117)
[ 0.000000] ACPI: FACS 7FFBE000, 0040
[ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707
APIC1702
20070517
MSFT
97)
[ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707
OEMMCFG
20070517
MSFT
97)
[ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB
MEGABOOK
20070517
MSFT
97)
[ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707
OEMB1702
20070517
MSFT
97)
[ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707
OEMHPET
20070517
MSFT
97)
[ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef
CpuPm
3000
INTL
20051117)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01]
enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000]
gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address
0xfec00000,
GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2
dfl
dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9
high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O
APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base:
0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration
information
[ 0.000000] Allocating PCI resources starting at
88000000
(gap:
80000000:7ee00000)
[ 0.000000] swsusp: Registered nosave memory region:
000000000009f000
-
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000a0000
-
00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000e0000
-
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility
grouping
on.
Total
pages: 520113
[ 0.000000] Kernel command line:
root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash
vga=789
quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore...
done.
[ 0.000000] Enabling unmasked SIMD FPU exception
support...
done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12,
16384
bytes)
[ 0.000000] Detected 1795.565 MHz processor.
[ 24.138347] Console: colour dummy device 80x25
[ 24.138350] console [tty0] enabled
[ 24.138603] Dentry cache hash table entries: 131072
(order: 7,
524288
bytes)
[ 24.138876] Inode-cache hash table entries: 65536
(order: 6,
262144
bytes)
[ 24.226903] Memory: 2066816k/2096832k available
(2176k kernel
code,
28700k reserved, 1006k data, 368k init, 1179328k
highmem)
[ 24.226909] virtual kernel memory layout:
[ 24.226910] fixmap : 0xfff4b000 - 0xfffff000 (
720 kB)
[ 24.226911] pkmap : 0xff800000 - 0xffc00000
(4096 kB)
[ 24.226912] vmalloc : 0xf8800000 - 0xff7fe000 (
111 MB)
[ 24.226913] lowmem : 0xc0000000 - 0xf8000000 (
896 MB)
[ 24.226914] .init : 0xc0421000 - 0xc047d000 (
368 kB)
[ 24.226915] .data : 0xc03201f4 - 0xc041bdc4
(1006 kB)
[ 24.226916] .text : 0xc0100000 - 0xc03201f4
(2176 kB)
[ 24.226919] Checking if this processor honours the WP
bit even
in
supervisor mode... Ok.
[ 24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1,
MinObjects=4,
CPUs=2, Nodes=1
[ 24.227097] hpet clockevent registered
[ 24.307060] Calibrating delay using timer specific
routine..
3595.17
BogoMIPS (lpj=7190350)
[ 24.307082] Security Framework initialized
[ 24.307088] SELinux: Disabled at boot.
[ 24.307100] AppArmor: AppArmor initialized
[ 24.307103] Failure registering capabilities with
primary
security
module.
[ 24.307111] Mount-cache hash table entries: 512
[ 24.307223] Initializing cgroup subsys ns
[ 24.307228] Initializing cgroup subsys cpuacct
[ 24.307237] CPU: After generic identify, caps:
bfebfbff
20100000
00000000
00000000 0000e3bd 00000000 00000001 00000000
[ 24.307244] monitor/mwait feature present.
[ 24.307246] using mwait in idle threads.
[ 24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.307252] CPU: L2 cache: 2048K
[ 24.307254] CPU: Physical Processor ID: 0
[ 24.307255] CPU: Processor Core ID: 0
[ 24.307257] CPU: After all inits, caps: bfebfbff
20100000
00000000
00003940 0000e3bd 00000000 00000001 00000000
[ 24.307266] Compat vDSO mapped to ffffe000.
[ 24.307278] Checking 'hlt' instruction... OK.
[ 24.323404] SMP alternatives: switching to UP code
[ 24.324901] Early unpacking initramfs... done
[ 24.643306] ACPI: Core revision 20070126
[ 24.643345] ACPI: Looking for DSDT in initramfs...
error, file
/DSDT.aml
not found.
