> On 15 Jun 2018, at 2:29 am, Alexandre Petrescu <alexandre.petrescu@xxxxxxxxx> wrote: > > > > Le 14/06/2018 à 07:45, Alexandre Petrescu a écrit : >> Le 13/06/2018 à 20:32, Russ Housley a écrit : >>> Alex: >>>> >>>> I have just tried again: if I submit just the xml then the web page >>>> complains in red about title and draft name. If I submit both the xml >>>> and the txt then it accepts it. >>>> >>>> The complain in red is this: >>>>> Could not extract a valid draft revision from the upload. To fix this >>>>> in a text upload, please make sure that the full draft name including >>>>> revision number appears centered on its own line below the document >>>>> title on the first page. In an xml upload, please make sure that the >>>>> top-level <rfc/> element has a docName attribute which provides the >>>>> full draft name including revision number. >>> >>> Others have had success submitting just the .xml file. >>> >>> Looking at your .xml file, you need to remove the ".txt" from the docName as follows: >>> >>> OLD: >>> >>> <rfc category="std" >>> docName="draft-ietf-ipwave-ipv6-over-80211ocb-23.txt" >>> ipr="trust200902"> >>> >>> NEW: >>> >>> <rfc category="std" >>> docName="draft-ietf-ipwave-ipv6-over-80211ocb-23" >>> ipr="trust200902"> > > I have tried to not use the .txt extension in the docName. > > The submission was accepted, without asking the txt file. > > I think the question is in my interpretation of that 'full draft name' in the error message above. It means to me a file name with txt extension. > > Maybe 'full draft name' means just the name of draft but without the txt extension. ..txt, .xml, .html, .pdf etc. are the format of the document encoded into the filename. You have "<name>.<format>”. > Alex > >> I will try that. >> Alex >>> >>> Russ >>> >>> > -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: marka@xxxxxxx
