MRTG can only show interface load, basicaly it is the graphic representation of what you will see with ifconfig. For more advanced graph you need to use another software than mrtg. ----- Original Message ----- From: "Kristiadi Himawan" <kristiadi_himawan@xxxxxxxxxx> To: <lartc@xxxxxxxxxxxxxxx> Sent: Monday, July 19, 2004 1:42 PM Subject: tc+mrtg > Hi, > > I'm sorry if this question already asked by someone else. > My question is how to make mrtg graph for traffic that already shape by htb. > Acctually i already have mrtg for it but the traffic captured was before the > shaper (PREROUTING and POSTROUTING) > so the bandwidth shown is not the real traffic. > So what should i do if i want to see graph traffic that passing through my > shaper. > > Thanks for the help. > > Regards, > > Kris > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