[ 24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU T7100
@ 1.80GHz
stepping
0d
[ 24.645818] SMP alternatives: switching to SMP code
[ 24.646454] Booting processor 1/1 eip 3000
[ 24.656641] Initializing CPU#1
[ 24.734815] Calibrating delay using timer specific
routine..
3590.98
BogoMIPS (lpj=7181974)
[ 24.734821] CPU: After generic identify, caps:
bfebfbff
20100000
00000000
00000000 0000e3bd 00000000 00000001 00000000
[ 24.734826] monitor/mwait feature present.
[ 24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.734830] CPU: L2 cache: 2048K
[ 24.734832] CPU: Physical Processor ID: 0
[ 24.734833] CPU: Processor Core ID: 1
[ 24.734835] CPU: After all inits, caps: bfebfbff
20100000
00000000
00003940 0000e3bd 00000000 00000001 00000000
[ 24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU T7100
@ 1.80GHz
stepping
0d
[ 24.735413] Total of 2 processors activated (7186.16
BogoMIPS).
[ 24.735588] ENABLING IO-APIC IRQs
[ 24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2
apic2=-1
pin2=-1
[ 24.882841] checking TSC synchronization [CPU#0 ->
CPU#1]:
passed.
[ 24.902845] Brought up 2 CPUs
[ 24.902867] CPU0 attaching sched-domain:
[ 24.902869] domain 0: span 03
[ 24.902871] groups: 01 02
[ 24.902874] CPU1 attaching sched-domain:
[ 24.902875] domain 0: span 03
[ 24.902877] groups: 02 01
[ 24.903074] net_namespace: 64 bytes
[ 24.903085] Booting paravirtualized kernel on bare
hardware
[ 24.903524] Time: 14:55:42 Date: 07/12/08
[ 24.903549] NET: Registered protocol family 16
[ 24.903721] EISA bus registered
[ 24.903725] ACPI: bus type pci registered
[ 24.903966] PCI: PCI BIOS revision 3.00 entry at
0xf0031, last
bus=6
[ 24.903968] PCI: Using configuration type 1
[ 24.903970] Setting up standard PCI resources
[ 24.912870] ACPI: EC: Look up EC in DSDT
[ 24.915987] ACPI: Interpreter enabled
[ 24.915990] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.916005] ACPI: Using IOAPIC for interrupt routing
[ 24.916251] Error attaching device data
[ 24.916288] Error attaching device data
[ 24.918045] ACPI: EC: non-query interrupt received,
switching
to
interrupt mode
[ 24.922776] ACPI: EC: GPE = 0x17, I/O: command/status
= 0x66,
data
=
0x62
[ 24.922779] ACPI: EC: driver started in interrupt
mode
[ 24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.923832] PCI quirk: region 0800-087f claimed by
ICH6
ACPI/GPIO/TCO
[ 24.923836] PCI quirk: region 0500-053f claimed by
ICH6 GPIO
[ 24.925529] PCI: Transparent bridge - 0000:00:1e.0
[ 24.925622] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
[ 24.925751] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P2._PRT]
[ 24.925830] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P1._PRT]
[ 24.925930] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P7._PRT]
[ 24.926006] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0P8._PRT]
[ 24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4
5 6 7
*10
11
12
14
15)
[ 24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4
5 6 7 10
11
12
14
15) *0, disabled.
[ 24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3
4 5 6 7
10
11
12
14
15)
[ 24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4
5 6 7 10
*11
12
14
15)
[ 24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4
5 6 7 10
11
12
14
15) *0, disabled.
