Re: Roan, Ukraine kernel 2.6.24-18-generic

["roan" <roan@xxxxxxxx>]

yes, audio is working


On Wed, 16 Jul 2008 10:55:58 -0400
 "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> Roan
>
> Is audio working
>
> MarvS
>
> On Wed, Jul 16, 2008 at 10:21 AM, roan <roan@xxxxxxxx> 
> wrote:
> > it seems that blacklisting didn't help
> > $ sudo cat /proc/asound/pcm still says the same:
> > ---------------
> > 00-02: ALC883 Analog : ALC883 Analog : capture 1
> > 00-01: ALC883 Digital : ALC883 Digital : playback 1
> > 00-00: ALC883 Analog : ALC883 Analog : playback 1 : 
> > capture 1
> > ---------------
> >
> > On Mon, 14 Jul 2008 08:06:10 -0400
> >  "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> > > Roan
> > >
> > > $ sudo  cat /proc/asound/pcm
> > > The sudo probably isn't necessary.
> > >
> > > More later. Regulat job now
> > >
> > > MarvS
> > >
> > > On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx> 
> > > wrote:
> > > > first of all i can say that the modem is working with 
> > > > kernel 2.6.21
> > > > but i didn't succeed to make it work under my 2.6.24-19
> > > > downloaded agrsm-20080626.tar.gz
> > > > tried to make install, but it says that some needed 
> > > > files are missing.
> > > > don't
> > > > know which ones :(
> > > >
> > > > on another hand i blacklisted this list of modules you 
> > > > sent me in file
> > > > /etc/modeprobe.d/blacklist
> > > > ------
> > > > scsi_mod
> > > > ehci_hcd
> > > > uhci_hcd
> > > > usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd
> > > >
> > > > shpchp 34452 0
> > > >
> > > > pci_hotplug 30880 1 shpchp
> > > >
> > > > pcspkr 4224 0
> > > >
> > > > sr_mod 17956 1
> > > >
> > > > cdrom 37408 1 sr_mod
> > > >
> > > > sd_mod 30720 4
> > > >
> > > > pcmcia_core
> > > >
> > > > uvcvideo 58116 0
> > > >
> > > > iwl3945 89844 0
> > > >
> > > > compat_ioctl32 2304 1 uvcvideo
> > > >
> > > > iwlwifi_mac80211 219108 1 iwl3945
> > > >
> > > > videodev 29440 1 uvcvideo
> > > >
> > > > v4l1_compat 15492 2 uvcvideo,videodev
> > > >
> > > > v4l2_common 18304 2 uvcvideo,videodev
> > > >
> > > > video 19856 8
> > > >
> > > > rfcomm 41744 2
> > > >
> > > > l2cap 25728 13 rfcomm
> > > >
> > > > bluetooth 61156 4 rfcomm,l2cap
> > > >
> > > > snd_atiixp_modem 17672 0
> > > >
> > > > snd_via82xx_modem 16392 0
> > > >
> > > > snd_intel8x0m
> > > > ------
> > > > but nothing changed: the $ /proc/asound/pcm still says 
> > > > "permission
> > > > denied"
> > > > or when i do it with sudo it says " no such file..."
> > > >
> > > > so please tell me what i need to do to make modem 
> > > > working on 2.6.24-19
> > > > kernel?
> > > > thx in advance
> > > >
> > > >
> > > > On Sat, 12 Jul 2008 09:41:01 -0400
> > > >  "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > Bjorn,
> > > > >
> > > > > Would you please work with Roan, to get his
> > > > > CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc 
> > > > > version 4.2
> > > > > with
> > > > > PCI slot       PCI ID          SubsystemID     Name
> > > > > ----------     ---------       --------- 
> > > > >  --------------
> > > > > 00:1b.0        8086:284b       1462:3fe9       Audio 
> > > > > device: Intel
> > > > > Corporation 82801H
> > > > > having the 11c11040 Agere chip on Subsystem  1462:3fe9
> > > > >
> > > > > Modem interrupt assignment and sharing:
> > > > > 21:        407        392   IO-APIC-fasteoi 
> > > > > uhci_hcd:usb4, HDA Intel
> > > > > --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> > > > > [   34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> 
> > > > > GSI 21 (level,
> > > > > low) -> IRQ 21
> > > > > [   34.842316] PCI: Setting latency timer of device 
> > > > > 0000:00:1b.0 to 64
> > > > >
> > > > > The ALSA verion is 1.0.15
> > > > >
> > > > > The /proc/asound/pcm file reports:
> > > > > -----------------------
> > > > > 00-02: ALC883 Analog : ALC883 Analog : capture 1
> > > > > 00-01: ALC883 Digital : ALC883 Digital : playback 1
> > > > > 00-00: ALC883 Analog : ALC883 Analog : playback 1 : 
> > > > > capture 1
> > > > > ---------------
> > > > > but there is no expected Modem line, like
> > > > > 00-06: Something Modem
> > > > > so there is probably a resource conflict to be dealt 
> > > > > with and/or an
> > > > > ALSA version upgradeto 1.0.16  may be necessary.
> > > > >
> > > > > Roan
> > > > > Detach any external devices which are not Essential (USB 
> > > > > and PCMCIA
> > > > > etc.).
> > > > > or you can disable the usage through an edit in:
> > > > > $ sudo gedit  /etc/discover.conf
> > > > > Of course you must retain  ide and pci services
> > > > >
> > > > > You can also less globally blacklist non-essential 
> > > > > modules, to free up
> > > > > resources.
> > > > > See 
> > > > > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html
> > > > > on blacklisting guidance.
> > > > > Modules non essential on your System for dialup include:
> > > > > scsi_mod            needed for USB drivers
> > > > > ehci_hcd            USB2
> > > > > uhci_hcd           other USB
> > > > > usbcore               146028  5 
> > > > > uvcvideo,usbhid,ehci_hcd,uhci_hcd
> > > > > shpchp                 34452  0
> > > > > pci_hotplug            30880  1 shpchp
> > > > > pcspkr                  4224  0
> > > > > sr_mod                 17956  1
> > > > > cdrom                  37408  1 sr_mod
> > > > > sd_mod                 30720  4
> > > > > pcmcia_core
> > > > > uvcvideo               58116  0
> > > > > iwl3945                89844  0
> > > > > compat_ioctl32          2304  1 uvcvideo
> > > > > iwlwifi_mac80211      219108  1 iwl3945
> > > > > videodev               29440  1 uvcvideo
> > > > > v4l1_compat            15492  2 uvcvideo,videodev
> > > > > v4l2_common            18304  2 uvcvideo,videodev
> > > > > video                  19856  8
> > > > > rfcomm                 41744  2
> > > > > l2cap                  25728  13 rfcomm
> > > > > bluetooth              61156  4 rfcomm,l2cap
> > > > > snd_atiixp_modem       17672  0
> > > > > snd_via82xx_modem      16392  0
> > > > > snd_intel8x0m          modem driver also, not for your 
> > > > > HDA system
> > > > >
> > > > > Then after a reboot, do
> > > > > $  /proc/asound/pcm
> > > > > to assess if a modem line is present.
> > > > >
> > > > > Another fast thing you can try is from
> > > > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ 
> > > > > get the
> > > > > agrsm_howto.txt and the 
> > > > > linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb
> > > > > which already includes agrmodem + agrserial drivers. 
> > > > > Install  with:
> > > > > $ sudo dpkg -i  linux-image*.deb
> > > > > Then reboot under the new 2.6.21.0-22 kernel and run 
> > > > > through the tests
> > > > > described in agrsm_howto.txt, except compiling & driver 
> > > > > installation
> > > > > is already done.
> > > > > While lacking this modem hardware,
> > > > > linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not 
> > > > > cause any
> > > > > problems on my otherwise Ubuntu system.  It is Debian 
> > > > > repackaging of
> > > > > the Fedora like  kernel-2.6.21.0-22.i686.rpm , which I 
> > > > > did.
> > > > >
> > > > > Joern will direct you with respect to further getting 
> > > > > service under
> > > > > 2.6.24 kernels.
> > > > > The current Mandiva Linux release with 2.4.26 kernels 
> > > > > does have a
> > > > > package
> > > > > dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm   supporting the 
> > > > > 11c11040 chip
> > > > > modem.
> > > > >
> > > > > MarvS
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx> 
> > > > > wrote:
> > > > > > from the driver information i found out that the device 
> > > > > > is 1040
> > > > > > there is ven=11c1 and dev=1040
> > > > > > here is the info from lsmod and dmesg
> > > > > > ==========
> > > > > > Module                  Size  Used by
> > > > > > arc4                    2944  2
> > > > > > ecb                     4480  2
> > > > > > blkcipher               8324  1 ecb
> > > > > > nls_iso8859_1           4992  1
> > > > > > nls_cp437               6656  1
> > > > > > isofs                  36388  1
> > > > > > vfat                   14464  1
> > > > > > fat                    54556  1 vfat
> > > > > > udf                    88612  0
> > > > > > af_packet              23812  6
> > > > > > rfcomm                 41744  2
> > > > > > l2cap                  25728  13 rfcomm
> > > > > > bluetooth              61156  4 rfcomm,l2cap
> > > > > > ipv6                  267780  14
> > > > > > ppdev                  10372  0
> > > > > > snd_atiixp_modem       17672  0
> > > > > > snd_via82xx_modem      16392  0
> > > > > > snd_intel8x0m          19084  0
> > > > > > snd_ac97_codec        101156  3
> > > > > > snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m
> > > > > > ac97_bus                3072  1 snd_ac97_codec
> > > > > > acpi_cpufreq           10796  1
> > > > > > cpufreq_stats           7104  0
> > > > > > cpufreq_conservative     8712  0
> > > > > > cpufreq_ondemand        9740  1
> > > > > > freq_table              5536  3
> > > > > > acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
> > > > > > cpufreq_userspace       5284  0
> > > > > > cpufreq_powersave       2688  0
> > > > > > sbs                    15112  0
> > > > > > sbshc                   7680  1 sbs
> > > > > > container               5632  0
> > > > > > dock                   11280  0
> > > > > > iptable_filter          3840  0
> > > > > > ip_tables              14820  1 iptable_filter
> > > > > > x_tables               16132  1 ip_tables
> > > > > > coretemp                8448  0
> > > > > > sbp2                   24072  0
> > > > > > parport_pc             36260  0
> > > > > > lp                     12324  0
> > > > > > parport                37832  3 ppdev,parport_pc,lp
> > > > > > snd_hda_intel         351908  3
> > > > > > snd_pcm_oss            42528  0
> > > > > > snd_mixer_oss          18048  1 snd_pcm_oss
> > > > > > snd_pcm                78852  6
> > > > > >
> > > > > >
> > > > > > snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss
> > > > > > snd_page_alloc         11656  5
> > > > > > snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
> > > > > > snd_hwdep              10628  1 snd_hda_intel
> > > > > > joydev                 13120  0
> > > > > > mmc_block              14980  1
> > > > > > snd_seq_dummy           4996  0
> > > > > > pcmcia                 40876  0
> > > > > > snd_seq_oss            35456  0
> > > > > > snd_seq_midi            9504  0
> > > > > > snd_rawmidi            25888  1 snd_seq_midi
> > > > > > uvcvideo               58116  0
> > > > > > iwl3945                89844  0
> > > > > > snd_seq_midi_event      8576  2 snd_seq_oss,snd_seq_midi
> > > > > > compat_ioctl32          2304  1 uvcvideo
> > > > > > iwlwifi_mac80211      219108  1 iwl3945
> > > > > > snd_seq                54096  6
> > > > > > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> > > > > > nvidia               7825536  36
> > > > > > videodev               29440  1 uvcvideo
> > > > > > v4l1_compat            15492  2 uvcvideo,videodev
> > > > > > v4l2_common            18304  2 uvcvideo,videodev
> > > > > > video                  19856  8
> > > > > > psmouse                40336  0
> > > > > > ac                      6916  0
> > > > > > sdhci                  19076  0
> > > > > > battery                14212  0
> > > > > > snd_timer              24964  2 snd_pcm,snd_seq
> > > > > > cfg80211               15112  1 iwlwifi_mac80211
> > > > > > i2c_core               24832  1 nvidia
> > > > > > output                  4736  1 video
> > > > > > serio_raw               7940  0
> > > > > > mmc_core               51460  2 mmc_block,sdhci
> > > > > > snd_seq_device          9740  5
> > > > > > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> > > > > > yenta_socket           27276  1
> > > > > > rsrc_nonstatic         13696  1 yenta_socket
> > > > > > pcmcia_core            40596  3 
> > > > > > pcmcia,yenta_socket,rsrc_nonstatic
> > > > > > snd                    56996  21
> > > > > >
> > > > > >
> > > > > > snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> > > > > > evdev                  13056  6
> > > > > > button                  9232  0
> > > > > > iTCO_wdt               13092  0
> > > > > > iTCO_vendor_support     4868  1 iTCO_wdt
> > > > > > intel_agp              25492  0
> > > > > > agpgart                34760  2 nvidia,intel_agp
> > > > > > soundcore               8800  1 snd
> > > > > > shpchp                 34452  0
> > > > > > pci_hotplug            30880  1 shpchp
> > > > > > pcspkr                  4224  0
> > > > > > ext3                  136712  1
> > > > > > jbd                    48404  1 ext3
> > > > > > mbcache                 9600  1 ext3
> > > > > > sg                     36880  0
> > > > > > sr_mod                 17956  1
> > > > > > cdrom                  37408  1 sr_mod
> > > > > > sd_mod                 30720  4
> > > > > > ata_generic             8324  0
> > > > > > pata_acpi               8320  0
> > > > > > usbhid                 31872  0
> > > > > > hid                    38784  1 usbhid
> > > > > > ohci1394               33584  0
> > > > > > ata_piix               19588  4
> > > > > > ieee1394               93752  2 sbp2,ohci1394
> > > > > > r8169                  32900  0
> > > > > > libata                159344  3 
> > > > > > ata_generic,pata_acpi,ata_piix
> > > > > > scsi_mod              151436  5 
> > > > > > sbp2,sg,sr_mod,sd_mod,libata
> > > > > > ehci_hcd               37900  0
> > > > > > uhci_hcd               27024  0
> > > > > > usbcore               146028  5 
> > > > > > uvcvideo,usbhid,ehci_hcd,uhci_hcd
> > > > > > thermal                16796  0
> > > > > > processor              36872  4 acpi_cpufreq,thermal
> > > > > > fan                     5636  0
> > > > > > fuse                   50580  5
> > > > > > vesafb                  8964  1
> > > > > > fbcon                  42912  72
> > > > > > tileblit                3456  1 fbcon
> > > > > > font                    9472  1 fbcon
> > > > > > bitblit                 6784  1 fbcon
> > > > > > softcursor              3072  1 bitblit
> > > > > > [    0.000000] Initializing cgroup subsys cpuset
> > > > > > [    0.000000] Initializing cgroup subsys cpu
> > > > > > [    0.000000] Linux version 2.6.24-18-generic 
> > > > > > (buildd@terranova) (gcc
> > > > > > version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 
> > > > > > 20:27:26 UTC
> > > > > > 2008
> > > > > > (Ubuntu 2.6.24-18.32-generic)
> > > > > > [    0.000000] BIOS-provided physical RAM map:
> > > > > > [    0.000000]  BIOS-e820: 0000000000000000 - 
> > > > > > 000000000009fc00 (usable)
> > > > > > [    0.000000]  BIOS-e820: 000000000009fc00 - 
> > > > > > 00000000000a0000
> > > > > > (reserved)
> > > > > > [    0.000000]  BIOS-e820: 00000000000e0000 - 
> > > > > > 0000000000100000
> > > > > > (reserved)
> > > > > > [    0.000000]  BIOS-e820: 0000000000100000 - 
> > > > > > 000000007ffb0000 (usable)
> > > > > > [    0.000000]  BIOS-e820: 000000007ffb0000 - 
> > > > > > 000000007ffbe000 (ACPI
> > > > > > data)
> > > > > > [    0.000000]  BIOS-e820: 000000007ffbe000 - 
> > > > > > 000000007fff0000 (ACPI
> > > > > > NVS)
> > > > > > [    0.000000]  BIOS-e820: 000000007fff0000 - 
> > > > > > 0000000080000000
> > > > > > (reserved)
> > > > > > [    0.000000]  BIOS-e820: 00000000fee00000 - 
> > > > > > 00000000fee01000
> > > > > > (reserved)
> > > > > > [    0.000000]  BIOS-e820: 00000000fff80000 - 
> > > > > > 0000000100000000
> > > > > > (reserved)
> > > > > > [    0.000000] 1151MB HIGHMEM available.
> > > > > > [    0.000000] 896MB LOWMEM available.
> > > > > > [    0.000000] found SMP MP-table at 000ff780
> > > > > > [    0.000000] Entering add_active_range(0, 0, 524208) 0 
> > > > > > entries of 256
> > > > > > used
> > > > > > [    0.000000] Zone PFN ranges:
> > > > > > [    0.000000]   DMA             0 ->     4096
> > > > > > [    0.000000]   Normal       4096 ->   229376
> > > > > > [    0.000000]   HighMem    229376 ->   524208
> > > > > > [    0.000000] Movable zone start PFN for each node
> > > > > > [    0.000000] early_node_map[1] active PFN ranges
> > > > > > [    0.000000]     0:        0 ->   524208
> > > > > > [    0.000000] On node 0 totalpages: 524208
> > > > > > [    0.000000]   DMA zone: 32 pages used for memmap
> > > > > > [    0.000000]   DMA zone: 0 pages reserved
> > > > > > [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
> > > > > > [    0.000000]   Normal zone: 1760 pages used for memmap
> > > > > > [    0.000000]   Normal zone: 223520 pages, LIFO 
> > > > > > batch:31
> > > > > > [    0.000000]   HighMem zone: 2303 pages used for 
> > > > > > memmap
> > > > > > [    0.000000]   HighMem zone: 292529 pages, LIFO 
> > > > > > batch:31
> > > > > > [    0.000000]   Movable zone: 0 pages used for memmap
> > > > > > [    0.000000] DMI present.
> > > > > > [    0.000000] ACPI: RSDP signature @ 0xC00F84A0 
> > > > > > checksum 0
> > > > > > [    0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM)
> > > > > > [    0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB 
> > > > > > MEGABOOK 20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707 
> > > > > > FACP1702 20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1  M1636 
> > > > > > M1636000        0
> > > > > > INTL
> > > > > > 20051117)
> > > > > > [    0.000000] ACPI: FACS 7FFBE000, 0040
> > > > > > [    0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707 
> > > > > > APIC1702 20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707 
> > > > > > OEMMCFG  20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB 
> > > > > > MEGABOOK 20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707 
> > > > > > OEMB1702 20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707 
> > > > > > OEMHPET  20070517
> > > > > > MSFT
> > > > > >   97)
> > > > > > [    0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1  PmRef 
> > > > > > CpuPm     3000 INTL
> > > > > > 20051117)
> > > > > > [    0.000000] ACPI: PM-Timer IO Port: 0x808
> > > > > > [    0.000000] ACPI: Local APIC address 0xfee00000
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] 
> > > > > > enabled)
> > > > > > [    0.000000] Processor #0 6:15 APIC version 20
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] 
> > > > > > enabled)
> > > > > > [    0.000000] Processor #1 6:15 APIC version 20
> > > > > > [    0.000000] ACPI: IOAPIC (id[0x02] 
> > > > > > address[0xfec00000] gsi_base[0])
> > > > > > [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 
> > > > > > 0xfec00000,
> > > > > > GSI
> > > > > > 0-23
> > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 
> > > > > > global_irq 2 dfl dfl)
> > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 
> > > > > > global_irq 9 high
> > > > > > level)
> > > > > > [    0.000000] ACPI: IRQ0 used by override.
> > > > > > [    0.000000] ACPI: IRQ2 used by override.
> > > > > > [    0.000000] ACPI: IRQ9 used by override.
> > > > > > [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O 
> > > > > > APICs
> > > > > > [    0.000000] ACPI: HPET id: 0xffffffff base: 
> > > > > > 0xfed00000
> > > > > > [    0.000000] Using ACPI (MADT) for SMP configuration 
> > > > > > information
> > > > > > [    0.000000] Allocating PCI resources starting at 
> > > > > > 88000000 (gap:
> > > > > > 80000000:7ee00000)
> > > > > > [    0.000000] swsusp: Registered nosave memory region:
> > > > > > 000000000009f000
> > > > > > -
> > > > > > 00000000000a0000
> > > > > > [    0.000000] swsusp: Registered nosave memory region:
> > > > > > 00000000000a0000
> > > > > > -
> > > > > > 00000000000e0000
> > > > > > [    0.000000] swsusp: Registered nosave memory region:
> > > > > > 00000000000e0000
> > > > > > -
> > > > > > 0000000000100000
> > > > > > [    0.000000] Built 1 zonelists in Zone order, mobility 
> > > > > > grouping on.
> > > > > >  Total
> > > > > > pages: 520113
> > > > > > [    0.000000] Kernel command line:
> > > > > > root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash 
> > > > > > vga=789 quiet
> > > > > > [    0.000000] mapped APIC to ffffb000 (fee00000)
> > > > > > [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
> > > > > > [    0.000000] Enabling fast FPU save and restore... 
> > > > > > done.
> > > > > > [    0.000000] Enabling unmasked SIMD FPU exception 
> > > > > > support... done.
> > > > > > [    0.000000] Initializing CPU#0
> > > > > > [    0.000000] PID hash table entries: 4096 (order: 12, 
> > > > > > 16384 bytes)
> > > > > > [    0.000000] Detected 1795.565 MHz processor.
> > > > > > [   24.138347] Console: colour dummy device 80x25
> > > > > > [   24.138350] console [tty0] enabled
> > > > > > [   24.138603] Dentry cache hash table entries: 131072 
> > > > > > (order: 7,
> > > > > > 524288
> > > > > > bytes)
> > > > > > [   24.138876] Inode-cache hash table entries: 65536 
> > > > > > (order: 6, 262144
> > > > > > bytes)
> > > > > > [   24.226903] Memory: 2066816k/2096832k available 
> > > > > > (2176k kernel code,
> > > > > > 28700k reserved, 1006k data, 368k init, 1179328k 
> > > > > > highmem)
> > > > > > [   24.226909] virtual kernel memory layout:
> > > > > > [   24.226910]     fixmap  : 0xfff4b000 - 0xfffff000   ( 
> > > > > > 720 kB)
> > > > > > [   24.226911]     pkmap   : 0xff800000 - 0xffc00000 
> > > > > > (4096 kB)
> > > > > > [   24.226912]     vmalloc : 0xf8800000 - 0xff7fe000   ( 
> > > > > > 111 MB)
> > > > > > [   24.226913]     lowmem  : 0xc0000000 - 0xf8000000   ( 
> > > > > > 896 MB)
> > > > > > [   24.226914]       .init : 0xc0421000 - 0xc047d000   ( 
> > > > > > 368 kB)
> > > > > > [   24.226915]       .data : 0xc03201f4 - 0xc041bdc4 
> > > > > > (1006 kB)
> > > > > > [   24.226916]       .text : 0xc0100000 - 0xc03201f4 
> > > > > > (2176 kB)
> > > > > > [   24.226919] Checking if this processor honours the WP 
> > > > > > bit even in
> > > > > > supervisor mode... Ok.
> > > > > > [   24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1, 
> > > > > > MinObjects=4,
> > > > > > CPUs=2, Nodes=1
> > > > > > [   24.227097] hpet clockevent registered
> > > > > > [   24.307060] Calibrating delay using timer specific 
> > > > > > routine.. 3595.17
> > > > > > BogoMIPS (lpj=7190350)
> > > > > > [   24.307082] Security Framework initialized
> > > > > > [   24.307088] SELinux:  Disabled at boot.
> > > > > > [   24.307100] AppArmor: AppArmor initialized
> > > > > > [   24.307103] Failure registering capabilities with 
> > > > > > primary security
> > > > > > module.
> > > > > > [   24.307111] Mount-cache hash table entries: 512
> > > > > > [   24.307223] Initializing cgroup subsys ns
> > > > > > [   24.307228] Initializing cgroup subsys cpuacct
> > > > > > [   24.307237] CPU: After generic identify, caps: 
> > > > > > bfebfbff 20100000
> > > > > > 00000000
> > > > > > 00000000 0000e3bd 00000000 00000001 00000000
> > > > > > [   24.307244] monitor/mwait feature present.
> > > > > > [   24.307246] using mwait in idle threads.
> > > > > > [   24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > [   24.307252] CPU: L2 cache: 2048K
> > > > > > [   24.307254] CPU: Physical Processor ID: 0
> > > > > > [   24.307255] CPU: Processor Core ID: 0
> > > > > > [   24.307257] CPU: After all inits, caps: bfebfbff 
> > > > > > 20100000 00000000
> > > > > > 00003940 0000e3bd 00000000 00000001 00000000
> > > > > > [   24.307266] Compat vDSO mapped to ffffe000.
> > > > > > [   24.307278] Checking 'hlt' instruction... OK.
