Roan The ALSA version is read from the COMMAND: $ aplay --version with aplay itself includes in the alsa-utils package, This is separate from the alsa-drivers+alsa-lib update to 1.0.17 which you did, hence the 1.0.16 from /proc/asound/version. If you run scanModem again, I expect it will report 1.0.16 With respect to the continuing failure to detect the modem, please do $ cat /proc/interrupts >> roan.txt $ dmesg >> roan.txt and send us the roan.txt which will have the bootup diagnostics. They may reveal further resources that may we be able to free up. MarvS On Fri, Jul 18, 2008 at 5:36 AM, roan <roan@xxxxxxxx> wrote: > btw, command cat /proc/asound/version still gives 1.0.16 version, but > compiled today. but i compiled today 1.0.17 version > ---- > cat /proc/asound/version > Advanced Linux Sound Architecture Driver Version 1.0.16. > Compiled on Jun 18 2008 for kernel 2.6.24-19-generic (SMP). > ---- > and scanModem says even 1.0.15 version of ALSA > > > On Wed, 16 Jul 2008 19:38:20 -0400 > "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >> >> Roan, >> >> Follow >> Instructions for upgrading snd-hda-intel and its dependent driver set >> are at: http://linmodems.technion.ac.il/archive-seventh/msg00282.htm >> >> Upgrade to ALSA version 1.0.16. This has solved problems comparable >> to yours on other System. >> Reboot >> Recheck the >> $ cat /proc/asound/pcm >> >> MarvS >> >> On Wed, Jul 16, 2008 at 12:48 PM, roan <roan@xxxxxxxx> wrote: >>> >>> yes, audio is working >>> >>> >>> On Wed, 16 Jul 2008 10:55:58 -0400 >>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> Roan >>>> >>>> Is audio working >>>> >>>> MarvS >>>> >>>> On Wed, Jul 16, 2008 at 10:21 AM, roan <roan@xxxxxxxx> wrote: >>>>> >>>>> it seems that blacklisting didn't help >>>>> $ sudo cat /proc/asound/pcm still says the same: >>>>> --------------- >>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>> --------------- >>>>> >>>>> On Mon, 14 Jul 2008 08:06:10 -0400 >>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> >>>>>> Roan >>>>>> >>>>>> $ sudo cat /proc/asound/pcm >>>>>> The sudo probably isn't necessary. >>>>>> >>>>>> More later. Regulat job now >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx> wrote: >>>>>>> >>>>>>> first of all i can say that the modem is working with kernel 2.6.21 >>>>>>> but i didn't succeed to make it work under my 2.6.24-19 >>>>>>> downloaded agrsm-20080626.tar.gz >>>>>>> tried to make install, but it says that some needed files are >>>>>>> missing. >>>>>>> don't >>>>>>> know which ones :( >>>>>>> >>>>>>> on another hand i blacklisted this list of modules you sent me in >>>>>>> file >>>>>>> /etc/modeprobe.d/blacklist >>>>>>> ------ >>>>>>> scsi_mod >>>>>>> ehci_hcd >>>>>>> uhci_hcd >>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>> >>>>>>> shpchp 34452 0 >>>>>>> >>>>>>> pci_hotplug 30880 1 shpchp >>>>>>> >>>>>>> pcspkr 4224 0 >>>>>>> >>>>>>> sr_mod 17956 1 >>>>>>> >>>>>>> cdrom 37408 1 sr_mod >>>>>>> >>>>>>> sd_mod 30720 4 >>>>>>> >>>>>>> pcmcia_core >>>>>>> >>>>>>> uvcvideo 58116 0 >>>>>>> >>>>>>> iwl3945 89844 0 >>>>>>> >>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>> >>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>> >>>>>>> videodev 29440 1 uvcvideo >>>>>>> >>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>> >>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>> >>>>>>> video 19856 8 >>>>>>> >>>>>>> rfcomm 41744 2 >>>>>>> >>>>>>> l2cap 25728 13 rfcomm >>>>>>> >>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>> >>>>>>> snd_atiixp_modem 17672 0 >>>>>>> >>>>>>> snd_via82xx_modem 16392 0 >>>>>>> >>>>>>> snd_intel8x0m >>>>>>> ------ >>>>>>> but nothing changed: the $ /proc/asound/pcm still says "permission >>>>>>> denied" >>>>>>> or when i do it with sudo it says " no such file..." >>>>>>> >>>>>>> so please tell me what i need to do to make modem working on >>>>>>> 2.6.24-19 >>>>>>> kernel? >>>>>>> thx in advance >>>>>>> >>>>>>> >>>>>>> On Sat, 12 Jul 2008 09:41:01 -0400 >>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>> >>>>>>>> Bjorn, >>>>>>>> >>>>>>>> Would you please work with Roan, to get his >>>>>>>> CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc version 4.2 >>>>>>>> with >>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>> ---------- --------- --------- -------------- >>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: Intel >>>>>>>> Corporation 82801H >>>>>>>> having the 11c11040 Agere chip on Subsystem 1462:3fe9 >>>>>>>> >>>>>>>> Modem interrupt assignment and sharing: >>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, >>>>>>>> low) -> IRQ 21 >>>>>>>> [ 34.842316] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>>> 64 >>>>>>>> >>>>>>>> The ALSA verion is 1.0.15 >>>>>>>> >>>>>>>> The /proc/asound/pcm file reports: >>>>>>>> ----------------------- >>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>> --------------- >>>>>>>> but there is no expected Modem line, like >>>>>>>> 00-06: Something Modem >>>>>>>> so there is probably a resource conflict to be dealt with and/or an >>>>>>>> ALSA version upgradeto 1.0.16 may be necessary. >>>>>>>> >>>>>>>> Roan >>>>>>>> Detach any external devices which are not Essential (USB and PCMCIA >>>>>>>> etc.). >>>>>>>> or you can disable the usage through an edit in: >>>>>>>> $ sudo gedit /etc/discover.conf >>>>>>>> Of course you must retain ide and pci services >>>>>>>> >>>>>>>> You can also less globally blacklist non-essential modules, to free >>>>>>>> up >>>>>>>> resources. >>>>>>>> See >>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html >>>>>>>> on blacklisting guidance. >>>>>>>> Modules non essential on your System for dialup include: >>>>>>>> scsi_mod needed for USB drivers >>>>>>>> ehci_hcd USB2 >>>>>>>> uhci_hcd other USB >>>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>>> shpchp 34452 0 >>>>>>>> pci_hotplug 30880 1 shpchp >>>>>>>> pcspkr 4224 0 >>>>>>>> sr_mod 17956 1 >>>>>>>> cdrom 37408 1 sr_mod >>>>>>>> sd_mod 30720 4 >>>>>>>> pcmcia_core >>>>>>>> uvcvideo 58116 0 >>>>>>>> iwl3945 89844 0 >>>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>>> videodev 29440 1 uvcvideo >>>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>>> video 19856 8 >>>>>>>> rfcomm 41744 2 >>>>>>>> l2cap 25728 13 rfcomm >>>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>>> snd_atiixp_modem 17672 0 >>>>>>>> snd_via82xx_modem 16392 0 >>>>>>>> snd_intel8x0m modem driver also, not for your HDA system >>>>>>>> >>>>>>>> Then after a reboot, do >>>>>>>> $ /proc/asound/pcm >>>>>>>> to assess if a modem line is present. >>>>>>>> >>>>>>>> Another fast thing you can try is from >>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >>>>>>>> agrsm_howto.txt and the linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb >>>>>>>> which already includes agrmodem + agrserial drivers. Install with: >>>>>>>> $ sudo dpkg -i linux-image*.deb >>>>>>>> Then reboot under the new 2.6.21.0-22 kernel and run through the >>>>>>>> tests >>>>>>>> described in agrsm_howto.txt, except compiling & driver installation >>>>>>>> is already done. >>>>>>>> While lacking this modem hardware, >>>>>>>> linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not cause any >>>>>>>> problems on my otherwise Ubuntu system. It is Debian repackaging of >>>>>>>> the Fedora like kernel-2.6.21.0-22.i686.rpm , which I did. >>>>>>>> >>>>>>>> Joern will direct you with respect to further getting service under >>>>>>>> 2.6.24 kernels. >>>>>>>> The current Mandiva Linux release with 2.4.26 kernels does have a >>>>>>>> package >>>>>>>> dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm supporting the 11c11040 chip >>>>>>>> modem. >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>> >>>>>>>>> from the driver information i found out that the device is 1040 >>>>>>>>> there is ven=11c1 and dev=1040 >>>>>>>>> here is the info from lsmod and dmesg >>>>>>>>> ========== >>>>>>>>> Module Size Used by >>>>>>>>> arc4 2944 2 >>>>>>>>> ecb 4480 2 >>>>>>>>> blkcipher 8324 1 ecb >>>>>>>>> nls_iso8859_1 4992 1 >>>>>>>>> nls_cp437 6656 1 >>>>>>>>> isofs 36388 1 >>>>>>>>> vfat 14464 1 >>>>>>>>> fat 54556 1 vfat >>>>>>>>> udf 88612 0 >>>>>>>>> af_packet 23812 6 >>>>>>>>> rfcomm 41744 2 >>>>>>>>> l2cap 25728 13 rfcomm >>>>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>>>> ipv6 267780 14 >>>>>>>>> ppdev 10372 0 >>>>>>>>> snd_atiixp_modem 17672 0 >>>>>>>>> snd_via82xx_modem 16392 0 >>>>>>>>> snd_intel8x0m 19084 0 >>>>>>>>> snd_ac97_codec 101156 3 >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m >>>>>>>>> ac97_bus 3072 1 snd_ac97_codec >>>>>>>>> acpi_cpufreq 10796 1 >>>>>>>>> cpufreq_stats 7104 0 >>>>>>>>> cpufreq_conservative 8712 0 >>>>>>>>> cpufreq_ondemand 9740 1 >>>>>>>>> freq_table 5536 3 >>>>>>>>> acpi_cpufreq,cpufreq_stats,cpufreq_ondemand >>>>>>>>> cpufreq_userspace 5284 0 >>>>>>>>> cpufreq_powersave 