[ 24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4
*5 6 7
10
11
12
14
15)
[ 24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3
*4 5 6 7
10
11
12
14
15)
[ 24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4
5 6 *7
10
11
12
14
15)
[ 24.938649] Linux Plug and Play Support v0.97 (c)
Adam Belay
[ 24.938676] pnp: PnP ACPI init
[ 24.938683] ACPI: bus type pnp registered
[ 24.940724] pnp: PnP ACPI: found 13 devices
[ 24.940726] ACPI: ACPI bus type pnp unregistered
[ 24.940730] PnPBIOS: Disabled by ACPI PNP
[ 24.940928] PCI: Using ACPI for IRQ routing
[ 24.940931] PCI: If a device doesn't work, try
"pci=routeirq".
If
it
helps, post a report
[ 24.994683] NET: Registered protocol family 8
[ 24.994685] NET: Registered protocol family 20
[ 24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.994720] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.995752] AppArmor: AppArmor Filesystem Enabled
[ 24.998674] Time: tsc clocksource has been installed.
[ 24.998681] Switched to high resolution mode on CPU 0
[ 24.998786] Switched to high resolution mode on CPU 1
[ 25.014660] system 00:01: iomem range
0xfed14000-0xfed19fff
has
been
reserved
[ 25.014670] system 00:08: ioport range 0x400-0x41f
has been
reserved
[ 25.014672] system 00:08: ioport range 0x4d0-0x4d1
has been
reserved
[ 25.014674] system 00:08: ioport range 0x800-0x87f
has been
reserved
[ 25.014677] system 00:08: ioport range 0x500-0x53f
has been
reserved
[ 25.014679] system 00:08: iomem range
0xfed1c000-0xfed1ffff
has
been
reserved
[ 25.014682] system 00:08: iomem range
0xfed20000-0xfed3ffff
has
been
reserved
[ 25.014684] system 00:08: iomem range
0xfed40000-0xfed8ffff
has
been
reserved
[ 25.014690] system 00:0a: iomem range
0xfec00000-0xfec00fff
has
been
reserved
[ 25.014693] system 00:0a: iomem range
0xfee00000-0xfee00fff
could
not
be
reserved
[ 25.014698] system 00:0b: iomem range
0xe0000000-0xefffffff
has
been
reserved
[ 25.014703] system 00:0c: iomem range 0x0-0x9ffff
could not be
reserved
[ 25.014706] system 00:0c: iomem range 0xc0000-0xcffff
could
not
be
reserved
[ 25.014708] system 00:0c: iomem range 0xe0000-0xfffff
could
not
be
reserved
[ 25.014711] system 00:0c: iomem range
0x100000-0x7fffffff
could
not
be
reserved
[ 25.014713] system 00:0c: iomem range
0xfed90000-0xffffffff
could
not
be
reserved
[ 25.045096] PCI: Bridge: 0000:00:01.0
[ 25.045099] IO window: c000-cfff
[ 25.045102] MEM window: fa000000-fe0fffff
[ 25.045105] PREFETCH window: d0000000-dfffffff
[ 25.045109] PCI: Bridge: 0000:00:1c.0
[ 25.045110] IO window: disabled.
[ 25.045116] MEM window: disabled.
[ 25.045120] PREFETCH window: disabled.
[ 25.045126] PCI: Bridge: 0000:00:1c.3
[ 25.045127] IO window: disabled.
[ 25.045133] MEM window: fe100000-fe1fffff
[ 25.045137] PREFETCH window: disabled.
[ 25.045143] PCI: Bridge: 0000:00:1c.4
[ 25.045145] IO window: d000-dfff
[ 25.045151] MEM window: fe200000-fe2fffff
[ 25.045156] PREFETCH window: disabled.