> > > > > > [   24.323404] SMP alternatives: switching to UP code
> > > > > > [   24.324901] Early unpacking initramfs... done
> > > > > > [   24.643306] ACPI: Core revision 20070126
> > > > > > [   24.643345] ACPI: Looking for DSDT in initramfs... 
> > > > > > error, file
> > > > > > /DSDT.aml
> > > > > > not found.
> > > > > > [   24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU   T7100 
> > > > > > @ 1.80GHz
> > > > > > stepping
> > > > > > 0d
> > > > > > [   24.645818] SMP alternatives: switching to SMP code
> > > > > > [   24.646454] Booting processor 1/1 eip 3000
> > > > > > [   24.656641] Initializing CPU#1
> > > > > > [   24.734815] Calibrating delay using timer specific 
> > > > > > routine.. 3590.98
> > > > > > BogoMIPS (lpj=7181974)
> > > > > > [   24.734821] CPU: After generic identify, caps: 
> > > > > > bfebfbff 20100000
> > > > > > 00000000
> > > > > > 00000000 0000e3bd 00000000 00000001 00000000
> > > > > > [   24.734826] monitor/mwait feature present.
> > > > > > [   24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > [   24.734830] CPU: L2 cache: 2048K
> > > > > > [   24.734832] CPU: Physical Processor ID: 0
> > > > > > [   24.734833] CPU: Processor Core ID: 1
> > > > > > [   24.734835] CPU: After all inits, caps: bfebfbff 
> > > > > > 20100000 00000000
> > > > > > 00003940 0000e3bd 00000000 00000001 00000000
> > > > > > [   24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU   T7100 
> > > > > > @ 1.80GHz
> > > > > > stepping
> > > > > > 0d
> > > > > > [   24.735413] Total of 2 processors activated (7186.16 
> > > > > > BogoMIPS).
> > > > > > [   24.735588] ENABLING IO-APIC IRQs
> > > > > > [   24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2 
> > > > > > apic2=-1 pin2=-1
> > > > > > [   24.882841] checking TSC synchronization [CPU#0 -> 
> > > > > > CPU#1]: passed.
> > > > > > [   24.902845] Brought up 2 CPUs
> > > > > > [   24.902867] CPU0 attaching sched-domain:
> > > > > > [   24.902869]  domain 0: span 03
> > > > > > [   24.902871]   groups: 01 02
> > > > > > [   24.902874] CPU1 attaching sched-domain:
> > > > > > [   24.902875]  domain 0: span 03
> > > > > > [   24.902877]   groups: 02 01
> > > > > > [   24.903074] net_namespace: 64 bytes
> > > > > > [   24.903085] Booting paravirtualized kernel on bare 
> > > > > > hardware
> > > > > > [   24.903524] Time: 14:55:42  Date: 07/12/08
> > > > > > [   24.903549] NET: Registered protocol family 16
> > > > > > [   24.903721] EISA bus registered
> > > > > > [   24.903725] ACPI: bus type pci registered
> > > > > > [   24.903966] PCI: PCI BIOS revision 3.00 entry at 
> > > > > > 0xf0031, last bus=6
> > > > > > [   24.903968] PCI: Using configuration type 1
> > > > > > [   24.903970] Setting up standard PCI resources
> > > > > > [   24.912870] ACPI: EC: Look up EC in DSDT
> > > > > > [   24.915987] ACPI: Interpreter enabled
> > > > > > [   24.915990] ACPI: (supports S0 S1 S3 S4 S5)
> > > > > > [   24.916005] ACPI: Using IOAPIC for interrupt routing
> > > > > > [   24.916251] Error attaching device data
> > > > > > [   24.916288] Error attaching device data
> > > > > > [   24.918045] ACPI: EC: non-query interrupt received, 
> > > > > > switching to
> > > > > > interrupt mode
> > > > > > [   24.922776] ACPI: EC: GPE = 0x17, I/O: command/status 
> > > > > > = 0x66, data =
> > > > > > 0x62
> > > > > > [   24.922779] ACPI: EC: driver started in interrupt 
> > > > > > mode
> > > > > > [   24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > > > > > [   24.923832] PCI quirk: region 0800-087f claimed by 
> > > > > > ICH6
> > > > > > ACPI/GPIO/TCO
> > > > > > [   24.923836] PCI quirk: region 0500-053f claimed by 
> > > > > > ICH6 GPIO
> > > > > > [   24.925529] PCI: Transparent bridge - 0000:00:1e.0
> > > > > > [   24.925622] ACPI: PCI Interrupt Routing Table 
> > > > > > [\_SB_.PCI0._PRT]
> > > > > > [   24.925751] ACPI: PCI Interrupt Routing Table 
> > > > > > [\_SB_.PCI0.P0P2._PRT]
> > > > > > [   24.925830] ACPI: PCI Interrupt Routing Table 
> > > > > > [\_SB_.PCI0.P0P1._PRT]
> > > > > > [   24.925930] ACPI: PCI Interrupt Routing Table 
> > > > > > [\_SB_.PCI0.P0P7._PRT]
> > > > > > [   24.926006] ACPI: PCI Interrupt Routing Table 
> > > > > > [\_SB_.PCI0.P0P8._PRT]
> > > > > > [   24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 
> > > > > > 5 6 7 *10 11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 
> > > > > > 5 6 7 10 11 12
> > > > > > 14
> > > > > > 15) *0, disabled.
> > > > > > [   24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 
> > > > > > 4 5 6 7 10 11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 
> > > > > > 5 6 7 10 *11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 
> > > > > > 5 6 7 10 11 12
> > > > > > 14
> > > > > > 15) *0, disabled.
> > > > > > [   24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 
> > > > > > *5 6 7 10 11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 
> > > > > > *4 5 6 7 10 11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 
> > > > > > 5 6 *7 10 11
> > > > > > 12
> > > > > > 14
> > > > > > 15)
> > > > > > [   24.938649] Linux Plug and Play Support v0.97 (c) 
> > > > > > Adam Belay
> > > > > > [   24.938676] pnp: PnP ACPI init
> > > > > > [   24.938683] ACPI: bus type pnp registered
> > > > > > [   24.940724] pnp: PnP ACPI: found 13 devices
> > > > > > [   24.940726] ACPI: ACPI bus type pnp unregistered
> > > > > > [   24.940730] PnPBIOS: Disabled by ACPI PNP
> > > > > > [   24.940928] PCI: Using ACPI for IRQ routing
> > > > > > [   24.940931] PCI: If a device doesn't work, try 
> > > > > > "pci=routeirq".  If
> > > > > > it
> > > > > > helps, post a report
> > > > > > [   24.994683] NET: Registered protocol family 8
> > > > > > [   24.994685] NET: Registered protocol family 20
> > > > > > [   24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> > > > > > [   24.994720] hpet0: 3 64-bit timers, 14318180 Hz
> > > > > > [   24.995752] AppArmor: AppArmor Filesystem Enabled
> > > > > > [   24.998674] Time: tsc clocksource has been installed.
> > > > > > [   24.998681] Switched to high resolution mode on CPU 0
> > > > > > [   24.998786] Switched to high resolution mode on CPU 1
> > > > > > [   25.014660] system 00:01: iomem range 
> > > > > > 0xfed14000-0xfed19fff has been
> > > > > > reserved
> > > > > > [   25.014670] system 00:08: ioport range 0x400-0x41f 
> > > > > > has been reserved
> > > > > > [   25.014672] system 00:08: ioport range 0x4d0-0x4d1 
> > > > > > has been reserved
> > > > > > [   25.014674] system 00:08: ioport range 0x800-0x87f 
> > > > > > has been reserved
> > > > > > [   25.014677] system 00:08: ioport range 0x500-0x53f 
> > > > > > has been reserved
> > > > > > [   25.014679] system 00:08: iomem range 
> > > > > > 0xfed1c000-0xfed1ffff has been
> > > > > > reserved
> > > > > > [   25.014682] system 00:08: iomem range 
> > > > > > 0xfed20000-0xfed3ffff has been
> > > > > > reserved
> > > > > > [   25.014684] system 00:08: iomem range 
> > > > > > 0xfed40000-0xfed8ffff has been
> > > > > > reserved
> > > > > > [   25.014690] system 00:0a: iomem range 
> > > > > > 0xfec00000-0xfec00fff has been
> > > > > > reserved
> > > > > > [   25.014693] system 00:0a: iomem range 
> > > > > > 0xfee00000-0xfee00fff could
> > > > > > not
> > > > > > be
> > > > > > reserved
> > > > > > [   25.014698] system 00:0b: iomem range 
> > > > > > 0xe0000000-0xefffffff has been
> > > > > > reserved
> > > > > > [   25.014703] system 00:0c: iomem range 0x0-0x9ffff 
> > > > > > could not be
> > > > > > reserved
> > > > > > [   25.014706] system 00:0c: iomem range 0xc0000-0xcffff 
> > > > > > could not be
> > > > > > reserved
> > > > > > [   25.014708] system 00:0c: iomem range 0xe0000-0xfffff 
> > > > > > could not be
> > > > > > reserved
> > > > > > [   25.014711] system 00:0c: iomem range 
> > > > > > 0x100000-0x7fffffff could not
> > > > > > be
> > > > > > reserved
> > > > > > [   25.014713] system 00:0c: iomem range 
> > > > > > 0xfed90000-0xffffffff could
> > > > > > not
> > > > > > be
> > > > > > reserved
> > > > > > [   25.045096] PCI: Bridge: 0000:00:01.0
> > > > > > [   25.045099]   IO window: c000-cfff
> > > > > > [   25.045102]   MEM window: fa000000-fe0fffff
> > > > > > [   25.045105]   PREFETCH window: d0000000-dfffffff
> > > > > > [   25.045109] PCI: Bridge: 0000:00:1c.0
> > > > > > [   25.045110]   IO window: disabled.
> > > > > > [   25.045116]   MEM window: disabled.
> > > > > > [   25.045120]   PREFETCH window: disabled.
> > > > > > [   25.045126] PCI: Bridge: 0000:00:1c.3
> > > > > > [   25.045127]   IO window: disabled.
> > > > > > [   25.045133]   MEM window: fe100000-fe1fffff
> > > > > > [   25.045137]   PREFETCH window: disabled.
> > > > > > [   25.045143] PCI: Bridge: 0000:00:1c.4
> > > > > > [   25.045145]   IO window: d000-dfff
> > > > > > [   25.045151]   MEM window: fe200000-fe2fffff
> > > > > > [   25.045156]   PREFETCH window: disabled.
