Roan, Follow Instructions for upgrading snd-hda-intel and its dependent driver set are at: http://linmodems.technion.ac.il/archive-seventh/msg00282.htm Upgrade to ALSA version 1.0.16. This has solved problems comparable to yours on other System. Reboot Recheck the $ cat /proc/asound/pcm MarvS On Wed, Jul 16, 2008 at 12:48 PM, roan <roan@xxxxxxxx> wrote: > yes, audio is working > > > On Wed, 16 Jul 2008 10:55:58 -0400 > "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >> >> Roan >> >> Is audio working >> >> MarvS >> >> On Wed, Jul 16, 2008 at 10:21 AM, roan <roan@xxxxxxxx> wrote: >>> >>> it seems that blacklisting didn't help >>> $ sudo cat /proc/asound/pcm still says the same: >>> --------------- >>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>> --------------- >>> >>> On Mon, 14 Jul 2008 08:06:10 -0400 >>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> Roan >>>> >>>> $ sudo cat /proc/asound/pcm >>>> The sudo probably isn't necessary. >>>> >>>> More later. Regulat job now >>>> >>>> MarvS >>>> >>>> On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx> wrote: >>>>> >>>>> first of all i can say that the modem is working with kernel 2.6.21 >>>>> but i didn't succeed to make it work under my 2.6.24-19 >>>>> downloaded agrsm-20080626.tar.gz >>>>> tried to make install, but it says that some needed files are missing. >>>>> don't >>>>> know which ones :( >>>>> >>>>> on another hand i blacklisted this list of modules you sent me in file >>>>> /etc/modeprobe.d/blacklist >>>>> ------ >>>>> scsi_mod >>>>> ehci_hcd >>>>> uhci_hcd >>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>> >>>>> shpchp 34452 0 >>>>> >>>>> pci_hotplug 30880 1 shpchp >>>>> >>>>> pcspkr 4224 0 >>>>> >>>>> sr_mod 17956 1 >>>>> >>>>> cdrom 37408 1 sr_mod >>>>> >>>>> sd_mod 30720 4 >>>>> >>>>> pcmcia_core >>>>> >>>>> uvcvideo 58116 0 >>>>> >>>>> iwl3945 89844 0 >>>>> >>>>> compat_ioctl32 2304 1 uvcvideo >>>>> >>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>> >>>>> videodev 29440 1 uvcvideo >>>>> >>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>> >>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>> >>>>> video 19856 8 >>>>> >>>>> rfcomm 41744 2 >>>>> >>>>> l2cap 25728 13 rfcomm >>>>> >>>>> bluetooth 61156 4 rfcomm,l2cap >>>>> >>>>> snd_atiixp_modem 17672 0 >>>>> >>>>> snd_via82xx_modem 16392 0 >>>>> >>>>> snd_intel8x0m >>>>> ------ >>>>> but nothing changed: the $ /proc/asound/pcm still says "permission >>>>> denied" >>>>> or when i do it with sudo it says " no such file..." >>>>> >>>>> so please tell me what i need to do to make modem working on 2.6.24-19 >>>>> kernel? >>>>> thx in advance >>>>> >>>>> >>>>> On Sat, 12 Jul 2008 09:41:01 -0400 >>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> >>>>>> Bjorn, >>>>>> >>>>>> Would you please work with Roan, to get his >>>>>> CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc version 4.2 >>>>>> with >>>>>> PCI slot PCI ID SubsystemID Name >>>>>> ---------- --------- --------- -------------- >>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: Intel >>>>>> Corporation 82801H >>>>>> having the 11c11040 Agere chip on Subsystem 1462:3fe9 >>>>>> >>>>>> Modem interrupt assignment and sharing: >>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel >>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, >>>>>> low) -> IRQ 21 >>>>>> [ 34.842316] PCI: Setting latency timer of device 0000:00:1b.0 to 64 >>>>>> >>>>>> The ALSA verion is 1.0.15 >>>>>> >>>>>> The /proc/asound/pcm file reports: >>>>>> ----------------------- >>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>> --------------- >>>>>> but there is no expected Modem line, like >>>>>> 00-06: Something Modem >>>>>> so there is probably a resource conflict to be dealt with and/or an >>>>>> ALSA version upgradeto 1.0.16 may be necessary. >>>>>> >>>>>> Roan >>>>>> Detach any external devices which are not Essential (USB and PCMCIA >>>>>> etc.). >>>>>> or you can disable the usage through an edit in: >>>>>> $ sudo gedit /etc/discover.conf >>>>>> Of course you must retain ide and pci services >>>>>> >>>>>> You can also less globally blacklist non-essential modules, to free up >>>>>> resources. >>>>>> See >>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html >>>>>> on blacklisting guidance. >>>>>> Modules non essential on your System for dialup include: >>>>>> scsi_mod needed for USB drivers >>>>>> ehci_hcd USB2 >>>>>> uhci_hcd other USB >>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>> shpchp 34452 0 >>>>>> pci_hotplug 30880 1 shpchp >>>>>> pcspkr 4224 0 >>>>>> sr_mod 17956 1 >>>>>> cdrom 37408 1 sr_mod >>>>>> sd_mod 30720 4 >>>>>> pcmcia_core >>>>>> uvcvideo 58116 0 >>>>>> iwl3945 89844 0 >>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>> videodev 29440 1 uvcvideo >>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>> video 19856 8 >>>>>> rfcomm 41744 2 >>>>>> l2cap 25728 13 rfcomm >>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>> snd_atiixp_modem 17672 0 >>>>>> snd_via82xx_modem 16392 0 >>>>>> snd_intel8x0m modem driver also, not for your HDA system >>>>>> >>>>>> Then after a reboot, do >>>>>> $ /proc/asound/pcm >>>>>> to assess if a modem line is present. >>>>>> >>>>>> Another fast thing you can try is from >>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >>>>>> agrsm_howto.txt and the linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb >>>>>> which already includes agrmodem + agrserial drivers. Install with: >>>>>> $ sudo dpkg -i linux-image*.deb >>>>>> Then reboot under the new 2.6.21.0-22 kernel and run through the tests >>>>>> described in agrsm_howto.txt, except compiling & driver installation >>>>>> is already done. >>>>>> While lacking this modem hardware, >>>>>> linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not cause any >>>>>> problems on my otherwise Ubuntu system. It is Debian repackaging of >>>>>> the Fedora like kernel-2.6.21.0-22.i686.rpm , which I did. >>>>>> >>>>>> Joern will direct you with respect to further getting service under >>>>>> 2.6.24 kernels. >>>>>> The current Mandiva Linux release with 2.4.26 kernels does have a >>>>>> package >>>>>> dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm supporting the 11c11040 chip >>>>>> modem. >>>>>> >>>>>> MarvS >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx> wrote: >>>>>>> >>>>>>> from the driver information i found out that the device is 1040 >>>>>>> there is ven=11c1 and dev=1040 >>>>>>> here is the info from lsmod and dmesg >>>>>>> ========== >>>>>>> Module Size Used by >>>>>>> arc4 2944 2 >>>>>>> ecb 4480 2 >>>>>>> blkcipher 8324 1 ecb >>>>>>> nls_iso8859_1 4992 1 >>>>>>> nls_cp437 6656 1 >>>>>>> isofs 36388 1 >>>>>>> vfat 14464 1 >>>>>>> fat 54556 1 vfat >>>>>>> udf 88612 0 >>>>>>> af_packet 23812 6 >>>>>>> rfcomm 41744 2 >>>>>>> l2cap 25728 13 rfcomm >>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>> ipv6 267780 14 >>>>>>> ppdev 10372 0 >>>>>>> snd_atiixp_modem 17672 0 >>>>>>> snd_via82xx_modem 16392 0 >>>>>>> snd_intel8x0m 19084 0 >>>>>>> snd_ac97_codec 101156 3 >>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m >>>>>>> ac97_bus 3072 1 snd_ac97_codec >>>>>>> acpi_cpufreq 10796 1 >>>>>>> cpufreq_stats 7104 0 >>>>>>> cpufreq_conservative 8712 0 >>>>>>> cpufreq_ondemand 9740 1 >>>>>>> freq_table 5536 3 >>>>>>> acpi_cpufreq,cpufreq_stats,cpufreq_ondemand >>>>>>> cpufreq_userspace 5284 0 >>>>>>> cpufreq_powersave 2688 0 >>>>>>> sbs 15112 0 >>>>>>> sbshc 7680 1 sbs >>>>>>> container 5632 0 >>>>>>> dock 11280 0 >>>>>>> iptable_filter 3840 0 >>>>>>> ip_tables 14820 1 iptable_filter >>>>>>> x_tables 16132 1 ip_tables >>>>>>> coretemp 8448 0 >>>>>>> sbp2 24072 0 >>>>>>> parport_pc 36260 0 >>>>>>> lp 12324 0 >>>>>>> parport 37832 3 ppdev,parport_pc,lp >>>>>>> snd_hda_intel 351908 3 >>>>>>> snd_pcm_oss 42528 0 >>>>>>> snd_mixer_oss 18048 1 snd_pcm_oss >>>>>>> snd_pcm 78852 6 >>>>>>> >>>>>>> >>>>>>> >>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss >>>>>>> snd_page_alloc 11656 5 >>>>>>> >>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm >>>>>>> snd_hwdep 10628 1 snd_hda_intel >>>>>>> joydev 13120 0 >>>>>>> mmc_block 14980 1 >>>>>>> snd_seq_dummy 4996 0 >>>>>>> pcmcia 40876 0 >>>>>>> snd_seq_oss 35456 0 >>>>>>> snd_seq_midi 9504 0 >>>>>>> snd_rawmidi 25888 1 snd_seq_midi >>>>>>> uvcvideo 58116 0 >>>>>>> iwl3945 89844 0 >>>>>>> snd_seq_midi_event 8576 2 snd_seq_oss,snd_seq_midi >>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>> snd_seq 54096 6 >>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>>>>>> nvidia 7825536 36 >>>>>>> videodev 29440 1 uvcvideo >>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>> video 19856 8 >>>>>>> psmouse 40336 0 >>>>>>> ac 6916 0 >>>>>>> sdhci 19076 0 >>>>>>> battery 14212 0 >>>>>>> snd_timer 24964 2 snd_pcm,snd_seq >>>>>>> cfg80211 15112 1 iwlwifi_mac80211 >>>>>>> i2c_core 24832 1 nvidia >>>>>>> output 4736 1 video >>>>>>> serio_raw 7940 0 >>>>>>> mmc_core 51460 2 mmc_block,sdhci >>>>>>> snd_seq_device 9740 5 >>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>>>>>> yenta_socket 27276 1 >>>>>>> rsrc_nonstatic 13696 1 yenta_socket >>>>>>> pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic >>>>>>> snd 56996 21 >>>>>>> >>>>>>> >>>>>>> >>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>>>> evdev 13056 6 >>>>>>> button 9232 0 >>>>>>> iTCO_wdt 13092 0 >>>>>>> iTCO_vendor_support 4868 1 iTCO_wdt >>>>>>> intel_agp 25492 0 >>>>>>> agpgart 34760 2 nvidia,intel_agp >>>>>>> soundcore 8800 1 snd >>>>>>> shpchp 34452 0 >>>>>>> pci_hotplug 30880 1 shpchp >>>>>>> pcspkr 4224 0 >>>>>>> ext3 136712 1 >>>>>>> jbd 48404 1 ext3 >>>>>>> mbcache 9600 1 ext3 >>>>>>> sg 36880 0 >>>>>>> sr_mod 17956 1 >>>>>>> cdrom 37408 1 sr_mod >>>>>>> sd_mod 30720 4 >>>>>>> ata_generic 8324 0 >>>>>>> pata_acpi 8320 0 >>>>>>> usbhid 31872 0 >>>>>>> hid 38784 1 usbhid >>>>>>> ohci1394 33584 0 >>>>>>> ata_piix 19588 4 >>>>>>> ieee1394 93752 2 sbp2,ohci1394 >>>>>>> r8169 32900 0 >>>>>>> libata 159344 3 ata_generic,pata_acpi,ata_piix >>>>>>> scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata >>>>>>> ehci_hcd 37900 0 >>>>>>> uhci_hcd 27024 0 >>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>> thermal 16796 0 >>>>>>> processor 36872 4 acpi_cpufreq,thermal >>>>>>> fan 5636 0 >>>>>>> fuse 50580 5 >>>>>>> vesafb 8964 1 >>>>>>> fbcon 42912 72 >>>>>>> tileblit 3456 1 fbcon >>>>>>> font 9472 1 fbcon >>>>>>> bitblit 6784 1 fbcon >>>>>>> softcursor 3072 1 bitblit >>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>>>> [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) >>>>>>> (gcc >>>>>>> version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC >>>>>>> 2008 >>>>>>> (Ubuntu 2.6.24-18.32-generic) >>>>>>> [ 0.000000] BIOS-provided physical RAM map: >>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 >>>>>>> (usable) >>>>>>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 >>>>>>> (reserved) >>>>>>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 >>>>>>> (reserved) >>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 >>>>>>> (usable) >>>>>>> [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI >>>>>>> data) >>>>>>> [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI >>>>>>> NVS) >>>>>>> [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 >>>>>>> (reserved) >>>>>>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 >>>>>>> (reserved) >>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 >>>>>>> (reserved) >>>>>>> [ 0.000000] 1151MB HIGHMEM available. >>>>>>> [ 0.000000] 896MB LOWMEM available. >>>>>>> [ 0.000000] found SMP MP-table at 000ff780 >>>>>>> [ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of >>>>>>> 256 >>>>>>> used >>>>>>> [ 0.000000] Zone PFN ranges: >>>>>>> [ 0.000000] DMA 0 -> 4096 >>>>>>> [ 0.000000] Normal 4096 -> 229376 >>>>>>> [ 0.000000] HighMem 229376 -> 524208 >>>>>>> [ 0.000000] Movable zone start PFN for each node >>>>>>> [ 0.000000] early_node_map[1] active PFN ranges >>>>>>> [ 0.000000] 0: 0 -> 524208 >>>>>>> [ 0.000000] On node 0 totalpages: 524208 >>>>>>> [ 0.000000] DMA zone: 32 pages used for memmap >>>>>>> [ 0.000000] DMA zone: 0 pages reserved >>>>>>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 >>>>>>> [ 0.000000] Normal zone: 1760 pages used for memmap >>>>>>> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 >>>>>>> [ 0.000000] HighMem zone: 2303 pages used for memmap >>>>>>> [ 0.000000] HighMem zone: 292529 pages, LIFO batch:31 >>>>>>> [ 0.000000] Movable zone: 0 pages used for memmap >>>>>>> [ 0.000000] DMI present. >>>>>>> [ 0.000000] ACPI: RSDP signature @ 0xC00F84A0 checksum 0 >>>>>>> [ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM) >>>>>>> [ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB MEGABOOK 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707 FACP1702 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636 M1636000 0 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 0.000000] ACPI: FACS 7FFBE000, 0040 >>>>>>> [ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707 APIC1702 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707 OEMMCFG 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB MEGABOOK 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707 OEMB1702 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707 OEMHPET 20070517 >>>>>>> MSFT >>>>>>> 97) >>>>>>> [ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef CpuPm 3000 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x808 >>>>>>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>>>>> [ 0.000000] Processor #0 6:15 APIC version 20 >>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>>>>>> [ 0.000000] Processor #1 6:15 APIC version 20 >>>>>>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] >>>>>>> gsi_base[0]) >>>>>>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, >>>>>>> GSI >>>>>>> 0-23 >>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >>>>>>> dfl) >>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>>>>>> level) >>>>>>> [ 0.000000] ACPI: IRQ0 used by override. >>>>>>> [ 0.000000] ACPI: IRQ2 used by override. >>>>>>> [ 0.000000] ACPI: IRQ9 used by override. >>>>>>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs >>>>>>> [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 >>>>>>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>>>>>> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: >>>>>>> 80000000:7ee00000) >>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>> 000000000009f000 >>>>>>> - >>>>>>> 00000000000a0000 >>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>> 00000000000a0000 >>>>>>> - >>>>>>> 00000000000e0000 >>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>> 00000000000e0000 >>>>>>> - >>>>>>> 0000000000100000 >>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>>>>>> Total >>>>>>> pages: 520113 >>>>>>> [ 0.000000] Kernel command line: >>>>>>> root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash vga=789 >>>>>>> quiet >>>>>>> [ 0.000000] mapped APIC to ffffb000 (fee00000) >>>>>>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) >>>>>>> [ 0.000000] Enabling fast FPU save and restore... done. >>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done. >>>>>>> [ 0.000000] Initializing CPU#0 >>>>>>> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) >>>>>>> [ 0.000000] Detected 1795.565 MHz processor. >>>>>>> [ 24.138347] Console: colour dummy device 80x25 >>>>>>> [ 24.138350] console [tty0] enabled >>>>>>> [ 24.138603] Dentry cache hash table entries: 131072 (order: 7, >>>>>>> 524288 >>>>>>> bytes) >>>>>>> [ 24.138876] Inode-cache hash table entries: 65536 (order: 6, >>>>>>> 262144 >>>>>>> bytes) >>>>>>> [ 24.226903] Memory: 2066816k/2096832k available (2176k kernel >>>>>>> code, >>>>>>> 28700k reserved, 1006k data, 368k init, 1179328k highmem) >>>>>>> [ 24.226909] virtual kernel memory layout: >>>>>>> [ 24.226910] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) >>>>>>> [ 24.226911] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>>>>>> [ 24.226912] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>>>>>> [ 24.226913] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>>>>>> [ 24.226914] .init : 0xc0421000 - 0xc047d000 ( 368 kB) >>>>>>> [ 24.226915] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) >>>>>>> [ 24.226916] .text : 0xc0100000 - 0xc03201f4 (2176 kB) >>>>>>> [ 24.226919] Checking if this processor honours the WP bit even in >>>>>>> supervisor mode... Ok. >>>>>>> [ 24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1, >>>>>>> MinObjects=4, >>>>>>> CPUs=2, Nodes=1 >>>>>>> [ 24.227097] hpet clockevent registered >>>>>>> [ 24.307060] Calibrating delay using timer specific routine.. >>>>>>> 3595.17 >>>>>>> BogoMIPS (lpj=7190350) >>>>>>> [ 24.307082] Security Framework initialized >>>>>>> [ 24.307088] SELinux: Disabled at boot. >>>>>>> [ 24.307100] AppArmor: AppArmor initialized >>>>>>> [ 24.307103] Failure registering capabilities with primary security >>>>>>> module. >>>>>>> [ 24.307111] Mount-cache