Marvin, Sorry for my don't attention. I change my .wvdial.conf and try with country, but don't work. I get debug log with: slmodemd -c BRAZIL --alsa hw:0,6 -d 3 2>slmodemd.log-* I attach this logs for you, in dmesg have any info: hda-intel: invalid format_val, rate=9600, ch=1, format=2 hda-intel: invalid format_val, rate=9600, ch=1, format=2 ... I don't know if logs can help, but hope. Thank you... []'s Alexandre Em Seg, 2007-06-18 às 14:01 -0400, Marvin Stodolsky escreveu: > Alex > > RE: > card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > ==> # slmodemd --alsa hw:0 > > The proper setup COMMAND is: > # slmodemd --alsa hw:0,6 > since the modem is subsdevice 6 on card 0 > > Follow Antonio's guidance and use wvdial, > except don't use > Stupid Mode = yes > unless essential. > > You may also have to use a country setting in the slmodemd command > # slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > with your country in the ouput of > $ slmodemd --countrylist > > MarvS > > > > On 6/18/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > > > > > > ----- Original Message ---- > > From: Alexandre Penasso Teixeira <alexandre@xxxxxxxxxxxxxxxxxxx> > > To: Linmodems <discuss@xxxxxxxxxxxxx> > > Sent: Monday, June 18, 2007 10:13:30 AM > > Subject: Modem Motorola HDA > > > > Hi developers, > > > > I have one modem sm56-hda, and build the new driver > > slmodem-2.9.11-2007050 and ungrab-winmodem-20070505 alsa on. > > make SUPPORT_ALSA=1 > > > > I build ok, but after load the slmodemd I don't dialing... look it. > > > > ==> # aplay -l > > **** List of PLAYBACK Hardware Devices **** > > card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] > > Subdevices: 0/1 > > Subdevice #0: subdevice #0 > > card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > > > ==> # slmodemd --alsa hw:0 > > SmartLink Soft Modem: version 2.9.11 Jun 18 2007 12:46:42 > > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > > modem `hw:0' created. TTY is `/dev/pts/1' > > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > > > ==> # minicom > > Welcome to minicom 2.1 > > > > OP+�+�ES: History Buffer, F-key Macros, Search History Buffer, I18n > > Compilado em Nov 4 2005, 18:10:30. > > > > Pressione CTRL-A Z para ajuda sobre teclas especiais > > > > AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0 > > OK > > atx3dt 225 > > NO CARRIER > > ERROR > > > > > > I have on phone-line running ok... with other notebook dialing ok... Are > > you have suggestions ? > > > > []'s > > Alexandre > > > > > > Could you try it out with wvdial? > > Add option Carrier check = no > > Your wvdial.conf file should look something like > > > > [olivares@localhost ~]$ cat /etc/wvdial.conf > > > > [Dialer Defaults] > > Modem = /dev/ttySL0 > > Baud = 460800 > > Init1 = ATZ > > #Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ISDN = 0 > > Modem Type = Analog Modem > > Carrier Check = no > > Stupid Mode = yes > > Auto DNS = yes > > Phone = your_phone_number > > Username = your_username > > Password = your_password > > > > Hope this helps, > > > > Antonio > > > > > > > > > > > > > > ____________________________________________________________________________________ > > Need a vacation? Get great deals > > to amazing places on Yahoo! Travel. > > http://travel.yahoo.com/ > >
<425.941021> SmartLink Soft Modem: version 2.9.11 Jun 18 2007 16:15:24 <425.942009> hw:0,6: startup modem... <425.943998> hw:0,6: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. modem `hw:0,6' created. TTY is `/dev/pts/1' <425.944574> open file: /var/lib/slmodem/data.hw:0,6... <425.945034> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <585.600327> main: termios changed. <585.622929> hw:0,6: update termios... <585.716339> main: termios changed. <585.716364> hw:0,6: update termios... <585.815171> hw:0,6: run cmd: ATX3 <585.815217> hw:0,6: modem report result: 0 (OK) <585.915263> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 <585.915309> hw:0,6: modem set mode: -> 0... <585.915318> hw:0,6: modem report result: 0 (OK) <586.015376> hw:0,6: run cmd: ATM1L3DT225 <586.015422> main: alsa_ioctl: cmd 8, arg 0... <586.015431> main: alsa_ioctl: cmd 8, arg 0... <586.015447> hw:0,6: modem dial: T225... <586.015454> hw:0,6: modem_dial_start... <586.015460> call: create... <586.015472> CallProgFP_Create >> <586.015479> APPLY_FILTER = 0 <586.015487> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <586.015495> ============> 0 <586.015501> Cadence: Busy Tone loose detection is 0 <586.015509> TYPE BUSY <586.015515> Filter index 0 <586.015520> Filter SubIndex 0 <586.015526> MAX_ON_TIME 40 Buffers MIN_ON_TIME 9 Buffers <586.015532> MAX_OFF_TIME 40 Buffers MIN_OFF_TIME 9 Buffers <586.015539> OFF_TIME_THAT_RESETS_CYCLE 120 <586.015545> BUFFER LENGTH 160 samples. <586.015551> INTEGRATION_LENGTH 0[ms] <586.015557> LEVEL 96 <586.015565> INTEGRATION_TIME = 0 Buffers. <586.015573> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <586.015580> TYPE DIAL <586.015586> Filter index 5 <586.015592> Filter SubIndex 0 <586.015597> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers <586.015603> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers <586.015609> OFF_TIME_THAT_RESETS_CYCLE 0 <586.015615> BUFFER LENGTH 666 samples. <586.015620> INTEGRATION_LENGTH 2500[ms] <586.015626> LEVEL 96 <586.015633> INTEGRATION_TIME = 28 Buffers. <586.015641> CALLPROG Create << <586.015647> CALLPROG Dialing T225 <586.015654> Configuration->tone_DigitLength 100 <586.015660> Configuration->pulse_OffHookTime 36 <586.015666> Configuration->pulse_OnHookTime 64 <586.015672> Configuration->dialPauseTime 2 <586.015678> Configuration->flashTime 50 <586.015684> Configuration->toneOrPulseFlag 0 <586.015690> Configuration->dialModifierValidationFlag 0 <586.015696> Configuration->ABCD_PermittedFlag 0 <586.015702> Configuration->pulseAndToneInSameStringPermittedFlag 0 <586.015708> Configuration->callingToneFlag 0 <586.015714> Configuration->commaPauseDurLimit 255 <586.015720> Configuration->digitPattern 1 <586.015726> Configuration->tone_BetweenDigitsInterval 100 <586.015732> Configuration->pulse_BetweenDigitsInterval 800 <586.015738> DTMF_Gain1 = 13014 <586.015743> DTMF_Gain2 = 16384 <586.015750> AnalyzeDialString: Updated 17 May 1999 00:50 <586.015756> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 3 <586.015762> Dial String Syntax is VALID <586.015774> GetNoAnswerTimeOut. 60 <586.015780> BlindCall: GetBlindDialPause = 2 . <586.015786> CALLPROG_Dial was exited. <586.015792> call: create RC: 9600 <-> 8000... <586.015801> hw:0,6: modem_start.. <586.015808> hw:0,6: modem set state: 1 --> 2... <586.015814> hw:0,6: new state: DP_ESTAB <586.015820> main: alsa_ioctl: cmd 8, arg 3... <586.015827> hw:0,6: modem set hook: 0 --> 1... <586.015833> main: alsa_ioctl: cmd 2, arg 1... <586.023109> main: alsa_ioctl: cmd 11, arg 0... <586.023210> main: alsa_ioctl: cmd 4, arg 2580... <586.023219> main: alsa_ioctl: cmd 7, arg 30... <586.023226> main: alsa_start... error: cannot setup hw params for playback: Invalid argument <586.023396> err: hw:0,6: modem start = -22: cannot start device. <586.023404> hw:0,6: modem_stop.. <586.023410> hw:0,6: modem set hook: 1 --> 0... <586.023417> main: alsa_ioctl: cmd 2, arg 0... <586.031096> main: alsa_ioctl: cmd 8, arg 0... <586.031129> call: delete... <586.031137> Dialer was aborted. <586.031167> CALLPROG_Delete is entered <586.031174> cadence_delete with CADENCE_DIAL_OBJ is invoked <586.031182> cadence_delete with CADENCE_OBJ is invoked <586.031188> CALLPROG_Delete is exited <586.031195> hw:0,6: modem set state: 2 --> 1... <586.031202> hw:0,6: new state: MODEM_IDLE <586.031209> hw:0,6: modem report result: 3 (NO CARRIER) <586.031226> hw:0,6: modem report result: 4 (ERROR) <586.348626> main: termios changed. <586.348658> hw:0,6: update termios... <586.348673> main: pty closed. <591.827972> main: signal 2: mark termination. <591.903741> hw:0,6: modem_delete...
