Thanks to all of you for helping me solve this problem.
I had tried Marvin's patched file, thanks Martin, but with same result.
Maybe I'm missing something in user space part. Detachment part cames
after starting martian userspace service.
dmesg|tail -f
-------
....
martian loaded - KMARTIAN_STAMP
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
"martian_dev": added device 11c1:440 BaseAddress = 0xa400, CommAddres =
0xa000, irq = 18
....
Till this moment everything looks good except IRQ serving part missing,
but if not wrong that part should go after starting user space app, so:
/etc/init.d/martian start
I'm getting
"martian_dev": martian_modem is detached
and from /var/log/messages:
Mar 14 22:37:32 galatea martian: error: Common area unrecognized, no
terminating signature
--------
Antonio, thanks for suggestion. I'm going to try scanmodem part. Well,
certainly before Monday ;)
Thanks to all you kind people for helping.
Antonio Olivares wrote:
There is an IRQ = 18, and an ACPI: PCI interrupt 0000:02:0a
error/message here, can you run scanModem and send it to determine if
it is the IRQ problem that is making martian_dev fail.
When I run dmesg from slax-6.0.2, I see
root@slax:~# dmesg
Linux version 2.6.24 (root@slax) (gcc version 4.2.3) #1 SMP Wed Feb 27
14:33:25 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009ff0000 (usable)
BIOS-e820: 0000000009ff0000 - 0000000009ff3000 (ACPI NVS)
BIOS-e820: 0000000009ff3000 - 000000000a000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
159MB LOWMEM available.
***** removed to save space and not needed for this message ****
martian loaded - KMARTIAN_STAMP
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10 (level,
low) -> IRQ 10
"martian_dev": added device 11c1:442 BaseAddress = 0xec00, CommAddres
= 0xe800, irq = 10
"martian_dev": serving irqs in module
"martian_dev": martian_modem is attached.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
So it might be the IRQ problem that is causing the martian_dev to
fail. I do not know for sure, but maybe Marv, Jacques, Stefan, or
Alexi can tell you what is happening. In principle the patches did
fix the issues for me, but in your case the IRQ is getting in the way
causing martian_dev to fail.
Hope this helps,
Antonio
On 3/13/08, Ivica Grujic <grujakg@xxxxxxxxx> wrote:
Antonio Olivares wrote:
On 3/11/08, grujakg <grujakg@xxxxxxxxx> wrote:
3.17 wrote:
grujakg wrote:
Stefan Puch-3 wrote:
...
The patch is attached this mail. Copy it into martian/kmodule and run
"patch -p0 < martian-patch-kernel-2.6.24.diff"
...
Got the same problem after updating to 2.6.24.3-12.fc8.
I've found same appropriate patch on nv forum, but after successful
build
and installation I'm receiving this martian errors:
...
kernel: martian loaded - KMARTIAN_STAMP
kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 18
kernel: "martian_dev": added device 11c1:440 BaseAddress = 0xa400,
CommAddres = 0xa000, irq = 18
martian: error: Common area unrecognized, no terminating signature
kernel: "martian_dev": martian_modem is detached
...
any suggestions, please.
thanks in advance
In addition to the problem solved by the patch mentioned above,
common->kstamp is messed up.
This very unclean patch should handle it.
--- modem/mport.c.orig 2008-03-10 17:50:03.000000000 +0000
+++ modem/mport.c 2008-03-10 17:47:29.000000000 +0000
@@ -319,6 +319,9 @@
0x0
);
+ strcpy (common->kstamp, "20061202\0");
+ strcpy (common->tsignature, "martiaN\0");
+
if (common == MAP_FAILED) {
LOGSYSERR (Error, "mmap");
LOGERR ("Failed to map device common data block\n");
Well, this doesn't work for me, same error...
I'll try to follow Chentsov'a tip, any help would be greatly appreciated.
Thanks
--
View this message in context:
http://www.nabble.com/Patch-for-kernel-version-2.6.24-tp15101327p15993332.html
Sent from the Linux Winmodem Support - Discussion mailing list archive at
Nabble.com.
Please post your error message. Many have complained that kernel
2.6.24.3-12.fc8. has broken many things, like eth0, wireless etc.
There are other kernels on koji, you might need to get a kernel from
there and kernel-devel as well and test it out. I have a Fedora 8
machine, but it is currently down. I would like to test it as well
and report back. I am having troubles with
slmodem-2.9.11-20080XYY.tar.gz package for slmodemd which supports
smartlink modems.
Regards,
Antonio
Sorry for inconvenience, the error messages are the same:
kernel: martian loaded - KMARTIAN_STAMP
kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 18
kernel: "martian_dev": added device 11c1:440 BaseAddress =
0xa400,CommAddres = 0xa000, irq = 18
martian: error: Common area unrecognized, no terminating signature
kernel: "martian_dev": martian_modem is detached
Regards
grujakg