> > > > > > [   25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0
> > > > > > [   25.045171]   IO window: 0000e000-0000e0ff
> > > > > > [   25.045175]   IO window: 0000e400-0000e4ff
> > > > > > [   25.045180]   PREFETCH window: 88000000-8bffffff
> > > > > > [   25.045185]   MEM window: 8c000000-8fffffff
> > > > > > [   25.045190] PCI: Bridge: 0000:00:1e.0
> > > > > > [   25.045193]   IO window: e000-efff
> > > > > > [   25.045199]   MEM window: fe300000-febfffff
> > > > > > [   25.045204]   PREFETCH window: f7000000-f8ffffff
> > > > > > [   25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   25.045225] PCI: Setting latency timer of device 
> > > > > > 0000:00:01.0 to 64
> > > > > > [   25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   25.045255] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.0 to 64
> > > > > > [   25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] -> 
> > > > > > GSI 19 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 17
> > > > > > [   25.045285] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.3 to 64
> > > > > > [   25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   25.045315] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.4 to 64
> > > > > > [   25.045329] PCI: Setting latency timer of device 
> > > > > > 0000:00:1e.0 to 64
> > > > > > [   25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] -> 
> > > > > > GSI 22 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 18
> > > > > > [   25.045360] NET: Registered protocol family 2
> > > > > > [   25.082645] IP route cache hash table entries: 32768 
> > > > > > (order: 5,
> > > > > > 131072
> > > > > > bytes)
> > > > > > [   25.082845] TCP established hash table entries: 
> > > > > > 131072 (order: 8,
> > > > > > 1048576
> > > > > > bytes)
> > > > > > [   25.083237] TCP bind hash table entries: 65536 
> > > > > > (order: 7, 524288
> > > > > > bytes)
> > > > > > [   25.083430] TCP: Hash tables configured (established 
> > > > > > 131072 bind
> > > > > > 65536)
> > > > > > [   25.083432] TCP reno registered
> > > > > > [   25.094708] checking if image is initramfs... it is
> > > > > > [   25.722077] Freeing initrd memory: 7319k freed
> > > > > > [   25.722788] audit: initializing netlink socket 
> > > > > > (disabled)
> > > > > > [   25.722801] audit(1215874543.369:1): initialized
> > > > > > [   25.722995] highmem bounce pool size: 64 pages
> > > > > > [   25.724776] VFS: Disk quotas dquot_6.5.1
> > > > > > [   25.724842] Dquot-cache hash table entries: 1024 
> > > > > > (order 0, 4096
> > > > > > bytes)
> > > > > > [   25.724962] io scheduler noop registered
> > > > > > [   25.724964] io scheduler anticipatory registered
> > > > > > [   25.724965] io scheduler deadline registered
> > > > > > [   25.724978] io scheduler cfq registered (default)
> > > > > > [   25.725110] Boot video device is 0000:01:00.0
> > > > > > [   25.725211] PCI: Setting latency timer of device 
> > > > > > 0000:00:01.0 to 64
> > > > > > [   25.725249] assign_interrupt_mode Found MSI 
> > > > > > capability
> > > > > > [   25.725279] Allocate Port 
> > > > > > Service[0000:00:01.0:pcie00]
> > > > > > [   25.725312] Allocate Port 
> > > > > > Service[0000:00:01.0:pcie02]
> > > > > > [   25.725388] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.0 to 64
> > > > > > [   25.725449] assign_interrupt_mode Found MSI 
> > > > > > capability
> > > > > > [   25.725497] Allocate Port 
> > > > > > Service[0000:00:1c.0:pcie00]
> > > > > > [   25.725526] Allocate Port 
> > > > > > Service[0000:00:1c.0:pcie02]
> > > > > > [   25.725626] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.3 to 64
> > > > > > [   25.725687] assign_interrupt_mode Found MSI 
> > > > > > capability
> > > > > > [   25.725734] Allocate Port 
> > > > > > Service[0000:00:1c.3:pcie00]
> > > > > > [   25.725764] Allocate Port 
> > > > > > Service[0000:00:1c.3:pcie02]
> > > > > > [   25.725864] PCI: Setting latency timer of device 
> > > > > > 0000:00:1c.4 to 64
> > > > > > [   25.725924] assign_interrupt_mode Found MSI 
> > > > > > capability
> > > > > > [   25.725972] Allocate Port 
> > > > > > Service[0000:00:1c.4:pcie00]
> > > > > > [   25.726003] Allocate Port 
> > > > > > Service[0000:00:1c.4:pcie02]
> > > > > > [   25.726246] isapnp: Scanning for PnP cards...
> > > > > > [   26.081376] isapnp: No Plug & Play device found
> > > > > > [   26.104263] Real Time Clock Driver v1.12ac
> > > > > > [   26.104422] hpet_resources: 0xfed00000 is busy
> > > > > > [   26.104462] Serial: 8250/16550 driver $Revision: 1.90 
> > > > > > $ 4 ports, IRQ
> > > > > > sharing enabled
> > > > > > [   26.105578] RAMDISK driver initialized: 16 RAM disks 
> > > > > > of 65536K size
> > > > > > 1024
> > > > > > blocksize
> > > > > > [   26.105638] input: Macintosh mouse button emulation 
> > > > > > as
> > > > > > /devices/virtual/input/input0
> > > > > > [   26.105728] PNP: PS/2 Controller 
> > > > > > [PNP0303:PS2K,PNP0f13:PS2M] at
> > > > > > 0x60,0x64
> > > > > > irq 1,12
> > > > > > [   26.106070] i8042.c: Detected active multiplexing 
> > > > > > controller, rev
> > > > > > 1.1.
> > > > > > [   26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1
> > > > > > [   26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq 
> > > > > > 12
> > > > > > [   26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq 
> > > > > > 12
> > > > > > [   26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq 
> > > > > > 12
> > > > > > [   26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq 
> > > > > > 12
> > > > > > [   26.134091] mice: PS/2 mouse device common for all 
> > > > > > mice
> > > > > > [   26.134193] EISA: Probing bus 0 at eisa.0
> > > > > > [   26.134231] EISA: Detected 0 cards.
> > > > > > [   26.134234] cpuidle: using governor ladder
> > > > > > [   26.134235] cpuidle: using governor menu
> > > > > > [   26.134311] NET: Registered protocol family 1
> > > > > > [   26.134336] Using IPI No-Shortcut mode
> > > > > > [   26.134361] registered taskstats version 1
> > > > > > [   26.134462]   Magic number: 0:283:940
> > > > > > [   26.134491]   hash matches device ptyyb
> > > > > > [   26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0 
> > > > > > devices found
> > > > > > [   26.134527] EDD information not available.
> > > > > > [   26.134709] Freeing unused kernel memory: 368k freed
> > > > > > [   26.137228] input: AT Translated Set 2 keyboard as
> > > > > > /devices/platform/i8042/serio0/input/input1
> > > > > > [   26.228218] vesafb: framebuffer at 0xfb000000, mapped 
> > > > > > to 0xf8880000,
> > > > > > using 3750k, total 14336k
> > > > > > [   26.228221] vesafb: mode is 800x600x32, 
> > > > > > linelength=3200, pages=1
> > > > > > [   26.228223] vesafb: protected mode interface info at 
> > > > > > c000:b230
> > > > > > [   26.228226] vesafb: pmi: set display start = 
> > > > > > c00cb293, set palette =
> > > > > > c00cb2ee
> > > > > > [   26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 
> > > > > > 3c4 3c5 3c6 3c7
> > > > > > 3c8
> > > > > > 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
> > > > > > [   26.228240] vesafb: scrolling: redraw
> > > > > > [   26.228242] vesafb: Truecolor: size=8:8:8:8, 
> > > > > > shift=24:16:8:0
> > > > > > [   26.228336] Console: switching to colour frame buffer 
> > > > > > device 100x37
> > > > > > [   26.257461] fb0: VESA VGA frame buffer device
> > > > > > [   27.394531] fuse init (API version 7.9)
> > > > > > [   27.413176] ACPI: SSDT 7FFBE190, 0255 (r1  PmRef 
> > > > > > Cpu0Ist     3000
> > > > > > INTL
> > > > > > 20051117)
> > > > > > [   27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1  PmRef 
> > > > > > Cpu0Cst     3001
> > > > > > INTL
> > > > > > 20051117)
> > > > > > [   27.413641] Monitor-Mwait will be used to enter C-1 
> > > > > > state
> > > > > > [   27.413644] Monitor-Mwait will be used to enter C-2 
> > > > > > state
> > > > > > [   27.413646] Monitor-Mwait will be used to enter C-3 
> > > > > > state
> > > > > > [   27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2] 
> > > > > > C3[C3])
> > > > > > [   27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1  PmRef 
> > > > > > Cpu1Ist     3000
> > > > > > INTL
> > > > > > 20051117)
> > > > > > [   27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1  PmRef 
> > > > > > Cpu1Cst     3000
> > > > > > INTL
> > > > > > 20051117)
> > > > > > [   27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2] 
> > > > > > C3[C3])
> > > > > > [   27.416854] ACPI: Thermal Zone [THRM] (67 C)
> > > > > > [   27.722830] usbcore: registered new interface driver 
> > > > > > usbfs
> > > > > > [   27.722854] usbcore: registered new interface driver 
> > > > > > hub
> > > > > > [   27.722880] usbcore: registered new device driver usb
> > > > > > [   27.734151] USB Universal Host Controller Interface 
> > > > > > driver v3.0
> > > > > > [   27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   27.734213] PCI: Setting latency timer of device 
> > > > > > 0000:00:1a.0 to 64
> > > > > > [   27.734217] uhci_hcd 0000:00:1a.0: UHCI Host 
> > > > > > Controller
> > > > > > [   27.734416] uhci_hcd 0000:00:1a.0: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 1
> > > > > > [   27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base 
> > > > > > 0x0000bc00
> > > > > > [   27.734574] usb usb1: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   27.734596] hub 1-0:1.0: USB hub found
> > > > > > [   27.734600] hub 1-0:1.0: 2 ports detected
> > > > > > [   27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] -> 
> > > > > > GSI 21 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 19
> > > > > > [   27.838155] PCI: Setting latency timer of device 
> > > > > > 0000:00:1a.1 to 64
> > > > > > [   27.838160] uhci_hcd 0000:00:1a.1: UHCI Host 
> > > > > > Controller
> > > > > > [   27.838183] uhci_hcd 0000:00:1a.1: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 2
> > > > > > [   27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base 
> > > > > > 0x0000b880
> > > > > > [   27.838318] usb usb2: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   27.838340] hub 2-0:1.0: USB hub found
> > > > > > [   27.838345] hub 2-0:1.0: 2 ports detected
> > > > > > [   27.845899] SCSI subsystem initialized
> > > > > > [   27.864429] libata version 3.00 loaded.
> > > > > > [   27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> 
> > > > > > GSI 23 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 20
> > > > > > [   27.942119] PCI: Setting latency timer of device 
> > > > > > 0000:00:1d.0 to 64
> > > > > > [   27.942124] uhci_hcd 0000:00:1d.0: UHCI Host 
> > > > > > Controller
> > > > > > [   27.942146] uhci_hcd 0000:00:1d.0: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 3
> > > > > > [   27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base 
> > > > > > 0x0000b800
> > > > > > [   27.942286] usb usb3: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   27.942308] hub 3-0:1.0: USB hub found
> > > > > > [   27.942313] hub 3-0:1.0: 2 ports detected
> > > > > > [   28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] -> 
> > > > > > GSI 19 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 17
> > > > > > [   28.046055] PCI: Setting latency timer of device 
> > > > > > 0000:00:1d.1 to 64
> > > > > > [   28.046059] uhci_hcd 0000:00:1d.1: UHCI Host 
> > > > > > Controller
> > > > > > [   28.046082] uhci_hcd 0000:00:1d.1: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 4
> > > > > > [   28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base 
> > > > > > 0x0000b480
> > > > > > [   28.046220] usb usb4: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   28.046242] hub 4-0:1.0: USB hub found
> > > > > > [   28.046246] hub 4-0:1.0: 2 ports detected
> > > > > > [   28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] -> 
> > > > > > GSI 18 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 21
> > > > > > [   28.152998] PCI: Setting latency timer of device 
> > > > > > 0000:00:1d.2 to 64
> > > > > > [   28.153003] uhci_hcd 0000:00:1d.2: UHCI Host 
> > > > > > Controller
> > > > > > [   28.153025] uhci_hcd 0000:00:1d.2: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 5
> > > > > > [   28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base 
> > > > > > 0x0000b400
> > > > > > [   28.153166] usb usb5: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   28.153188] hub 5-0:1.0: USB hub found
> > > > > > [   28.153192] hub 5-0:1.0: 2 ports detected
> > > > > > [   28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] -> 
> > > > > > GSI 18 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 21
> > > > > > [   28.256978] PCI: Setting latency timer of device 
> > > > > > 0000:00:1a.7 to 64
> > > > > > [   28.256982] ehci_hcd 0000:00:1a.7: EHCI Host 
> > > > > > Controller
> > > > > > [   28.257007] ehci_hcd 0000:00:1a.7: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 6
> > > > > > [   28.260906] ehci_hcd 0000:00:1a.7: debug port 1
> > > > > > [   28.260913] PCI: cache line size of 32 is not 
> > > > > > supported by device
> > > > > > 0000:00:1a.7
> > > > > > [   28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem 
> > > > > > 0xf9fffc00
> > > > > > [   28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started, 
> > > > > > EHCI 1.00,
> > > > > > driver
> > > > > > 10
> > > > > > Dec 2004
> > > > > > [   28.273924] usb usb6: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   28.273948] hub 6-0:1.0: USB hub found
> > > > > > [   28.273953] hub 6-0:1.0: 4 ports detected
> > > > > > [   28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> 
> > > > > > GSI 23 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 20
> > > > > > [   28.377923] PCI: Setting latency timer of device 
> > > > > > 0000:00:1d.7 to 64
> > > > > > [   28.377928] ehci_hcd 0000:00:1d.7: EHCI Host 
> > > > > > Controller
> > > > > > [   28.377961] ehci_hcd 0000:00:1d.7: new USB bus 
> > > > > > registered, assigned
> > > > > > bus
> > > > > > number 7
> > > > > > [   28.381881] ehci_hcd 0000:00:1d.7: debug port 1
> > > > > > [   28.381887] PCI: cache line size of 32 is not 
> > > > > > supported by device
> > > > > > 0000:00:1d.7
> > > > > > [   28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem 
> > > > > > 0xf9fff800
> > > > > > [   28.392765] usb 4-2: new low speed USB device using 
> > > > > > uhci_hcd and
> > > > > > address
> > > > > > 2
> > > > > > [   28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started, 
> > > > > > EHCI 1.00,
> > > > > > driver
> > > > > > 10
> > > > > > Dec 2004
> > > > > > [   28.400897] usb usb7: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   28.400919] hub 7-0:1.0: USB hub found
> > > > > > [   28.400924] hub 7-0:1.0: 6 ports detected
> > > > > > [   28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] -> 
> > > > > > GSI 22 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 18
> > > > > > [   28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): 
> > > > > > IRQ=[18]
> > > > > >  MMIO=[fe3fd000-fe3fd7ff]  Max Packet=[2048] IR/IT 
> > > > > > contexts=[8/8]
> > > > > > [   28.558719] r8169 Gigabit Ethernet driver 2.2LK 
> > > > > > loaded
> > > > > > [   28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   28.558818] PCI: Setting latency timer of device 
> > > > > > 0000:04:00.0 to 64
> > > > > > [   28.559325] eth0: RTL8168b/8111b at 0xf8c44000, 
> > > > > > 00:19:db:3b:be:ed,
> > > > > > XID
> > > > > > 38000000 IRQ 219
> > > > > > [   28.848496] Clocksource tsc unstable (delta = 
> > > > > > -3284221791 ns)
> > > > > > [   28.852488] Time: hpet clocksource has been 
> > > > > > installed.