[ 25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[ 25.045171] IO window: 0000e000-0000e0ff
[ 25.045175] IO window: 0000e400-0000e4ff
[ 25.045180] PREFETCH window: 88000000-8bffffff
[ 25.045185] MEM window: 8c000000-8fffffff
[ 25.045190] PCI: Bridge: 0000:00:1e.0
[ 25.045193] IO window: e000-efff
[ 25.045199] MEM window: fe300000-febfffff
[ 25.045204] PREFETCH window: f7000000-f8ffffff
[ 25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] ->
GSI 16
(level,
low)
->
IRQ 16
[ 25.045225] PCI: Setting latency timer of device
0000:00:01.0
to
64
[ 25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] ->
GSI 16
(level,
low)
->
IRQ 16
[ 25.045255] PCI: Setting latency timer of device
0000:00:1c.0
to
64
[ 25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] ->
GSI 19
(level,
low)
->
IRQ 17
[ 25.045285] PCI: Setting latency timer of device
0000:00:1c.3
to
64
[ 25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] ->
GSI 16
(level,
low)
->
IRQ 16
[ 25.045315] PCI: Setting latency timer of device
0000:00:1c.4
to
64
[ 25.045329] PCI: Setting latency timer of device
0000:00:1e.0
to
64
[ 25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] ->
GSI 22
(level,
low)
->
IRQ 18
[ 25.045360] NET: Registered protocol family 2
[ 25.082645] IP route cache hash table entries: 32768
(order:
5,
131072
bytes)
[ 25.082845] TCP established hash table entries:
131072 (order:
8,
1048576
bytes)
[ 25.083237] TCP bind hash table entries: 65536
(order: 7,
524288
bytes)
[ 25.083430] TCP: Hash tables configured (established
131072
bind
65536)
[ 25.083432] TCP reno registered
[ 25.094708] checking if image is initramfs... it is
[ 25.722077] Freeing initrd memory: 7319k freed
[ 25.722788] audit: initializing netlink socket
(disabled)
[ 25.722801] audit(1215874543.369:1): initialized
[ 25.722995] highmem bounce pool size: 64 pages
[ 25.724776] VFS: Disk quotas dquot_6.5.1
[ 25.724842] Dquot-cache hash table entries: 1024
(order 0,
4096
bytes)
[ 25.724962] io scheduler noop registered
[ 25.724964] io scheduler anticipatory registered
[ 25.724965] io scheduler deadline registered
[ 25.724978] io scheduler cfq registered (default)
[ 25.725110] Boot video device is 0000:01:00.0
[ 25.725211] PCI: Setting latency timer of device
0000:00:01.0
to
64
[ 25.725249] assign_interrupt_mode Found MSI
capability
[ 25.725279] Allocate Port
Service[0000:00:01.0:pcie00]
[ 25.725312] Allocate Port
Service[0000:00:01.0:pcie02]
[ 25.725388] PCI: Setting latency timer of device
0000:00:1c.0
to
64
[ 25.725449] assign_interrupt_mode Found MSI
capability
[ 25.725497] Allocate Port
Service[0000:00:1c.0:pcie00]
[ 25.725526] Allocate Port
Service[0000:00:1c.0:pcie02]
[ 25.725626] PCI: Setting latency timer of device
0000:00:1c.3
to
64
[ 25.725687] assign_interrupt_mode Found MSI
capability
[ 25.725734] Allocate Port
Service[0000:00:1c.3:pcie00]
[ 25.725764] Allocate Port
Service[0000:00:1c.3:pcie02]
[ 25.725864] PCI: Setting latency timer of device
0000:00:1c.4
to
64
[ 25.725924] assign_interrupt_mode Found MSI
capability
[ 25.725972] Allocate Port
Service[0000:00:1c.4:pcie00]
[ 25.726003] Allocate Port
Service[0000:00:1c.4:pcie02]
[ 25.726246] isapnp: Scanning for PnP cards...
[ 26.081376] isapnp: No Plug & Play device found
[ 26.104263] Real Time Clock Driver v1.12ac
[ 26.104422] hpet_resources: 0xfed00000 is busy
[ 26.104462] Serial: 8250/16550 driver $Revision: 1.90
$ 4
ports,
IRQ
sharing enabled
[ 26.105578] RAMDISK driver initialized: 16 RAM disks
of 65536K
size
1024
blocksize
[ 26.105638] input: Macintosh mouse button emulation
as
/devices/virtual/input/input0
[ 26.105728] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M]
at
0x60,0x64
irq 1,12
[ 26.106070] i8042.c: Detected active multiplexing
controller,
rev
1.1.
