Roan $ sudo cat /proc/asound/pcm The sudo probably isn't necessary. More later. Regulat job now MarvS On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx> wrote: > first of all i can say that the modem is working with kernel 2.6.21 > but i didn't succeed to make it work under my 2.6.24-19 > downloaded agrsm-20080626.tar.gz > tried to make install, but it says that some needed files are missing. don't > know which ones :( > > on another hand i blacklisted this list of modules you sent me in file > /etc/modeprobe.d/blacklist > ------ > scsi_mod > ehci_hcd > uhci_hcd > usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd > > shpchp 34452 0 > > pci_hotplug 30880 1 shpchp > > pcspkr 4224 0 > > sr_mod 17956 1 > > cdrom 37408 1 sr_mod > > sd_mod 30720 4 > > pcmcia_core > > uvcvideo 58116 0 > > iwl3945 89844 0 > > compat_ioctl32 2304 1 uvcvideo > > iwlwifi_mac80211 219108 1 iwl3945 > > videodev 29440 1 uvcvideo > > v4l1_compat 15492 2 uvcvideo,videodev > > v4l2_common 18304 2 uvcvideo,videodev > > video 19856 8 > > rfcomm 41744 2 > > l2cap 25728 13 rfcomm > > bluetooth 61156 4 rfcomm,l2cap > > snd_atiixp_modem 17672 0 > > snd_via82xx_modem 16392 0 > > snd_intel8x0m > ------ > but nothing changed: the $ /proc/asound/pcm still says "permission denied" > or when i do it with sudo it says " no such file..." > > so please tell me what i need to do to make modem working on 2.6.24-19 > kernel? > thx in advance > > > On Sat, 12 Jul 2008 09:41:01 -0400 > "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >> >> Bjorn, >> >> Would you please work with Roan, to get his >> CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc version 4.2 >> with >> PCI slot PCI ID SubsystemID Name >> ---------- --------- --------- -------------- >> 00:1b.0 8086:284b 1462:3fe9 Audio device: Intel >> Corporation 82801H >> having the 11c11040 Agere chip on Subsystem 1462:3fe9 >> >> Modem interrupt assignment and sharing: >> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel >> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, >> low) -> IRQ 21 >> [ 34.842316] PCI: Setting latency timer of device 0000:00:1b.0 to 64 >> >> The ALSA verion is 1.0.15 >> >> The /proc/asound/pcm file reports: >> ----------------------- >> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >> --------------- >> but there is no expected Modem line, like >> 00-06: Something Modem >> so there is probably a resource conflict to be dealt with and/or an >> ALSA version upgradeto 1.0.16 may be necessary. >> >> Roan >> Detach any external devices which are not Essential (USB and PCMCIA etc.). >> or you can disable the usage through an edit in: >> $ sudo gedit /etc/discover.conf >> Of course you must retain ide and pci services >> >> You can also less globally blacklist non-essential modules, to free up >> resources. >> See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html >> on blacklisting guidance. >> Modules non essential on your System for dialup include: >> scsi_mod needed for USB drivers >> ehci_hcd USB2 >> uhci_hcd other USB >> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >> shpchp 34452 0 >> pci_hotplug 30880 1 shpchp >> pcspkr 4224 0 >> sr_mod 17956 1 >> cdrom 37408 1 sr_mod >> sd_mod 30720 4 >> pcmcia_core >> uvcvideo 58116 0 >> iwl3945 89844 0 >> compat_ioctl32 2304 1 uvcvideo >> iwlwifi_mac80211 219108 1 iwl3945 >> videodev 29440 1 uvcvideo >> v4l1_compat 15492 2 uvcvideo,videodev >> v4l2_common 18304 2 uvcvideo,videodev >> video 19856 8 >> rfcomm 41744 2 >> l2cap 25728 13 rfcomm >> bluetooth 61156 4 rfcomm,l2cap >> snd_atiixp_modem 17672 0 >> snd_via82xx_modem 16392 0 >> snd_intel8x0m modem driver also, not for your HDA system >> >> Then after a reboot, do >> $ /proc/asound/pcm >> to assess if a modem line is present. >> >> Another fast thing you can try is from >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >> agrsm_howto.txt and the linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb >> which already includes agrmodem + agrserial drivers. Install with: >> $ sudo dpkg -i linux-image*.deb >> Then reboot under the new 2.6.21.0-22 kernel and run through the tests >> described in agrsm_howto.txt, except compiling & driver installation >> is already done. >> While lacking this modem hardware, >> linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not cause any >> problems on my otherwise Ubuntu system. It is Debian repackaging of >> the Fedora like kernel-2.6.21.0-22.i686.rpm , which I did. >> >> Joern will direct you with respect to further getting service under >> 2.6.24 kernels. >> The current Mandiva Linux release with 2.4.26 kernels does have a package >> dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm supporting the 11c11040 chip >> modem. >> >> MarvS >> >> >> >> >> On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx> wrote: >>> >>> from the driver information i found out that the device is 1040 >>> there is ven=11c1 and dev=1040 >>> here is the info from lsmod and dmesg >>> ========== >>> Module Size Used by >>> arc4 2944 2 >>> ecb 4480 2 >>> blkcipher 8324 1 ecb >>> nls_iso8859_1 4992 1 >>> nls_cp437 6656 1 >>> isofs 36388 1 >>> vfat 14464 1 >>> fat 54556 1 vfat >>> udf 88612 0 >>> af_packet 23812 6 >>> rfcomm 41744 2 >>> l2cap 25728 13 rfcomm >>> bluetooth 61156 4 rfcomm,l2cap >>> ipv6 267780 14 >>> ppdev 10372 0 >>> snd_atiixp_modem 17672 0 >>> snd_via82xx_modem 16392 0 >>> snd_intel8x0m 19084 0 >>> snd_ac97_codec 101156 3 >>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m >>> ac97_bus 3072 1 snd_ac97_codec >>> acpi_cpufreq 10796 1 >>> cpufreq_stats 7104 0 >>> cpufreq_conservative 8712 0 >>> cpufreq_ondemand 9740 1 >>> freq_table 5536 3 >>> acpi_cpufreq,cpufreq_stats,cpufreq_ondemand >>> cpufreq_userspace 5284 0 >>> cpufreq_powersave 2688 0 >>> sbs 15112 0 >>> sbshc 7680 1 sbs >>> container 5632 0 >>> dock 11280 0 >>> iptable_filter 3840 0 >>> ip_tables 14820 1 iptable_filter >>> x_tables 16132 1 ip_tables >>> coretemp 8448 0 >>> sbp2 24072 0 >>> parport_pc 36260 0 >>> lp 12324 0 >>> parport 37832 3 ppdev,parport_pc,lp >>> snd_hda_intel 351908 3 >>> snd_pcm_oss 42528 0 >>> snd_mixer_oss 18048 1 snd_pcm_oss >>> snd_pcm 78852 6 >>> >>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss >>> snd_page_alloc 11656 5 >>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm >>> snd_hwdep 10628 1 snd_hda_intel >>> joydev 13120 0 >>> mmc_block 14980 1 >>> snd_seq_dummy 4996 0 >>> pcmcia 40876 0 >>> snd_seq_oss 35456 0 >>> snd_seq_midi 9504 0 >>> snd_rawmidi 25888 1 snd_seq_midi >>> uvcvideo 58116 0 >>> iwl3945 89844 0 >>> snd_seq_midi_event 8576 2 snd_seq_oss,snd_seq_midi >>> compat_ioctl32 2304 1 uvcvideo >>> iwlwifi_mac80211 219108 1 iwl3945 >>> snd_seq 54096 6 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>> nvidia 7825536 36 >>> videodev 29440 1 uvcvideo >>> v4l1_compat 15492 2 uvcvideo,videodev >>> v4l2_common 18304 2 uvcvideo,videodev >>> video 19856 8 >>> psmouse 40336 0 >>> ac 6916 0 >>> sdhci 19076 0 >>> battery 14212 0 >>> snd_timer 24964 2 snd_pcm,snd_seq >>> cfg80211 15112 1 iwlwifi_mac80211 >>> i2c_core 24832 1 nvidia >>> output 4736 1 video >>> serio_raw 7940 0 >>> mmc_core 51460 2 mmc_block,sdhci >>> snd_seq_device 9740 5 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>> yenta_socket 27276 1 >>> rsrc_nonstatic 13696 1 yenta_socket >>> pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic >>> snd 56996 21 >>> >>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>> evdev 13056 6 >>> button 9232 0 >>> iTCO_wdt 13092 0 >>> iTCO_vendor_support 4868 1 iTCO_wdt >>> intel_agp 25492 0 >>> agpgart 34760 2 nvidia,intel_agp >>> soundcore 8800 1 snd >>> shpchp 34452 0 >>> pci_hotplug 30880 1 shpchp >>> pcspkr 4224 0 >>> ext3 136712 1 >>> jbd 48404 1 ext3 >>> mbcache 9600 1 ext3 >>> sg 36880 0 >>> sr_mod 17956 1 >>> cdrom 37408 1 sr_mod >>> sd_mod 30720 4 >>> ata_generic 8324 0 >>> pata_acpi 8320 0 >>> usbhid 31872 0 >>> hid 38784 1 usbhid >>> ohci1394 33584 0 >>> ata_piix 19588 4 >>> ieee1394 93752 2 sbp2,ohci1394 >>> r8169 32900 0 >>> libata 159344 3 ata_generic,pata_acpi,ata_piix >>> scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata >>> ehci_hcd 37900 0 >>> uhci_hcd 27024 0 >>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>> thermal 16796 0 >>> processor 36872 4 acpi_cpufreq,thermal >>> fan 5636 0 >>> fuse 50580 5 >>> vesafb 8964 1 >>> fbcon 42912 72 >>> tileblit 3456 1 fbcon >>> font 9472 1 fbcon >>> bitblit 6784 1 fbcon >>> softcursor 3072 1 bitblit >>> [ 0.000000] Initializing cgroup subsys cpuset >>> [ 0.000000] Initializing cgroup subsys cpu >>> [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc >>> version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC >>> 2008 >>> (Ubuntu 2.6.24-18.32-generic) >>> [ 0.000000] BIOS-provided physical RAM map: >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) >>> [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI >>> data) >>> [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS) >>> [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >>> [ 0.000000] 1151MB HIGHMEM available. >>> [ 0.000000] 896MB LOWMEM available. >>> [ 0.000000] found SMP MP-table at 000ff780 >>> [ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of 256 >>> used >>> [ 0.000000] Zone PFN ranges: >>> [ 0.000000] DMA 0 -> 4096 >>> [ 0.000000] Normal 4096 -> 229376 >>> [ 0.000000] HighMem 229376 -> 524208 >>> [ 0.000000] Movable zone start PFN for each node >>> [ 0.000000] early_node_map[1] active PFN ranges >>> [ 0.000000] 0: 0 -> 524208 >>> [ 0.000000] On node 0 totalpages: 524208 >>> [ 0.000000] DMA zone: 32 pages used for memmap >>> [ 0.000000] DMA zone: 0 pages reserved >>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 >>> [ 0.000000] Normal zone: 1760 pages used for memmap >>> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 >>> [ 0.000000] HighMem zone: 2303 pages used for memmap >>> [ 0.000000] HighMem zone: 292529 pages, LIFO batch:31 >>> [ 0.000000] Movable zone: 0 pages used for memmap >>> [ 0.000000] DMI present. >>> [ 0.000000] ACPI: RSDP signature @ 0xC00F84A0 checksum 0 >>> [ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM) >>> [ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB MEGABOOK 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707 FACP1702 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636 M1636000 0 >>> INTL >>> 20051117) >>> [ 0.000000] ACPI: FACS 7FFBE000, 0040 >>> [ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707 APIC1702 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707 OEMMCFG 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB MEGABOOK 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707 OEMB1702 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707 OEMHPET 20070517 >>> MSFT >>> 97) >>> [ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef CpuPm 3000 INTL >>> 20051117) >>> [ 0.000000] ACPI: PM-Timer IO Port: 0x808 >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>> [ 0.000000] Processor #0 6:15 APIC version 20 >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>> [ 0.000000] Processor #1 6:15 APIC version 20 >>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI >>> 0-23 >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>> level) >>> [ 0.000000] ACPI: IRQ0 used by override. >>> [ 0.000000] ACPI: IRQ2 used by override. >>> [ 0.000000] ACPI: IRQ9 used by override. >>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs >>> [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: >>> 80000000:7ee00000) >>> [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 >>> - >>> 00000000000a0000 >>> [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 >>> - >>> 00000000000e0000 >>> [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 >>> - >>> 0000000000100000 >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>> Total >>> pages: 520113 >>> [ 0.000000] Kernel command line: >>> root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash vga=789 quiet >>> [ 0.000000] mapped APIC to ffffb000 (fee00000) >>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) >>> [ 0.000000] Enabling fast FPU save and restore... done. >>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done. >>> [ 0.000000] Initializing CPU#0 >>> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) >>> [ 0.000000] Detected 1795.565 MHz processor. >>> [ 24.138347] Console: colour dummy device 80x25 >>> [ 24.138350] console [tty0] enabled >>> [ 24.138603] Dentry cache hash table entries: 131072 (order: 7, 524288 >>> bytes) >>> [ 24.138876] Inode-cache hash table entries: 65536 (order: 6, 262144 >>> bytes) >>> [ 24.226903] Memory: 2066816k/2096832k available (2176k kernel code, >>> 28700k reserved, 1006k data, 368k init, 1179328k highmem) >>> [ 24.226909] virtual kernel memory layout: >>> [ 24.226910] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) >>> [ 24.226911] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>> [ 24.226912] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>> [ 24.226913] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>> [ 24.226914] .init : 0xc0421000 - 0xc047d000 ( 368 kB) >>> [ 24.226915] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) >>> [ 24.226916] .text : 0xc0100000 - 0xc03201f4 (2176 kB) >>> [ 24.226919] Checking if this processor honours the WP bit even in >>> supervisor mode... Ok. >>> [ 24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, >>> CPUs=2, Nodes=1 >>> [ 24.227097] hpet clockevent registered >>> [ 24.307060] Calibrating delay using timer specific routine.. 3595.17 >>> BogoMIPS (lpj=7190350) >>> [ 24.307082] Security Framework initialized >>> [ 24.307088] SELinux: Disabled at boot. >>> [ 24.307100] AppArmor: AppArmor initialized >>> [ 24.307103] Failure registering capabilities with primary security >>> module. >>> [ 24.307111] Mount-cache hash table entries: 512 >>> [ 24.307223] Initializing cgroup subsys ns >>> [ 24.307228] Initializing cgroup subsys cpuacct >>> [ 24.307237] CPU: After generic identify, caps: bfebfbff 20100000 >>> 00000000 >>> 00000000 0000e3bd 00000000 00000001 00000000 >>> [ 24.307244] monitor/mwait feature present. >>> [ 24.307246] using mwait in idle threads. >>> [ 24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K >>> [ 24.307252] CPU: L2 cache: 2048K >>> [ 24.307254] CPU: Physical Processor ID: 0 >>> [ 24.307255] CPU: Processor Core ID: 0 >>> [ 24.307257] CPU: After all inits, caps: bfebfbff 20100000 00000000 >>> 00003940 0000e3bd 00000000 00000001 00000000 >>> [ 24.307266] Compat vDSO mapped to ffffe000. >>> [ 24.307278] Checking 'hlt' instruction... OK. >>> [ 24.323404] SMP alternatives: switching to UP code >>> [ 24.324901] Early unpacking initramfs... done >>> [ 24.643306] ACPI: Core revision 20070126 >>> [ 24.643345] ACPI: Looking for DSDT in initramfs... error, file >>> /DSDT.aml >>> not found. >>> [ 24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>> stepping >>> 0d >>> [ 24.645818] SMP alternatives: switching to SMP code >>> [ 24.646454] Booting processor 1/1 eip 3000 >>> [ 24.656641] Initializing CPU#1 >>> [ 24.734815] Calibrating delay using timer specific routine.. 