> > > > > > [   28.881456] usb 7-5: new high speed USB device using 
> > > > > > ehci_hcd and
> > > > > > address
> > > > > > 3
> > > > > > [   29.020706] usb 7-5: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   29.178496] ata_piix 0000:00:1f.2: version 2.12
> > > > > > [   29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE 
> > > > > > IDE ]
> > > > > > [   29.186100] usb 4-2: new low speed USB device using 
> > > > > > uhci_hcd and
> > > > > > address
> > > > > > 3
> > > > > > [   29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] -> 
> > > > > > GSI 18 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 21
> > > > > > [   29.200001] PCI: Setting latency timer of device 
> > > > > > 0000:00:1f.2 to 64
> > > > > > [   29.200144] scsi0 : ata_piix
> > > > > > [   29.200386] scsi1 : ata_piix
> > > > > > [   29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 
> > > > > > 0x3f6 bmdma 0xffa0
> > > > > > irq
> > > > > > 14
> > > > > > [   29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl 
> > > > > > 0x376 bmdma 0xffa8
> > > > > > irq
> > > > > > 15
> > > > > > [   29.213016] usb 4-2: configuration #1 chosen from 1 
> > > > > > choice
> > > > > > [   29.232150] usbcore: registered new interface driver 
> > > > > > hiddev
> > > > > > [   29.237144] input: A4Tech PS/2+USB Mouse as
> > > > > > /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2
> > > > > > [   29.244652] input,hidraw0: USB HID v1.10 Mouse 
> > > > > > [A4Tech PS/2+USB
> > > > > > Mouse]
> > > > > > on
> > > > > > usb-0000:00:1d.1-2
> > > > > > [   29.244671] usbcore: registered new interface driver 
> > > > > > usbhid
> > > > > > [   29.244676]
> > > > > > /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
> > > > > > v2.6:USB HID core driver
> > > > > > [   29.271950] ieee1394: Host added: ID:BUS[0-00:1023]
> > > > > > GUID[00dc10003a871c01]
> > > > > > [   29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 
> > > > > > 04.01G04, max
> > > > > > UDMA/133
> > > > > > [   29.297941] ata1.00: 312581808 sectors, multi 16: 
> > > > > > LBA48 NCQ (depth
> > > > > > 0/32)
> > > > > > [   29.299183] ata1.00: configured for UDMA/133
> > > > > > [   29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, 
> > > > > > EX32, max
> > > > > > UDMA/33
> > > > > > [   29.363736] ata2.01: configured for UDMA/33
> > > > > > [   29.363918] scsi 0:0:0:0: Direct-Access     ATA  WDC 
> > > > > > WD1600BEVS-0
> > > > > > 04.0
> > > > > > PQ: 0 ANSI: 5
> > > > > > [   29.364680] scsi 1:0:1:0: CD-ROM            Optiarc 
> > > > > > DVD RW AD-7530A
> > > > > >  EX32
> > > > > > PQ: 0 ANSI: 5
> > > > > > [   29.375749] Driver 'sd' needs updating - please use 
> > > > > > bus_type methods
> > > > > > [   29.375816] sd 0:0:0:0: [sda] 312581808 512-byte 
> > > > > > hardware sectors
> > > > > > (160042
> > > > > > MB)
> > > > > > [   29.375827] sd 0:0:0:0: [sda] Write Protect is off
> > > > > > [   29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > > > > [   29.375845] sd 0:0:0:0: [sda] Write cache: enabled, 
> > > > > > read cache:
> > > > > > enabled,
> > > > > > doesn't support DPO or FUA
> > > > > > [   29.375891] sd 0:0:0:0: [sda] 312581808 512-byte 
> > > > > > hardware sectors
> > > > > > (160042
> > > > > > MB)
> > > > > > [   29.375900] sd 0:0:0:0: [sda] Write Protect is off
> > > > > > [   29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > > > > [   29.375918] sd 0:0:0:0: [sda] Write cache: enabled, 
> > > > > > read cache:
> > > > > > enabled,
> > > > > > doesn't support DPO or FUA
> > > > > > [   29.375921]  sda:<4>Driver 'sr' needs updating - 
> > > > > > please use bus_type
> > > > > > methods
> > > > > > [   29.416876]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
> > > > > > [   29.448097] sd 0:0:0:0: [sda] Attached SCSI disk
> > > > > > [   29.451456] sr0: scsi3-mmc drive: 24x/24x writer 
> > > > > > dvd-ram cd/rw
> > > > > > xa/form2
> > > > > > cdda tray
> > > > > > [   29.451460] Uniform CD-ROM driver Revision: 3.20
> > > > > > [   29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0
> > > > > > [   29.453330] sd 0:0:0:0: Attached scsi generic sg0 
> > > > > > type 0
> > > > > > [   29.453348] sr 1:0:1:0: Attached scsi generic sg1 
> > > > > > type 5
> > > > > > [   29.984062] Attempting manual resume
> > > > > > [   29.984065] swsusp: Resume From Partition 8:5
> > > > > > [   29.984067] PM: Checking swsusp image.
> > > > > > [   29.984307] PM: Resume from disk failed.
> > > > > > [   30.020273] kjournald starting.  Commit interval 5 
> > > > > > seconds
> > > > > > [   30.020310] EXT3-fs: mounted filesystem with ordered 
> > > > > > data mode.
> > > > > > [   39.106307] input: PC Speaker as
> > > > > > /devices/platform/pcspkr/input/input3
> > > > > > [   39.182164] pci_hotplug: PCI Hot Plug PCI Core 
> > > > > > version: 0.5
> > > > > > [   39.214162] shpchp: Standard Hot Plug PCI Controller 
> > > > > > Driver version:
> > > > > > 0.4
> > > > > > [   39.314029] Linux agpgart interface v0.102
> > > > > > [   39.344769] iTCO_vendor_support: vendor-support=0
> > > > > > [   39.356145] iTCO_wdt: Intel TCO WatchDog Timer Driver 
> > > > > > v1.02
> > > > > > (26-Jul-2007)
> > > > > > [   39.356213] iTCO_wdt: Found a ICH8M TCO device 
> > > > > > (Version=2,
> > > > > > TCOBASE=0x0860)
> > > > > > [   39.356253] iTCO_wdt: initialized. heartbeat=30 sec 
> > > > > > (nowayout=0)
> > > > > > [   39.376103] input: Power Button (FF) as
> > > > > > /devices/virtual/input/input4
> > > > > > [   39.397945] ACPI: Power Button (FF) [PWRF]
> > > > > > [   39.398024] input: Lid Switch as 
> > > > > > /devices/virtual/input/input5
> > > > > > [   39.398442] ACPI: Lid Switch [LID0]
> > > > > > [   39.398525] input: Power Button (CM) as
> > > > > > /devices/virtual/input/input6
> > > > > > [   39.420942] ACPI: Power Button (CM) [PWRB]
> > > > > > [   40.062138] Yenta: CardBus bridge found at 
> > > > > > 0000:05:04.0 [1462:3fe9]
> > > > > > [   40.062165] Yenta O2: res at 0x94/0xD4: 00/ea
> > > > > > [   40.062167] Yenta O2: enabling read prefetch/write 
> > > > > > burst
> > > > > > [   40.190436] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
> > > > > > [   40.190441] Socket status: 30000006
> > > > > > [   40.190443] Yenta: Raising subordinate bus# of parent 
> > > > > > bus (#05) from
> > > > > > #06
> > > > > > to #09
> > > > > > [   40.190448] pcmcia: parent PCI bridge I/O window: 
> > > > > > 0xe000 - 0xefff
> > > > > > [   40.190450] cs: IO port probe 0xe000-0xefff: clean.
> > > > > > [   40.190687] pcmcia: parent PCI bridge Memory window: 
> > > > > > 0xfe300000 -
> > > > > > 0xfebfffff
> > > > > > [   40.190689] pcmcia: parent PCI bridge Memory window: 
> > > > > > 0xf7000000 -
> > > > > > 0xf8ffffff
> > > > > > [   40.509499] ACPI: Battery Slot [BAT1] (battery 
> > > > > > absent)
> > > > > > [   40.525446] sdhci: Secure Digital Host Controller 
> > > > > > Interface driver
> > > > > > [   40.525449] sdhci: Copyright(c) Pierre Ossman
> > > > > > [   40.525490] sdhci: SDHCI controller found at 
> > > > > > 0000:05:04.2
> > > > > > [1217:7120]
> > > > > > (rev 2)
> > > > > > [   40.525517] ACPI: PCI Interrupt 0000:05:04.2[A] -> 
> > > > > > GSI 22 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 18
> > > > > > [   40.525535] sdhci:slot0: Unknown controller version 
> > > > > > (2). You may
> > > > > > experience problems.
> > > > > > [   40.525590] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA
> > > > > > [   40.530106] ACPI: AC Adapter [ADP1] (on-line)
> > > > > > [   40.584449] input: Video Bus as
> > > > > >
> > > > > >
> > > > > > /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
> > > > > > [   40.626708] mmc0: new high speed SD card at address 
> > > > > > b368
> > > > > > [   40.626724] Linux video capture interface: v2.00
> > > > > > [   40.633956] ACPI: Video Device [NVGA] (multi-head: 
> > > > > > yes rom: no
> > > > > >  post:
> > > > > > no)
> > > > > > [   40.650802] nvidia: module license 'NVIDIA' taints 
> > > > > > kernel.
> > > > > > [   40.905503] ACPI: PCI Interrupt 0000:01:00.0[A] -> 
> > > > > > GSI 16 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 16
> > > > > > [   40.905517] PCI: Setting latency timer of device 
> > > > > > 0000:01:00.0 to 64
> > > > > > [   40.905638] NVRM: loading NVIDIA UNIX x86 Kernel 
> > > > > > Module 169.12  Thu
> > > > > > Feb
> > > > > > 14 17:53:07 PST 2008
> > > > > > [   41.107933] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG 
> > > > > > Network
> > > > > > Connection
> > > > > > driver for Linux, 1.2.0
> > > > > > [   41.107937] iwl3945: Copyright(c) 2003-2007 Intel 
> > > > > > Corporation
> > > > > > [   41.108046] ACPI: PCI Interrupt 0000:03:00.0[A] -> 
> > > > > > GSI 19 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 17
> > > > > > [   41.108067] PCI: Setting latency timer of device 
> > > > > > 0000:03:00.0 to 64
> > > > > > [   41.108094] iwl3945: Detected Intel PRO/Wireless 
> > > > > > 3945ABG Network
> > > > > > Connection
> > > > > > [   41.113192] uvcvideo: Found UVC 1.00 device USB 2.0 
> > > > > > Camera
> > > > > > (0c45:62c0)
> > > > > > [   41.157982] usbcore: registered new interface driver 
> > > > > > uvcvideo
> > > > > > [   41.157987] USB Video Class driver (v0.1.0)
> > > > > > [   41.163654] Synaptics Touchpad, model: 1, fw: 6.1, 
> > > > > > id: 0xa3a0b3,
> > > > > > caps:
> > > > > > 0xa04713/0x10008
> > > > > > [   41.205402] input: SynPS/2 Synaptics TouchPad as
> > > > > > /devices/platform/i8042/serio4/input/input8
> > > > > > [   41.527140] mmcblk0: mmc0:b368 SMI   124160KiB
> > > > > > [   41.527171]  mmcblk0: unknown partition table
> > > > > > [   41.548058] iwl3945: Radio Frequency Kill Switch is 
> > > > > > On:
> > > > > > [   41.548060] Kill switch must be turned off for 
> > > > > > wireless networking
> > > > > > to
> > > > > > work.