<150.000609> SmartLink Soft Modem: version 2.9.11 Jun 18 2007 16:15:24 <150.001820> hw:0,6: startup modem... <150.002871> hw:0,6: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. modem `hw:0,6' created. TTY is `/dev/pts/1' <150.010601> open file: /var/lib/slmodem/data.hw:0,6... <150.016865> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <169.797191> main: termios changed. <169.797229> hw:0,6: update termios... <170.801491> hw:0,6: run cmd: ATS7=45S0=0L1V1X4&c1E1Q0 <170.801512> main: alsa_ioctl: cmd 8, arg 0... <170.801521> hw:0,6: modem report result: 0 (OK) <177.898371> hw:0,6: run cmd: ati7 <177.898943> hw:0,6: modem report result: 0 (OK) <187.131922> hw:0,6: run cmd: atdt225 <187.132463> hw:0,6: modem dial: t225... <187.132559> hw:0,6: modem_dial_start... <187.132654> call: create... <187.132781> CallProgFP_Create >> <187.132846> APPLY_FILTER = 0 <187.132941> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <187.133036> ============> 0 <187.133100> Cadence: Busy Tone loose detection is 0 <187.133195> TYPE BUSY <187.133355> Filter index 0 <187.133449> Filter SubIndex 0 <187.133513> MAX_ON_TIME 40 Buffers MIN_ON_TIME 9 Buffers <187.133578> MAX_OFF_TIME 40 Buffers MIN_OFF_TIME 9 Buffers <187.133642> OFF_TIME_THAT_RESETS_CYCLE 120 <187.133706> BUFFER LENGTH 160 samples. <187.133769> INTEGRATION_LENGTH 0[ms] <187.133833> LEVEL 96 <187.133929> INTEGRATION_TIME = 0 Buffers. <187.134024> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <187.134119> TYPE DIAL <187.134183> Filter index 5 <187.134247> Filter SubIndex 0 <187.134311> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers <187.134375> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers <187.134439> OFF_TIME_THAT_RESETS_CYCLE 0 <187.134503> BUFFER LENGTH 666 samples. <187.134567> INTEGRATION_LENGTH 2500[ms] <187.134631> LEVEL 96 <187.134725> INTEGRATION_TIME = 28 Buffers. <187.134820> CALLPROG Create << <187.134884> CALLPROG Dialing t225 <187.134949> Configuration->tone_DigitLength 100 <187.135013> Configuration->pulse_OffHookTime 36 <187.135077> Configuration->pulse_OnHookTime 64 <187.135141> Configuration->dialPauseTime 2 <187.135205> Configuration->flashTime 50 <187.135269> Configuration->toneOrPulseFlag 0 <187.135333> Configuration->dialModifierValidationFlag 0 <187.135397> Configuration->ABCD_PermittedFlag 0 <187.135461> Configuration->pulseAndToneInSameStringPermittedFlag 0 <187.135525> Configuration->callingToneFlag 0 <187.135589> Configuration->commaPauseDurLimit 255 <187.135653> Configuration->digitPattern 1 <187.135717> Configuration->tone_BetweenDigitsInterval 100 <187.135781> Configuration->pulse_BetweenDigitsInterval 800 <187.135845> DTMF_Gain1 = 13014 <187.135909> DTMF_Gain2 = 16384 <187.136003> AnalyzeDialString: Updated 17 May 1999 00:50 <187.136067> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 3 <187.136131> Dial String Syntax is VALID <187.136258> GetNoAnswerTimeOut. 45 <187.136323> WAIT DIAL TIMEOUT = 5 <187.136386> CALLPROG_Dial was exited. <187.136450> call: create RC: 9600 <-> 8000... <187.136546> hw:0,6: modem_start.. <187.136610> hw:0,6: modem set state: 1 --> 2... <187.136704> hw:0,6: new state: DP_ESTAB <187.136768> main: alsa_ioctl: cmd 8, arg 1... <187.136833> hw:0,6: modem set hook: 0 --> 1... <187.136897> main: alsa_ioctl: cmd 2, arg 1... <187.141585> main: alsa_ioctl: cmd 11, arg 0... <187.142476> main: alsa_ioctl: cmd 4, arg 2580... <187.142571> main: alsa_ioctl: cmd 7, arg 30... <187.142636> main: alsa_start... error: cannot setup hw params for playback: Invalid argument <187.202225> err: hw:0,6: modem start = -22: cannot start device. <187.202352> hw:0,6: modem_stop.. <187.202416> hw:0,6: modem set hook: 1 --> 0... <187.202481> main: alsa_ioctl: cmd 2, arg 0... <187.209519> main: alsa_ioctl: cmd 8, arg 0... <187.209743> call: delete... <187.209837> Dialer was aborted. <187.209900> CALLPROG_Delete is entered <187.209964> cadence_delete with CADENCE_DIAL_OBJ is invoked <187.210030> cadence_delete with CADENCE_OBJ is invoked <187.210124> CALLPROG_Delete is exited <187.210571> hw:0,6: modem set state: 2 --> 1... <187.210667> hw:0,6: new state: MODEM_IDLE <187.210761> hw:0,6: modem report result: 3 (NO CARRIER) <187.210921> hw:0,6: modem report result: 4 (ERROR) <190.910014> hw:0,6: run cmd: ATZ <190.910364> hw:0,6: modem reset... <190.910429> hw:0,6: modem set state: 1 --> 1... <190.910524> hw:0,6: modem set mode: -> 0... <190.910588> hw:0,6: modem report result: 0 (OK) <192.924577> main: termios changed. <192.924831> hw:0,6: update termios... <192.925021> main: pty closed. <195.557665> main: signal 2: mark termination. <195.558236> hw:0,6: modem_delete...