2688 0 >>>>>>>>> sbs 15112 0 >>>>>>>>> sbshc 7680 1 sbs >>>>>>>>> container 5632 0 >>>>>>>>> dock 11280 0 >>>>>>>>> iptable_filter 3840 0 >>>>>>>>> ip_tables 14820 1 iptable_filter >>>>>>>>> x_tables 16132 1 ip_tables >>>>>>>>> coretemp 8448 0 >>>>>>>>> sbp2 24072 0 >>>>>>>>> parport_pc 36260 0 >>>>>>>>> lp 12324 0 >>>>>>>>> parport 37832 3 ppdev,parport_pc,lp >>>>>>>>> snd_hda_intel 351908 3 >>>>>>>>> snd_pcm_oss 42528 0 >>>>>>>>> snd_mixer_oss 18048 1 snd_pcm_oss >>>>>>>>> snd_pcm 78852 6 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss >>>>>>>>> snd_page_alloc 11656 5 >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm >>>>>>>>> snd_hwdep 10628 1 snd_hda_intel >>>>>>>>> joydev 13120 0 >>>>>>>>> mmc_block 14980 1 >>>>>>>>> snd_seq_dummy 4996 0 >>>>>>>>> pcmcia 40876 0 >>>>>>>>> snd_seq_oss 35456 0 >>>>>>>>> snd_seq_midi 9504 0 >>>>>>>>> snd_rawmidi 25888 1 snd_seq_midi >>>>>>>>> uvcvideo 58116 0 >>>>>>>>> iwl3945 89844 0 >>>>>>>>> snd_seq_midi_event 8576 2 snd_seq_oss,snd_seq_midi >>>>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>>>> snd_seq 54096 6 >>>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>>>>>>>> nvidia 7825536 36 >>>>>>>>> videodev 29440 1 uvcvideo >>>>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>>>> video 19856 8 >>>>>>>>> psmouse 40336 0 >>>>>>>>> ac 6916 0 >>>>>>>>> sdhci 19076 0 >>>>>>>>> battery 14212 0 >>>>>>>>> snd_timer 24964 2 snd_pcm,snd_seq >>>>>>>>> cfg80211 15112 1 iwlwifi_mac80211 >>>>>>>>> i2c_core 24832 1 nvidia >>>>>>>>> output 4736 1 video >>>>>>>>> serio_raw 7940 0 >>>>>>>>> mmc_core 51460 2 mmc_block,sdhci >>>>>>>>> snd_seq_device 9740 5 >>>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>>>>>>>> yenta_socket 27276 1 >>>>>>>>> rsrc_nonstatic 13696 1 yenta_socket >>>>>>>>> pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic >>>>>>>>> snd 56996 21 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>>>>>> evdev 13056 6 >>>>>>>>> button 9232 0 >>>>>>>>> iTCO_wdt 13092 0 >>>>>>>>> iTCO_vendor_support 4868 1 iTCO_wdt >>>>>>>>> intel_agp 25492 0 >>>>>>>>> agpgart 34760 2 nvidia,intel_agp >>>>>>>>> soundcore 8800 1 snd >>>>>>>>> shpchp 34452 0 >>>>>>>>> pci_hotplug 30880 1 shpchp >>>>>>>>> pcspkr 4224 0 >>>>>>>>> ext3 136712 1 >>>>>>>>> jbd 48404 1 ext3 >>>>>>>>> mbcache 9600 1 ext3 >>>>>>>>> sg 36880 0 >>>>>>>>> sr_mod 17956 1 >>>>>>>>> cdrom 37408 1 sr_mod >>>>>>>>> sd_mod 30720 4 >>>>>>>>> ata_generic 8324 0 >>>>>>>>> pata_acpi 8320 0 >>>>>>>>> usbhid 31872 0 >>>>>>>>> hid 38784 1 usbhid >>>>>>>>> ohci1394 33584 0 >>>>>>>>> ata_piix 19588 4 >>>>>>>>> ieee1394 93752 2 sbp2,ohci1394 >>>>>>>>> r8169 32900 0 >>>>>>>>> libata 159344 3 ata_generic,pata_acpi,ata_piix >>>>>>>>> scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata >>>>>>>>> ehci_hcd 37900 0 >>>>>>>>> uhci_hcd 27024 0 >>>>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>>>> thermal 16796 0 >>>>>>>>> processor 36872 4 acpi_cpufreq,thermal >>>>>>>>> fan 5636 0 >>>>>>>>> fuse 50580 5 >>>>>>>>> vesafb 8964 1 >>>>>>>>> fbcon 42912 72 >>>>>>>>> tileblit 3456 1 fbcon >>>>>>>>> font 9472 1 fbcon >>>>>>>>> bitblit 6784 1 fbcon >>>>>>>>> softcursor 3072 1 bitblit >>>>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>>>>>> [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) >>>>>>>>> (gcc >>>>>>>>> version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 >>>>>>>>> UTC >>>>>>>>> 2008 >>>>>>>>> (Ubuntu 2.6.24-18.32-generic) >>>>>>>>> [ 0.000000] BIOS-provided physical RAM map: >>>>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 >>>>>>>>> (usable) >>>>>>>>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 >>>>>>>>> (usable) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 >>>>>>>>> (ACPI >>>>>>>>> data) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 >>>>>>>>> (ACPI >>>>>>>>> NVS) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] 1151MB HIGHMEM available. >>>>>>>>> [ 0.000000] 896MB LOWMEM available. >>>>>>>>> [ 0.000000] found SMP MP-table at 000ff780 >>>>>>>>> [ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of >>>>>>>>> 256 >>>>>>>>> used >>>>>>>>> [ 0.000000] Zone PFN ranges: >>>>>>>>> [ 0.000000] DMA 0 -> 4096 >>>>>>>>> [ 0.000000] Normal 4096 -> 229376 >>>>>>>>> [ 0.000000] HighMem 229376 -> 524208 >>>>>>>>> [ 0.000000] Movable zone start PFN for each node >>>>>>>>> [ 0.000000] early_node_map[1] active PFN ranges >>>>>>>>> [ 0.000000] 0: 0 -> 524208 >>>>>>>>> [ 0.000000] On node 0 totalpages: 524208 >>>>>>>>> [ 0.000000] DMA zone: 32 pages used for memmap >>>>>>>>> [ 0.000000] DMA zone: 0 pages reserved >>>>>>>>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 >>>>>>>>> [ 0.000000] Normal zone: 1760 pages used for memmap >>>>>>>>> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 >>>>>>>>> [ 0.000000] HighMem zone: 2303 pages used for memmap >>>>>>>>> [ 0.000000] HighMem zone: 292529 pages, LIFO batch:31 >>>>>>>>> [ 0.000000] Movable zone: 0 pages used for memmap >>>>>>>>> [ 0.000000] DMI present. >>>>>>>>> [ 0.000000] ACPI: RSDP signature @ 0xC00F84A0 checksum 0 >>>>>>>>> [ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM) >>>>>>>>> [ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB MEGABOOK >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707 FACP1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636 M1636000 >>>>>>>>> 0 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 0.000000] ACPI: FACS 7FFBE000, 0040 >>>>>>>>> [ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707 APIC1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707 OEMMCFG >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB MEGABOOK >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707 OEMB1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707 OEMHPET >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef CpuPm 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x808 >>>>>>>>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>>>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>>>>>>> [ 0.000000] Processor #0 6:15 APIC version 20 >>>>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>>>>>>>> [ 0.000000] Processor #1 6:15 APIC version 20 >>>>>>>>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] >>>>>>>>> gsi_base[0]) >>>>>>>>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address >>>>>>>>> 0xfec00000, >>>>>>>>> GSI >>>>>>>>> 0-23 >>>>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >>>>>>>>> dfl) >>>>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>>>>>>>> level) >>>>>>>>> [ 0.000000] ACPI: IRQ0 used by override. >>>>>>>>> [ 0.000000] ACPI: IRQ2 used by override. >>>>>>>>> [ 0.000000] ACPI: IRQ9 used by override. >>>>>>>>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs >>>>>>>>> [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 >>>>>>>>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>>>>>>>> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: >>>>>>>>> 80000000:7ee00000) >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 000000000009f000 >>>>>>>>> - >>>>>>>>> 00000000000a0000 >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 00000000000a0000 >>>>>>>>> - >>>>>>>>> 00000000000e0000 >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 00000000000e0000 >>>>>>>>> - >>>>>>>>> 0000000000100000 >>>>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping >>>>>>>>> on. >>>>>>>>> Total >>>>>>>>> pages: 520113 >>>>>>>>> [ 0.000000] Kernel command line: >>>>>>>>> root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash vga=789 >>>>>>>>> quiet >>>>>>>>> [ 0.000000] mapped APIC to ffffb000 (fee00000) >>>>>>>>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) >>>>>>>>> [ 0.000000] Enabling fast FPU save and restore... done. >>>>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... >>>>>>>>> done. >>>>>>>>> [ 0.000000] Initializing CPU#0 >>>>>>>>> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 >>>>>>>>> bytes) >>>>>>>>> [ 0.000000] Detected 1795.565 MHz processor. >>>>>>>>> [ 24.138347] Console: colour dummy device 80x25 >>>>>>>>> [ 24.138350] console [tty0] enabled >>>>>>>>> [ 24.138603] Dentry cache hash table entries: 131072 (order: 7, >>>>>>>>> 524288 >>>>>>>>> bytes) >>>>>>>>> [ 24.138876] Inode-cache hash table entries: 65536 (order: 6, >>>>>>>>> 262144 >>>>>>>>> bytes) >>>>>>>>> [ 24.226903] Memory: 2066816k/2096832k available (2176k kernel >>>>>>>>> code, >>>>>>>>> 28700k reserved, 1006k data, 368k init, 1179328k highmem) >>>>>>>>> [ 24.226909] virtual kernel memory layout: >>>>>>>>> [ 24.226910] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) >>>>>>>>> [ 24.226911] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>>>>>>>> [ 24.226912] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>>>>>>>> [ 24.226913] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>>>>>>>> [ 24.226914] .init : 0xc0421000 - 0xc047d000 ( 368 