[ 26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq
12
[ 26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq
12
[ 26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq
12
[ 26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq
12
[ 26.134091] mice: PS/2 mouse device common for all
mice
[ 26.134193] EISA: Probing bus 0 at eisa.0
[ 26.134231] EISA: Detected 0 cards.
[ 26.134234] cpuidle: using governor ladder
[ 26.134235] cpuidle: using governor menu
[ 26.134311] NET: Registered protocol family 1
[ 26.134336] Using IPI No-Shortcut mode
[ 26.134361] registered taskstats version 1
[ 26.134462] Magic number: 0:283:940
[ 26.134491] hash matches device ptyyb
[ 26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0
devices
found
[ 26.134527] EDD information not available.
[ 26.134709] Freeing unused kernel memory: 368k freed
[ 26.137228] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 26.228218] vesafb: framebuffer at 0xfb000000, mapped
to
0xf8880000,
using 3750k, total 14336k
[ 26.228221] vesafb: mode is 800x600x32,
linelength=3200,
pages=1
[ 26.228223] vesafb: protected mode interface info at
c000:b230
[ 26.228226] vesafb: pmi: set display start =
c00cb293, set
palette
=
c00cb2ee
[ 26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1
3c4 3c5
3c6
3c7
3c8
3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 26.228240] vesafb: scrolling: redraw
[ 26.228242] vesafb: Truecolor: size=8:8:8:8,
shift=24:16:8:0
[ 26.228336] Console: switching to colour frame buffer
device
100x37
[ 26.257461] fb0: VESA VGA frame buffer device
[ 27.394531] fuse init (API version 7.9)
[ 27.413176] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef
Cpu0Ist
3000
INTL
20051117)
[ 27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef
Cpu0Cst
3001
INTL
20051117)
[ 27.413641] Monitor-Mwait will be used to enter C-1
state
[ 27.413644] Monitor-Mwait will be used to enter C-2
state
[ 27.413646] Monitor-Mwait will be used to enter C-3
state
[ 27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2]
C3[C3])
[ 27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef
Cpu1Ist
3000
INTL
20051117)
[ 27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef
Cpu1Cst
3000
INTL
20051117)
[ 27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2]
C3[C3])
[ 27.416854] ACPI: Thermal Zone [THRM] (67 C)
[ 27.722830] usbcore: registered new interface driver
usbfs
[ 27.722854] usbcore: registered new interface driver
hub
[ 27.722880] usbcore: registered new device driver usb
[ 27.734151] USB Universal Host Controller Interface
driver
v3.0
[ 27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] ->
GSI 16
(level,
low)
->
IRQ 16
[ 27.734213] PCI: Setting latency timer of device
0000:00:1a.0
to
64
[ 27.734217] uhci_hcd 0000:00:1a.0: UHCI Host
Controller
[ 27.734416] uhci_hcd 0000:00:1a.0: new USB bus
registered,
assigned
bus
number 1
[ 27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base
0x0000bc00
[ 27.734574] usb usb1: configuration #1 chosen from 1
choice
[ 27.734596] hub 1-0:1.0: USB hub found
[ 27.734600] hub 1-0:1.0: 2 ports detected
[ 27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] ->
GSI 21
(level,
low)
->
IRQ 19
[ 27.838155] PCI: Setting latency timer of device
0000:00:1a.1
to
64
[ 27.838160] uhci_hcd 0000:00:1a.1: UHCI Host
Controller
[ 27.838183] uhci_hcd 0000:00:1a.1: new USB bus
registered,
assigned
bus
number 2
[ 27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base
0x0000b880
[ 27.838318] usb usb2: configuration #1 chosen from 1
choice
[ 27.838340] hub 2-0:1.0: USB hub found
[ 27.838345] hub 2-0:1.0: 2 ports detected
[ 27.845899] SCSI subsystem initialized
[ 27.864429] libata version 3.00 loaded.