> > > > > > [   41.552637] iwl3945: WARNING: Requesting MAC access 
> > > > > > during RFKILL
> > > > > > wakes
> > > > > > up NIC
> > > > > > [   41.562730] iwl3945: WARNING: Requesting MAC access 
> > > > > > during RFKILL
> > > > > > wakes
> > > > > > up NIC
> > > > > > [   41.582688] iwl3945: WARNING: Requesting MAC access 
> > > > > > during RFKILL
> > > > > > wakes
> > > > > > up NIC
> > > > > > [   41.612899] iwl3945: WARNING: Requesting MAC access 
> > > > > > during RFKILL
> > > > > > wakes
> > > > > > up NIC
> > > > > > [   41.632896] iwl3945: Tunable channels: 13 802.11bg, 
> > > > > > 23 802.11a
> > > > > > channels
> > > > > > [   41.673310] cs: IO port probe 0x100-0x3af: clean.
> > > > > > [   41.675403] cs: IO port probe 0x3e0-0x4ff: clean.
> > > > > > [   41.676206] cs: IO port probe 0x820-0x8ff: clean.
> > > > > > [   41.676648] cs: IO port probe 0xc00-0xcf7: clean.
> > > > > > [   41.677543] cs: IO port probe 0xa00-0xaff: clean.
> > > > > > [   41.951205] ACPI: PCI Interrupt 0000:00:1b.0[A] -> 
> > > > > > GSI 21 (level,
> > > > > > low)
> > > > > > ->
> > > > > > IRQ 19
> > > > > > [   41.951224] PCI: Setting latency timer of device 
> > > > > > 0000:00:1b.0 to 64
> > > > > > [   41.959807] hda_codec: Unknown model for ALC883, 
> > > > > > trying auto-probe
> > > > > > from
> > > > > > BIOS...
> > > > > > [   42.148966] lp: driver loaded but no devices found
> > > > > > [   42.292437] Adding 4198396k swap on /dev/sda5. 
> > > > > > Priority:-1 extents:1
> > > > > > across:4198396k
> > > > > > [   42.718838] EXT3 FS on sda6, internal journal
> > > > > > [   43.959928] ip_tables: (C) 2000-2006 Netfilter Core 
> > > > > > Team
> > > > > > [   44.382509] No dock devices found.
> > > > > > [   46.545179] apm: BIOS not found.
> > > > > > [   46.658069] ppdev: user-space parallel port driver
> > > > > > [   46.791061] audit(1215863779.828:2): type=1503
> > > > > > operation="inode_permission" requested_mask="a::" 
> > > > > > denied_mask="a::"
> > > > > > name="/dev/tty" pid=5516 profile="/usr/sbin/cupsd" 
> > > > > > namespace="default"
> > > > > > [   48.952388] NET: Registered protocol family 10
> > > > > > [   48.952852] lo: Disabled Privacy Extensions
> > > > > > [   50.404479] Bluetooth: Core ver 2.11
> > > > > > [   50.404858] NET: Registered protocol family 31
> > > > > > [   50.404864] Bluetooth: HCI device and connection 
> > > > > > manager initialized
> > > > > > [   50.404871] Bluetooth: HCI socket layer initialized
> > > > > > [   50.471186] Bluetooth: L2CAP ver 2.9
> > > > > > [   50.471195] Bluetooth: L2CAP socket layer initialized
> > > > > > [   50.569202] Bluetooth: RFCOMM socket layer 
> > > > > > initialized
> > > > > > [   50.569223] Bluetooth: RFCOMM TTY layer initialized
> > > > > > [   50.569227] Bluetooth: RFCOMM ver 1.8
> > > > > > [   50.775034] r8169: eth0: link up
> > > > > > [   52.174818] NET: Registered protocol family 17
> > > > > > [   65.454676] CPU0 attaching NULL sched-domain.
> > > > > > [   65.454687] CPU1 attaching NULL sched-domain.
> > > > > > [   65.459351] CPU0 attaching sched-domain:
> > > > > > [   65.459362]  domain 0: span 03
> > > > > > [   65.459367]   groups: 01 02
> > > > > > [   65.459373] CPU1 attaching sched-domain:
> > > > > > [   65.459377]  domain 0: span 03
> > > > > > [   65.459380]   groups: 02 01
> > > > > > [   73.153942] UDF-fs: No VRS found
> > > > > > [   73.178375] ISO 9660 Extensions: Microsoft Joliet 
> > > > > > Level 3
> > > > > > [   73.389942] ISOFS: changing to secondary root
> > > > > > [   76.466197] atkbd.c: Unknown key pressed (translated 
> > > > > > set 2, code
> > > > > > 0xf6
> > > > > > on
> > > > > > isa0060/serio0).
> > > > > > [   76.466209] atkbd.c: Use 'setkeycodes e076 <keycode>' 
> > > > > > to make it
> > > > > > known.
> > > > > > [   76.566510] atkbd.c: Unknown key released (translated 
> > > > > > set 2, code
> > > > > > 0xf6
> > > > > > on
> > > > > > isa0060/serio0).
> > > > > > [   76.566519] atkbd.c: Use 'setkeycodes e076 <keycode>' 
> > > > > > to make it
> > > > > > known.
> > > > > > [   76.671452] wmaster0: Selected rate control algorithm 
> > > > > > 'iwl-3945-rs'
> > > > > > [   76.874415] ADDRCONF(NETDEV_UP): wlan0: link is not 
> > > > > > ready
> > > > > > [   81.572469] NETDEV WATCHDOG: eth0: transmit timed out
> > > > > > [   81.845751] r8169: eth0: link up
> > > > > > [   92.756596] NETDEV WATCHDOG: eth0: transmit timed out
> > > > > > [   93.049381] r8169: eth0: link up
> > > > > > [   97.659156] wlan0: Initial auth_alg=0
> > > > > > [   97.659168] wlan0: authenticate with AP 
> > > > > > 00:02:6f:45:59:71
> > > > > > [   97.661681] wlan0: Initial auth_alg=0
> > > > > > [   97.661690] wlan0: authenticate with AP 
> > > > > > 00:02:6f:45:59:71
> > > > > > [   97.662510] wlan0: Initial auth_alg=0
> > > > > > [   97.662518] wlan0: authenticate with AP 
> > > > > > 00:02:6f:45:59:71
> > > > > > [   97.671569] wlan0: RX authentication from 
> > > > > > 00:02:6f:45:59:71 (alg=0
> > > > > > transaction=2 status=0)
> > > > > > [   97.671581] wlan0: authenticated
> > > > > > [   97.671586] wlan0: associate with AP 
> > > > > > 00:02:6f:45:59:71
> > > > > > [   97.674286] wlan0: authentication frame received from
> > > > > > 00:02:6f:45:59:71,
> > > > > > but not in authenticate state - ignored
> > > > > > [   97.675732] wlan0: authentication frame received from
> > > > > > 00:02:6f:45:59:71,
> > > > > > but not in authenticate state - ignored
> > > > > > [   97.679234] wlan0: RX AssocResp from 
> > > > > > 00:02:6f:45:59:71 (capab=0x1
> > > > > > status=0 aid=11)
> > > > > > [   97.679245] wlan0: associated
> > > > > > [   97.683747] ADDRCONF(NETDEV_CHANGE): wlan0: link 
> > > > > > becomes ready
> > > > > > [   98.781032] wlan0: no IPv6 routers present
> > > > > > ==========
> > > > > > On Fri, 11 Jul 2008 08:12:41 -0400
> > > > > >  "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > > > RE: modem is Agere Systems HDA Modem
> > > > > > > Roan from the Details tab of the Driver information, the 
> > > > > > > Device
> > > > > > > information is needed
> > > > > > > 11C1 is the Agere Vendor designation, Likely the Device 
> > > > > > > is either 1040
> > > > > > > or 3026, which need entirely different support.
> > > > > > >
> > > > > > > Also please do
> > > > > > > $ lsmod >> roan.txt
> > > > > > > $ dmesg >> roan.txt
> > > > > > > and send us the roan.txt
> > > > > > >
> > > > > > > Is the Audio functioning?
> > > > > > >
> > > > > > > MarvS
> > > > > > >
> > > > > > > On Fri, Jul 11, 2008 at 2:36 AM, roan <roan@xxxxxxxx> 
> > > > > > > wrote:
> > > > > > > > my modem is Agere Systems HDA Modem
> > > > > > > >
> > > > > > > >
> > > > > > > > On Thu, 10 Jul 2008 17:59:04 -0400
> > > > > > > >  "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > > > > > Roan,
> > > > > > > > >
> > > > > > > > > I presume your modem is internal and Not one of
> > > > > > > > > Attached USB devices:
> > > > > > > > > ID 09da:000a A4 Tech Co., Ltd
> > > > > > > > > ID 0c45:62c0 Microdia.
> > > > > > > > >
> > > > > > > > > Read the Softmodem.txt  for instructions for doing modem 
> > > > > > > > > diagnositcs
> > > > > > > > > under Microsoft.
> > > > > > > > >
> > > > > > > > > MarvS
> > > > > > > > >
> > > > > > > > > On Thu, Jul 10, 2008 at 1:07 PM, roan <roan@xxxxxxxx> 
> > > > > > > > > wrote:
> > > > > > > > > > thx for an answer, Marvin
> > > > > > > > > > i did all as you said, but $ sudo wvdialconf 
> > > > > > > > > > /etc/wvdial.conf now
> > > > > > > > > > says
> > > > > > > > > > this:
> > > > > > > > > > $ sudo wvdialconf /etc/wvdial.conf
> > > > > > > > > > Editing `/etc/wvdial.conf'.
> > > > > > > > > >
> > > > > > > > > > Scanning your serial ports for a modem.
> > > > > > > > > >
> > > > > > > > > > Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem 
> > > > > > > > > > is a link
> > > > > > > > > > to
> > > > > > > > > > it.
> > > > > > > > > > Modem Port Scan<*1>: SHSF0 S0   S1   S2   S3   SHSF1 
> > > > > > > > > > SHSF2 SHSF3
> > > > > > > > > > Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Sorry, no modem was detected!  Is it in use by another 
> > > > > > > > > > program?
> > > > > > > > > > Did you configure it properly with setserial?
> > > > > > > > > >
> > > > > > > > > > what alse should i do?
> > > > > > > > > > thx in advance
> > > > > > > > > >
> > > > > > > > > > On Thu, 10 Jul 2008 07:45:02 -0400
> > > > > > > > > >  "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > > > > > > > Roan
> > > > > > > > > > >
> > > > > > > > > > > Your most likely situation is:
> > > > > > > > > > >
> > > > > > > > > > > High Definition Audio (HDA) cards MAY host a modem chip 
> > > > > > > > > > > in their
> > > > > > > > > > > Subsystem,
> > > > > > > > > > > and many are supported by the ALSA audio+modem driver
> > > > > > > > > > > snd-hda-intel
> > > > > > > > > > > A modem was not detected on HDA card 8086:284b.
> > > > > > > > > > > If another modem card is present, then most likely 
> > > > > > > > > > > 8086:284b does
> > > > > > > > > > > not
> > > > > > > > > > > host a modem.
> > > > > > > > > > > If another modem card has not been detected, then 
> > > > > > > > > > > possibilities
> > > > > > > > > > > are:
> > > > > > > > > > >  1) A Conexant modem chip is present on 8086:284b, as 
> > > > > > > > > > > Conexant
> > > > > > > > > > > chips
> > > > > > > > > > > are frequently not detectable by ALSA diagnostics
> > > > > > > > > > >
> > > > > > > > > > > so try
> > > > > > > > > > >
> > > > > > > > > > > From
> > > > > > > > > > > http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> > > > > > > > > > > download
> > > > > > > > > > > hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip
> > > > > > > > > > > Under Linux unpack with:
> > > > > > > > > > > $ unzip hsfmodem*.zip
> > > > > > > > > > > Then install with:
> > > > > > > > > > > $ sudo dpkg -i hsfmodem*.deb
> > > > > > > > > > > Subsequently, the modem should be found with
> > > > > > > > > > > $ sudo wvdialconf /etc/wvdial.conf
> > > > > > > > > > > Edit in your personal information with:
> > > > > > > > > > > $ sudo gedit /etc/wvdial.conf
> > > > > > > > > > > and try dialing out with:
> > > > > > > > > > > $ sudo wvdial.
> > > > > > > > > > > See DOCs/Testing.txt  for details.
