Hi! I hit this bug with kernels 2.4.x and 2.6.x. Please, take a look at http://www.ssi.bg/~ja/nano.txt. There are patches there to solve this problem. Good luck, Edésio On Mon, May 16, 2005 at 10:09:03AM -0400, Guillaume Bourque wrote: > Hi all, > > I have read and done the LARTC HOW-to and almost everything work's > execpt from the inside network. When load balancing over the two access > it only work on the linux router/nat machine > > > 1) I am running stock mandrake kernel 2.6.8.1-12mdk and using stock > shorewall config 2.0.8 > > 2) I have two internet link and two internals link. Load balance setup > work for the linux router/nat server itself. > > 3) From inside when in load balancing mode I get "MASQUERADE: Route sent > us somewhere else" on the router and the pakects never go thru the FW, I > see they comme in but after that nothing. > > 4) If I replace the load balance default route with only one path then > it work from inside (from either external path). > > > Setup that wont work from inside > > ip route add default scope global nexthop via $P1 dev $IF1 weight 1 \ > nexthop via $P2 dev $IF2 weight 1 > > Setup that is working > > ip route change default scope global nexthop via $P1 dev $IF1 weight 1 > > or > > ip route change default scope global nexthop via $P2 dev $IF2 weight 1 > > Any pointer would be very helpfull ! > > Should I go to 2.4 kernel that comes with mandrake 10.1 ? > > TIA > > _______________________________________________ > LARTC mailing list > LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc -- Grief can take care of itself, but to get the full value of a joy you must have somebody to divide it with. -- Mark Twain _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