[ 27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 23
(level,
low)
->
IRQ 20
[ 27.942119] PCI: Setting latency timer of device
0000:00:1d.0
to
64
[ 27.942124] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
[ 27.942146] uhci_hcd 0000:00:1d.0: new USB bus
registered,
assigned
bus
number 3
[ 27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base
0x0000b800
[ 27.942286] usb usb3: configuration #1 chosen from 1
choice
[ 27.942308] hub 3-0:1.0: USB hub found
[ 27.942313] hub 3-0:1.0: 2 ports detected
[ 28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 19
(level,
low)
->
IRQ 17
[ 28.046055] PCI: Setting latency timer of device
0000:00:1d.1
to
64
[ 28.046059] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
[ 28.046082] uhci_hcd 0000:00:1d.1: new USB bus
registered,
assigned
bus
number 4
[ 28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base
0x0000b480
[ 28.046220] usb usb4: configuration #1 chosen from 1
choice
[ 28.046242] hub 4-0:1.0: USB hub found
[ 28.046246] hub 4-0:1.0: 2 ports detected
[ 28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 18
(level,
low)
->
IRQ 21
[ 28.152998] PCI: Setting latency timer of device
0000:00:1d.2
to
64
[ 28.153003] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
[ 28.153025] uhci_hcd 0000:00:1d.2: new USB bus
registered,
assigned
bus
number 5
[ 28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base
0x0000b400
[ 28.153166] usb usb5: configuration #1 chosen from 1
choice
[ 28.153188] hub 5-0:1.0: USB hub found
[ 28.153192] hub 5-0:1.0: 2 ports detected
[ 28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] ->
GSI 18
(level,
low)
->
IRQ 21
[ 28.256978] PCI: Setting latency timer of device
0000:00:1a.7
to
64
[ 28.256982] ehci_hcd 0000:00:1a.7: EHCI Host
Controller
[ 28.257007] ehci_hcd 0000:00:1a.7: new USB bus
registered,
assigned
bus
number 6
[ 28.260906] ehci_hcd 0000:00:1a.7: debug port 1
[ 28.260913] PCI: cache line size of 32 is not
supported by
device
0000:00:1a.7
[ 28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem
0xf9fffc00
[ 28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started,
EHCI 1.00,
driver
10
Dec 2004
[ 28.273924] usb usb6: configuration #1 chosen from 1
choice
[ 28.273948] hub 6-0:1.0: USB hub found
[ 28.273953] hub 6-0:1.0: 4 ports detected
[ 28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 23
(level,
low)
->
IRQ 20
[ 28.377923] PCI: Setting latency timer of device
0000:00:1d.7
to
64
[ 28.377928] ehci_hcd 0000:00:1d.7: EHCI Host
Controller
[ 28.377961] ehci_hcd 0000:00:1d.7: new USB bus
registered,
assigned
bus
number 7
[ 28.381881] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.381887] PCI: cache line size of 32 is not
supported by
device
0000:00:1d.7
[ 28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem
0xf9fff800
[ 28.392765] usb 4-2: new low speed USB device using
uhci_hcd
and
address
2
[ 28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00,
driver
10
Dec 2004
[ 28.400897] usb usb7: configuration #1 chosen from 1
choice
[ 28.400919] hub 7-0:1.0: USB hub found
[ 28.400924] hub 7-0:1.0: 6 ports detected
[ 28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] ->
GSI 22
(level,
low)
->
IRQ 18
[ 28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
IRQ=[18]
MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT
contexts=[8/8]
[ 28.558719] r8169 Gigabit Ethernet driver 2.2LK
loaded
[ 28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] ->
GSI 16
(level,
low)
->
IRQ 16
[ 28.558818] PCI: Setting latency timer of device
0000:04:00.0
to
64
[ 28.559325] eth0: RTL8168b/8111b at 0xf8c44000,
00:19:db:3b:be:ed,
XID
38000000 IRQ 219
[ 28.848496] Clocksource tsc unstable (delta =
-3284221791 ns)
[ 28.852488] Time: hpet clocksource has been
installed.