3590.98 >>> BogoMIPS (lpj=7181974) >>> [ 24.734821] CPU: After generic identify, caps: bfebfbff 20100000 >>> 00000000 >>> 00000000 0000e3bd 00000000 00000001 00000000 >>> [ 24.734826] monitor/mwait feature present. >>> [ 24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K >>> [ 24.734830] CPU: L2 cache: 2048K >>> [ 24.734832] CPU: Physical Processor ID: 0 >>> [ 24.734833] CPU: Processor Core ID: 1 >>> [ 24.734835] CPU: After all inits, caps: bfebfbff 20100000 00000000 >>> 00003940 0000e3bd 00000000 00000001 00000000 >>> [ 24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>> stepping >>> 0d >>> [ 24.735413] Total of 2 processors activated (7186.16 BogoMIPS). >>> [ 24.735588] ENABLING IO-APIC IRQs >>> [ 24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> [ 24.882841] checking TSC synchronization [CPU#0 -> CPU#1]: passed. >>> [ 24.902845] Brought up 2 CPUs >>> [ 24.902867] CPU0 attaching sched-domain: >>> [ 24.902869] domain 0: span 03 >>> [ 24.902871] groups: 01 02 >>> [ 24.902874] CPU1 attaching sched-domain: >>> [ 24.902875] domain 0: span 03 >>> [ 24.902877] groups: 02 01 >>> [ 24.903074] net_namespace: 64 bytes >>> [ 24.903085] Booting paravirtualized kernel on bare hardware >>> [ 24.903524] Time: 14:55:42 Date: 07/12/08 >>> [ 24.903549] NET: Registered protocol family 16 >>> [ 24.903721] EISA bus registered >>> [ 24.903725] ACPI: bus type pci registered >>> [ 24.903966] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 >>> [ 24.903968] PCI: Using configuration type 1 >>> [ 24.903970] Setting up standard PCI resources >>> [ 24.912870] ACPI: EC: Look up EC in DSDT >>> [ 24.915987] ACPI: Interpreter enabled >>> [ 24.915990] ACPI: (supports S0 S1 S3 S4 S5) >>> [ 24.916005] ACPI: Using IOAPIC for interrupt routing >>> [ 24.916251] Error attaching device data >>> [ 24.916288] Error attaching device data >>> [ 24.918045] ACPI: EC: non-query interrupt received, switching to >>> interrupt mode >>> [ 24.922776] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = >>> 0x62 >>> [ 24.922779] ACPI: EC: driver started in interrupt mode >>> [ 24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00) >>> [ 24.923832] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO >>> [ 24.923836] PCI quirk: region 0500-053f claimed by ICH6 GPIO >>> [ 24.925529] PCI: Transparent bridge - 0000:00:1e.0 >>> [ 24.925622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> [ 24.925751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] >>> [ 24.925830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >>> [ 24.925930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] >>> [ 24.926006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] >>> [ 24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 >>> 14 >>> 15) >>> [ 24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 >>> 14 >>> 15) *0, disabled. >>> [ 24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 >>> 14 >>> 15) >>> [ 24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 >>> 14 >>> 15) >>> [ 24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 >>> 14 >>> 15) *0, disabled. >>> [ 24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 >>> 14 >>> 15) >>> [ 24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 >>> 14 >>> 15) >>> [ 24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 >>> 14 >>> 15) >>> [ 24.938649] Linux Plug and Play Support v0.97 (c) Adam Belay >>> [ 24.938676] pnp: PnP ACPI init >>> [ 24.938683] ACPI: bus type pnp registered >>> [ 24.940724] pnp: PnP ACPI: found 13 devices >>> [ 24.940726] ACPI: ACPI bus type pnp unregistered >>> [ 24.940730] PnPBIOS: Disabled by ACPI PNP >>> [ 24.940928] PCI: Using ACPI for IRQ routing >>> [ 24.940931] PCI: If a device doesn't work, try "pci=routeirq". If it >>> helps, post a report >>> [ 24.994683] NET: Registered protocol family 8 >>> [ 24.994685] NET: Registered protocol family 20 >>> [ 24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>> [ 24.994720] hpet0: 3 64-bit timers, 14318180 Hz >>> [ 24.995752] AppArmor: AppArmor Filesystem Enabled >>> [ 24.998674] Time: tsc clocksource has been installed. >>> [ 24.998681] Switched to high resolution mode on CPU 0 >>> [ 24.998786] Switched to high resolution mode on CPU 1 >>> [ 25.014660] system 00:01: iomem range 0xfed14000-0xfed19fff has been >>> reserved >>> [ 25.014670] system 00:08: ioport range 0x400-0x41f has been reserved >>> [ 25.014672] system 00:08: ioport range 0x4d0-0x4d1 has been reserved >>> [ 25.014674] system 00:08: ioport range 0x800-0x87f has been reserved >>> [ 25.014677] system 00:08: ioport range 0x500-0x53f has been reserved >>> [ 25.014679] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been >>> reserved >>> [ 25.014682] system 00:08: iomem range 0xfed20000-0xfed3ffff has been >>> reserved >>> [ 25.014684] system 00:08: iomem range 0xfed40000-0xfed8ffff has been >>> reserved >>> [ 25.014690] system 00:0a: iomem range 0xfec00000-0xfec00fff has been >>> reserved >>> [ 25.014693] system 00:0a: iomem range 0xfee00000-0xfee00fff could not >>> be >>> reserved >>> [ 25.014698] system 00:0b: iomem range 0xe0000000-0xefffffff has been >>> reserved >>> [ 25.014703] system 00:0c: iomem range 0x0-0x9ffff could not be >>> reserved >>> [ 25.014706] system 00:0c: iomem range 0xc0000-0xcffff could not be >>> reserved >>> [ 25.014708] system 00:0c: iomem range 0xe0000-0xfffff could not be >>> reserved >>> [ 25.014711] system 00:0c: iomem range 0x100000-0x7fffffff could not be >>> reserved >>> [ 25.014713] system 00:0c: iomem range 0xfed90000-0xffffffff could not >>> be >>> reserved >>> [ 25.045096] PCI: Bridge: 0000:00:01.0 >>> [ 25.045099] IO window: c000-cfff >>> [ 25.045102] MEM window: fa000000-fe0fffff >>> [ 25.045105] PREFETCH window: d0000000-dfffffff >>> [ 25.045109] PCI: Bridge: 0000:00:1c.0 >>> [ 25.045110] IO window: disabled. >>> [ 25.045116] MEM window: disabled. >>> [ 25.045120] PREFETCH window: disabled. >>> [ 25.045126] PCI: Bridge: 0000:00:1c.3 >>> [ 25.045127] IO window: disabled. >>> [ 25.045133] MEM window: fe100000-fe1fffff >>> [ 25.045137] PREFETCH window: disabled. >>> [ 25.045143] PCI: Bridge: 0000:00:1c.4 >>> [ 25.045145] IO window: d000-dfff >>> [ 25.045151] MEM window: fe200000-fe2fffff >>> [ 25.045156] PREFETCH window: disabled. >>> [ 25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0 >>> [ 25.045171] IO window: 0000e000-0000e0ff >>> [ 25.045175] IO window: 0000e400-0000e4ff >>> [ 25.045180] PREFETCH window: 88000000-8bffffff >>> [ 25.045185] MEM window: 8c000000-8fffffff >>> [ 25.045190] PCI: Bridge: 0000:00:1e.0 >>> [ 25.045193] IO window: e000-efff >>> [ 25.045199] MEM window: fe300000-febfffff >>> [ 25.045204] PREFETCH window: f7000000-f8ffffff >>> [ 25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 25.045225] PCI: Setting latency timer of device 0000:00:01.0 to 64 >>> [ 25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 25.045255] PCI: Setting latency timer of device 0000:00:1c.0 to 64 >>> [ 25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) >>> -> >>> IRQ 17 >>> [ 25.045285] PCI: Setting latency timer of device 0000:00:1c.3 to 64 >>> [ 25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 25.045315] PCI: Setting latency timer of device 0000:00:1c.4 to 64 >>> [ 25.045329] PCI: Setting latency timer of device 0000:00:1e.0 to 64 >>> [ 25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 (level, low) >>> -> >>> IRQ 18 >>> [ 25.045360] NET: Registered protocol family 2 >>> [ 25.082645] IP route cache hash table entries: 32768 (order: 5, 131072 >>> bytes) >>> [ 25.082845] TCP established hash table entries: 131072 (order: 8, >>> 1048576 >>> bytes) >>> [ 25.083237] TCP bind hash table entries: 65536 (order: 7, 524288 >>> bytes) >>> [ 25.083430] TCP: Hash tables configured (established 131072 bind >>> 65536) >>> [ 25.083432] TCP reno registered >>> [ 25.094708] checking if image is initramfs... it is >>> [ 25.722077] Freeing initrd