hash table entries: 512 >>>>>>> [ 24.307223] Initializing cgroup subsys ns >>>>>>> [ 24.307228] Initializing cgroup subsys cpuacct >>>>>>> [ 24.307237] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>> 00000000 >>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>> [ 24.307244] monitor/mwait feature present. >>>>>>> [ 24.307246] using mwait in idle threads. >>>>>>> [ 24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>> [ 24.307252] CPU: L2 cache: 2048K >>>>>>> [ 24.307254] CPU: Physical Processor ID: 0 >>>>>>> [ 24.307255] CPU: Processor Core ID: 0 >>>>>>> [ 24.307257] CPU: After all inits, caps: bfebfbff 20100000 00000000 >>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>> [ 24.307266] Compat vDSO mapped to ffffe000. >>>>>>> [ 24.307278] Checking 'hlt' instruction... OK. >>>>>>> [ 24.323404] SMP alternatives: switching to UP code >>>>>>> [ 24.324901] Early unpacking initramfs... done >>>>>>> [ 24.643306] ACPI: Core revision 20070126 >>>>>>> [ 24.643345] ACPI: Looking for DSDT in initramfs... error, file >>>>>>> /DSDT.aml >>>>>>> not found. >>>>>>> [ 24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>> stepping >>>>>>> 0d >>>>>>> [ 24.645818] SMP alternatives: switching to SMP code >>>>>>> [ 24.646454] Booting processor 1/1 eip 3000 >>>>>>> [ 24.656641] Initializing CPU#1 >>>>>>> [ 24.734815] Calibrating delay using timer specific routine.. >>>>>>> 3590.98 >>>>>>> BogoMIPS (lpj=7181974) >>>>>>> [ 24.734821] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>> 00000000 >>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>> [ 24.734826] monitor/mwait feature present. >>>>>>> [ 24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>> [ 24.734830] CPU: L2 cache: 2048K >>>>>>> [ 24.734832] CPU: Physical Processor ID: 0 >>>>>>> [ 24.734833] CPU: Processor Core ID: 1 >>>>>>> [ 24.734835] CPU: After all inits, caps: bfebfbff 20100000 00000000 >>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>> [ 24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>> stepping >>>>>>> 0d >>>>>>> [ 24.735413] Total of 2 processors activated (7186.16 BogoMIPS). >>>>>>> [ 24.735588] ENABLING IO-APIC IRQs >>>>>>> [ 24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>>>>> [ 24.882841] checking TSC synchronization [CPU#0 -> CPU#1]: passed. >>>>>>> [ 24.902845] Brought up 2 CPUs >>>>>>> [ 24.902867] CPU0 attaching sched-domain: >>>>>>> [ 24.902869] domain 0: span 03 >>>>>>> [ 24.902871] groups: 01 02 >>>>>>> [ 24.902874] CPU1 attaching sched-domain: >>>>>>> [ 24.902875] domain 0: span 03 >>>>>>> [ 24.902877] groups: 02 01 >>>>>>> [ 24.903074] net_namespace: 64 bytes >>>>>>> [ 24.903085] Booting paravirtualized kernel on bare hardware >>>>>>> [ 24.903524] Time: 14:55:42 Date: 07/12/08 >>>>>>> [ 24.903549] NET: Registered protocol family 16 >>>>>>> [ 24.903721] EISA bus registered >>>>>>> [ 24.903725] ACPI: bus type pci registered >>>>>>> [ 24.903966] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last >>>>>>> bus=6 >>>>>>> [ 24.903968] PCI: Using configuration type 1 >>>>>>> [ 24.903970] Setting up standard PCI resources >>>>>>> [ 24.912870] ACPI: EC: Look up EC in DSDT >>>>>>> [ 24.915987] ACPI: Interpreter enabled >>>>>>> [ 24.915990] ACPI: (supports S0 S1 S3 S4 S5) >>>>>>> [ 24.916005] ACPI: Using IOAPIC for interrupt routing >>>>>>> [ 24.916251] Error attaching device data >>>>>>> [ 24.916288] Error attaching device data >>>>>>> [ 24.918045] ACPI: EC: non-query interrupt received, switching to >>>>>>> interrupt mode >>>>>>> [ 24.922776] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data >>>>>>> = >>>>>>> 0x62 >>>>>>> [ 24.922779] ACPI: EC: driver started in interrupt mode >>>>>>> [ 24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>>>> [ 24.923832] PCI quirk: region 0800-087f claimed by ICH6 >>>>>>> ACPI/GPIO/TCO >>>>>>> [ 24.923836] PCI quirk: region 0500-053f claimed by ICH6 GPIO >>>>>>> [ 24.925529] PCI: Transparent bridge - 0000:00:1e.0 >>>>>>> [ 24.925622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>>>> [ 24.925751] ACPI: PCI Interrupt Routing Table >>>>>>> [\_SB_.PCI0.P0P2._PRT] >>>>>>> [ 24.925830] ACPI: PCI Interrupt Routing Table >>>>>>> [\_SB_.PCI0.P0P1._PRT] >>>>>>> [ 24.925930] ACPI: PCI Interrupt Routing Table >>>>>>> [\_SB_.PCI0.P0P7._PRT] >>>>>>> [ 24.926006] ACPI: PCI Interrupt Routing Table >>>>>>> [\_SB_.PCI0.P0P8._PRT] >>>>>>> [ 24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) *0, disabled. >>>>>>> [ 24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) *0, disabled. >>>>>>> [ 24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 >>>>>>> 12 >>>>>>> 14 >>>>>>> 15) >>>>>>> [ 24.938649] Linux Plug and Play Support v0.97 (c) Adam Belay >>>>>>> [ 24.938676] pnp: PnP ACPI init >>>>>>> [ 24.938683] ACPI: bus type pnp registered >>>>>>> [ 24.940724] pnp: PnP ACPI: found 13 devices >>>>>>> [ 24.940726] ACPI: ACPI bus type pnp unregistered >>>>>>> [ 24.940730] PnPBIOS: Disabled by ACPI PNP >>>>>>> [ 24.940928] PCI: Using ACPI for IRQ routing >>>>>>> [ 24.940931] PCI: If a device doesn't work, try "pci=routeirq". If >>>>>>> it >>>>>>> helps, post a report >>>>>>> [ 24.994683] NET: Registered protocol family 8 >>>>>>> [ 24.994685] NET: Registered protocol family 20 >>>>>>> [ 24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>>>>>> [ 24.994720] hpet0: 3 64-bit timers, 14318180 Hz >>>>>>> [ 24.995752] AppArmor: AppArmor Filesystem Enabled >>>>>>> [ 24.998674] Time: tsc clocksource has been installed. >>>>>>> [ 24.998681] Switched to high resolution mode on CPU 0 >>>>>>> [ 24.998786] Switched to high resolution mode on CPU 1 >>>>>>> [ 25.014660] system 00:01: iomem range 0xfed14000-0xfed19fff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014670] system 00:08: ioport range 0x400-0x41f has been >>>>>>> reserved >>>>>>> [ 25.014672] system 00:08: ioport range 0x4d0-0x4d1 has been >>>>>>> reserved >>>>>>> [ 25.014674] system 00:08: ioport range 0x800-0x87f has been >>>>>>> reserved >>>>>>> [ 25.014677] system 00:08: ioport range 0x500-0x53f has been >>>>>>> reserved >>>>>>> [ 25.014679] system 00:08: iomem range 0xfed1c000-0xfed1ffff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014682] system 00:08: iomem range 0xfed20000-0xfed3ffff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014684] system 00:08: iomem range 0xfed40000-0xfed8ffff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014690] system 00:0a: iomem range 0xfec00000-0xfec00fff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014693] system 00:0a: iomem range 0xfee00000-0xfee00fff could >>>>>>> not >>>>>>> be >>>>>>> reserved >>>>>>> [ 25.014698] system 00:0b: iomem range 0xe0000000-0xefffffff has >>>>>>> been >>>>>>> reserved >>>>>>> [ 25.014703] system 00:0c: iomem range 0x0-0x9ffff could not be >>>>>>> reserved >>>>>>> [ 25.014706] system 00:0c: iomem range 0xc0000-0xcffff could not be >>>>>>> reserved >>>>>>> [ 25.014708] system 00:0c: iomem range 0xe0000-0xfffff could not be >>>>>>> reserved >>>>>>> [ 25.014711] system 00:0c: iomem range 0x100000-0x7fffffff could >>>>>>> not >>>>>>> be >>>>>>> reserved >>>>>>> [ 25.014713] system 00:0c: iomem range 0xfed90000-0xffffffff could >>>>>>> not >>>>>>> be >>>>>>> reserved >>>>>>> [ 25.045096] PCI: Bridge: 0000:00:01.0 >>>>>>> [ 25.045099] IO window: c000-cfff >>>>>>> [ 25.045102] MEM window: fa000000-fe0fffff >>>>>>> [ 25.045105] PREFETCH window: d0000000-dfffffff >>>>>>> [ 25.045109] PCI: Bridge: 0000:00:1c.0 >>>>>>> [ 25.045110] IO window: disabled. >>>>>>> [ 25.045116] MEM window: disabled. >>>>>>> [ 25.045120] PREFETCH window: disabled. >>>>>>> [ 25.045126] PCI: Bridge: 0000:00:1c.3 >>>>>>> [ 25.045127] IO window: disabled. >>>>>>> [ 25.045133] MEM window: fe100000-fe1fffff >>>>>>> [ 25.045137] PREFETCH window: disabled. >>>>>>> [ 25.045143] PCI: Bridge: 0000:00:1c.4 >>>>>>> [ 25.045145] IO window: d000-dfff >>>>>>> [ 25.045151] MEM window: fe200000-fe2fffff >>>>>>> [ 25.045156] PREFETCH window: disabled. >>>>>>> [ 25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0 >>>>>>> [ 25.045171] IO window: 0000e000-0000e0ff >>>>>>> [ 25.045175] IO window: 0000e400-0000e4ff >>>>>>> [ 25.045180] PREFETCH window: 88000000-8bffffff >>>>>>> [ 25.045185] MEM window: 8c000000-8fffffff >>>>>>> [ 25.045190] PCI: Bridge: 0000:00:1e.0 >>>>>>> [ 25.045193] IO window: e000-efff >>>>>>> [ 25.045199] MEM window: fe300000-febfffff >>>>>>> [ 25.045204] PREFETCH window: f7000000-f8ffffff >>>>>>> [ 25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 