kB) >>>>>>>>> [ 24.226915] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) >>>>>>>>> [ 24.226916] .text : 0xc0100000 - 0xc03201f4 (2176 kB) >>>>>>>>> [ 24.226919] Checking if this processor honours the WP bit even >>>>>>>>> in >>>>>>>>> supervisor mode... Ok. >>>>>>>>> [ 24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1, >>>>>>>>> MinObjects=4, >>>>>>>>> CPUs=2, Nodes=1 >>>>>>>>> [ 24.227097] hpet clockevent registered >>>>>>>>> [ 24.307060] Calibrating delay using timer specific routine.. >>>>>>>>> 3595.17 >>>>>>>>> BogoMIPS (lpj=7190350) >>>>>>>>> [ 24.307082] Security Framework initialized >>>>>>>>> [ 24.307088] SELinux: Disabled at boot. >>>>>>>>> [ 24.307100] AppArmor: AppArmor initialized >>>>>>>>> [ 24.307103] Failure registering capabilities with primary >>>>>>>>> security >>>>>>>>> module. >>>>>>>>> [ 24.307111] Mount-cache hash table entries: 512 >>>>>>>>> [ 24.307223] Initializing cgroup subsys ns >>>>>>>>> [ 24.307228] Initializing cgroup subsys cpuacct >>>>>>>>> [ 24.307237] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.307244] monitor/mwait feature present. >>>>>>>>> [ 24.307246] using mwait in idle threads. >>>>>>>>> [ 24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>>>> [ 24.307252] CPU: L2 cache: 2048K >>>>>>>>> [ 24.307254] CPU: Physical Processor ID: 0 >>>>>>>>> [ 24.307255] CPU: Processor Core ID: 0 >>>>>>>>> [ 24.307257] CPU: After all inits, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.307266] Compat vDSO mapped to ffffe000. >>>>>>>>> [ 24.307278] Checking 'hlt' instruction... OK. >>>>>>>>> [ 24.323404] SMP alternatives: switching to UP code >>>>>>>>> [ 24.324901] Early unpacking initramfs... done >>>>>>>>> [ 24.643306] ACPI: Core revision 20070126 >>>>>>>>> [ 24.643345] ACPI: Looking for DSDT in initramfs... error, file >>>>>>>>> /DSDT.aml >>>>>>>>> not found. >>>>>>>>> [ 24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>>>> stepping >>>>>>>>> 0d >>>>>>>>> [ 24.645818] SMP alternatives: switching to SMP code >>>>>>>>> [ 24.646454] Booting processor 1/1 eip 3000 >>>>>>>>> [ 24.656641] Initializing CPU#1 >>>>>>>>> [ 24.734815] Calibrating delay using timer specific routine.. >>>>>>>>> 3590.98 >>>>>>>>> BogoMIPS (lpj=7181974) >>>>>>>>> [ 24.734821] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.734826] monitor/mwait feature present. >>>>>>>>> [ 24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>>>> [ 24.734830] CPU: L2 cache: 2048K >>>>>>>>> [ 24.734832] CPU: Physical Processor ID: 0 >>>>>>>>> [ 24.734833] CPU: Processor Core ID: 1 >>>>>>>>> [ 24.734835] CPU: After all inits, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>>>> stepping >>>>>>>>> 0d >>>>>>>>> [ 24.735413] Total of 2 processors activated (7186.16 BogoMIPS). >>>>>>>>> [ 24.735588] ENABLING IO-APIC IRQs >>>>>>>>> [ 24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>>>>>>> [ 24.882841] checking TSC synchronization [CPU#0 -> CPU#1]: >>>>>>>>> passed. >>>>>>>>> [ 24.902845] Brought up 2 CPUs >>>>>>>>> [ 24.902867] CPU0 attaching sched-domain: >>>>>>>>> [ 24.902869] domain 0: span 03 >>>>>>>>> [ 24.902871] groups: 01 02 >>>>>>>>> [ 24.902874] CPU1 attaching sched-domain: >>>>>>>>> [ 24.902875] domain 0: span 03 >>>>>>>>> [ 24.902877] groups: 02 01 >>>>>>>>> [ 24.903074] net_namespace: 64 bytes >>>>>>>>> [ 24.903085] Booting paravirtualized kernel on bare hardware >>>>>>>>> [ 24.903524] Time: 14:55:42 Date: 07/12/08 >>>>>>>>> [ 24.903549] NET: Registered protocol family 16 >>>>>>>>> [ 24.903721] EISA bus registered >>>>>>>>> [ 24.903725] ACPI: bus type pci registered >>>>>>>>> [ 24.903966] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last >>>>>>>>> bus=6 >>>>>>>>> [ 24.903968] PCI: Using configuration type 1 >>>>>>>>> [ 24.903970] Setting up standard PCI resources >>>>>>>>> [ 24.912870] ACPI: EC: Look up EC in DSDT >>>>>>>>> [ 24.915987] ACPI: Interpreter enabled >>>>>>>>> [ 24.915990] ACPI: (supports S0 S1 S3 S4 S5) >>>>>>>>> [ 24.916005] ACPI: Using IOAPIC for interrupt routing >>>>>>>>> [ 24.916251] Error attaching device data >>>>>>>>> [ 24.916288] Error attaching device data >>>>>>>>> [ 24.918045] ACPI: EC: non-query interrupt received, switching to >>>>>>>>> interrupt mode >>>>>>>>> [ 24.922776] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, >>>>>>>>> data >>>>>>>>> = >>>>>>>>> 0x62 >>>>>>>>> [ 24.922779] ACPI: EC: driver started in interrupt mode >>>>>>>>> [ 24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>>>>>> [ 24.923832] PCI quirk: region 0800-087f claimed by ICH6 >>>>>>>>> ACPI/GPIO/TCO >>>>>>>>> [ 24.923836] PCI quirk: region 0500-053f claimed by ICH6 GPIO >>>>>>>>> [ 24.925529] PCI: Transparent bridge - 0000:00:1e.0 >>>>>>>>> [ 24.925622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>>>>>> [ 24.925751] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P2._PRT] >>>>>>>>> [ 24.925830] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P1._PRT] >>>>>>>>> [ 24.925930] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P7._PRT] >>>>>>>>> [ 24.926006] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P8._PRT] >>>>>>>>> [ 24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) *0, disabled. >>>>>>>>> [ 24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 >>>>>>>>> *11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) *0, disabled. >>>>>>>>> [ 24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938649] Linux Plug and Play Support v0.97 (c) Adam Belay >>>>>>>>> [ 24.938676] pnp: PnP ACPI init >>>>>>>>> [ 24.938683] ACPI: bus type pnp registered >>>>>>>>> [ 24.940724] pnp: PnP ACPI: found 13 devices >>>>>>>>> [ 24.940726] ACPI: ACPI bus type pnp unregistered >>>>>>>>> [ 24.940730] PnPBIOS: Disabled by ACPI PNP >>>>>>>>> [ 24.940928] PCI: Using ACPI for IRQ routing >>>>>>>>> [ 24.940931] PCI: If a device doesn't work, try "pci=routeirq". >>>>>>>>> If >>>>>>>>> it >>>>>>>>> helps, post a report >>>>>>>>> [ 24.994683] NET: Registered protocol family 8 >>>>>>>>> [ 24.994685] NET: Registered protocol family 20 >>>>>>>>> [ 24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>>>>>>>> [ 24.994720] hpet0: 3 64-bit timers, 14318180 Hz >>>>>>>>> [ 24.995752] AppArmor: AppArmor Filesystem Enabled >>>>>>>>> [ 24.998674] Time: tsc clocksource has been installed. >>>>>>>>> [ 24.998681] Switched to high resolution mode on CPU 0 >>>>>>>>> [ 24.998786] Switched to high resolution mode on CPU 1 >>>>>>>>> [ 25.014660] system 00:01: iomem range 0xfed14000-0xfed19fff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014670] system 00:08: ioport range 0x400-0x41f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014672] system 00:08: ioport range 0x4d0-0x4d1 has been >>>>>>>>> reserved >>>>>>>>> [ 25.014674] system 00:08: ioport range 0x800-0x87f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014677] system 00:08: ioport range 0x500-0x53f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014679] system 00:08: iomem range 0xfed1c000-0xfed1ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014682] system 00:08: iomem range 0xfed20000-0xfed3ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014684] system 00:08: iomem range 0xfed40000-0xfed8ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014690] system 00:0a: iomem range 0xfec00000-0xfec00fff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014693] system 00:0a: iomem range 0xfee00000-0xfee00fff >>>>>>>>> could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014698] system 00:0b: iomem range 0xe0000000-0xefffffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014703] system 00:0c: iomem range 0x0-0x9ffff could not be >>>>>>>>> reserved >>>>>>>>> [ 25.014706] system 00:0c: iomem range 0xc0000-0xcffff could not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014708] system 00:0c: iomem range 0xe0000-0xfffff could not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014711] system 00:0c: iomem range 0x100000-0x7fffffff could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014713] system 00:0c: iomem range 0xfed90000-0xffffffff >>>>>>>>> could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.045096] PCI: Bridge: 0000:00:01.0 >>>>>>>>> [ 25.045099] IO window: c000-cfff >>>>>>>>> [ 25.045102] MEM window: fa000000-fe0fffff >>>>>>>>> [ 25.045105] PREFETCH window: d0000000-dfffffff >>>>>>>>> [ 25.045109] PCI: Bridge: 0000:00:1c.0 >>>>>>>>> [ 25.045110] IO window: disabled. >>>>>>>>> [ 25.045116] MEM window: disabled. >>>>>>>>> [ 25.045120] PREFETCH window: disabled. >>>>>>>>> [ 25.045126] PCI: Bridge: 0000:00:1c.3 >>>>>>>>> [ 25.045127] IO window: disabled. >>>>>>>>> [ 25.045133] MEM window: fe100000-fe1fffff >>>>>>>>> [ 25.045137] PREFETCH window: disabled. >>>>>>>>> [ 25.045143] PCI: Bridge: 0000:00:1c.4 >>>>>>>>> [ 25.045145] IO window: d000-dfff >>>>>>>>> [ 25.045151] MEM window: fe200000-fe2fffff >>>>>>>>> [ 25.045156] PREFETCH window: disabled. >>>>>>>>> [ 25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0 >>>>>>>>> [ 25.045171] IO window: 0000e000-0000e0ff >>>>>>>>> [ 25.045175] IO window: 0000e400-0000e4ff >>>>>>>>> [ 25.045180] PREFETCH window: 88000000-8bffffff >>>>>>>>> [ 25.045185] MEM window: 8c000000-8fffffff >>>>>>>>> [ 25.045190] PCI: Bridge: 0000:00:1e.0 >>>>>>>>> [ 25.045193] IO window: e000-efff >>>>>>>>> [ 25.045199] MEM window: fe300000-febfffff >>>>>>>>> [ 25.045204] PREFETCH window: f7000000-f8ffffff >>>>>>>>> [ 25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045225] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045255] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 25.045285] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>>>> 64 >>>>>>>>> [ 25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045315] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>>>> 64 >>>>>>>>> [ 25.045329] PCI: Setting latency timer of device 0000:00:1e.