> > > > > > > > > > >  Read DOCs/Conexant.txt
> > > > > > > > > > >
> > > > > > > > > > > Please report back after thus testing,
> > > > > > > > > > >
> > > > > > > > > > > MarvS
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Thu, Jul 10, 2008 at 7:16 AM, roan <roan@xxxxxxxx> 
> > > > > > > > > > > wrote:
> > > > > > > > > > > >  Only plain text email is forwarded by the 
> > > > > > > > > > > > Discuss@xxxxxxxxxxxxx
> > > > > > > > > > > > List
> > > > > > > > > > > > Server,
> > > > > > > > > > > >  as HTML can contain viruses. Use as the email Subject 
> > > > > > > > > > > > Line:
> > > > > > > > > > > >      YourName, YourCountry  kernel 2.6.24-18-generic
> > > > > > > > > > > >  With this Subject Line cogent experts will be alerted, 
> > > > > > > > > > > > and
> > > > > > > > > > > > useful
> > > > > > > > > > > > case
> > > > > > > > > > > > names left in the Archive.
> > > > > > > > > > > >  YourCountry will enable Country specific guidance. 
> > > > > > > > > > > > Linux experts
> > > > > > > > > > > > in
> > > > > > > > > > > > YourCountry
> > > > > > > > > > > >  can be found through: 
> > > > > > > > > > > > http://www.linux.org/groups/index.html.
> > > > > > > > > > > > They will know your Country's modem code, which may be 
> > > > > > > > > > > > essential
> > > > > > > > > > > > for
> > > > > > > > > > > > dialup
> > > > > > > > > > > > service.
> > > > > > > > > > > > Responses from Discuss@xxxxxxxxxxxxx are sometimes 
> > > > > > > > > > > > blocked by an
> > > > > > > > > > > > Internet
> > > > > > > > > > > > Provider mail filters.
> > > > > > > > > > > >  So in a day, also check the Archived responses at
> > > > > > > > > > > > http://www.linmodems.org
> > > > > > > > > > > > --------------------------  System information
> > > > > > > > > > > > ----------------------------
> > > > > > > > > > > > CPU=i686,
> > > > > > > > > > > > Linux version 2.6.24-18-generic (buildd@terranova) (gcc 
> > > > > > > > > > > > version
> > > > > > > > > > > > 4.2.3
> > > > > > > > > > > > (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 
> > > > > > > > > > > > 2008
> > > > > > > > > > > >  scanModem update of:  2008_06_28
> > > > > > > > > > > >
> > > > > > > > > > > >  There are no blacklisted modem drivers in 
> > > > > > > > > > > > /etc/modprobe* files
> > > > > > > > > > > > Attached USB devices are:
> > > > > > > > > > > >  ID 09da:000a A4 Tech Co., Ltd
> > > > > > > > > > > >  ID 0c45:62c0 Microdia
> > > > > > > > > > > >
> > > > > > > > > > > > USB modems not recognized
> > > > > > > > > > > >
> > > > > > > > > > > > For candidate card in slot 00:1b.0, firmware information 
> > > > > > > > > > > > and
> > > > > > > > > > > > bootup
> > > > > > > > > > > > diagnostics are:
> > > > > > > > > > > >  PCI slot       PCI ID          SubsystemID     Name
> > > > > > > > > > > >  ----------     ---------       --------- --------------
> > > > > > > > > > > >  00:1b.0        8086:284b       1462:3fe9       Audio 
> > > > > > > > > > > > device:
> > > > > > > > > > > > Intel
> > > > > > > > > > > > Corporation 82801H
> > > > > > > > > > > >
> > > > > > > > > > > >  Modem interrupt assignment and sharing:
> > > > > > > > > > > >  21:        407        392   IO-APIC-fasteoi 
> > > > > > > > > > > > uhci_hcd:usb4, HDA
> > > > > > > > > > > > Intel
> > > > > > > > > > > >  --- Bootup diagnostics for card in PCI slot 00:1b.0 
> > > > > > > > > > > > ----
> > > > > > > > > > > > [   34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> 
> > > > > > > > > > > > GSI 21
> > > > > > > > > > > > (level,
> > > > > > > > > > > > low)
> > > > > > > > > > > > ->
> > > > > > > > > > > > IRQ 21
> > > > > > > > > > > > [   34.842316] PCI: Setting latency timer of device 
> > > > > > > > > > > > 0000:00:1b.0
> > > > > > > > > > > > to
> > > > > > > > > > > > 64
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > ===== Advanced Linux Sound Architecture (ALSA) 
> > > > > > > > > > > > diagnostics =====
> > > > > > > > > > > > The ALSA packages provide audio support and also drivers 
> > > > > > > > > > > > for some
> > > > > > > > > > > > modems.
> > > > > > > > > > > > ALSA diagnostics are written during bootup to 
> > > > > > > > > > > > /proc/asound/
> > > > > > > > > > > > folders.
> > > > > > > > > > > >
> > > > > > > > > > > >  PCI slot 00:1b.0 has a High Definition Audio Card
> > > > > > > > > > > >  The drivers are in the kernel modules tree at:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >  /lib/modules/2.6.24-18-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
> > > > > > > > > > > >
> > > > > > > > > > > > The ALSA verion is 1.0.15
> > > > > > > > > > > > The modem cards detected by "aplay -l"  are: None
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > The /proc/asound/pcm file reports:
> > > > > > > > > > > > -----------------------
> > > > > > > > > > > > 00-02: ALC883 Analog : ALC883 Analog : capture 1
> > > > > > > > > > > > 00-01: ALC883 Digital : ALC883 Digital : playback 1
> > > > > > > > > > > > 00-00: ALC883 Analog : ALC883 Analog : playback 1 : 
> > > > > > > > > > > > capture 1
> > > > > > > > > > > >
> > > > > > > > > > > > about /proc/asound/cards:
> > > > > > > > > > > > ------------------------
> > > > > > > > > > > >  0 [Intel          ]: HDA-Intel - HDA Intel
> > > > > > > > > > > >                 HDA Intel at 0xf9ff8000 irq 21
> > > > > > > > > > > > === Finished firmware and bootup diagnostics, next 
> > > > > > > > > > > > deducing
> > > > > > > > > > > > cogent
> > > > > > > > > > > > software.
> > > > > > > > > > > > ===
> > > > > > > > > > > >
> > > > > > > > > > > > A candidate modem is not evident among the PCI devices:
> > > > > > > > > > > > ------------------------------------------------
> > > > > > > > > > > > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 
> > > > > > > > > > > > Family) HD
> > > > > > > > > > > > Audio
> > > > > > > > > > > > Controller (rev 03)
> > > > > > > > > > > > 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM
> > > > > > > > > > > > (ICH8M/ICH8M-E)
> > > > > > > > > > > > SATA
> > > > > > > > > > > > IDE Controller (rev 03)
> > > > > > > > > > > > 01:00.0 VGA compatible controller: nVidia Corporation 
> > > > > > > > > > > > GeForce
> > > > > > > > > > > > 8400M
> > > > > > > > > > > > G
> > > > > > > > > > > > (rev
> > > > > > > > > > > > a1)
> > > > > > > > > > > > 03:00.0 Network controller: Intel Corporation 
> > > > > > > > > > > > PRO/Wireless
> > > > > > > > > > > > 3945ABG
> > > > > > > > > > > > Network
> > > > > > > > > > > > Connection (rev 02)
> > > > > > > > > > > > 04:00.0 Ethernet controller: Realtek Semiconductor Co., 
> > > > > > > > > > > > Ltd.
> > > > > > > > > > > > RTL8111/8168B
> > > > > > > > > > > > PCI Express Gigabit Ethernet controller (rev 01)
> > > > > > > > > > > > 05:04.2 SD Host controller: O2 Micro, Inc. Integrated 
> > > > > > > > > > > > MMC/SD
> > > > > > > > > > > > Controller
> > > > > > > > > > > > (rev
> > > > > > > > > > > > 02)
> > > > > > > > > > > > 05:04.3 Mass storage controller: O2 Micro, Inc. 
> > > > > > > > > > > > Integrated MS/xD
> > > > > > > > > > > > Controller
> > > > > > > > > > > > (rev 01)
> > > > > > > > > > > > 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire 
> > > > > > > > > > > > (IEEE 1394)
> > > > > > > > > > > > (rev
> > > > > > > > > > > > 02)
> > > > > > > > > > > > ------------------------------------------------
> > > > > > > > > > > >  with USB and bridge devices not displayed.
> > > > > > > > > > > >
> > > > > > > > > > > >  If your modem is connected by an external serial cable,
> > > > > > > > > > > >  or mounted internally on an ISA card, scanModem would 
> > > > > > > > > > > > not access
> > > > > > > > > > > > it.
> > > > > > > > > > > >  Try with Root permission
> > > > > > > > > > > >  $ sudo wvdialconf  /etc/wvdial.conf
> > > > > > > > > > > >  to detect these modem types and some USB modems.
> > > > > > > > > > > >  If the detection is successful, read the 
> > > > > > > > > > > > DOCs/wvdial.txt .
> > > > > > > > > > > >  Edit the /etc/wvdial.conf with Root permission:
> > > > > > > > > > > >   sudo  gedit  /etc/wvdial.conf
> > > > > > > > > > > >  will be able to dial out with Root permission:
> > > > > > > > > > > >   sudo wvdial
> > > > > > > > > > > >
> > > > > > > > > > > >  Many modems for which scanModem fails have Conexant 
> > > > > > > > > > > > chips.
> > > > > > > > > > > >  From http://www.linuxant.com/drivers/modemident.php
> > > > > > > > > > > >  get the ListModem tool, which will report on Conexant 
> > > > > > > > > > > > chipset
> > > > > > > > > > > > modems
> > > > > > > > > > > >
> > > > > > > > > > > >  If the above tests fail, please provide any independent
> > > > > > > > > > > > information
> > > > > > > > > > > > available on your modem.
> > > > > > > > > > > >  If an alternative boot into Microsoft windows can be 
> > > > > > > > > > > > done, do
> > > > > > > > > > > > mouse
> > > > > > > > > > > > clicks on:
> > > > > > > > > > > >  Start > Settings > Control Panel > Classical View (for 
> > > > > > > > > > > > Window
> > > > > > > > > > > > XP)
> > > > > > > > > > > > >
> > > > > > > > > > > > System
> > > > > > > > > > > > > Hardware > Device Manager > Modems > Click on the + > 
> > > > > > > > > > > > > Modem.
> > > > > > > > > > > > > Double
> > > > > > > > > > > > > click
> > > > > > > > > > > > > to
> > > > > > > > > > > >
> > > > > > > > > > > > expand the graphic. Manufacturer information may be 
> > > > > > > > > > > > displayed.
> > > > > > > > > > > > For
> > > > > > > > > > > > example,
> > > > > > > > > > > > CXT
> > > > > > > > > > > > stands for Conexant. Click the Diagnostics Tab. Record 
> > > > > > > > > > > > any
> > > > > > > > > > > > hardware
> > > > > > > > > > > > ID
> > > > > > > > > > > > or
> > > > > > > > > > > > vendor
> > > > > > > > > > > > and device information. From the Driver Details TAB, 
> > > > > > > > > > > > copy out the
> > > > > > > > > > > > VENdor
> > > > > > > > > > > > and
> > > > > > > > > > > > DEVice information.
> > > > > > > > > > > > Next do the Query Modem and record the ATI 
> > > > > > > > > > > > specifications
> > > > > > > > > > > > displayed
> > > > > > > > > > > > such
> > > > > > > > > > > > as:
> > > > > > > > > > > >  ATI3 - Agere SoftModem Version 2.1.22
> > > > > > > > > > > >  ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
> > > > > > > > > > > > Try to identify the modem setup file, with name perhaps
> > > > > > > > > > > > MODEM.INF.
> > > > > > > > > > > > If may contain chipset Vendor informaton.
> > > > > > > > > > > >
> > > > > > > > > > > >  The /proc/asound/ audio+modem diagostics are being 
> > > > > > > > > > > > copied.
> > > > > > > > > > > >  Finished copy to Modem/ALSAroot.tgz
> > > > > > > > > > > >
> > > > > > > > > > > > Predictive diagnostics for card in bus 00:1b.0:
> > > > > > > > > > > >   Modem chipset not detected on
> > > > > > > > > > > > NAME="Audio device: Intel Corporation 82801H "
> > > > > > > > > > > > CLASS=0403
> > > > > > > > > > > > PCIDEV=8086:284b
> > > > > > > > > > > > SUBSYS=1462:3fe9
> > > > > > > > > > > > IRQ=21
> > > > > > > > > > > > HDA=8086:284b
> > > > > > > > > > > > SOFT=8086:284b.HDA
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >  High Definition Audio (HDA) cards MAY host a modem chip 
> > > > > > > > > > > > in their
> > > > > > > > > > > > Subsystem,
> > > > > > > > > > > >  and many are supported by the ALSA audio+modem driver
> > > > > > > > > > > > snd-hda-intel
> > > > > > > > > > > >  A modem was not detected on HDA card 8086:284b.