memory: 7319k freed >>> [ 25.722788] audit: initializing netlink socket (disabled) >>> [ 25.722801] audit(1215874543.369:1): initialized >>> [ 25.722995] highmem bounce pool size: 64 pages >>> [ 25.724776] VFS: Disk quotas dquot_6.5.1 >>> [ 25.724842] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> [ 25.724962] io scheduler noop registered >>> [ 25.724964] io scheduler anticipatory registered >>> [ 25.724965] io scheduler deadline registered >>> [ 25.724978] io scheduler cfq registered (default) >>> [ 25.725110] Boot video device is 0000:01:00.0 >>> [ 25.725211] PCI: Setting latency timer of device 0000:00:01.0 to 64 >>> [ 25.725249] assign_interrupt_mode Found MSI capability >>> [ 25.725279] Allocate Port Service[0000:00:01.0:pcie00] >>> [ 25.725312] Allocate Port Service[0000:00:01.0:pcie02] >>> [ 25.725388] PCI: Setting latency timer of device 0000:00:1c.0 to 64 >>> [ 25.725449] assign_interrupt_mode Found MSI capability >>> [ 25.725497] Allocate Port Service[0000:00:1c.0:pcie00] >>> [ 25.725526] Allocate Port Service[0000:00:1c.0:pcie02] >>> [ 25.725626] PCI: Setting latency timer of device 0000:00:1c.3 to 64 >>> [ 25.725687] assign_interrupt_mode Found MSI capability >>> [ 25.725734] Allocate Port Service[0000:00:1c.3:pcie00] >>> [ 25.725764] Allocate Port Service[0000:00:1c.3:pcie02] >>> [ 25.725864] PCI: Setting latency timer of device 0000:00:1c.4 to 64 >>> [ 25.725924] assign_interrupt_mode Found MSI capability >>> [ 25.725972] Allocate Port Service[0000:00:1c.4:pcie00] >>> [ 25.726003] Allocate Port Service[0000:00:1c.4:pcie02] >>> [ 25.726246] isapnp: Scanning for PnP cards... >>> [ 26.081376] isapnp: No Plug & Play device found >>> [ 26.104263] Real Time Clock Driver v1.12ac >>> [ 26.104422] hpet_resources: 0xfed00000 is busy >>> [ 26.104462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ >>> sharing enabled >>> [ 26.105578] RAMDISK driver initialized: 16 RAM disks of 65536K size >>> 1024 >>> blocksize >>> [ 26.105638] input: Macintosh mouse button emulation as >>> /devices/virtual/input/input0 >>> [ 26.105728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>> 0x60,0x64 >>> irq 1,12 >>> [ 26.106070] i8042.c: Detected active multiplexing controller, rev 1.1. >>> [ 26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1 >>> [ 26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>> [ 26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>> [ 26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>> [ 26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>> [ 26.134091] mice: PS/2 mouse device common for all mice >>> [ 26.134193] EISA: Probing bus 0 at eisa.0 >>> [ 26.134231] EISA: Detected 0 cards. >>> [ 26.134234] cpuidle: using governor ladder >>> [ 26.134235] cpuidle: using governor menu >>> [ 26.134311] NET: Registered protocol family 1 >>> [ 26.134336] Using IPI No-Shortcut mode >>> [ 26.134361] registered taskstats version 1 >>> [ 26.134462] Magic number: 0:283:940 >>> [ 26.134491] hash matches device ptyyb >>> [ 26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>> [ 26.134527] EDD information not available. >>> [ 26.134709] Freeing unused kernel memory: 368k freed >>> [ 26.137228] input: AT Translated Set 2 keyboard as >>> /devices/platform/i8042/serio0/input/input1 >>> [ 26.228218] vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, >>> using 3750k, total 14336k >>> [ 26.228221] vesafb: mode is 800x600x32, linelength=3200, pages=1 >>> [ 26.228223] vesafb: protected mode interface info at c000:b230 >>> [ 26.228226] vesafb: pmi: set display start = c00cb293, set palette = >>> c00cb2ee >>> [ 26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 >>> 3c8 >>> 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da >>> [ 26.228240] vesafb: scrolling: redraw >>> [ 26.228242] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >>> [ 26.228336] Console: switching to colour frame buffer device 100x37 >>> [ 26.257461] fb0: VESA VGA frame buffer device >>> [ 27.394531] fuse init (API version 7.9) >>> [ 27.413176] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef Cpu0Ist 3000 INTL >>> 20051117) >>> [ 27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef Cpu0Cst 3001 INTL >>> 20051117) >>> [ 27.413641] Monitor-Mwait will be used to enter C-1 state >>> [ 27.413644] Monitor-Mwait will be used to enter C-2 state >>> [ 27.413646] Monitor-Mwait will be used to enter C-3 state >>> [ 27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >>> [ 27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL >>> 20051117) >>> [ 27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef Cpu1Cst 3000 INTL >>> 20051117) >>> [ 27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >>> [ 27.416854] ACPI: Thermal Zone [THRM] (67 C) >>> [ 27.722830] usbcore: registered new interface driver usbfs >>> [ 27.722854] usbcore: registered new interface driver hub >>> [ 27.722880] usbcore: registered new device driver usb >>> [ 27.734151] USB Universal Host Controller Interface driver v3.0 >>> [ 27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 27.734213] PCI: Setting latency timer of device 0000:00:1a.0 to 64 >>> [ 27.734217] uhci_hcd 0000:00:1a.0: UHCI Host Controller >>> [ 27.734416] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned >>> bus >>> number 1 >>> [ 27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 >>> [ 27.734574] usb usb1: configuration #1 chosen from 1 choice >>> [ 27.734596] hub 1-0:1.0: USB hub found >>> [ 27.734600] hub 1-0:1.0: 2 ports detected >>> [ 27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) >>> -> >>> IRQ 19 >>> [ 27.838155] PCI: Setting latency timer of device 0000:00:1a.1 to 64 >>> [ 27.838160] uhci_hcd 0000:00:1a.1: UHCI Host Controller >>> [ 27.838183] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned >>> bus >>> number 2 >>> [ 27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b880 >>> [ 27.838318] usb usb2: configuration #1 chosen from 1 choice >>> [ 27.838340] hub 2-0:1.0: USB hub found >>> [ 27.838345] hub 2-0:1.0: 2 ports detected >>> [ 27.845899] SCSI subsystem initialized >>> [ 27.864429] libata version 3.00 loaded. >>> [ 27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) >>> -> >>> IRQ 20 >>> [ 27.942119] PCI: Setting latency timer of device 0000:00:1d.0 to 64 >>> [ 27.942124] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>> [ 27.942146] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned >>> bus >>> number 3 >>> [ 27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b800 >>> [ 27.942286] usb usb3: configuration #1 chosen from 1 choice >>> [ 27.942308] hub 3-0:1.0: USB hub found >>> [ 27.942313] hub 3-0:1.0: 2 ports detected >>> [ 28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) >>> -> >>> IRQ 17 >>> [ 28.046055] PCI: Setting latency timer of device 0000:00:1d.1 to 64 >>> [ 28.046059] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>> [ 28.046082] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned >>> bus >>> number 4 >>> [ 28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b480 >>> [ 28.046220] usb usb4: configuration #1 chosen from 1 choice >>> [ 28.046242] hub 4-0:1.0: USB hub found >>> [ 28.046246] hub 4-0:1.0: 2 ports detected >>> [ 28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) >>> -> >>> IRQ 21 >>> [ 28.152998] PCI: Setting latency timer of device 0000:00:1d.2 to 64 >>> [ 28.153003] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>> [ 28.153025] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned >>> bus >>> number 5 >>> [ 28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b400 >>> [ 28.153166] usb usb5: configuration #1 chosen from 1 choice >>> [ 28.153188] hub 5-0:1.0: USB hub