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 25.045360] NET: Registered protocol family 2 >>>>>>>>> [ 25.082645] IP route cache hash table entries: 32768 (order: 5, >>>>>>>>> 131072 >>>>>>>>> bytes) >>>>>>>>> [ 25.082845] TCP established hash table entries: 131072 (order: >>>>>>>>> 8, >>>>>>>>> 1048576 >>>>>>>>> bytes) >>>>>>>>> [ 25.083237] TCP bind hash table entries: 65536 (order: 7, 524288 >>>>>>>>> bytes) >>>>>>>>> [ 25.083430] TCP: Hash tables configured (established 131072 bind >>>>>>>>> 65536) >>>>>>>>> [ 25.083432] TCP reno registered >>>>>>>>> [ 25.094708] checking if image is initramfs... it is >>>>>>>>> [ 25.722077] Freeing initrd memory: 7319k freed >>>>>>>>> [ 25.722788] audit: initializing netlink socket (disabled) >>>>>>>>> [ 25.722801] audit(1215874543.369:1): initialized >>>>>>>>> [ 25.722995] highmem bounce pool size: 64 pages >>>>>>>>> [ 25.724776] VFS: Disk quotas dquot_6.5.1 >>>>>>>>> [ 25.724842] Dquot-cache hash table entries: 1024 (order 0, 4096 >>>>>>>>> bytes) >>>>>>>>> [ 25.724962] io scheduler noop registered >>>>>>>>> [ 25.724964] io scheduler anticipatory registered >>>>>>>>> [ 25.724965] io scheduler deadline registered >>>>>>>>> [ 25.724978] io scheduler cfq registered (default) >>>>>>>>> [ 25.725110] Boot video device is 0000:01:00.0 >>>>>>>>> [ 25.725211] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.725249] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725279] Allocate Port Service[0000:00:01.0:pcie00] >>>>>>>>> [ 25.725312] Allocate Port Service[0000:00:01.0:pcie02] >>>>>>>>> [ 25.725388] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.725449] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725497] Allocate Port Service[0000:00:1c.0:pcie00] >>>>>>>>> [ 25.725526] Allocate Port Service[0000:00:1c.0:pcie02] >>>>>>>>> [ 25.725626] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>>>> 64 >>>>>>>>> [ 25.725687] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725734] Allocate Port Service[0000:00:1c.3:pcie00] >>>>>>>>> [ 25.725764] Allocate Port Service[0000:00:1c.3:pcie02] >>>>>>>>> [ 25.725864] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>>>> 64 >>>>>>>>> [ 25.725924] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725972] Allocate Port Service[0000:00:1c.4:pcie00] >>>>>>>>> [ 25.726003] Allocate Port Service[0000:00:1c.4:pcie02] >>>>>>>>> [ 25.726246] isapnp: Scanning for PnP cards... >>>>>>>>> [ 26.081376] isapnp: No Plug & Play device found >>>>>>>>> [ 26.104263] Real Time Clock Driver v1.12ac >>>>>>>>> [ 26.104422] hpet_resources: 0xfed00000 is busy >>>>>>>>> [ 26.104462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, >>>>>>>>> IRQ >>>>>>>>> sharing enabled >>>>>>>>> [ 26.105578] RAMDISK driver initialized: 16 RAM disks of 65536K >>>>>>>>> size >>>>>>>>> 1024 >>>>>>>>> blocksize >>>>>>>>> [ 26.105638] input: Macintosh mouse button emulation as >>>>>>>>> /devices/virtual/input/input0 >>>>>>>>> [ 26.105728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>>>>>>>> 0x60,0x64 >>>>>>>>> irq 1,12 >>>>>>>>> [ 26.106070] i8042.c: Detected active multiplexing controller, >>>>>>>>> rev >>>>>>>>> 1.1. >>>>>>>>> [ 26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>>>>>> [ 26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.134091] mice: PS/2 mouse device common for all mice >>>>>>>>> [ 26.134193] EISA: Probing bus 0 at eisa.0 >>>>>>>>> [ 26.134231] EISA: Detected 0 cards. >>>>>>>>> [ 26.134234] cpuidle: using governor ladder >>>>>>>>> [ 26.134235] cpuidle: using governor menu >>>>>>>>> [ 26.134311] NET: Registered protocol family 1 >>>>>>>>> [ 26.134336] Using IPI No-Shortcut mode >>>>>>>>> [ 26.134361] registered taskstats version 1 >>>>>>>>> [ 26.134462] Magic number: 0:283:940 >>>>>>>>> [ 26.134491] hash matches device ptyyb >>>>>>>>> [ 26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>>>>>>>> [ 26.134527] EDD information not available. >>>>>>>>> [ 26.134709] Freeing unused kernel memory: 368k freed >>>>>>>>> [ 26.137228] input: AT Translated Set 2 keyboard as >>>>>>>>> /devices/platform/i8042/serio0/input/input1 >>>>>>>>> [ 26.228218] vesafb: framebuffer at 0xfb000000, mapped to >>>>>>>>> 0xf8880000, >>>>>>>>> using 3750k, total 14336k >>>>>>>>> [ 26.228221] vesafb: mode is 800x600x32, linelength=3200, pages=1 >>>>>>>>> [ 26.228223] vesafb: protected mode interface info at c000:b230 >>>>>>>>> [ 26.228226] vesafb: pmi: set display start = c00cb293, set >>>>>>>>> palette >>>>>>>>> = >>>>>>>>> c00cb2ee >>>>>>>>> [ 26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 >>>>>>>>> 3c7 >>>>>>>>> 3c8 >>>>>>>>> 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da >>>>>>>>> [ 26.228240] vesafb: scrolling: redraw >>>>>>>>> [ 26.228242] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >>>>>>>>> [ 26.228336] Console: switching to colour frame buffer device >>>>>>>>> 100x37 >>>>>>>>> [ 26.257461] fb0: VESA VGA frame buffer device >>>>>>>>> [ 27.394531] fuse init (API version 7.9) >>>>>>>>> [ 27.413176] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef Cpu0Ist >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef Cpu0Cst >>>>>>>>> 3001 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.413641] Monitor-Mwait will be used to enter C-1 state >>>>>>>>> [ 27.413644] Monitor-Mwait will be used to enter C-2 state >>>>>>>>> [ 27.413646] Monitor-Mwait will be used to enter C-3 state >>>>>>>>> [ 27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>>>> [ 27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef Cpu1Ist >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef Cpu1Cst >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>>>> [ 27.416854] ACPI: Thermal Zone [THRM] (67 C) >>>>>>>>> [ 27.722830] usbcore: registered new interface driver usbfs >>>>>>>>> [ 27.722854] usbcore: registered new interface driver hub >>>>>>>>> [ 27.722880] usbcore: registered new device driver usb >>>>>>>>> [ 27.734151] USB Universal Host Controller Interface driver v3.0 >>>>>>>>> [ 27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 27.734213] PCI: Setting latency timer of device 0000:00:1a.0 to >>>>>>>>> 64 >>>>>>>>> [ 27.734217] uhci_hcd 0000:00:1a.0: UHCI Host Controller >>>>>>>>> [ 27.734416] uhci_hcd 0000:00:1a.0: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 1 >>>>>>>>> [ 27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 >>>>>>>>> [ 27.734574] usb usb1: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.734596] hub 1-0:1.0: USB hub found >>>>>>>>> [ 27.734600] hub 1-0:1.0: 2 ports detected >>>>>>>>> [ 27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 19 >>>>>>>>> [ 27.838155] PCI: Setting latency timer of device 0000:00:1a.1 to >>>>>>>>> 64 >>>>>>>>> [ 27.838160] uhci_hcd 0000:00:1a.1: UHCI Host Controller >>>>>>>>> [ 27.838183] uhci_hcd 0000:00:1a.1: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 2 >>>>>>>>> [ 27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b880 >>>>>>>>> [ 27.838318] usb usb2: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.838340] hub 2-0:1.0: USB hub found >>>>>>>>> [ 27.838345] hub 2-0:1.0: 2 ports detected >>>>>>>>> [ 27.845899] SCSI subsystem initialized >>>>>>>>> [ 27.864429] libata version 3.00 loaded. >>>>>>>>> [ 27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 20 >>>>>>>>> [ 27.942119] PCI: Setting latency timer of device 0000:00:1d.0 to >>>>>>>>> 64 >>>>>>>>> [ 27.942124] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>>>>>>>> [ 27.942146] uhci_hcd 0000:00:1d.0: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 3 >>>>>>>>> [ 27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b800 >>>>>>>>> [ 27.942286] usb usb3: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.942308] hub 3-0:1.0: USB hub found >>>>>>>>> [ 27.942313] hub 3-0:1.0: 2 ports detected >>>>>>>>> [ 28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 28.046055] PCI: Setting latency timer of device 