25.045225] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>> 64 >>>>>>> [ 25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 25.045255] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>> 64 >>>>>>> [ 25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 17 >>>>>>> [ 25.045285] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>> 64 >>>>>>> [ 25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 25.045315] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>> 64 >>>>>>> [ 25.045329] PCI: Setting latency timer of device 0000:00:1e.0 to >>>>>>> 64 >>>>>>> [ 25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 18 >>>>>>> [ 25.045360] NET: Registered protocol family 2 >>>>>>> [ 25.082645] IP route cache hash table entries: 32768 (order: 5, >>>>>>> 131072 >>>>>>> bytes) >>>>>>> [ 25.082845] TCP established hash table entries: 131072 (order: 8, >>>>>>> 1048576 >>>>>>> bytes) >>>>>>> [ 25.083237] TCP bind hash table entries: 65536 (order: 7, 524288 >>>>>>> bytes) >>>>>>> [ 25.083430] TCP: Hash tables configured (established 131072 bind >>>>>>> 65536) >>>>>>> [ 25.083432] TCP reno registered >>>>>>> [ 25.094708] checking if image is initramfs... it is >>>>>>> [ 25.722077] Freeing initrd memory: 7319k freed >>>>>>> [ 25.722788] audit: initializing netlink socket (disabled) >>>>>>> [ 25.722801] audit(1215874543.369:1): initialized >>>>>>> [ 25.722995] highmem bounce pool size: 64 pages >>>>>>> [ 25.724776] VFS: Disk quotas dquot_6.5.1 >>>>>>> [ 25.724842] Dquot-cache hash table entries: 1024 (order 0, 4096 >>>>>>> bytes) >>>>>>> [ 25.724962] io scheduler noop registered >>>>>>> [ 25.724964] io scheduler anticipatory registered >>>>>>> [ 25.724965] io scheduler deadline registered >>>>>>> [ 25.724978] io scheduler cfq registered (default) >>>>>>> [ 25.725110] Boot video device is 0000:01:00.0 >>>>>>> [ 25.725211] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>> 64 >>>>>>> [ 25.725249] assign_interrupt_mode Found MSI capability >>>>>>> [ 25.725279] Allocate Port Service[0000:00:01.0:pcie00] >>>>>>> [ 25.725312] Allocate Port Service[0000:00:01.0:pcie02] >>>>>>> [ 25.725388] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>> 64 >>>>>>> [ 25.725449] assign_interrupt_mode Found MSI capability >>>>>>> [ 25.725497] Allocate Port Service[0000:00:1c.0:pcie00] >>>>>>> [ 25.725526] Allocate Port Service[0000:00:1c.0:pcie02] >>>>>>> [ 25.725626] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>> 64 >>>>>>> [ 25.725687] assign_interrupt_mode Found MSI capability >>>>>>> [ 25.725734] Allocate Port Service[0000:00:1c.3:pcie00] >>>>>>> [ 25.725764] Allocate Port Service[0000:00:1c.3:pcie02] >>>>>>> [ 25.725864] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>> 64 >>>>>>> [ 25.725924] assign_interrupt_mode Found MSI capability >>>>>>> [ 25.725972] Allocate Port Service[0000:00:1c.4:pcie00] >>>>>>> [ 25.726003] Allocate Port Service[0000:00:1c.4:pcie02] >>>>>>> [ 25.726246] isapnp: Scanning for PnP cards... >>>>>>> [ 26.081376] isapnp: No Plug & Play device found >>>>>>> [ 26.104263] Real Time Clock Driver v1.12ac >>>>>>> [ 26.104422] hpet_resources: 0xfed00000 is busy >>>>>>> [ 26.104462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, >>>>>>> IRQ >>>>>>> sharing enabled >>>>>>> [ 26.105578] RAMDISK driver initialized: 16 RAM disks of 65536K >>>>>>> size >>>>>>> 1024 >>>>>>> blocksize >>>>>>> [ 26.105638] input: Macintosh mouse button emulation as >>>>>>> /devices/virtual/input/input0 >>>>>>> [ 26.105728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>>>>>> 0x60,0x64 >>>>>>> irq 1,12 >>>>>>> [ 26.106070] i8042.c: Detected active multiplexing controller, rev >>>>>>> 1.1. >>>>>>> [ 26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>>>> [ 26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>>>>>> [ 26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>>>>>> [ 26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>>>>>> [ 26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>>>>>> [ 26.134091] mice: PS/2 mouse device common for all mice >>>>>>> [ 26.134193] EISA: Probing bus 0 at eisa.0 >>>>>>> [ 26.134231] EISA: Detected 0 cards. >>>>>>> [ 26.134234] cpuidle: using governor ladder >>>>>>> [ 26.134235] cpuidle: using governor menu >>>>>>> [ 26.134311] NET: Registered protocol family 1 >>>>>>> [ 26.134336] Using IPI No-Shortcut mode >>>>>>> [ 26.134361] registered taskstats version 1 >>>>>>> [ 26.134462] Magic number: 0:283:940 >>>>>>> [ 26.134491] hash matches device ptyyb >>>>>>> [ 26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>>>>>> [ 26.134527] EDD information not available. >>>>>>> [ 26.134709] Freeing unused kernel memory: 368k freed >>>>>>> [ 26.137228] input: AT Translated Set 2 keyboard as >>>>>>> /devices/platform/i8042/serio0/input/input1 >>>>>>> [ 26.228218] vesafb: framebuffer at 0xfb000000, mapped to >>>>>>> 0xf8880000, >>>>>>> using 3750k, total 14336k >>>>>>> [ 26.228221] vesafb: mode is 800x600x32, linelength=3200, pages=1 >>>>>>> [ 26.228223] vesafb: protected mode interface info at c000:b230 >>>>>>> [ 26.228226] vesafb: pmi: set display start = c00cb293, set palette >>>>>>> = >>>>>>> c00cb2ee >>>>>>> [ 26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 >>>>>>> 3c7 >>>>>>> 3c8 >>>>>>> 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da >>>>>>> [ 26.228240] vesafb: scrolling: redraw >>>>>>> [ 26.228242] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >>>>>>> [ 26.228336] Console: switching to colour frame buffer device >>>>>>> 100x37 >>>>>>> [ 26.257461] fb0: VESA VGA frame buffer device >>>>>>> [ 27.394531] fuse init (API version 7.9) >>>>>>> [ 27.413176] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef Cpu0Ist 3000 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef Cpu0Cst 3001 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 27.413641] Monitor-Mwait will be used to enter C-1 state >>>>>>> [ 27.413644] Monitor-Mwait will be used to enter C-2 state >>>>>>> [ 27.413646] Monitor-Mwait will be used to enter C-3 state >>>>>>> [ 27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>> [ 27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef Cpu1Ist 3000 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef Cpu1Cst 3000 >>>>>>> INTL >>>>>>> 20051117) >>>>>>> [ 27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>> [ 27.416854] ACPI: Thermal Zone [THRM] (67 C) >>>>>>> [ 27.722830] usbcore: registered new interface driver usbfs >>>>>>> [ 27.722854] usbcore: registered new interface driver hub >>>>>>> [ 27.722880] usbcore: registered new device driver usb >>>>>>> [ 27.734151] USB Universal Host Controller Interface driver v3.0 >>>>>>> [ 27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 27.734213] PCI: Setting latency timer of device 0000:00:1a.0 to >>>>>>> 64 >>>>>>> [ 27.734217] uhci_hcd 0000:00:1a.0: UHCI Host Controller >>>>>>> [ 27.734416] uhci_hcd 0000:00:1a.0: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 1 >>>>>>> [ 27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 >>>>>>> [ 27.734574] usb usb1: configuration #1 chosen from 1 choice >>>>>>> [ 27.734596] hub 1-0:1.0: USB hub found >>>>>>> [ 27.734600] hub 1-0:1.0: 2 ports detected >>>>>>> [ 27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 19 >>>>>>> [ 27.838155] PCI: Setting latency timer of device 0000:00:1a.1 to >>>>>>> 64 >>>>>>> [ 27.838160] uhci_hcd 0000:00:1a.1: UHCI Host Controller >>>>>>> [ 27.838183] uhci_hcd 0000:00:1a.1: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 2 >>>>>>> [ 27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b880 >>>>>>> [ 27.838318] usb usb2: configuration #1 chosen from 1 choice >>>>>>> [ 27.838340] hub 2-0:1.0: USB hub found >>>>>>> [ 27.838345] hub 2-0:1.0: 2 ports detected >>>>>>> [ 27.845899] SCSI subsystem initialized >>>>>>> [ 27.864429] libata version 3.00 loaded. >>>>>>> [ 27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 20 >>>>>>> [ 27.942119] PCI: Setting latency timer of device 0000:00:1d.0 to >>>>>>> 64 >>>>>>> [ 27.942124] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>>>>>> [ 27.942146] uhci_hcd 0000:00:1d.0: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 3 >>>>>>> [ 27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b800 >>>>>>> [ 27.942286] usb usb3: configuration #1 chosen from 1 choice >>>>>>> [ 27.942308] hub 3-0:1.0: USB hub found >>>>>>> [ 27.942313] hub 3-0:1.0: 2 ports detected >>>>>>> [ 28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 17 >>>>>>> [ 28.046055] PCI: Setting latency timer