found >>> [ 28.153192] hub 5-0:1.0: 2 ports detected >>> [ 28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) >>> -> >>> IRQ 21 >>> [ 28.256978] PCI: Setting latency timer of device 0000:00:1a.7 to 64 >>> [ 28.256982] ehci_hcd 0000:00:1a.7: EHCI Host Controller >>> [ 28.257007] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned >>> bus >>> number 6 >>> [ 28.260906] ehci_hcd 0000:00:1a.7: debug port 1 >>> [ 28.260913] PCI: cache line size of 32 is not supported by device >>> 0000:00:1a.7 >>> [ 28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf9fffc00 >>> [ 28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver >>> 10 >>> Dec 2004 >>> [ 28.273924] usb usb6: configuration #1 chosen from 1 choice >>> [ 28.273948] hub 6-0:1.0: USB hub found >>> [ 28.273953] hub 6-0:1.0: 4 ports detected >>> [ 28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) >>> -> >>> IRQ 20 >>> [ 28.377923] PCI: Setting latency timer of device 0000:00:1d.7 to 64 >>> [ 28.377928] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>> [ 28.377961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned >>> bus >>> number 7 >>> [ 28.381881] ehci_hcd 0000:00:1d.7: debug port 1 >>> [ 28.381887] PCI: cache line size of 32 is not supported by device >>> 0000:00:1d.7 >>> [ 28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800 >>> [ 28.392765] usb 4-2: new low speed USB device using uhci_hcd and >>> address >>> 2 >>> [ 28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver >>> 10 >>> Dec 2004 >>> [ 28.400897] usb usb7: configuration #1 chosen from 1 choice >>> [ 28.400919] hub 7-0:1.0: USB hub found >>> [ 28.400924] hub 7-0:1.0: 6 ports detected >>> [ 28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 22 (level, low) >>> -> >>> IRQ 18 >>> [ 28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] >>> MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8] >>> [ 28.558719] r8169 Gigabit Ethernet driver 2.2LK loaded >>> [ 28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 28.558818] PCI: Setting latency timer of device 0000:04:00.0 to 64 >>> [ 28.559325] eth0: RTL8168b/8111b at 0xf8c44000, 00:19:db:3b:be:ed, XID >>> 38000000 IRQ 219 >>> [ 28.848496] Clocksource tsc unstable (delta = -3284221791 ns) >>> [ 28.852488] Time: hpet clocksource has been installed. >>> [ 28.881456] usb 7-5: new high speed USB device using ehci_hcd and >>> address >>> 3 >>> [ 29.020706] usb 7-5: configuration #1 chosen from 1 choice >>> [ 29.178496] ata_piix 0000:00:1f.2: version 2.12 >>> [ 29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] >>> [ 29.186100] usb 4-2: new low speed USB device using uhci_hcd and >>> address >>> 3 >>> [ 29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) >>> -> >>> IRQ 21 >>> [ 29.200001] PCI: Setting latency timer of device 0000:00:1f.2 to 64 >>> [ 29.200144] scsi0 : ata_piix >>> [ 29.200386] scsi1 : ata_piix >>> [ 29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 >>> irq >>> 14 >>> [ 29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 >>> irq >>> 15 >>> [ 29.213016] usb 4-2: configuration #1 chosen from 1 choice >>> [ 29.232150] usbcore: registered new interface driver hiddev >>> [ 29.237144] input: A4Tech PS/2+USB Mouse as >>> /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2 >>> [ 29.244652] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] >>> on >>> usb-0000:00:1d.1-2 >>> [ 29.244671] usbcore: registered new interface driver usbhid >>> [ 29.244676] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: >>> v2.6:USB HID core driver >>> [ 29.271950] ieee1394: Host added: ID:BUS[0-00:1023] >>> GUID[00dc10003a871c01] >>> [ 29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max >>> UDMA/133 >>> [ 29.297941] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth >>> 0/32) >>> [ 29.299183] ata1.00: configured for UDMA/133 >>> [ 29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, EX32, max UDMA/33 >>> [ 29.363736] ata2.01: configured for UDMA/33 >>> [ 29.363918] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 04.0 >>> PQ: 0 ANSI: 5 >>> [ 29.364680] scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7530A >>> EX32 >>> PQ: 0 ANSI: 5 >>> [ 29.375749] Driver 'sd' needs updating - please use bus_type methods >>> [ 29.375816] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors >>> (160042 >>> MB) >>> [ 29.375827] sd 0:0:0:0: [sda] Write Protect is off >>> [ 29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 29.375845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, >>> doesn't support DPO or FUA >>> [ 29.375891] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors >>> (160042 >>> MB) >>> [ 29.375900] sd 0:0:0:0: [sda] Write Protect is off >>> [ 29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 29.375918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, >>> doesn't support DPO or FUA >>> [ 29.375921] sda:<4>Driver 'sr' needs updating - please use bus_type >>> methods >>> [ 29.416876] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > >>> [ 29.448097] sd 0:0:0:0: [sda] Attached SCSI disk >>> [ 29.451456] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >>> xa/form2 >>> cdda tray >>> [ 29.451460] Uniform CD-ROM driver Revision: 3.20 >>> [ 29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0 >>> [ 29.453330] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> [ 29.453348] sr 1:0:1:0: Attached scsi generic sg1 type 5 >>> [ 29.984062] Attempting manual resume >>> [ 29.984065] swsusp: Resume From Partition 8:5 >>> [ 29.984067] PM: Checking swsusp image. >>> [ 29.984307] PM: Resume from disk failed. >>> [ 30.020273] kjournald starting. Commit interval 5 seconds >>> [ 30.020310] EXT3-fs: mounted filesystem with ordered data mode. >>> [ 39.106307] input: PC Speaker as /devices/platform/pcspkr/input/input3 >>> [ 39.182164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>> [ 39.214162] shpchp: Standard Hot Plug PCI Controller Driver version: >>> 0.4 >>> [ 39.314029] Linux agpgart interface v0.102 >>> [ 39.344769] iTCO_vendor_support: vendor-support=0 >>> [ 39.356145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 >>> (26-Jul-2007) >>> [ 39.356213] iTCO_wdt: Found a ICH8M TCO device (Version=2, >>> TCOBASE=0x0860) >>> [ 39.356253] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>> [ 39.376103] input: Power Button (FF) as /devices/virtual/input/input4 >>> [ 39.397945] ACPI: Power Button (FF) [PWRF] >>> [ 39.398024] input: Lid Switch as /devices/virtual/input/input5 >>> [ 39.398442] ACPI: Lid Switch [LID0] >>> [ 39.398525] input: Power Button (CM) as /devices/virtual/input/input6 >>> [ 39.420942] ACPI: Power Button (CM) [PWRB] >>> [ 40.062138] Yenta: CardBus bridge found at 0000:05:04.0 [1462:3fe9] >>> [ 40.062165] Yenta O2: res at 0x94/0xD4: 00/ea >>> [ 40.062167] Yenta O2: enabling read prefetch/write burst >>> [ 40.190436] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 >>> [ 40.190441] Socket status: 30000006 >>> [ 40.190443] Yenta: Raising subordinate bus# of parent bus (#05) from >>> #06 >>> to #09 >>> [ 40.190448] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff >>> [ 40.190450] cs: IO port probe 0xe000-0xefff: clean. >>> [ 40.190687] pcmcia: parent PCI bridge Memory window: 0xfe300000 - >>> 0xfebfffff >>> [ 40.190689] pcmcia: parent PCI bridge Memory window: 0xf7000000 - >>> 0xf8ffffff >>> [ 40.509499] ACPI: Battery Slot [BAT1] (battery absent) >>> [ 40.525446] sdhci: Secure Digital Host Controller Interface driver >>> [ 40.525449] sdhci: Copyright(c) Pierre Ossman >>> [ 40.525490] sdhci: SDHCI controller found at 0000:05:04.2 [1217:7120] >>> (rev 2) >>> [ 40.525517] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 22 (level, low) >>> -> >>> IRQ 18 >>> [ 40.525535] sdhci:slot0: Unknown controller version (2). You may >>> experience problems. >>> [ 40.525590] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA >>> [ 40.530106] ACPI: AC Adapter [ADP1] (on-line) >>> [ 40.584449] input: Video Bus as >>> >>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 >>> [ 40.626708] mmc0: new high speed SD card at address b368 >>> [ 40.626724] Linux video capture interface: v2.00 >>> [ 40.633956] ACPI: Video Device [NVGA] (multi-head: yes rom: no post: >>> no) >>> [ 40.650802] nvidia: module license 'NVIDIA' taints kernel. >>> [ 40.905503] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 40.905517] PCI: Setting latency timer of device 0000:01:00.0 to 64 >>> [ 40.905638] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu >>> Feb >>> 14 17:53:07 PST 2008 >>> [ 41.107933] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network >>> Connection >>> driver for Linux, 1.2.0 >>> [ 41.107937] iwl3945: Copyright(c) 2003-2007 Intel Corporation >>> [ 41.108046] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) >>> -> >>> IRQ 17 >>> [ 41.108067] PCI: Setting latency timer of device 0000:03:00.0 to 64 >>> [ 41.108094] iwl3945: Detected Intel PRO/Wireless 3945ABG Network >>> Connection >>> [ 41.113192] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) >>> [ 41.157982] usbcore: registered new interface driver uvcvideo >>> [ 41.157987] USB Video Class driver (v0.1.0) >>> [ 41.163654] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: >>> 0xa04713/0x10008 >>> [ 41.205402] input: SynPS/2 Synaptics TouchPad as >>> /devices/platform/i8042/serio4/input/input8 >>> [ 41.527140] mmcblk0: mmc0:b368 SMI 124160KiB >>> [ 41.527171] mmcblk0: unknown partition table >>> [ 41.548058] iwl3945: Radio Frequency Kill Switch is On: >>> [ 41.548060] Kill switch must be turned off for wireless networking to >>> work. >>> [ 41.552637] iwl3945: WARNING: Requesting MAC access during RFKILL >>> wakes >>> up NIC >>> [ 41.562730] iwl3945: WARNING: Requesting MAC access during RFKILL >>> wakes >>> up NIC >>> [ 41.582688] iwl3945: WARNING: Requesting MAC access during RFKILL >>> wakes >>> up NIC >>> [ 41.612899] iwl3945: WARNING: Requesting MAC access during RFKILL >>> wakes >>> up NIC >>> [ 41.632896] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a >>> channels >>> [ 41.673310] cs: IO port probe 0x100-0x3af: clean. >>> [ 41.675403] cs: IO port probe 0x3e0-0x4ff: clean. >>> [ 41.676206] cs: IO port probe 0x820-0x8ff: clean. >>> [ 41.676648] cs: IO port probe 0xc00-0xcf7: clean. >>> [ 41.677543] cs: IO port probe 0xa00-0xaff: clean. >>> [ 41.951205] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) >>> -> >>> IRQ 19 >>> [ 41.951224] PCI: Setting latency timer of device 0000:00:1b.0 to 64 >>> [ 41.959807] hda_codec: Unknown model for ALC883, trying auto-probe >>> from >>> BIOS... >>> [ 42.148966] lp: driver loaded but no devices found >>> [ 42.292437] Adding 4198396k swap on /dev/sda5. Priority:-1 extents:1 >>> across:4198396k >>> [ 42.718838] EXT3 FS on sda6, internal journal >>> [ 43.959928] ip_tables: (C) 2000-2006 Netfilter Core Team >>> [ 44.382509] No dock devices found. >>> [ 46.545179] apm: BIOS not found. >>> [ 46.658069] ppdev: user-space parallel port driver >>> [ 46.791061] audit(1215863779.828:2): type=1503 >>> operation="inode_permission" requested_mask="a::" denied_mask="a::" >>> name="/dev/tty" pid=5516 profile="/usr/sbin/cupsd" namespace="default" >>> [ 48.952388] NET: Registered protocol family 10 >>> [ 48.952852] lo: Disabled Privacy Extensions >>> [ 50.404479] Bluetooth: Core ver 2.11 >>> [ 50.404858] NET: Registered protocol family 31 >>> [ 50.404864] Bluetooth: HCI device and connection manager initialized >>> [ 50.404871] Bluetooth: HCI socket layer initialized >>> [ 50.471186] Bluetooth: L2CAP ver 2.9 >>> [ 50.471195] Bluetooth: L2CAP socket layer initialized >>> [ 50.569202] Bluetooth: RFCOMM socket layer initialized >>> [ 50.569223] Bluetooth: RFCOMM TTY layer initialized >>> [ 50.569227] Bluetooth: RFCOMM ver 1.8 >>> [ 50.775034] r8169: eth0: link up >>> [ 52.174818] NET: Registered protocol family 17 >>> [ 65.454676] CPU0 attaching NULL sched-domain. >>> [ 65.454687] CPU1 attaching NULL sched-domain. >>> [ 65.459351] CPU0 attaching sched-domain: >>> [ 65.459362] domain 0: span 03 >>> [ 65.459367] groups: 01 02 >>> [ 65.459373] CPU1 attaching sched-domain: >>> [ 65.459377] domain 0: span 03 >>> [ 65.459380] groups: 02 01 >>> [ 73.153942] UDF-fs: No VRS found >>> [ 73.178375] ISO 9660 Extensions: Microsoft Joliet Level 3 >>> [ 73.389942] ISOFS: changing to secondary root >>> [ 76.466197] atkbd.c: Unknown key pressed (translated set 2, code 0xf6 >>> on >>> isa0060/serio0). >>> [ 76.466209] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>> known. >>> [ 76.566510] atkbd.c: Unknown key released (translated set 2, code 0xf6 >>> on >>> isa0060/serio0). >>> [ 76.566519] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>> known. >>> [ 76.671452] wmaster0: Selected rate control algorithm 'iwl-3945-rs' >>> [ 76.874415] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>> [ 81.572469] NETDEV WATCHDOG: eth0: transmit timed out >>> [ 81.845751] r8169: eth0: link up >>> [ 92.756596] NETDEV WATCHDOG: eth0: transmit timed out >>> [ 93.049381] r8169: eth0: link up >>> [ 97.659156] wlan0: Initial auth_alg=0 >>> [ 97.659168] wlan0: authenticate with AP 00:02:6f:45:59:71 >>> [ 97.661681] wlan0: Initial auth_alg=0 >>> [ 97.661690] wlan0: authenticate with AP 00:02:6f:45:59:71 >>> [ 97.662510] wlan0: Initial auth_alg=0 >>> [ 97.662518] wlan0: authenticate with AP 00:02:6f:45:59:71 >>> [ 97.671569] wlan0: RX authentication from 00:02:6f:45:59:71 (alg=0 >>> transaction=2 status=0) >>> [ 97.671581] wlan0: authenticated >>> [ 97.671586] wlan0: associate with AP 00:02:6f:45:59:71 >>> [ 97.674286] wlan0: authentication frame received from >>> 00:02:6f:45:59:71, >>> but not in authenticate state - ignored >>> [ 97.675732] wlan0: authentication frame received from >>> 00:02:6f:45:59:71, >>> but not in authenticate state - ignored >>> [ 97.679234] wlan0: RX AssocResp from 00:02:6f:45:59:71 (capab=0x1 >>> status=0 aid=11) >>> [ 97.679245] wlan0: associated >>> [ 97.683747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>> [ 98.781032] wlan0: no IPv6 routers present >>> ========== >>> On Fri, 11 Jul 2008 08:12:41 -0400 >>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> RE: modem is Agere Systems HDA Modem >>>> Roan from the Details tab of the Driver information, the Device >>>> information is needed >>>> 11C1 is the Agere Vendor designation, Likely the Device is either 1040 >>>> or 3026, which need entirely different support. >>>> >>>> Also please do >>>> $ lsmod >> roan.txt >>>> $ dmesg >> roan.txt >>>> and send us the roan.txt >>>> >>>> Is the Audio functioning? >>>> >>>> MarvS >>>> >>>> On Fri, Jul 11, 2008 at 2:36 AM, roan <roan@xxxxxxxx> wrote: >>>>> >>>>> my modem is Agere Systems HDA Modem >>>>> >>>>> >>>>> On Thu, 10 Jul 2008 17:59:04 -0400 >>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> >>>>>> Roan, >>>>>> >>>>>> I presume your modem is internal and Not one of >>>>>> Attached USB devices: >>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>> ID 0c45:62c0 Microdia. >>>>>> >>>>>> Read the Softmodem.txt for instructions for doing modem diagnositcs >>>>>> under Microsoft. >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Thu, Jul 10, 2008 at 1:07 PM, roan <roan@xxxxxxxx> wrote: >>>>>>> >>>>>>> thx for an answer, Marvin >>>>>>> i did all as you said, but $ sudo wvdialconf /etc/wvdial.conf now >>>>>>> says >>>>>>> this: >>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>> Editing `/etc/wvdial.conf'. >>>>>>> >>>>>>> Scanning your serial ports for a modem. >>>>>>> >>>>>>> Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to >>>>>>> it. >>>>>>> Modem Port Scan<*1>: SHSF0 S0 S1 S2 S3 SHSF1 SHSF2 SHSF3 >>>>>>> Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7 >>>>>>> >>>>>>> >>>>>>> Sorry, no modem was detected! Is it in use by another program? >>>>>>> Did you configure it properly with setserial? >>>>>>> >>>>>>> what alse should i do? >>>>>>> thx in advance >>>>>>> >>>>>>> On Thu, 10 Jul 2008 07:45:02 -0400 >>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>> >>>>>>>> Roan >>>>>>>> >>>>>>>> Your most likely situation is: >>>>>>>> >>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in their >>>>>>>> Subsystem, >>>>>>>> and many are supported by the ALSA audio+modem driver snd-hda-intel >>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>> If another modem card is present, then most likely 8086:284b does >>>>>>>> not >>>>>>>> host a modem. >>>>>>>> If another modem card has not been detected, then possibilities are: >>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>> chips >>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>> >>>>>>>> so try >>>>>>>> >>>>>>>> From >>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>> download >>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>> Under Linux unpack with: >>>>>>>> $ unzip hsfmodem*.zip >>>>>>>> Then install with: >>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>> Subsequently, the modem should be found with >>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>> Edit in your personal information with: >>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>> and try dialing out with: >>>>>>>> $ sudo wvdial. >>>>>>>> See DOCs/Testing.txt for details. >>>>>>>> Read DOCs/Conexant.txt >>>>>>>> >>>>>>>> Please report back after thus testing, >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Thu, Jul 10, 2008 at 7:16 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>> >>>>>>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx >>>>>>>>> List >>>>>>>>> Server, >>>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>>>> YourName, YourCountry kernel 2.6.24-18-generic >>>>>>>>> With this Subject Line cogent experts will be alerted, and useful >>>>>>>>> case >>>>>>>>> names left in the Archive. >>>>>>>>> YourCountry will enable Country specific guidance. Linux experts >>>>>>>>> in >>>>>>>>> YourCountry >>>>>>>>> can be found through: http://www.linux.org/groups/index.html. >>>>>>>>> They will know your Country's modem code, which may be essential >>>>>>>>> for >>>>>>>>> dialup >>>>>>>>> service. >>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>>>>>> Internet >>>>>>>>> Provider mail filters. >>>>>>>>> So in a day, also check the Archived responses at >>>>>>>>> http://www.linmodems.org >>>>>>>>> -------------------------- System information >>>>>>>>> ---------------------------- >>>>>>>>> CPU=i686, >>>>>>>>> Linux version 2.6.24-18-generic (buildd@terranova) (gcc version >>>>>>>>> 4.2.3 >>>>>>>>> (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 >>>>>>>>> scanModem update of: 2008_06_28 >>>>>>>>> >>>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>>>>>> Attached USB devices are: >>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>> ID 0c45:62c0 Microdia >>>>>>>>> >>>>>>>>> USB modems not recognized >>>>>>>>> >>>>>>>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>>>>>>> diagnostics are: >>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: Intel >>>>>>>>> Corporation 82801H >>>>>>>>> >>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA >>>>>>>>> Intel >>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 34.842316] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>>>> 64 >>>>>>>>> >>>>>>>>> >>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>> modems. >>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>> folders. >>>>>>>>> >>>>>>>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>>> The drivers are in the kernel modules tree at: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> /lib/modules/2.6.24-18-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>> >>>>>>>>> The ALSA verion is 1.0.15 >>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>> >>>>>>>>> >>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>> ----------------------- >>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>> >>>>>>>>> about /proc/asound/cards: >>>>>>>>> ------------------------ >>>>>>>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>>>>>>> HDA Intel at 0xf9ff8000 irq 21 >>>>>>>>> === Finished firmware and bootup diagnostics, next deducing cogent >>>>>>>>> software. >>>>>>>>> === >>>>>>>>> >>>>>>>>> A candidate modem is not evident among the PCI devices: >>>>>>>>> ------------------------------------------------ >>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD >>>>>>>>> Audio >>>>>>>>> Controller (rev 03) >>>>>>>>> 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM >>>>>>>>> (ICH8M/ICH8M-E) >>>>>>>>> SATA >>>>>>>>> IDE Controller (rev 03) >>>>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M >>>>>>>>> G >>>>>>>>> (rev >>>>>>>>> a1) >>>>>>>>> 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG >>>>>>>>> Network >>>>>>>>> Connection (rev 02) >>>>>>>>> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>>>>>>> RTL8111/8168B >>>>>>>>> PCI Express Gigabit Ethernet controller (rev 01) >>>>>>>>> 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD >>>>>>>>> Controller >>>>>>>>> (rev >>>>>>>>> 02) >>>>>>>>> 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD >>>>>>>>> Controller >>>>>>>>> (rev 01) >>>>>>>>> 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) >>>>>>>>> (rev >>>>>>>>> 02) >>>>>>>>> ------------------------------------------------ >>>>>>>>> with USB and bridge devices not displayed. >>>>>>>>> >>>>>>>>> If your modem is connected by an external serial cable, >>>>>>>>> or mounted internally on an ISA card, scanModem would not access >>>>>>>>> it. >>>>>>>>> Try with Root permission >>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>> to detect these modem types and some USB modems. >>>>>>>>> If the detection is successful, read the DOCs/wvdial.txt . >>>>>>>>> Edit the /etc/wvdial.conf with Root permission: >>>>>>>>> sudo gedit /etc/wvdial.conf >>>>>>>>> will be able to dial out with Root permission: >>>>>>>>> sudo wvdial >>>>>>>>> >>>>>>>>> Many modems for which scanModem fails have Conexant chips. >>>>>>>>> From http://www.linuxant.com/drivers/modemident.php >>>>>>>>> get the ListModem tool, which will report on Conexant chipset >>>>>>>>> modems >>>>>>>>> >>>>>>>>> If the above tests fail, please provide any independent >>>>>>>>> information >>>>>>>>> available on your modem. >>>>>>>>> If an alternative boot into Microsoft windows can be done, do >>>>>>>>> mouse >>>>>>>>> clicks on: >>>>>>>>> Start > Settings > Control Panel > Classical View (for Window XP) >>>>>>>>> > >>>>>>>>> System >>>>>>>>>> >>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>> Double >>>>>>>>>> click >>>>>>>>>> to >>>>>>>>> >>>>>>>>> expand the graphic. Manufacturer information may be displayed. For >>>>>>>>> example, >>>>>>>>> CXT >>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any hardware >>>>>>>>> ID >>>>>>>>> or >>>>>>>>> vendor >>>>>>>>> and device information. From the Driver Details TAB, copy out the >>>>>>>>> VENdor >>>>>>>>> and >>>>>>>>> DEVice information. >>>>>>>>> Next do the Query Modem and record the ATI specifications displayed >>>>>>>>> such >>>>>>>>> as: >>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>> Try