0000:00:1d.1 to >>>>>>>>> 64 >>>>>>>>> [ 28.046059] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>>>>>>>> [ 28.046082] uhci_hcd 0000:00:1d.1: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 4 >>>>>>>>> [ 28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b480 >>>>>>>>> [ 28.046220] usb usb4: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.046242] hub 4-0:1.0: USB hub found >>>>>>>>> [ 28.046246] hub 4-0:1.0: 2 ports detected >>>>>>>>> [ 28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 28.152998] PCI: Setting latency timer of device 0000:00:1d.2 to >>>>>>>>> 64 >>>>>>>>> [ 28.153003] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>>>>>>>> [ 28.153025] uhci_hcd 0000:00:1d.2: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 5 >>>>>>>>> [ 28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b400 >>>>>>>>> [ 28.153166] usb usb5: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.153188] hub 5-0:1.0: USB hub found >>>>>>>>> [ 28.153192] hub 5-0:1.0: 2 ports detected >>>>>>>>> [ 28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 28.256978] PCI: Setting latency timer of device 0000:00:1a.7 to >>>>>>>>> 64 >>>>>>>>> [ 28.256982] ehci_hcd 0000:00:1a.7: EHCI Host Controller >>>>>>>>> [ 28.257007] ehci_hcd 0000:00:1a.7: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 6 >>>>>>>>> [ 28.260906] ehci_hcd 0000:00:1a.7: debug port 1 >>>>>>>>> [ 28.260913] PCI: cache line size of 32 is not supported by >>>>>>>>> device >>>>>>>>> 0000:00:1a.7 >>>>>>>>> [ 28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf9fffc00 >>>>>>>>> [ 28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, >>>>>>>>> driver >>>>>>>>> 10 >>>>>>>>> Dec 2004 >>>>>>>>> [ 28.273924] usb usb6: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.273948] hub 6-0:1.0: USB hub found >>>>>>>>> [ 28.273953] hub 6-0:1.0: 4 ports detected >>>>>>>>> [ 28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 20 >>>>>>>>> [ 28.377923] PCI: Setting latency timer of device 0000:00:1d.7 to >>>>>>>>> 64 >>>>>>>>> [ 28.377928] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>>>>>>>> [ 28.377961] ehci_hcd 0000:00:1d.7: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 7 >>>>>>>>> [ 28.381881] ehci_hcd 0000:00:1d.7: debug port 1 >>>>>>>>> [ 28.381887] PCI: cache line size of 32 is not supported by >>>>>>>>> device >>>>>>>>> 0000:00:1d.7 >>>>>>>>> [ 28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800 >>>>>>>>> [ 28.392765] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>>>> address >>>>>>>>> 2 >>>>>>>>> [ 28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, >>>>>>>>> driver >>>>>>>>> 10 >>>>>>>>> Dec 2004 >>>>>>>>> [ 28.400897] usb usb7: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.400919] hub 7-0:1.0: USB hub found >>>>>>>>> [ 28.400924] hub 7-0:1.0: 6 ports detected >>>>>>>>> [ 28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] >>>>>>>>> MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8] >>>>>>>>> [ 28.558719] r8169 Gigabit Ethernet driver 2.2LK loaded >>>>>>>>> [ 28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 28.558818] PCI: Setting latency timer of device 0000:04:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 28.559325] eth0: RTL8168b/8111b at 0xf8c44000, >>>>>>>>> 00:19:db:3b:be:ed, >>>>>>>>> XID >>>>>>>>> 38000000 IRQ 219 >>>>>>>>> [ 28.848496] Clocksource tsc unstable (delta = -3284221791 ns) >>>>>>>>> [ 28.852488] Time: hpet clocksource has been installed. >>>>>>>>> [ 28.881456] usb 7-5: new high speed USB device using ehci_hcd >>>>>>>>> and >>>>>>>>> address >>>>>>>>> 3 >>>>>>>>> [ 29.020706] usb 7-5: configuration #1 chosen from 1 choice >>>>>>>>> [ 29.178496] ata_piix 0000:00:1f.2: version 2.12 >>>>>>>>> [ 29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] >>>>>>>>> [ 29.186100] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>>>> address >>>>>>>>> 3 >>>>>>>>> [ 29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 29.200001] PCI: Setting latency timer of device 0000:00:1f.2 to >>>>>>>>> 64 >>>>>>>>> [ 29.200144] scsi0 : ata_piix >>>>>>>>> [ 29.200386] scsi1 : ata_piix >>>>>>>>> [ 29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma >>>>>>>>> 0xffa0 >>>>>>>>> irq >>>>>>>>> 14 >>>>>>>>> [ 29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma >>>>>>>>> 0xffa8 >>>>>>>>> irq >>>>>>>>> 15 >>>>>>>>> [ 29.213016] usb 4-2: configuration #1 chosen from 1 choice >>>>>>>>> [ 29.232150] usbcore: registered new interface driver hiddev >>>>>>>>> [ 29.237144] input: A4Tech PS/2+USB Mouse as >>>>>>>>> /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2 >>>>>>>>> [ 29.244652] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB >>>>>>>>> Mouse] >>>>>>>>> on >>>>>>>>> usb-0000:00:1d.1-2 >>>>>>>>> [ 29.244671] usbcore: registered new interface driver usbhid >>>>>>>>> [ 29.244676] >>>>>>>>> /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: >>>>>>>>> v2.6:USB HID core driver >>>>>>>>> [ 29.271950] ieee1394: Host added: ID:BUS[0-00:1023] >>>>>>>>> GUID[00dc10003a871c01] >>>>>>>>> [ 29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max >>>>>>>>> UDMA/133 >>>>>>>>> [ 29.297941] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ >>>>>>>>> (depth >>>>>>>>> 0/32) >>>>>>>>> [ 29.299183] ata1.00: configured for UDMA/133 >>>>>>>>> [ 29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, EX32, max >>>>>>>>> UDMA/33 >>>>>>>>> [ 29.363736] ata2.01: configured for UDMA/33 >>>>>>>>> [ 29.363918] scsi 0:0:0:0: Direct-Access ATA WDC >>>>>>>>> WD1600BEVS-0 >>>>>>>>> 04.0 >>>>>>>>> PQ: 0 ANSI: 5 >>>>>>>>> [ 29.364680] scsi 1:0:1:0: CD-ROM Optiarc DVD RW >>>>>>>>> AD-7530A >>>>>>>>> EX32 >>>>>>>>> PQ: 0 ANSI: 5 >>>>>>>>> [ 29.375749] Driver 'sd' needs updating - please use bus_type >>>>>>>>> methods >>>>>>>>> [ 29.375816] sd 0:0:0:0: [sda] 312581808 512-byte hardware >>>>>>>>> sectors >>>>>>>>> (160042 >>>>>>>>> MB) >>>>>>>>> [ 29.375827] sd 0:0:0:0: [sda] Write Protect is off >>>>>>>>> [ 29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>>>> [ 29.375845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>>>> enabled, >>>>>>>>> doesn't support DPO or FUA >>>>>>>>> [ 29.375891] sd 0:0:0:0: [sda] 312581808 512-byte hardware >>>>>>>>> sectors >>>>>>>>> (160042 >>>>>>>>> MB) >>>>>>>>> [ 29.375900] sd 0:0:0:0: [sda] Write Protect is off >>>>>>>>> [ 29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>>>> [ 29.375918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>>>> enabled, >>>>>>>>> doesn't support DPO or FUA >>>>>>>>> [ 29.375921] sda:<4>Driver 'sr' needs updating - please use >>>>>>>>> bus_type >>>>>>>>> methods >>>>>>>>> [ 29.416876] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > >>>>>>>>> [ 29.448097] sd 0:0:0:0: [sda] Attached SCSI disk >>>>>>>>> [ 29.451456] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >>>>>>>>> xa/form2 >>>>>>>>> cdda tray >>>>>>>>> [ 29.451460] Uniform CD-ROM driver Revision: 3.20 >>>>>>>>> [ 29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0 >>>>>>>>> [ 29.453330] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>>>>>>> [ 29.453348] sr 1:0:1:0: Attached scsi generic sg1 type 5 >>>>>>>>> [ 29.984062] Attempting manual resume >>>>>>>>> [ 29.984065] swsusp: Resume From Partition 8:5 >>>>>>>>> [ 29.984067] PM: Checking swsusp image. >>>>>>>>> [ 29.984307] PM: Resume from disk failed. >>>>>>>>> [ 30.020273] kjournald starting. Commit interval 5 seconds >>>>>>>>> [ 30.020310] EXT3-fs: mounted filesystem with ordered data mode. >>>>>>>>> [ 39.106307] input: PC Speaker as >>>>>>>>> /devices/platform/pcspkr/input/input3 >>>>>>>>> [ 39.182164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>>>>>>> [ 39.214162] shpchp: Standard Hot Plug PCI Controller Driver >>>>>>>>> version: >>>>>>>>> 0.4 >>>>>>>>> [ 39.314029] Linux agpgart interface v0.102 >>>>>>>>> [ 39.344769] iTCO_vendor_support: vendor-support=0 >>>>>>>>> [ 39.356145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 >>>>>>>>> (26-Jul-2007) >>>>>>>>> [ 39.356213] iTCO_wdt: Found a ICH8M TCO device (Version=2, >>>>>>>>> TCOBASE=0x0860) >>>>>>>>> [ 39.356253] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>>>>>>>> [ 39.376103] input: Power Button (FF) as >>>>>>>>> /devices/virtual/input/input4 >>>>>>>>> [ 39.397945] ACPI: Power Button (FF) [PWRF] >>>>>>>>> [ 39.398024] input: Lid Switch as /devices/virtual/input/input5 >>>>>>>>> [ 39.398442] ACPI: Lid Switch [LID0] >>>>>>>>> [ 39.398525] input: Power Button (CM) as >>>>>>>>> /devices/virtual/input/input6 >>>>>>>>> [ 39.420942] ACPI: Power Button (CM) [PWRB] >>>>>>>>> [ 40.062138] Yenta: CardBus bridge found at 0000:05:04.0 >>>>>>>>> [1462:3fe9] >>>>>>>>> [ 40.062165] Yenta O2: res at 0x94/0xD4: 00/ea >>>>>>>>> [ 40.062167] Yenta O2: enabling read prefetch/write burst >>>>>>>>> [ 40.190436] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 >>>>>>>>> [ 40.190441] Socket