of device 0000:00:1d.1 to >>>>>>> 64 >>>>>>> [ 28.046059] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>>>>>> [ 28.046082] uhci_hcd 0000:00:1d.1: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 4 >>>>>>> [ 28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b480 >>>>>>> [ 28.046220] usb usb4: configuration #1 chosen from 1 choice >>>>>>> [ 28.046242] hub 4-0:1.0: USB hub found >>>>>>> [ 28.046246] hub 4-0:1.0: 2 ports detected >>>>>>> [ 28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 21 >>>>>>> [ 28.152998] PCI: Setting latency timer of device 0000:00:1d.2 to >>>>>>> 64 >>>>>>> [ 28.153003] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>>>>>> [ 28.153025] uhci_hcd 0000:00:1d.2: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 5 >>>>>>> [ 28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b400 >>>>>>> [ 28.153166] usb usb5: configuration #1 chosen from 1 choice >>>>>>> [ 28.153188] hub 5-0:1.0: USB hub found >>>>>>> [ 28.153192] hub 5-0:1.0: 2 ports detected >>>>>>> [ 28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 21 >>>>>>> [ 28.256978] PCI: Setting latency timer of device 0000:00:1a.7 to >>>>>>> 64 >>>>>>> [ 28.256982] ehci_hcd 0000:00:1a.7: EHCI Host Controller >>>>>>> [ 28.257007] ehci_hcd 0000:00:1a.7: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 6 >>>>>>> [ 28.260906] ehci_hcd 0000:00:1a.7: debug port 1 >>>>>>> [ 28.260913] PCI: cache line size of 32 is not supported by device >>>>>>> 0000:00:1a.7 >>>>>>> [ 28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf9fffc00 >>>>>>> [ 28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, >>>>>>> driver >>>>>>> 10 >>>>>>> Dec 2004 >>>>>>> [ 28.273924] usb usb6: configuration #1 chosen from 1 choice >>>>>>> [ 28.273948] hub 6-0:1.0: USB hub found >>>>>>> [ 28.273953] hub 6-0:1.0: 4 ports detected >>>>>>> [ 28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 20 >>>>>>> [ 28.377923] PCI: Setting latency timer of device 0000:00:1d.7 to >>>>>>> 64 >>>>>>> [ 28.377928] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>>>>>> [ 28.377961] ehci_hcd 0000:00:1d.7: new USB bus registered, >>>>>>> assigned >>>>>>> bus >>>>>>> number 7 >>>>>>> [ 28.381881] ehci_hcd 0000:00:1d.7: debug port 1 >>>>>>> [ 28.381887] PCI: cache line size of 32 is not supported by device >>>>>>> 0000:00:1d.7 >>>>>>> [ 28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800 >>>>>>> [ 28.392765] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>> address >>>>>>> 2 >>>>>>> [ 28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, >>>>>>> driver >>>>>>> 10 >>>>>>> Dec 2004 >>>>>>> [ 28.400897] usb usb7: configuration #1 chosen from 1 choice >>>>>>> [ 28.400919] hub 7-0:1.0: USB hub found >>>>>>> [ 28.400924] hub 7-0:1.0: 6 ports detected >>>>>>> [ 28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 22 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 18 >>>>>>> [ 28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] >>>>>>> MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8] >>>>>>> [ 28.558719] r8169 Gigabit Ethernet driver 2.2LK loaded >>>>>>> [ 28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 28.558818] PCI: Setting latency timer of device 0000:04:00.0 to >>>>>>> 64 >>>>>>> [ 28.559325] eth0: RTL8168b/8111b at 0xf8c44000, 00:19:db:3b:be:ed, >>>>>>> XID >>>>>>> 38000000 IRQ 219 >>>>>>> [ 28.848496] Clocksource tsc unstable (delta = -3284221791 ns) >>>>>>> [ 28.852488] Time: hpet clocksource has been installed. >>>>>>> [ 28.881456] usb 7-5: new high speed USB device using ehci_hcd and >>>>>>> address >>>>>>> 3 >>>>>>> [ 29.020706] usb 7-5: configuration #1 chosen from 1 choice >>>>>>> [ 29.178496] ata_piix 0000:00:1f.2: version 2.12 >>>>>>> [ 29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] >>>>>>> [ 29.186100] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>> address >>>>>>> 3 >>>>>>> [ 29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 21 >>>>>>> [ 29.200001] PCI: Setting latency timer of device 0000:00:1f.2 to >>>>>>> 64 >>>>>>> [ 29.200144] scsi0 : ata_piix >>>>>>> [ 29.200386] scsi1 : ata_piix >>>>>>> [ 29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma >>>>>>> 0xffa0 >>>>>>> irq >>>>>>> 14 >>>>>>> [ 29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma >>>>>>> 0xffa8 >>>>>>> irq >>>>>>> 15 >>>>>>> [ 29.213016] usb 4-2: configuration #1 chosen from 1 choice >>>>>>> [ 29.232150] usbcore: registered new interface driver hiddev >>>>>>> [ 29.237144] input: A4Tech PS/2+USB Mouse as >>>>>>> /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2 >>>>>>> [ 29.244652] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB >>>>>>> Mouse] >>>>>>> on >>>>>>> usb-0000:00:1d.1-2 >>>>>>> [ 29.244671] usbcore: registered new interface driver usbhid >>>>>>> [ 29.244676] >>>>>>> /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: >>>>>>> v2.6:USB HID core driver >>>>>>> [ 29.271950] ieee1394: Host added: ID:BUS[0-00:1023] >>>>>>> GUID[00dc10003a871c01] >>>>>>> [ 29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max >>>>>>> UDMA/133 >>>>>>> [ 29.297941] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth >>>>>>> 0/32) >>>>>>> [ 29.299183] ata1.00: configured for UDMA/133 >>>>>>> [ 29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, EX32, max >>>>>>> UDMA/33 >>>>>>> [ 29.363736] ata2.01: configured for UDMA/33 >>>>>>> [ 29.363918] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 >>>>>>> 04.0 >>>>>>> PQ: 0 ANSI: 5 >>>>>>> [ 29.364680] scsi 1:0:1:0: CD-ROM Optiarc DVD RW >>>>>>> AD-7530A >>>>>>> EX32 >>>>>>> PQ: 0 ANSI: 5 >>>>>>> [ 29.375749] Driver 'sd' needs updating - please use bus_type >>>>>>> methods >>>>>>> [ 29.375816] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors >>>>>>> (160042 >>>>>>> MB) >>>>>>> [ 29.375827] sd 0:0:0:0: [sda] Write Protect is off >>>>>>> [ 29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>> [ 29.375845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>> enabled, >>>>>>> doesn't support DPO or FUA >>>>>>> [ 29.375891] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors >>>>>>> (160042 >>>>>>> MB) >>>>>>> [ 29.375900] sd 0:0:0:0: [sda] Write Protect is off >>>>>>> [ 29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>> [ 29.375918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>> enabled, >>>>>>> doesn't support DPO or FUA >>>>>>> [ 29.375921] sda:<4>Driver 'sr' needs updating - please use >>>>>>> bus_type >>>>>>> methods >>>>>>> [ 29.416876] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > >>>>>>> [ 29.448097] sd 0:0:0:0: [sda] Attached SCSI disk >>>>>>> [ 29.451456] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >>>>>>> xa/form2 >>>>>>> cdda tray >>>>>>> [ 29.451460] Uniform CD-ROM driver Revision: 3.20 >>>>>>> [ 29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0 >>>>>>> [ 29.453330] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>>>>> [ 29.453348] sr 1:0:1:0: Attached scsi generic sg1 type 5 >>>>>>> [ 29.984062] Attempting manual resume >>>>>>> [ 29.984065] swsusp: Resume From Partition 8:5 >>>>>>> [ 29.984067] PM: Checking swsusp image. >>>>>>> [ 29.984307] PM: Resume from disk failed. >>>>>>> [ 30.020273] kjournald starting. Commit interval 5 seconds >>>>>>> [ 30.020310] EXT3-fs: mounted filesystem with ordered data mode. >>>>>>> [ 39.106307] input: PC Speaker as >>>>>>> /devices/platform/pcspkr/input/input3 >>>>>>> [ 39.182164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>>>>> [ 39.214162] shpchp: Standard Hot Plug PCI Controller Driver >>>>>>> version: >>>>>>> 0.4 >>>>>>> [ 39.314029] Linux agpgart interface v0.102 >>>>>>> [ 39.344769] iTCO_vendor_support: vendor-support=0 >>>>>>> [ 39.356145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 >>>>>>> (26-Jul-2007) >>>>>>> [ 39.356213] iTCO_wdt: Found a ICH8M TCO device (Version=2, >>>>>>> TCOBASE=0x0860) >>>>>>> [ 39.356253] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>>>>>> [ 39.376103] input: Power Button (FF) as >>>>>>> /devices/virtual/input/input4 >>>>>>> [ 39.397945] ACPI: Power Button (FF) [PWRF] >>>>>>> [ 39.398024] input: Lid Switch as /devices/virtual/input/input5 >>>>>>> [ 39.398442] ACPI: Lid Switch [LID0] >>>>>>> [ 39.398525] input: Power Button (CM) as >>>>>>> /devices/virtual/input/input6 >>>>>>> [ 39.420942] ACPI: Power Button (CM) [PWRB] >>>>>>> [ 40.062138] Yenta: CardBus bridge found at 0000:05:04.0 >>>>>>> [1462:3fe9] >>>>>>> [ 40.062165] Yenta O2: res at 0x94/0xD4: 00/ea >>>>>>> [ 40.062167] Yenta O2: enabling read prefetch/write