Hi. > If the traffic from all the ppps leave by one interface then you could > mark packets by incoming interface and set up egress shaping with say > HTB on that interface. There is only one eth0 interface to the internet and many ppp for the users. So ... I have to shape every traffic from the ppp interfaces to eth0 (internet) and the same way around, don't I ?? How would it be done with htb ?? The problem ist - 50% of all the traffic on eth0 is to establish the ppp session through a l2tp tunnel and the other 50% are for the real traffic to the internet. So i only want to shape down the traffic from or to the ppp interfaces. But I can't shape the whole traffic on eth0. So ... will there be any problems regarding this ? Of course i read the docs, but I just don't know how exactly to generate the shape-filter for this. I know i have to establish a root entry and make another entry for every ppp device. but how do i connect the interfaces an the traffic ?!? How would I generate this "hard limit" for the traffic ? Many thanks for the help. Regards F.Taeger _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