to identify the modem setup file, with name perhaps MODEM.INF. >>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>> >>>>>>>>> The /proc/asound/ audio+modem diagostics are being copied. >>>>>>>>> Finished copy to Modem/ALSAroot.tgz >>>>>>>>> >>>>>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>>>>> Modem chipset not detected on >>>>>>>>> NAME="Audio device: Intel Corporation 82801H " >>>>>>>>> CLASS=0403 >>>>>>>>> PCIDEV=8086:284b >>>>>>>>> SUBSYS=1462:3fe9 >>>>>>>>> IRQ=21 >>>>>>>>> HDA=8086:284b >>>>>>>>> SOFT=8086:284b.HDA >>>>>>>>> >>>>>>>>> >>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in their >>>>>>>>> Subsystem, >>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>> snd-hda-intel >>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>> If another modem card is present, then most likely 8086:284b does >>>>>>>>> not >>>>>>>>> host >>>>>>>>> a modem. >>>>>>>>> If another modem card has not been detected, then possibilities >>>>>>>>> are: >>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>>> chips >>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>> 2) The modem may be of the older non-PCI Controller Chipset >>>>>>>>> (hardware) type. >>>>>>>>> Try detection with Root permission: >>>>>>>>> sudo wvdialconf /etc/wvdial.conf >>>>>>>>> >>>>>>>>> For candidate modem in: 00:1b.0 >>>>>>>>> 0403 Audio device: Intel Corporation 82801H >>>>>>>>> Primary device ID: 8086:284b >>>>>>>>> Subsystem PCI_id 1462:3fe9 >>>>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>>>> from Archives: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Support type needed or chipset: >>>>>>>>> >>>>>>>>> Support can likely be achieved through two mutually exclusive >>>>>>>>> alternatives: >>>>>>>>> 1) The hsfmodem software for Conexant chipset modems: Read >>>>>>>>> DOCs/Conexant.txt >>>>>>>>> The following ALSA alternative CANNOT work with Conexant modems. >>>>>>>>> >>>>>>>>> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for >>>>>>>>> details, >>>>>>>>> and >>>>>>>>> to test get the package SLMODEMD.gcc4.2.tar.gz from: >>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>> >>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>> >>>>>>>>> Writing DOCs/Intel.txt >>>>>>>>> >>>>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source >>>>>>>>> package >>>>>>>>> with full speed enabled is available, but requires driver >>>>>>>>> compiling. >>>>>>>>> Read >>>>>>>>> DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> From >>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>> download >>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>> Under Linux unpack with: >>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>> Then install with: >>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>> Subsequently, the modem should be found with >>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>> Edit in your personal information with: >>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>> and try dialing out with: >>>>>>>>> $ sudo wvdial. >>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> Writing DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>> ============ end Smartlink section ===================== >>>>>>>>> >>>>>>>>> >>>>>>>>> The base of the UDEV device file system is: /dev/.udev >>>>>>>>> >>>>>>>>> Versions adequately match for the compiler installed: 4.2.3 >>>>>>>>> and the compiler used in kernel assembly: 4.2.3 >>>>>>>>> >>>>>>>>> >>>>>>>>> Minimal compiling resources appear complete: >>>>>>>>> make utility - /usr/bin/make >>>>>>>>> Compiler version 4.2 >>>>>>>>> linuc_headers base folder /lib/modules/2.6.24-18-generic/build >>>>>>>>> >>>>>>>>> However some compilations and executable functions may need >>>>>>>>> additional >>>>>>>>> files, >>>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>>>>>> installed >>>>>>>>> in >>>>>>>>> /usr/include/ . >>>>>>>>> For martian_modem, additional required packages are libc6-dev (and >>>>>>>>> for >>>>>>>>> Debian/Ubuntu, >>>>>>>>> linux-libc-dev). The also required headers of package libc6 are >>>>>>>>> commonly >>>>>>>>> installed by default. >>>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>>>>>> libc6-dev >>>>>>>>> packages, for kernels 2.6.24 and later versions. >>>>>>>>> In not included on your install CD, search for them at >>>>>>>>> http://packages.ubuntu.com >>>>>>>>> or comparable Repository for other Linux distros. >>>>>>>>> When compiling ALSA drivers, the utility "patch" will also be >>>>>>>>> needed. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> If a driver compilation fails, with message including some lack of >>>>>>>>> some >>>>>>>>> FileName.h (stdio.h for example), then >>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>> /usr/include. >>>>>>>>> The >>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>>>>>> >>>>>>>>> If an alternate ethernet connection is available, >>>>>>>>> $ apt-get update >>>>>>>>> $ apt-get -s install linux-kernel-devel >>>>>>>>> will install needed packages. >>>>>>>>> For Debian/Ubuntu related distributions, run the following command >>>>>>>>> to >>>>>>>>> display the needed package list: >>>>>>>>> >>>>>>>>> Otherwise packages have to be found through >>>>>>>>> http://packages.ubuntu.com >>>>>>>>> Once downloaded and transferred into a Linux partition, >>>>>>>>> they can be installed alltogether with: >>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>> >>>>>>>>> >>>>>>>>> Checking pppd properties: >>>>>>>>> -rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 /usr/sbin/pppd >>>>>>>>> >>>>>>>>> In case of an "error 17" "serial loopback" problem, see: >>>>>>>>> >>>>>>>>> >>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>>>>>> >>>>>>>>> To enable dialout without Root permission do: >>>>>>>>> $ su - root (not for Ubuntu) >>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>> >>>>>>>>> Checking settings of: /etc/ppp/options >>>>>>>>> asyncmap 0 >>>>>>>>> noauth >>>>>>>>> crtscts >>>>>>>>> lock >>>>>>>>> hide-password >>>>>>>>> modem >>>>>>>>> proxyarp >>>>>>>>> lcp-echo-interval 30 >>>>>>>>> lcp-echo-failure 4 >>>>>>>>> noipx >>>>>>>>> >>>>>>>>> In case of a message like: >>>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>>>>>>> see >>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>>>>>> >>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>> >>>>>>>>> Don't worry about the following, it is for experts should trouble >>>>>>>>> shooting >>>>>>>>> be necessary. >>>>>>>>> ========================================================== >>>>>>>>> >>>>>>>>> Checking for modem support lines: >>>>>>>>> -------------------------------------- >>>>>>>>> /device/modem symbolic link: >>>>>>>>> slmodemd created symbolic link /dev/ttySL0: >>>>>>>>> Within /etc/udev/ files: >>>>>>>>> >>>>>>>>> Within /etc/modprobe.conf files: >>>>>>>>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>>>>>>>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>>>>>>>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order >>>>>>>>> to >>>>>>>>> blacklist unwanted modem drivers >>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>>>>>>>> Within any ancient /etc/devfs files: >>>>>>>>> >>>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>>>>>> >>>>>>>>> --------- end modem support lines -------- >>>>>>>>> --- >>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>> >>>>>>> >>>>>>> --- >>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>> >>>>> >>>>> --- >>>>> Professional hosting for everyone - http://www.host.ru >>>>> >>> >>> --- >>> Professional hosting for everyone - http://www.host.ru >>> > > --- > Professional hosting for everyone - http://www.host.ru >