> > > > > > > > > > > >  If another modem card is present, then most likely 
> > > > > > > > > > > > 8086:284b
> > > > > > > > > > > > does
> > > > > > > > > > > > not
> > > > > > > > > > > > host
> > > > > > > > > > > > a modem.
> > > > > > > > > > > >  If another modem card has not been detected, then 
> > > > > > > > > > > > possibilities
> > > > > > > > > > > > are:
> > > > > > > > > > > >   1) A Conexant modem chip is present on 8086:284b, as 
> > > > > > > > > > > > Conexant
> > > > > > > > > > > > chips
> > > > > > > > > > > >  are frequently not detectable by ALSA diagnostics
> > > > > > > > > > > >   2) The modem may be of the older non-PCI Controller 
> > > > > > > > > > > > Chipset
> > > > > > > > > > > > (hardware) type.
> > > > > > > > > > > > Try detection with Root permission:
> > > > > > > > > > > >   sudo wvdialconf  /etc/wvdial.conf
> > > > > > > > > > > >
> > > > > > > > > > > >  For candidate modem in:  00:1b.0
> > > > > > > > > > > >  0403 Audio device: Intel Corporation 82801H
> > > > > > > > > > > >  Primary device ID:  8086:284b
> > > > > > > > > > > >  Subsystem PCI_id  1462:3fe9
> > > > > > > > > > > >  Softmodem codec or chipset from diagnostics:
> > > > > > > > > > > >                          from    Archives:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Support type needed or chipset:
> > > > > > > > > > > >
> > > > > > > > > > > > Support can likely be achieved through two mutually 
> > > > > > > > > > > > exclusive
> > > > > > > > > > > > alternatives:
> > > > > > > > > > > > 1) The hsfmodem software for Conexant chipset modems: 
> > > > > > > > > > > > Read
> > > > > > > > > > > > DOCs/Conexant.txt
> > > > > > > > > > > > The following ALSA alternative CANNOT work with Conexant 
> > > > > > > > > > > > modems.
> > > > > > > > > > > >
> > > > > > > > > > > > 2) An ALSA modem driver plus slmodemd.  Read 
> > > > > > > > > > > > DOCs/Smartlink.txt
> > > > > > > > > > > > for
> > > > > > > > > > > > details,
> > > > > > > > > > > > and
> > > > > > > > > > > > to test get the package SLMODEMD.gcc4.2.tar.gz from:
> > > > > > > > > > > >   http://linmodems.technion.ac.il/packages/smartlink/
> > > > > > > > > > > >
> > > > > > > > > > > > ----------------end Softmodem section --------------
> > > > > > > > > > > >
> > > > > > > > > > > > Writing DOCs/Intel.txt
> > > > > > > > > > > >
> > > > > > > > > > > > For owners of a Dell PCs with Conexant HSF modems, a 
> > > > > > > > > > > > driver
> > > > > > > > > > > > source
> > > > > > > > > > > > package
> > > > > > > > > > > > with full speed enabled is available, but requires 
> > > > > > > > > > > > driver
> > > > > > > > > > > > compiling.
> > > > > > > > > > > > Read
> > > > > > > > > > > > DOCs/Conexant.txt
> > > > > > > > > > > >
> > > > > > > > > > > >  From
> > > > > > > > > > > > http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> > > > > > > > > > > >  download
> > > > > > > > > > > > hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip
> > > > > > > > > > > >  Under Linux unpack with:
> > > > > > > > > > > >  $ unzip hsfmodem*.zip
> > > > > > > > > > > >  Then install with:
> > > > > > > > > > > >  $ sudo dpkg -i hsfmodem*.deb
> > > > > > > > > > > >  Subsequently, the modem should be found with
> > > > > > > > > > > >  $ sudo wvdialconf /etc/wvdial.conf
> > > > > > > > > > > >  Edit in your personal information with:
> > > > > > > > > > > >  $ sudo gedit /etc/wvdial.conf
> > > > > > > > > > > >  and try dialing out with:
> > > > > > > > > > > >  $ sudo wvdial.
> > > > > > > > > > > >  See DOCs/Testing.txt  for details.
> > > > > > > > > > > >  Read DOCs/Conexant.txt
> > > > > > > > > > > >
> > > > > > > > > > > > Writing DOCs/Conexant.txt
> > > > > > > > > > > >
> > > > > > > > > > > > Writing DOCs/Smartlink.txt
> > > > > > > > > > > > ============ end Smartlink section =====================
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >  The base of the UDEV device file system is: /dev/.udev
> > > > > > > > > > > >
> > > > > > > > > > > >  Versions adequately match for the compiler installed: 
> > > > > > > > > > > > 4.2.3
> > > > > > > > > > > >        and the compiler used in kernel assembly: 4.2.3
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >  Minimal compiling resources appear complete:
> > > > > > > > > > > >  make utility - /usr/bin/make
> > > > > > > > > > > >  Compiler version 4.2
> > > > > > > > > > > >  linuc_headers base folder 
> > > > > > > > > > > > /lib/modules/2.6.24-18-generic/build
> > > > > > > > > > > >
> > > > > > > > > > > >  However some compilations and executable functions may 
> > > > > > > > > > > > need
> > > > > > > > > > > > additional
> > > > > > > > > > > > files,
> > > > > > > > > > > >  in the FileNames.h (so called kernel "h"eaders) 
> > > > > > > > > > > > collection
> > > > > > > > > > > > installed
> > > > > > > > > > > > in
> > > > > > > > > > > >  /usr/include/ .
> > > > > > > > > > > >  For martian_modem, additional required packages are 
> > > > > > > > > > > > libc6-dev
> > > > > > > > > > > > (and
> > > > > > > > > > > > for
> > > > > > > > > > > > Debian/Ubuntu,
> > > > > > > > > > > >  linux-libc-dev). The also required headers of package 
> > > > > > > > > > > > libc6 are
> > > > > > > > > > > > commonly
> > > > > > > > > > > > installed by default.
> > > > > > > > > > > >  Compiling hsfmodem drivers does require linux-libc-dev 
> > > > > > > > > > > > and
> > > > > > > > > > > > libc6-dev
> > > > > > > > > > > > packages, for kernels 2.6.24 and later versions.
> > > > > > > > > > > >  In not included on your install CD, search for them at
> > > > > > > > > > > > http://packages.ubuntu.com
> > > > > > > > > > > >  or comparable Repository for other Linux distros.
> > > > > > > > > > > >  When compiling ALSA drivers, the utility "patch" will 
> > > > > > > > > > > > also be
> > > > > > > > > > > > needed.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > If a driver compilation fails, with message including 
> > > > > > > > > > > > some lack
> > > > > > > > > > > > of
> > > > > > > > > > > > some
> > > > > > > > > > > > FileName.h (stdio.h for example), then
> > > > > > > > > > > > Some additional kernel-header files need installation to
> > > > > > > > > > > > /usr/include.
> > > > > > > > > > > > The
> > > > > > > > > > > > minimal additional packages are libc6-dev
> > > > > > > > > > > > and any of its dependents, under Ubuntu linux-libc-dev
> > > > > > > > > > > >
> > > > > > > > > > > > If an alternate ethernet connection is available,
> > > > > > > > > > > > $  apt-get update
> > > > > > > > > > > > $  apt-get -s install linux-kernel-devel
> > > > > > > > > > > > will install needed packages.
> > > > > > > > > > > > For Debian/Ubuntu related distributions, run the 
> > > > > > > > > > > > following
> > > > > > > > > > > > command
> > > > > > > > > > > > to
> > > > > > > > > > > > display the needed package list:
> > > > > > > > > > > >
> > > > > > > > > > > > Otherwise packages have to be found through
> > > > > > > > > > > > http://packages.ubuntu.com
> > > > > > > > > > > > Once downloaded and transferred into a Linux partition,
> > > > > > > > > > > > they can be installed alltogether with:
> > > > > > > > > > > > $ sudo dpkg -i *.deb
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Checking pppd properties:
> > > > > > > > > > > >   -rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 
> > > > > > > > > > > > /usr/sbin/pppd
> > > > > > > > > > > >
> > > > > > > > > > > > In case of an "error 17" "serial loopback" problem, see:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >  http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
> > > > > > > > > > > >
> > > > > > > > > > > > To enable dialout without Root permission do:
> > > > > > > > > > > >   $ su - root  (not for Ubuntu)
> > > > > > > > > > > >   sudo chmod a+x /usr/sbin/pppd
> > > > > > > > > > > > or under Ubuntu related Linuxes
> > > > > > > > > > > >   sudo chmod a+x /usr/sbin/pppd
> > > > > > > > > > > >
> > > > > > > > > > > > Checking settings of:   /etc/ppp/options
> > > > > > > > > > > > asyncmap 0
> > > > > > > > > > > > noauth
> > > > > > > > > > > > crtscts
> > > > > > > > > > > > lock
> > > > > > > > > > > > hide-password
> > > > > > > > > > > > modem
> > > > > > > > > > > > proxyarp
> > > > > > > > > > > > lcp-echo-interval 30
> > > > > > > > > > > > lcp-echo-failure 4
> > > > > > > > > > > > noipx
> > > > > > > > > > > >
> > > > > > > > > > > > In case of a message like:
> > > > > > > > > > > >  Warning: Could not modify /etc/ppp/pap-secrets: 
> > > > > > > > > > > > Permission
> > > > > > > > > > > > denied
> > > > > > > > > > > > see
> > > > > > > > > > > >
> > > > > > > > > > > > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> > > > > > > > > > > >
> > > > > > > > > > > > Read Modem/DOCs/YourSystem.txt concerning other COMM 
> > > > > > > > > > > > channels:
> > > > > > > > > > > > eth0
> > > > > > > > > > > > Which can interfere with Browser naviagation.
> > > > > > > > > > > >
> > > > > > > > > > > >  Don't worry about the following, it is for experts 
> > > > > > > > > > > > should
> > > > > > > > > > > > trouble
> > > > > > > > > > > > shooting
> > > > > > > > > > > > be necessary.
> > > > > > > > > > > > ==========================================================
> > > > > > > > > > > >
> > > > > > > > > > > >  Checking for modem support lines:
> > > > > > > > > > > >  --------------------------------------
> > > > > > > > > > > >  /device/modem symbolic link:
> > > > > > > > > > > > slmodemd created symbolic link /dev/ttySL0:
> > > > > > > > > > > >  Within /etc/udev/ files:
> > > > > > > > > > > >
> > > > > > > > > > > >  Within /etc/modprobe.conf files:
> > > > > > > > > > > > /etc/modprobe.d/alsa-base:options snd-atiixp-modem 
> > > > > > > > > > > > index=-2
> > > > > > > > > > > > /etc/modprobe.d/alsa-base:options snd-via82xx-modem 
> > > > > > > > > > > > index=-2
> > > > > > > > > > > > /etc/modprobe.d/blacklist-modem:# Uncomment these 
> > > > > > > > > > > > entries in
> > > > > > > > > > > > order
> > > > > > > > > > > > to
> > > > > > > > > > > > blacklist unwanted modem drivers
> > > > > > > > > > > > /etc/modprobe.d/blacklist-modem:# blacklist 
> > > > > > > > > > > > snd-atiixp-modem
> > > > > > > > > > > > /etc/modprobe.d/blacklist-modem:# blacklist 
> > > > > > > > > > > > snd-via82xx-modem
> > > > > > > > > > > >  Within any ancient /etc/devfs files:
> > > > > > > > > > > >
> > > > > > > > > > > >  Within ancient kernel 2.4.n /etc/module.conf files:
> > > > > > > > > > > >
> > > > > > > > > > > > --------- end modem support lines --------
> > > > > > > > > > > > ---
> > > > > > > > > > > > Professional hosting for everyone - http://www.host.ru
> > > > > > > > > >
> > > > > > > > > > ---
> > > > > > > > > > Professional hosting for everyone - http://www.host.ru
> > > > > > > >
> > > > > > > > ---
> > > > > > > > Professional hosting for everyone - http://www.host.ru
> > > > > >
> > > > > > ---
> > > > > > Professional hosting for everyone - http://www.host.ru
> > > >
> > > > ---
> > > > Professional hosting for everyone - http://www.host.ru
> >
> > ---
> > Professional hosting for everyone - http://www.host.ru

---
Professional hosting for everyone - http://www.host.ru