status: 30000006 >>>>>>>>> [ 40.190443] Yenta: Raising subordinate bus# of parent bus (#05) >>>>>>>>> from >>>>>>>>> #06 >>>>>>>>> to #09 >>>>>>>>> [ 40.190448] pcmcia: parent PCI bridge I/O window: 0xe000 - >>>>>>>>> 0xefff >>>>>>>>> [ 40.190450] cs: IO port probe 0xe000-0xefff: clean. >>>>>>>>> [ 40.190687] pcmcia: parent PCI bridge Memory window: 0xfe300000 >>>>>>>>> - >>>>>>>>> 0xfebfffff >>>>>>>>> [ 40.190689] pcmcia: parent PCI bridge Memory window: 0xf7000000 >>>>>>>>> - >>>>>>>>> 0xf8ffffff >>>>>>>>> [ 40.509499] ACPI: Battery Slot [BAT1] (battery absent) >>>>>>>>> [ 40.525446] sdhci: Secure Digital Host Controller Interface >>>>>>>>> driver >>>>>>>>> [ 40.525449] sdhci: Copyright(c) Pierre Ossman >>>>>>>>> [ 40.525490] sdhci: SDHCI controller found at 0000:05:04.2 >>>>>>>>> [1217:7120] >>>>>>>>> (rev 2) >>>>>>>>> [ 40.525517] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 40.525535] sdhci:slot0: Unknown controller version (2). You may >>>>>>>>> experience problems. >>>>>>>>> [ 40.525590] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA >>>>>>>>> [ 40.530106] ACPI: AC Adapter [ADP1] (on-line) >>>>>>>>> [ 40.584449] input: Video Bus as >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 >>>>>>>>> [ 40.626708] mmc0: new high speed SD card at address b368 >>>>>>>>> [ 40.626724] Linux video capture interface: v2.00 >>>>>>>>> [ 40.633956] ACPI: Video Device [NVGA] (multi-head: yes rom: no >>>>>>>>> post: >>>>>>>>> no) >>>>>>>>> [ 40.650802] nvidia: module license 'NVIDIA' taints kernel. >>>>>>>>> [ 40.905503] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 40.905517] PCI: Setting latency timer of device 0000:01:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 40.905638] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 >>>>>>>>> Thu >>>>>>>>> Feb >>>>>>>>> 14 17:53:07 PST 2008 >>>>>>>>> [ 41.107933] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network >>>>>>>>> Connection >>>>>>>>> driver for Linux, 1.2.0 >>>>>>>>> [ 41.107937] iwl3945: Copyright(c) 2003-2007 Intel Corporation >>>>>>>>> [ 41.108046] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 41.108067] PCI: Setting latency timer of device 0000:03:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 41.108094] iwl3945: Detected Intel PRO/Wireless 3945ABG Network >>>>>>>>> Connection >>>>>>>>> [ 41.113192] uvcvideo: Found UVC 1.00 device USB 2.0 Camera >>>>>>>>> (0c45:62c0) >>>>>>>>> [ 41.157982] usbcore: registered new interface driver uvcvideo >>>>>>>>> [ 41.157987] USB Video Class driver (v0.1.0) >>>>>>>>> [ 41.163654] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, >>>>>>>>> caps: >>>>>>>>> 0xa04713/0x10008 >>>>>>>>> [ 41.205402] input: SynPS/2 Synaptics TouchPad as >>>>>>>>> /devices/platform/i8042/serio4/input/input8 >>>>>>>>> [ 41.527140] mmcblk0: mmc0:b368 SMI 124160KiB >>>>>>>>> [ 41.527171] mmcblk0: unknown partition table >>>>>>>>> [ 41.548058] iwl3945: Radio Frequency Kill Switch is On: >>>>>>>>> [ 41.548060] Kill switch must be turned off for wireless >>>>>>>>> networking >>>>>>>>> to >>>>>>>>> work. >>>>>>>>> [ 41.552637] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.562730] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.582688] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.612899] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.632896] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a >>>>>>>>> channels >>>>>>>>> [ 41.673310] cs: IO port probe 0x100-0x3af: clean. >>>>>>>>> [ 41.675403] cs: IO port probe 0x3e0-0x4ff: clean. >>>>>>>>> [ 41.676206] cs: IO port probe 0x820-0x8ff: clean. >>>>>>>>> [ 41.676648] cs: IO port probe 0xc00-0xcf7: clean. >>>>>>>>> [ 41.677543] cs: IO port probe 0xa00-0xaff: clean. >>>>>>>>> [ 41.951205] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 19 >>>>>>>>> [ 41.951224] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>>>> 64 >>>>>>>>> [ 41.959807] hda_codec: Unknown model for ALC883, trying >>>>>>>>> auto-probe >>>>>>>>> from >>>>>>>>> BIOS... >>>>>>>>> [ 42.148966] lp: driver loaded but no devices found >>>>>>>>> [ 42.292437] Adding 4198396k swap on /dev/sda5. Priority:-1 >>>>>>>>> extents:1 >>>>>>>>> across:4198396k >>>>>>>>> [ 42.718838] EXT3 FS on sda6, internal journal >>>>>>>>> [ 43.959928] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>>>>> [ 44.382509] No dock devices found. >>>>>>>>> [ 46.545179] apm: BIOS not found. >>>>>>>>> [ 46.658069] ppdev: user-space parallel port driver >>>>>>>>> [ 46.791061] audit(1215863779.828:2): type=1503 >>>>>>>>> operation="inode_permission" requested_mask="a::" denied_mask="a::" >>>>>>>>> name="/dev/tty" pid=5516 profile="/usr/sbin/cupsd" >>>>>>>>> namespace="default" >>>>>>>>> [ 48.952388] NET: Registered protocol family 10 >>>>>>>>> [ 48.952852] lo: Disabled Privacy Extensions >>>>>>>>> [ 50.404479] Bluetooth: Core ver 2.11 >>>>>>>>> [ 50.404858] NET: Registered protocol family 31 >>>>>>>>> [ 50.404864] Bluetooth: HCI device and connection manager >>>>>>>>> initialized >>>>>>>>> [ 50.404871] Bluetooth: HCI socket layer initialized >>>>>>>>> [ 50.471186] Bluetooth: L2CAP ver 2.9 >>>>>>>>> [ 50.471195] Bluetooth: L2CAP socket layer initialized >>>>>>>>> [ 50.569202] Bluetooth: RFCOMM socket layer initialized >>>>>>>>> [ 50.569223] Bluetooth: RFCOMM TTY layer initialized >>>>>>>>> [ 50.569227] Bluetooth: RFCOMM ver 1.8 >>>>>>>>> [ 50.775034] r8169: eth0: link up >>>>>>>>> [ 52.174818] NET: Registered protocol family 17 >>>>>>>>> [ 65.454676] CPU0 attaching NULL sched-domain. >>>>>>>>> [ 65.454687] CPU1 attaching NULL sched-domain. >>>>>>>>> [ 65.459351] CPU0 attaching sched-domain: >>>>>>>>> [ 65.459362] domain 0: span 03 >>>>>>>>> [ 65.459367] groups: 01 02 >>>>>>>>> [ 65.459373] CPU1 attaching sched-domain: >>>>>>>>> [ 65.459377] domain 0: span 03 >>>>>>>>> [ 65.459380] groups: 02 01 >>>>>>>>> [ 73.153942] UDF-fs: No VRS found >>>>>>>>> [ 73.178375] ISO 9660 Extensions: Microsoft Joliet Level 3 >>>>>>>>> [ 73.389942] ISOFS: changing to secondary root >>>>>>>>> [ 76.466197] atkbd.c: Unknown key pressed (translated set 2, code >>>>>>>>> 0xf6 >>>>>>>>> on >>>>>>>>> isa0060/serio0). >>>>>>>>> [ 76.466209] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>>>> known. >>>>>>>>> [ 76.566510] atkbd.c: Unknown key released (translated set 2, >>>>>>>>> code >>>>>>>>> 0xf6 >>>>>>>>> on >>>>>>>>> isa0060/serio0). >>>>>>>>> [ 76.566519] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>>>> known. >>>>>>>>> [ 76.671452] wmaster0: Selected rate control algorithm >>>>>>>>> 'iwl-3945-rs' >>>>>>>>> [ 76.874415] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>>>> [ 81.572469] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>>>> [ 81.845751] r8169: eth0: link up >>>>>>>>> [ 92.756596] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>>>> [ 93.049381] r8169: eth0: link up >>>>>>>>> [ 97.659156] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.659168] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.661681] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.661690] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.662510] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.662518] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.671569] wlan0: RX authentication from 00:02:6f:45:59:71 >>>>>>>>> (alg=0 >>>>>>>>> transaction=2 status=0) >>>>>>>>> [ 97.671581] wlan0: authenticated >>>>>>>>> [ 97.671586] wlan0: associate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.674286] wlan0: authentication frame received from >>>>>>>>> 00:02:6f:45:59:71, >>>>>>>>> but not in authenticate state - ignored >>>>>>>>> [ 97.675732] wlan0: authentication frame received from >>>>>>>>> 00:02:6f:45:59:71, >>>>>>>>> but not in authenticate state - ignored >>>>>>>>> [ 97.679234] wlan0: RX AssocResp from 00:02:6f:45:59:71 >>>>>>>>> (capab=0x1 >>>>>>>>> status=0 aid=11) >>>>>>>>> [ 97.679245] wlan0: associated >>>>>>>>> [ 97.683747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>>>>>>>> [ 98.781032] wlan0: no IPv6 routers present >>>>>>>>> ========== >>>>>>>>> On Fri, 11 Jul 2008 08:12:41 -0400 >>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>> >>>>>>>>>> RE: modem is Agere Systems HDA Modem >>>>>>>>>> Roan from the Details tab of the Driver information, the Device >>>>>>>>>> information is needed >>>>>>>>>> 11C1 is the Agere Vendor designation, Likely the Device is either >>>>>>>>>> 1040 >>>>>>>>>> or 3026, which need entirely different support. >>>>>>>>>> >>>>>>>>>> Also please do >>>>>>>>>> $ lsmod >> roan.txt >>>>>>>>>> $ dmesg >> roan.txt >>>>>>>>>> and send us the roan.txt >>>>>>>>>> >>>>>>>>>> Is the Audio functioning? >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> On Fri, Jul 11, 2008 at 2:36 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> my modem is Agere Systems HDA Modem >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, 