<388.089099> SmartLink Soft Modem: version 2.9.11 Jun 18 2007 16:15:24 <388.090278> hw:0,6: startup modem... <388.091360> hw:0,6: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. modem `hw:0,6' created. TTY is `/dev/pts/1' <388.098869> open file: /var/lib/slmodem/data.hw:0,6... <388.104878> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <390.745392> main: signal 2: mark termination. <390.746027> hw:0,6: modem_delete...
<413.329089> SmartLink Soft Modem: version 2.9.11 Jun 18 2007 16:15:24 <413.330140> hw:0,6: startup modem... <413.331380> hw:0,6: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. modem `hw:0,6' created. TTY is `/dev/pts/1' <413.336007> open file: /var/lib/slmodem/data.hw:0,6... <413.336463> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <416.782821> main: termios changed. <416.782849> hw:0,6: update termios... <416.906315> main: termios changed. <416.906328> hw:0,6: update termios... <416.906358> hw:0,6: run cmd: ATQ0V1E1 <416.906368> hw:0,6: modem report result: 0 (OK) <416.958336> hw:0,6: run cmd: ATQ0V1E1Z <416.958349> hw:0,6: modem reset... <416.958355> hw:0,6: modem set state: 1 --> 1... <416.958362> hw:0,6: modem set mode: -> 0... <416.958368> hw:0,6: modem report result: 0 (OK) <417.010339> hw:0,6: run cmd: ATQ0V1E1S0=0 <417.010353> hw:0,6: modem report result: 0 (OK) <417.062346> hw:0,6: run cmd: ATQ0V1E1S0=0&C1 <417.062360> hw:0,6: modem report result: 0 (OK) <417.114350> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2 <417.114362> hw:0,6: modem report result: 0 (OK) <417.166363> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 <417.166376> hw:0,6: modem set mode: -> 0... <417.166383> hw:0,6: modem report result: 0 (OK) <417.218333> hw:0,6: run cmd: ATI <417.218347> hw:0,6: modem report result: 0 (OK) <417.270325> hw:0,6: run cmd: ATI <417.270340> hw:0,6: modem report result: 0 (OK) <417.322318> main: termios changed. <417.322328> hw:0,6: update termios... <417.322343> hw:0,6: run cmd: AT <417.322350> hw:0,6: modem report result: 0 (OK) <417.374317> main: termios changed. <417.374327> hw:0,6: update termios... <417.374341> hw:0,6: run cmd: AT <417.374348> hw:0,6: modem report result: 0 (OK) <417.426317> main: termios changed. <417.426327> hw:0,6: update termios... <417.426341> hw:0,6: run cmd: AT <417.426347> hw:0,6: modem report result: 0 (OK) <417.478318> main: termios changed. <417.478328> hw:0,6: update termios... <417.478343> hw:0,6: run cmd: AT <417.478349> hw:0,6: modem report result: 0 (OK) <417.530318> main: termios changed. <417.530327> hw:0,6: update termios... <417.530341> hw:0,6: run cmd: AT <417.530348> hw:0,6: modem report result: 0 (OK) <417.582319> main: termios changed. <417.582330> hw:0,6: update termios... <417.582344> hw:0,6: run cmd: AT <417.582351> hw:0,6: modem report result: 0 (OK) <417.634318> main: termios changed. <417.634328> hw:0,6: update termios... <417.634341> hw:0,6: run cmd: AT <417.634348> hw:0,6: modem report result: 0 (OK) <417.686319> main: termios changed. <417.686329> hw:0,6: update termios... <417.686343> hw:0,6: run cmd: AT <417.686350> hw:0,6: modem report result: 0 (OK) <417.738365> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 <417.738379> hw:0,6: modem set mode: -> 0... <417.738386> hw:0,6: modem report result: 0 (OK) <417.738442> main: termios changed. <417.738451> hw:0,6: update termios... <417.738462> main: pty closed. <419.594721> main: signal 2: mark termination. <419.594775> hw:0,6: modem_delete...