[ 28.881456] usb 7-5: new high speed USB device using
ehci_hcd
and
address
3
[ 29.020706] usb 7-5: configuration #1 chosen from 1
choice
[ 29.178496] ata_piix 0000:00:1f.2: version 2.12
[ 29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE
IDE ]
[ 29.186100] usb 4-2: new low speed USB device using
uhci_hcd
and
address
3
[ 29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 18
(level,
low)
->
IRQ 21
[ 29.200001] PCI: Setting latency timer of device
0000:00:1f.2
to
64
[ 29.200144] scsi0 : ata_piix
[ 29.200386] scsi1 : ata_piix
[ 29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl
0x3f6 bmdma
0xffa0
irq
14
[ 29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl
0x376 bmdma
0xffa8
irq
15
[ 29.213016] usb 4-2: configuration #1 chosen from 1
choice
[ 29.232150] usbcore: registered new interface driver
hiddev
[ 29.237144] input: A4Tech PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2
[ 29.244652] input,hidraw0: USB HID v1.10 Mouse
[A4Tech
PS/2+USB
Mouse]
on
usb-0000:00:1d.1-2
[ 29.244671] usbcore: registered new interface driver
usbhid
[ 29.244676]
/build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 29.271950] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00dc10003a871c01]
[ 29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0,
04.01G04,
max
UDMA/133
[ 29.297941] ata1.00: 312581808 sectors, multi 16:
LBA48 NCQ
(depth
0/32)
[ 29.299183] ata1.00: configured for UDMA/133
[ 29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A,
EX32, max
UDMA/33
[ 29.363736] ata2.01: configured for UDMA/33
[ 29.363918] scsi 0:0:0:0: Direct-Access ATA WDC
WD1600BEVS-0
04.0
PQ: 0 ANSI: 5
[ 29.364680] scsi 1:0:1:0: CD-ROM Optiarc
DVD RW
AD-7530A
EX32
PQ: 0 ANSI: 5
[ 29.375749] Driver 'sd' needs updating - please use
bus_type
methods
[ 29.375816] sd 0:0:0:0: [sda] 312581808 512-byte
hardware
sectors
(160042
MB)
[ 29.375827] sd 0:0:0:0: [sda] Write Protect is off
[ 29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.375845] sd 0:0:0:0: [sda] Write cache: enabled,
read
cache:
enabled,
doesn't support DPO or FUA
[ 29.375891] sd 0:0:0:0: [sda] 312581808 512-byte
hardware
sectors
(160042
MB)
[ 29.375900] sd 0:0:0:0: [sda] Write Protect is off
[ 29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.375918] sd 0:0:0:0: [sda] Write cache: enabled,
read
cache:
enabled,
doesn't support DPO or FUA
[ 29.375921] sda:<4>Driver 'sr' needs updating -
please use
bus_type
methods
[ 29.416876] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 29.448097] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.451456] sr0: scsi3-mmc drive: 24x/24x writer
dvd-ram cd/rw
xa/form2
cdda tray
[ 29.451460] Uniform CD-ROM driver Revision: 3.20
[ 29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 29.453330] sd 0:0:0:0: Attached scsi generic sg0
type 0
[ 29.453348] sr 1:0:1:0: Attached scsi generic sg1
type 5
[ 29.984062] Attempting manual resume
[ 29.984065] swsusp: Resume From Partition 8:5
[ 29.984067] PM: Checking swsusp image.
[ 29.984307] PM: Resume from disk failed.
[ 30.020273] kjournald starting. Commit interval 5
seconds
[ 30.020310] EXT3-fs: mounted filesystem with ordered
data
mode.
[ 39.106307] input: PC Speaker as
/devices/platform/pcs
...
[Message clipped]