HTB + IMQ + SNMPD + MRTG IMQ made its own interface as shown when you typed "ifconfig" So you'll be able to graph just as you graph using the real interface .. - Rio.Martin - On 19 July 2004 pm 19:20, Roy wrote: > MRTG can only show interface load, basicaly it is the graphic > representation of what you will see with ifconfig. > For more advanced graph you need to use another software than mrtg. > > ----- Original Message ----- > From: "Kristiadi Himawan" <kristiadi_himawan@xxxxxxxxxx> > To: <lartc@xxxxxxxxxxxxxxx> > Sent: Monday, July 19, 2004 1:42 PM > Subject: tc+mrtg > > > Hi, > > > > I'm sorry if this question already asked by someone else. > > My question is how to make mrtg graph for traffic that already shape by > > htb. > > > Acctually i already have mrtg for it but the traffic captured was before > > the > > > shaper (PREROUTING and POSTROUTING) > > so the bandwidth shown is not the real traffic. > > So what should i do if i want to see graph traffic that passing through > > my shaper. > > > > Thanks for the help. > > > > Regards, > > > > Kris > > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