burst >>>>>>> [ 40.190436] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 >>>>>>> [ 40.190441] Socket status: 30000006 >>>>>>> [ 40.190443] Yenta: Raising subordinate bus# of parent bus (#05) >>>>>>> from >>>>>>> #06 >>>>>>> to #09 >>>>>>> [ 40.190448] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff >>>>>>> [ 40.190450] cs: IO port probe 0xe000-0xefff: clean. >>>>>>> [ 40.190687] pcmcia: parent PCI bridge Memory window: 0xfe300000 - >>>>>>> 0xfebfffff >>>>>>> [ 40.190689] pcmcia: parent PCI bridge Memory window: 0xf7000000 - >>>>>>> 0xf8ffffff >>>>>>> [ 40.509499] ACPI: Battery Slot [BAT1] (battery absent) >>>>>>> [ 40.525446] sdhci: Secure Digital Host Controller Interface driver >>>>>>> [ 40.525449] sdhci: Copyright(c) Pierre Ossman >>>>>>> [ 40.525490] sdhci: SDHCI controller found at 0000:05:04.2 >>>>>>> [1217:7120] >>>>>>> (rev 2) >>>>>>> [ 40.525517] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 22 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 18 >>>>>>> [ 40.525535] sdhci:slot0: Unknown controller version (2). You may >>>>>>> experience problems. >>>>>>> [ 40.525590] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA >>>>>>> [ 40.530106] ACPI: AC Adapter [ADP1] (on-line) >>>>>>> [ 40.584449] input: Video Bus as >>>>>>> >>>>>>> >>>>>>> >>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 >>>>>>> [ 40.626708] mmc0: new high speed SD card at address b368 >>>>>>> [ 40.626724] Linux video capture interface: v2.00 >>>>>>> [ 40.633956] ACPI: Video Device [NVGA] (multi-head: yes rom: no >>>>>>> post: >>>>>>> no) >>>>>>> [ 40.650802] nvidia: module license 'NVIDIA' taints kernel. >>>>>>> [ 40.905503] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 16 >>>>>>> [ 40.905517] PCI: Setting latency timer of device 0000:01:00.0 to >>>>>>> 64 >>>>>>> [ 40.905638] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 >>>>>>> Thu >>>>>>> Feb >>>>>>> 14 17:53:07 PST 2008 >>>>>>> [ 41.107933] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network >>>>>>> Connection >>>>>>> driver for Linux, 1.2.0 >>>>>>> [ 41.107937] iwl3945: Copyright(c) 2003-2007 Intel Corporation >>>>>>> [ 41.108046] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 17 >>>>>>> [ 41.108067] PCI: Setting latency timer of device 0000:03:00.0 to >>>>>>> 64 >>>>>>> [ 41.108094] iwl3945: Detected Intel PRO/Wireless 3945ABG Network >>>>>>> Connection >>>>>>> [ 41.113192] uvcvideo: Found UVC 1.00 device USB 2.0 Camera >>>>>>> (0c45:62c0) >>>>>>> [ 41.157982] usbcore: registered new interface driver uvcvideo >>>>>>> [ 41.157987] USB Video Class driver (v0.1.0) >>>>>>> [ 41.163654] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, >>>>>>> caps: >>>>>>> 0xa04713/0x10008 >>>>>>> [ 41.205402] input: SynPS/2 Synaptics TouchPad as >>>>>>> /devices/platform/i8042/serio4/input/input8 >>>>>>> [ 41.527140] mmcblk0: mmc0:b368 SMI 124160KiB >>>>>>> [ 41.527171] mmcblk0: unknown partition table >>>>>>> [ 41.548058] iwl3945: Radio Frequency Kill Switch is On: >>>>>>> [ 41.548060] Kill switch must be turned off for wireless networking >>>>>>> to >>>>>>> work. >>>>>>> [ 41.552637] iwl3945: WARNING: Requesting MAC access during RFKILL >>>>>>> wakes >>>>>>> up NIC >>>>>>> [ 41.562730] iwl3945: WARNING: Requesting MAC access during RFKILL >>>>>>> wakes >>>>>>> up NIC >>>>>>> [ 41.582688] iwl3945: WARNING: Requesting MAC access during RFKILL >>>>>>> wakes >>>>>>> up NIC >>>>>>> [ 41.612899] iwl3945: WARNING: Requesting MAC access during RFKILL >>>>>>> wakes >>>>>>> up NIC >>>>>>> [ 41.632896] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a >>>>>>> channels >>>>>>> [ 41.673310] cs: IO port probe 0x100-0x3af: clean. >>>>>>> [ 41.675403] cs: IO port probe 0x3e0-0x4ff: clean. >>>>>>> [ 41.676206] cs: IO port probe 0x820-0x8ff: clean. >>>>>>> [ 41.676648] cs: IO port probe 0xc00-0xcf7: clean. >>>>>>> [ 41.677543] cs: IO port probe 0xa00-0xaff: clean. >>>>>>> [ 41.951205] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, >>>>>>> low) >>>>>>> -> >>>>>>> IRQ 19 >>>>>>> [ 41.951224] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>> 64 >>>>>>> [ 41.959807] hda_codec: Unknown model for ALC883, trying auto-probe >>>>>>> from >>>>>>> BIOS... >>>>>>> [ 42.148966] lp: driver loaded but no devices found >>>>>>> [ 42.292437] Adding 4198396k swap on /dev/sda5. Priority:-1 >>>>>>> extents:1 >>>>>>> across:4198396k >>>>>>> [ 42.718838] EXT3 FS on sda6, internal journal >>>>>>> [ 43.959928] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>>> [ 44.382509] No dock devices found. >>>>>>> [ 46.545179] apm: BIOS not found. >>>>>>> [ 46.658069] ppdev: user-space parallel port driver >>>>>>> [ 46.791061] audit(1215863779.828:2): type=1503 >>>>>>> operation="inode_permission" requested_mask="a::" denied_mask="a::" >>>>>>> name="/dev/tty" pid=5516 profile="/usr/sbin/cupsd" >>>>>>> namespace="default" >>>>>>> [ 48.952388] NET: Registered protocol family 10 >>>>>>> [ 48.952852] lo: Disabled Privacy Extensions >>>>>>> [ 50.404479] Bluetooth: Core ver 2.11 >>>>>>> [ 50.404858] NET: Registered protocol family 31 >>>>>>> [ 50.404864] Bluetooth: HCI device and connection manager >>>>>>> initialized >>>>>>> [ 50.404871] Bluetooth: HCI socket layer initialized >>>>>>> [ 50.471186] Bluetooth: L2CAP ver 2.9 >>>>>>> [ 50.471195] Bluetooth: L2CAP socket layer initialized >>>>>>> [ 50.569202] Bluetooth: RFCOMM socket layer initialized >>>>>>> [ 50.569223] Bluetooth: RFCOMM TTY layer initialized >>>>>>> [ 50.569227] Bluetooth: RFCOMM ver 1.8 >>>>>>> [ 50.775034] r8169: eth0: link up >>>>>>> [ 52.174818] NET: Registered protocol family 17 >>>>>>> [ 65.454676] CPU0 attaching NULL sched-domain. >>>>>>> [ 65.454687] CPU1 attaching NULL sched-domain. >>>>>>> [ 65.459351] CPU0 attaching sched-domain: >>>>>>> [ 65.459362] domain 0: span 03 >>>>>>> [ 65.459367] groups: 01 02 >>>>>>> [ 65.459373] CPU1 attaching sched-domain: >>>>>>> [ 65.459377] domain 0: span 03 >>>>>>> [ 65.459380] groups: 02 01 >>>>>>> [ 73.153942] UDF-fs: No VRS found >>>>>>> [ 73.178375] ISO 9660 Extensions: Microsoft Joliet Level 3 >>>>>>> [ 73.389942] ISOFS: changing to secondary root >>>>>>> [ 76.466197] atkbd.c: Unknown key pressed (translated set 2, code >>>>>>> 0xf6 >>>>>>> on >>>>>>> isa0060/serio0). >>>>>>> [ 76.466209] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>> known. >>>>>>> [ 76.566510] atkbd.c: Unknown key released (translated set 2, code >>>>>>> 0xf6 >>>>>>> on >>>>>>> isa0060/serio0). >>>>>>> [ 76.566519] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>> known. >>>>>>> [ 76.671452] wmaster0: Selected rate control algorithm >>>>>>> 'iwl-3945-rs' >>>>>>> [ 76.874415] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>> [ 81.572469] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>> [ 81.845751] r8169: eth0: link up >>>>>>> [ 92.756596] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>> [ 93.049381] r8169: eth0: link up >>>>>>> [ 97.659156] wlan0: Initial auth_alg=0 >>>>>>> [ 97.659168] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>> [ 97.661681] wlan0: Initial auth_alg=0 >>>>>>> [ 97.661690] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>> [ 97.662510] wlan0: Initial auth_alg=0 >>>>>>> [ 97.662518] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>> [ 97.671569] wlan0: RX authentication from 00:02:6f:45:59:71 (alg=0 >>>>>>> transaction=2 status=0) >>>>>>> [ 97.671581] wlan0: authenticated >>>>>>> [ 97.671586] wlan0: associate with AP 00:02:6f:45:59:71 >>>>>>> [ 97.674286] wlan0: authentication frame received from >>>>>>> 00:02:6f:45:59:71, >>>>>>> but not in authenticate state - ignored >>>>>>> [ 97.675732] wlan0: authentication frame received from >>>>>>> 00:02:6f:45:59:71, >>>>>>> but not in authenticate state - ignored >>>>>>> [ 97.679234] wlan0: RX AssocResp from 00:02:6f:45:59:71 (capab=0x1 >>>>>>> status=0 aid=11) >>>>>>> [ 97.679245] wlan0: associated >>>>>>> [ 97.683747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>>>>>> [ 98.781032] wlan0: no IPv6 routers present >>>>>>> ========== >>>>>>> On Fri, 11 Jul 2008 08:12:41 -0400 >>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>> >>>>>>>> RE: modem is Agere Systems HDA Modem >>>>>>>> Roan from the Details tab of the Driver information, the Device >>>>>>>> information is needed >>>>>>>> 11C1 is the Agere Vendor designation, Likely the Device is either >>>>>>>> 1040 >>>>>>>> or 3026, which need entirely different support. >>>>>>>> >>>>>>>> Also please do >>>>>>>> $ lsmod >> roan.txt >>>>>>>> $ dmesg >> roan.txt >>>>>>>> and send us the roan.txt >>>>>>>> >>>>>>>> Is the Audio functioning? >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> On Fri, Jul 11, 2008 at 2:36 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>> >>>>>>>>> my modem is Agere Systems HDA Modem >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, 10 Jul 2008 17:59:04 -0400 >>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>> >>>>>>>>>> Roan, >>>>>>>>>> >>>>>>>>>> I presume your modem is internal and Not one of >>>>>>>>>> Attached USB devices: >>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>> ID 0c45:62c0 Microdia. >>>>>>>>>> >>>>>>>>>> Read the Softmodem.txt for instructions for doing modem >>>>>>>>>> diagnositcs >>>>>>>>>> under Microsoft. >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> On Thu, Jul 10, 2008 at 1:07 PM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> thx for an answer, Marvin >>>>>>>>>>> i did all as you said, but $ sudo wvdialconf /etc/wvdial.conf now >>>>>>>>>>> says >>>>>>>>>>> this: >>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>> >>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>> >>>>>>>>>>> Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a >>>>>>>>>>> link >>>>>>>>>>> to >>>>>>>>>>> it. >>>>>>>>>>> Modem Port Scan<*1>: SHSF0 S0 S1 S2 S3 SHSF1 SHSF2 SHSF3 >>>>>>>>>>> Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Sorry, no modem was detected! Is it in use by another program? >>>>>>>>>>> Did you configure it properly with setserial? >>>>>>>>>>> >>>>>>>>>>> what alse should i do? >>>>>>>>>>> thx in advance >>>>>>>>>>> >>>>>>>>>>> On Thu, 10 Jul 2008 07:45:02 -0400 >>>>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Roan >>>>>>>>>>>> >>>>>>>>>>>> Your most likely situation is: >>>>>>>>>>>> >>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in their >>>>>>>>>>>> Subsystem, >>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>> does >>>>>>>>>>>> not >>>>>>>>>>>> host a modem. >>>>>>>>>>>> If another modem card has not been detected, then possibilities >>>>>>>>>>>> are: >>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>>>>>> chips >>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>> >>>>>>>>>>>> so try >>>>>>>>>>>> >>>>>>>>>>>> From >>>>>>>>>>>> >>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>> download >>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>> Then install with: >>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>> >>>>>>>>>>>> Please report back after thus testing, >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Jul 10, 2008 at 7:16 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Only plain text email is forwarded by the >>>>>>>>>>>>> Discuss@xxxxxxxxxxxxx >>>>>>>>>>>>> List >>>>>>>>>>>>> Server, >>>>>>>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>>>>>>>> YourName, YourCountry kernel 2.6.24-18-generic >>>>>>>>>>>>> With this Subject Line cogent experts will be alerted, and >>>>>>>>>>>>> useful >>>>>>>>>>>>> case >>>>>>>>>>>>> names left in the Archive. >>>>>>>>>>>>> YourCountry will enable Country specific guidance. Linux >>>>>>>>>>>>> experts >>>>>>>>>>>>> in >>>>>>>>>>>>> YourCountry >>>>>>>>>>>>> can be found through: http://www.linux.org/groups/index.html. >>>>>>>>>>>>> They will know your Country's modem code, which may be >>>>>>>>>>>>> essential >>>>>>>>>>>>> for >>>>>>>>>>>>> dialup >>>>>>>>>>>>> service. >>>>>>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by >>>>>>>>>>>>> an >>>>>>>>>>>>> Internet >>>>>>>>>>>>> Provider mail filters. >>>>>>>>>>>>> So in a day, also check the Archived responses at >>>>>>>>>>>>> http://www.linmodems.org >>>>>>>>>>>>> -------------------------- System information >>>>>>>>>>>>> ---------------------------- >>>>>>>>>>>>> CPU=i686, >>>>>>>>>>>>> Linux version 2.6.24-18-generic (buildd@terranova) (gcc version >>>>>>>>>>>>> 4.2.3 >>>>>>>>>>>>> (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 >>>>>>>>>>>>> scanModem update of: 2008_06_28 >>>>>>>>>>>>> >>>>>>>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>>>>>>>>>> Attached USB devices are: >>>>>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>>>>> ID 0c45:62c0 Microdia >>>>>>>>>>>>> >>>>>>>>>>>>> USB modems not recognized >>>>>>>>>>>>> >>>>>>>>>>>>> For candidate card in slot 00:1b.0, firmware information and >>>>>>>>>>>>> bootup >>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: >>>>>>>>>>>>> Intel >>>>>>>>>>>>> Corporation 82801H >>>>>>>>>>>>> >>>>>>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA >>>>>>>>>>>>> Intel >>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>>>>>> (level, >>>>>>>>>>>>> low) >>>>>>>>>>>>> -> >>>>>>>>>>>>> IRQ 21 >>>>>>>>>>>>> [ 34.842316] PCI: Setting latency timer of device >>>>>>>>>>>>> 0000:00:1b.0 >>>>>>>>>>>>> to >>>>>>>>>>>>> 64 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics >>>>>>>>>>>>> ===== >>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for >>>>>>>>>>>>> some >>>>>>>>>>>>> modems. >>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>> folders. >>>>>>>>>>>>> >>>>>>>>>>>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>>>>>>> The drivers are in the kernel modules tree at: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> /lib/modules/2.6.24-18-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>> >>>>>>>>>>>>> The ALSA verion is 1.0.15 >>>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>>>>>> >>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>>>>>>>>>>> HDA Intel at 0xf9ff8000 irq 21 >>>>>>>>>>>>> === Finished firmware and bootup diagnostics, next deducing >>>>>>>>>>>>> cogent >>>>>>>>>>>>> software. >>>>>>>>>>>>> === >>>>>>>>>>>>> >>>>>>>>>>>>> A candidate modem is not evident among the PCI devices: >>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD >>>>>>>>>>>>> Audio >>>>>>>>>>>>> Controller (rev 03) >>>>>>>>>>>>> 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM >>>>>>>>>>>>> (ICH8M/ICH8M-E) >>>>>>>>>>>>> SATA >>>>>>>>>>>>> IDE Controller (rev 03) >>>>>>>>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce >>>>>>>>>>>>> 8400M >>>>>>>>>>>>> G >>>>>>>>>>>>> (rev >>>>>>>>>>>>> a1) >>>>>>>>>>>>> 03:00.0 Network controller: Intel Corporation PRO/Wireless >>>>>>>>>>>>> 3945ABG >>>>>>>>>>>>> Network >>>>>>>>>>>>> Connection (rev 02) >>>>>>>>>>>>> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>>>>>>>>>>> RTL8111/8168B >>>>>>>>>>>>> PCI Express Gigabit Ethernet controller (rev 01) >>>>>>>>>>>>> 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD >>>>>>>>>>>>> Controller >>>>>>>>>>>>> (rev >>>>>>>>>>>>> 02) >>>>>>>>>>>>> 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated >>>>>>>>>>>>> MS/xD >>>>>>>>>>>>> Controller >>>>>>>>>>>>> (rev 01) >>>>>>>>>>>>> 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE >>>>>>>>>>>>> 1394) >>>>>>>>>>>>> (rev >>>>>>>>>>>>> 02) >>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>> with USB and bridge devices not displayed. >>>>>>>>>>>>> >>>>>>>>>>>>> If your modem is connected by an external serial cable, >>>>>>>>>>>>> or mounted internally on an ISA card, scanModem would not >>>>>>>>>>>>> access >>>>>>>>>>>>> it. >>>>>>>>>>>>> Try with Root permission >>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> to detect these modem types and some USB modems. >>>>>>>>>>>>> If the detection is successful, read the DOCs/wvdial.txt . >>>>>>>>>>>>> Edit the /etc/wvdial.conf with Root permission: >>>>>>>>>>>>> sudo gedit /etc/wvdial.conf >>>>>>>>>>>>> will be able to dial out with Root permission: >>>>>>>>>>>>> sudo wvdial >>>>>>>>>>>>> >>>>>>>>>>>>> Many modems for which scanModem fails have Conexant chips. >>>>>>>>>>>>> From http://www.linuxant.com/drivers/modemident.php >>>>>>>>>>>>> get the ListModem tool, which will report on Conexant chipset >>>>>>>>>>>>> modems >>>>>>>>>>>>> >>>>>>>>>>>>> If the above tests fail, please provide any independent >>>>>>>>>>>>> information >>>>>>>>>>>>> available on your modem. >>>>>>>>>>>>> If an alternative boot into Microsoft windows can be done, do >>>>>>>>>>>>> mouse >>>>>>>>>>>>> clicks on: >>>>>>>>>>>>> Start > Settings > Control Panel > Classical View (for Window >>>>>>>>>>>>> XP) >>>>>>>>>>>>> > >>>>>>>>>>>>> System >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>>>>>> Double >>>>>>>>>>>>>> click >>>>>>>>>>>>>> to >>>>>>>>>>>>> >>>>>>>>>>>>> expand the graphic. Manufacturer information may be displayed. >>>>>>>>>>>>> For >>>>>>>>>>>>> example, >>>>>>>>>>>>> CXT >>>>>>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any >>>>>>>>>>>>> hardware >>>>>>>>>>>>> ID >>>>>>>>>>>>> or >>>>>>>>>>>>> vendor >>>>>>>>>>>>> and device information. From the Driver Details TAB, copy out >>>>>>>>>>>>> the >>>>>>>>>>>>> VENdor >>>>>>>>>>>>> and >>>>>>>>>>>>> DEVice information. >>>>>>>>>>>>> Next do the Query Modem and record the ATI specifications >>>>>>>>>>>>> displayed >>>>>>>>>>>>> such >>>>>>>>>>>>> as: >>>>>>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>>>>>> Try to identify the modem setup file, with name perhaps >>>>>>>>>>>>> MODEM.INF. >>>>>>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>>>>>> >>>>>>>>>>>>> The /proc/asound/ audio+modem diagostics are being copied. >>>>>>>>>>>>> Finished copy to Modem/ALSAroot.tgz >>>>>>>>>>>>> >>>>>>>>>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>>>>>>>>> Modem chipset not detected on >>>>>>>>>>>>> NAME="Audio device: Intel Corporation 82801H " >>>>>>>>>>>>> CLASS=0403 >>>>>>>>>>>>> PCIDEV=8086:284b >>>>>>>>>>>>> SUBSYS=1462:3fe9 >>>>>>>>>>>>> IRQ=21 >>>>>>>>>>>>> HDA=8086:284b >>>>>>>>>>>>> SOFT=8086:284b.HDA >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in >>>>>>>>>>>>> their >>>>>>>>>>>>> Subsystem, >>>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>>> does >>>>>>>>>>>>> not >>>>>>>>>>>>> host >>>>>>>>>>>>> a modem. >>>>>>>>>>>>> If another modem card has not been detected, then >>>>>>>>>>>>> possibilities >>>>>>>>>>>>> are: >>>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>>>>>>> chips >>>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>>> 2) The modem may be of the older non-PCI Controller Chipset >>>>>>>>>>>>> (hardware) type. >>>>>>>>>>>>> Try detection with Root permission: >>>>>>>>>>>>> sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> >>>>>>>>>>>>> For candidate modem in: 00:1b.0 >>>>>>>>>>>>> 0403 Audio device: Intel Corporation 82801H >>>>>>>>>>>>> Primary device ID: 8086:284b >>>>>>>>>>>>> Subsystem PCI_id 1462:3fe9 >>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>>>>>>>> from Archives: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Support type needed or chipset: >>>>>>>>>>>>> >>>>>>>>>>>>> Support can likely be achieved through two mutually exclusive >>>>>>>>>>>>> alternatives: >>>>>>>>>>>>> 1) The hsfmodem software for Conexant chipset modems: Read >>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>> The following ALSA alternative CANNOT work with Conexant >>>>>>>>>>>>> modems. >>>>>>>>>>>>> >>>>>>>>>>>>> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt >>>>>>>>>>>>> for >>>>>>>>>>>>> details, >>>>>>>>>>>>> and >>>>>>>>>>>>> to test get the package SLMODEMD.gcc4.2.tar.gz from: >>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>> >>>>>>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>>>>>> >>>>>>>>>>>>> Writing DOCs/Intel.txt >>>>>>>>>>>>> >>>>>>>>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver >>>>>>>>>>>>> source >>>>>>>>>>>>> package >>>>>>>>>>>>> with full speed enabled is available, but requires driver >>>>>>>>>>>>> compiling. >>>>>>>>>>>>> Read >>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>> >>>>>>>>>>>>> From >>>>>>>>>>>>> >>>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>>> download >>>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>>> Then install with: >>>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>>> >>>>>>>>>>>>> Writing DOCs/Conexant.txt >>>>>>>>>>>>> >>>>>>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>>>>>> ============ end Smartlink section ===================== >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> The base of the UDEV device file system is: /dev/.udev >>>>>>>>>>>>> >>>>>>>>>>>>> Versions adequately match for the compiler installed: 4.2.3 >>>>>>>>>>>>> and the compiler used in kernel assembly: 4.2.3 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Minimal compiling resources appear complete: >>>>>>>>>>>>> make utility - /usr/bin/make >>>>>>>>>>>>> Compiler version 4.2 >>>>>>>>>>>>> linuc_headers base folder /lib/modules/2.6.24-18-generic/build >>>>>>>>>>>>> >>>>>>>>>>>>> However some compilations and executable functions may need >>>>>>>>>>>>> additional >>>>>>>>>>>>> files, >>>>>>>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>>>>>>>>>> installed >>>>>>>>>>>>> in >>>>>>>>>>>>> /usr/include/ . >>>>>>>>>>>>> For martian_modem, additional required packages are libc6-dev >>>>>>>>>>>>> (and >>>>>>>>>>>>> for >>>>>>>>>>>>> Debian/Ubuntu, >>>>>>>>>>>>> linux-libc-dev). The also required headers of package libc6 >>>>>>>>>>>>> are >>>>>>>>>>>>> commonly >>>>>>>>>>>>> installed by default. >>>>>>>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>>>>>>>>>> libc6-dev >>>>>>>>>>>>> packages, for kernels 2.6.24 and later versions. >>>>>>>>>>>>> In not included on your install CD, search for them at >>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>> or comparable Repository for other Linux distros. >>>>>>>>>>>>> When compiling ALSA drivers, the utility "patch" will also be >>>>>>>>>>>>> needed. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> If a driver compilation fails, with message including some lack >>>>>>>>>>>>> of >>>>>>>>>>>>> some >>>>>>>>>>>>> FileName.h (stdio.h for example), then >>>>>>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>>>>>> /usr/include. >>>>>>>>>>>>> The >>>>>>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>>>>>>>>>> >>>>>>>>>>>>> If an alternate ethernet connection is available, >>>>>>>>>>>>> $ apt-get update >>>>>>>>>>>>> $ apt-get -s install linux-kernel-devel >>>>>>>>>>>>> will install needed packages. >>>>>>>>>>>>> For Debian/Ubuntu related distributions, run the following >>>>>>>>>>>>> command >>>>>>>>>>>>> to >>>>>>>>>>>>> display the needed package list: >>>>>>>>>>>>> >>>>>>>>>>>>> Otherwise packages have to be found through >>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>> Once downloaded and transferred into a Linux partition, >>>>>>>>>>>>> they can be installed alltogether with: >>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Checking pppd properties: >>>>>>>>>>>>> -rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 /usr/sbin/pppd >>>>>>>>>>>>> >>>>>>>>>>>>> In case of an "error 17" "serial loopback" problem, see: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>>>>>>>>>> >>>>>>>>>>>>> To enable dialout without Root permission do: >>>>>>>>>>>>> $ su - root (not for Ubuntu) >>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>> >>>>>>>>>>>>> Checking settings of: /etc/ppp/options >>>>>>>>>>>>> asyncmap 0 >>>>>>>>>>>>> noauth >>>>>>>>>>>>> crtscts >>>>>>>>>>>>> lock >>>>>>>>>>>>> hide-password >>>>>>>>>>>>> modem >>>>>>>>>>>>> proxyarp >>>>>>>>>>>>> lcp-echo-interval 30 >>>>>>>>>>>>> lcp-echo-failure 4 >>>>>>>>>>>>> noipx >>>>>>>>>>>>> >>>>>>>>>>>>> In case of a message like: >>>>>>>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission >>>>>>>>>>>>> denied >>>>>>>>>>>>> see >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>>>>>>>>>> >>>>>>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: >>>>>>>>>>>>> eth0 >>>>>>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>>>>>> >>>>>>>>>>>>> Don't worry about the following, it is for experts should >>>>>>>>>>>>> trouble >>>>>>>>>>>>> shooting >>>>>>>>>>>>> be necessary. >>>>>>>>>>>>> ========================================================== >>>>>>>>>>>>> >>>>>>>>>>>>> Checking for modem support lines: >>>>>>>>>>>>> -------------------------------------- >>>>>>>>>>>>> /device/modem symbolic link: >>>>>>>>>>>>> slmodemd created symbolic link /dev/ttySL0: >>>>>>>>>>>>> Within /etc/udev/ files: >>>>>>>>>>>>> >>>>>>>>>>>>> Within /etc/modprobe.conf files: >>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in >>>>>>>>>>>>> order >>>>>>>>>>>>> to >>>>>>>>>>>>> blacklist unwanted modem drivers >>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>>>>>>>>>>>> Within any ancient /etc/devfs files: >>>>>>>>>>>>> >>>>>>>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>>>>>>>>>> >>>>>>>>>>>>> --------- end modem support lines -------- >>>>>>>>>>>>> --- >>>>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>> >>>>>>>>> >>>>>>>>> --- >>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>> >>>>>>> >>>>>>> --- >>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>> >>>>> >>>>> --- >>>>> Professional hosting for everyone - http://www.host.ru >>>>> >>> >>> --- >>> Professional hosting for everyone - http://www.host.ru >>> > > --- > Professional hosting for everyone - http://www.host.ru >