10 Jul 2008 17:59:04 -0400 >>>>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Roan, >>>>>>>>>>>> >>>>>>>>>>>> I presume your modem is internal and Not one of >>>>>>>>>>>> Attached USB devices: >>>>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>>>> ID 0c45:62c0 Microdia. >>>>>>>>>>>> >>>>>>>>>>>> Read the Softmodem.txt for instructions for doing modem >>>>>>>>>>>> diagnositcs >>>>>>>>>>>> under Microsoft. >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Jul 10, 2008 at 1:07 PM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> thx for an answer, Marvin >>>>>>>>>>>>> i did all as you said, but $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> now >>>>>>>>>>>>> says >>>>>>>>>>>>> this: >>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>> >>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>> >>>>>>>>>>>>> Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a >>>>>>>>>>>>> link >>>>>>>>>>>>> to >>>>>>>>>>>>> it. >>>>>>>>>>>>> Modem Port Scan<*1>: SHSF0 S0 S1 S2 S3 SHSF1 SHSF2 >>>>>>>>>>>>> SHSF3 >>>>>>>>>>>>> Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry, no modem was detected! Is it in use by another program? >>>>>>>>>>>>> Did you configure it properly with setserial? >>>>>>>>>>>>> >>>>>>>>>>>>> what alse should i do? >>>>>>>>>>>>> thx in advance >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, 10 Jul 2008 07:45:02 -0400 >>>>>>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Roan >>>>>>>>>>>>>> >>>>>>>>>>>>>> Your most likely situation is: >>>>>>>>>>>>>> >>>>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in >>>>>>>>>>>>>> their >>>>>>>>>>>>>> Subsystem, >>>>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>>>> does >>>>>>>>>>>>>> not >>>>>>>>>>>>>> host a modem. >>>>>>>>>>>>>> If another modem card has not been detected, then >>>>>>>>>>>>>> possibilities >>>>>>>>>>>>>> are: >>>>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>>>>>>>> chips >>>>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>>>> >>>>>>>>>>>>>> so try >>>>>>>>>>>>>> >>>>>>>>>>>>>> From >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>>>> download >>>>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>>>> Then install with: >>>>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>>>> >>>>>>>>>>>>>> Please report back after thus testing, >>>>>>>>>>>>>> >>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Jul 10, 2008 at 7:16 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Only plain text email is forwarded by the >>>>>>>>>>>>>>> Discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>> List >>>>>>>>>>>>>>> Server, >>>>>>>>>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>>>>>>>>>> YourName, YourCountry kernel 2.6.24-18-generic >>>>>>>>>>>>>>> With this Subject Line cogent experts will be alerted, and >>>>>>>>>>>>>>> useful >>>>>>>>>>>>>>> case >>>>>>>>>>>>>>> names left in the Archive. >>>>>>>>>>>>>>> YourCountry will enable Country specific guidance. Linux >>>>>>>>>>>>>>> experts >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> YourCountry >>>>>>>>>>>>>>> can be found through: >>>>>>>>>>>>>>> http://www.linux.org/groups/index.html. >>>>>>>>>>>>>>> They will know your Country's modem code, which may be >>>>>>>>>>>>>>> essential >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> dialup >>>>>>>>>>>>>>> service. >>>>>>>>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by >>>>>>>>>>>>>>> an >>>>>>>>>>>>>>> Internet >>>>>>>>>>>>>>> Provider mail filters. >>>>>>>>>>>>>>> So in a day, also check the Archived responses at >>>>>>>>>>>>>>> http://www.linmodems.org >>>>>>>>>>>>>>> -------------------------- System information >>>>>>>>>>>>>>> ---------------------------- >>>>>>>>>>>>>>> CPU=i686, >>>>>>>>>>>>>>> Linux version 2.6.24-18-generic (buildd@terranova) (gcc >>>>>>>>>>>>>>> version >>>>>>>>>>>>>>> 4.2.3 >>>>>>>>>>>>>>> (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 >>>>>>>>>>>>>>> scanModem update of: 2008_06_28 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* >>>>>>>>>>>>>>> files >>>>>>>>>>>>>>> Attached USB devices are: >>>>>>>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>>>>>>> ID 0c45:62c0 Microdia >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> USB modems not recognized >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For candidate card in slot 00:1b.0, firmware information and >>>>>>>>>>>>>>> bootup >>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: >>>>>>>>>>>>>>> Intel >>>>>>>>>>>>>>> Corporation 82801H >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, >>>>>>>>>>>>>>> HDA >>>>>>>>>>>>>>> Intel >>>>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>>>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>>>>>>>> (level, >>>>>>>>>>>>>>> low) >>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>> IRQ 21 >>>>>>>>>>>>>>> [ 34.842316] PCI: Setting latency timer of device >>>>>>>>>>>>>>> 0000:00:1b.0 >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics >>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for >>>>>>>>>>>>>>> some >>>>>>>>>>>>>>> modems. >>>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>>>> folders. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>>>>>>>>> The drivers are in the kernel modules tree at: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /lib/modules/2.6.24-18-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The ALSA verion is 1.0.15 >>>>>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>>>>>>>>>>>>> HDA Intel at 0xf9ff8000 irq 21 >>>>>>>>>>>>>>> === Finished firmware and bootup diagnostics, next deducing >>>>>>>>>>>>>>> cogent >>>>>>>>>>>>>>> software. >>>>>>>>>>>>>>> === >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> A candidate modem is not evident among the PCI devices: >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) >>>>>>>>>>>>>>> HD >>>>>>>>>>>>>>> Audio >>>>>>>>>>>>>>> Controller (rev 03) >>>>>>>>>>>>>>> 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM >>>>>>>>>>>>>>> (ICH8M/ICH8M-E) >>>>>>>>>>>>>>> SATA >>>>>>>>>>>>>>> IDE Controller (rev 03) >>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce >>>>>>>>>>>>>>> 8400M >>>>>>>>>>>>>>> G >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> a1) >>>>>>>>>>>>>>> 03:00.0 Network controller: Intel Corporation PRO/Wireless >>>>>>>>>>>>>>> 3945ABG >>>>>>>>>>>>>>> Network >>>>>>>>>>>>>>> Connection (rev 02) >>>>>>>>>>>>>>> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>>>>>>>>>>>>> RTL8111/8168B >>>>>>>>>>>>>>> PCI Express Gigabit Ethernet controller (rev 01) >>>>>>>>>>>>>>> 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD >>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> 02) >>>>>>>>>>>>>>> 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated >>>>>>>>>>>>>>> MS/xD >>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> (rev 01) >>>>>>>>>>>>>>> 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE >>>>>>>>>>>>>>> 1394) >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> 02) >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> with USB and bridge devices not displayed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If your modem is connected by an external serial cable, >>>>>>>>>>>>>>> or mounted internally on an ISA card, scanModem would not >>>>>>>>>>>>>>> access >>>>>>>>>>>>>>> it. >>>>>>>>>>>>>>> Try with Root permission >>>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> to detect these modem types and some USB modems. >>>>>>>>>>>>>>> If the detection is successful, read the DOCs/wvdial.txt . >>>>>>>>>>>>>>> Edit the /etc/wvdial.conf with Root permission: >>>>>>>>>>>>>>> sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>> will be able to dial out with Root permission: >>>>>>>>>>>>>>> sudo wvdial >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Many modems for which scanModem fails have Conexant chips. >>>>>>>>>>>>>>> From http://www.linuxant.com/drivers/modemident.php >>>>>>>>>>>>>>> get the ListModem tool, which will report on Conexant >>>>>>>>>>>>>>> chipset >>>>>>>>>>>>>>> modems >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If the above tests fail, please provide any independent >>>>>>>>>>>>>>> information >>>>>>>>>>>>>>> available on your modem. >>>>>>>>>>>>>>> If an alternative boot into Microsoft windows can be done, >>>>>>>>>>>>>>> do >>>>>>>>>>>>>>> mouse >>>>>>>>>>>>>>> clicks on: >>>>>>>>>>>>>>> Start > Settings > Control Panel > Classical View (for >>>>>>>>>>>>>>> Window >>>>>>>>>>>>>>> XP) >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> System >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>>>>>>>> Double >>>>>>>>>>>>>>>> click >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> expand the graphic. Manufacturer information may be >>>>>>>>>>>>>>> displayed. >>>>>>>>>>>>>>> For >>>>>>>>>>>>>>> example, >>>>>>>>>>>>>>> CXT >>>>>>>>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any >>>>>>>>>>>>>>> hardware >>>>>>>>>>>>>>> ID >>>>>>>>>>>>>>> or >>>>>>>>>>>>>>> vendor >>>>>>>>>>>>>>> and device information. From the Driver Details TAB, copy out >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> VENdor >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> DEVice information. >>>>>>>>>>>>>>> Next do the Query Modem and record the ATI specifications >>>>>>>>>>>>>>> displayed >>>>>>>>>>>>>>> such >>>>>>>>>>>>>>> as: >>>>>>>>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>>>>>>>> Try to identify the modem setup file, with name perhaps >>>>>>>>>>>>>>> MODEM.INF. >>>>>>>>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The /proc/asound/ audio+modem diagostics are being copied. >>>>>>>>>>>>>>> Finished copy to Modem/ALSAroot.tgz >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>>>>>>>>>>> Modem chipset not detected on >>>>>>>>>>>>>>> NAME="Audio device: Intel Corporation 82801H " >>>>>>>>>>>>>>> CLASS=0403 >>>>>>>>>>>>>>> PCIDEV=8086:284b >>>>>>>>>>>>>>> SUBSYS=1462:3fe9 >>>>>>>>>>>>>>> IRQ=21 >>>>>>>>>>>>>>> HDA=8086:284b >>>>>>>>>>>>>>> SOFT=8086:284b.HDA >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in >>>>>>>>>>>>>>> their >>>>>>>>>>>>>>> Subsystem, >>>>>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>>>>> does >>>>>>>>>>>>>>> not >>>>>>>>>>>>>>> host >>>>>>>>>>>>>>> a modem. >>>>>>>>>>>>>>> If another modem card has not been detected, then >>>>>>>>>>>>>>> possibilities >>>>>>>>>>>>>>> are: >>>>>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as >>>>>>>>>>>>>>> Conexant >>>>>>>>>>>>>>> chips >>>>>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>>>>> 2) The modem may be of the older non-PCI Controller Chipset >>>>>>>>>>>>>>> (hardware) type. >>>>>>>>>>>>>>> Try detection with Root permission: >>>>>>>>>>>>>>> sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For candidate modem in: 00:1b.0 >>>>>>>>>>>>>>> 0403 Audio device: Intel Corporation 82801H >>>>>>>>>>>>>>> Primary device ID: 8086:284b >>>>>>>>>>>>>>> Subsystem PCI_id 1462:3fe9 >>>>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>>>>>>>>>> from Archives: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Support type needed or chipset: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Support can likely be achieved through two mutually exclusive >>>>>>>>>>>>>>> alternatives: >>>>>>>>>>>>>>> 1) The hsfmodem software for Conexant chipset modems: Read >>>>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>>>> The following ALSA alternative CANNOT work with Conexant >>>>>>>>>>>>>>> modems. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2) An ALSA modem driver plus slmodemd. Read >>>>>>>>>>>>>>> DOCs/Smartlink.txt >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> details, >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> to test get the package SLMODEMD.gcc4.2.tar.gz from: >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Intel.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver >>>>>>>>>>>>>>> source >>>>>>>>>>>>>>> package >>>>>>>>>>>>>>> with full speed enabled is available, but requires driver >>>>>>>>>>>>>>> compiling. >>>>>>>>>>>>>>> Read >>>>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> From >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>>>>> download >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>>>>> Then install with: >>>>>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>>>>>>>> ============ end Smartlink section ===================== >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The base of the UDEV device file system is: /dev/.udev >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Versions adequately match for the compiler installed: 4.2.3 >>>>>>>>>>>>>>> and the compiler used in kernel assembly: 4.2.3 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Minimal compiling resources appear complete: >>>>>>>>>>>>>>> make utility - /usr/bin/make >>>>>>>>>>>>>>> Compiler version 4.2 >>>>>>>>>>>>>>> linuc_headers base folder >>>>>>>>>>>>>>> /lib/modules/2.6.24-18-generic/build >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> However some compilations and executable functions may need >>>>>>>>>>>>>>> additional >>>>>>>>>>>>>>> files, >>>>>>>>>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>>>>>>>>>>>> installed >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> /usr/include/ . >>>>>>>>>>>>>>> For martian_modem, additional required packages are >>>>>>>>>>>>>>> libc6-dev >>>>>>>>>>>>>>> (and >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> Debian/Ubuntu, >>>>>>>>>>>>>>> linux-libc-dev). The also required headers of package libc6 >>>>>>>>>>>>>>> are >>>>>>>>>>>>>>> commonly >>>>>>>>>>>>>>> installed by default. >>>>>>>>>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>>>>>>>>>>>> libc6-dev >>>>>>>>>>>>>>> packages, for kernels 2.6.24 and later versions. >>>>>>>>>>>>>>> In not included on your install CD, search for them at >>>>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>> or comparable Repository for other Linux distros. >>>>>>>>>>>>>>> When compiling ALSA drivers, the utility "patch" will also >>>>>>>>>>>>>>> be >>>>>>>>>>>>>>> needed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If a driver compilation fails, with message including some >>>>>>>>>>>>>>> lack >>>>>>>>>>>>>>> of >>>>>>>>>>>>>>> some >>>>>>>>>>>>>>> FileName.h (stdio.h for example), then >>>>>>>>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>>>>>>>> /usr/include. >>>>>>>>>>>>>>> The >>>>>>>>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If an alternate ethernet connection is available, >>>>>>>>>>>>>>> $ apt-get update >>>>>>>>>>>>>>> $ apt-get -s install linux-kernel-devel >>>>>>>>>>>>>>> will install needed packages. >>>>>>>>>>>>>>> For Debian/Ubuntu related distributions, run the following >>>>>>>>>>>>>>> command >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> display the needed package list: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Otherwise packages have to be found through >>>>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>> Once downloaded and transferred into a Linux partition, >>>>>>>>>>>>>>> they can be installed alltogether with: >>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking pppd properties: >>>>>>>>>>>>>>> -rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 /usr/sbin/pppd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In case of an "error 17" "serial loopback" problem, see: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> To enable dialout without Root permission do: >>>>>>>>>>>>>>> $ su - root (not for Ubuntu) >>>>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking settings of: /etc/ppp/options >>>>>>>>>>>>>>> asyncmap 0 >>>>>>>>>>>>>>> noauth >>>>>>>>>>>>>>> crtscts >>>>>>>>>>>>>>> lock >>>>>>>>>>>>>>> hide-password >>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>> proxyarp >>>>>>>>>>>>>>> lcp-echo-interval 30 >>>>>>>>>>>>>>> lcp-echo-failure 4 >>>>>>>>>>>>>>> noipx >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In case of a message like: >>>>>>>>>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission >>>>>>>>>>>>>>> denied >>>>>>>>>>>>>>> see >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM >>>>>>>>>>>>>>> channels: >>>>>>>>>>>>>>> eth0 >>>>>>>>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Don't worry about the following, it is for experts should >>>>>>>>>>>>>>> trouble >>>>>>>>>>>>>>> shooting >>>>>>>>>>>>>>> be necessary. >>>>>>>>>>>>>>> ========================================================== >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking for modem support lines: >>>>>>>>>>>>>>> -------------------------------------- >>>>>>>>>>>>>>> /device/modem symbolic link: >>>>>>>>>>>>>>> slmodemd created symbolic link /dev/ttySL0: >>>>>>>>>>>>>>> Within /etc/udev/ files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Within /etc/modprobe.conf files: >>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in >>>>>>>>>>>>>>> order >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> blacklist unwanted modem drivers >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>>>>>>>>>>>>>> Within any ancient /etc/devfs files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------- end modem support lines -------- >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> --- >>>>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>> >>>>>>>>> >>>>>>>>> --- >>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>> >>>>>>> >>>>>>> --- >>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>> >>>>> >>>>> --- >>>>> Professional hosting for everyone - http://www.host.ru >>>>> >>> >>> --- >>> Professional hosting for everyone - http://www.host.ru >>> > > --- > Professional hosting for everyone - http://www.host.ru >
