ArtDio? Not a "state of art" product, but works. On Sunday 21 October 2007 01:41, Simon Horne wrote: > Cesc > > Try just having the permanent section and GWPrefix section. Calls to > asterisk1 must be 1xxx and calls to asterisk 2 must be 2xxx and 1 and 2 are > stripped off before sending to the asterisk box that should work. > > You should also start GnuGk in level 5 debug mode (gnugk -ttttt > -otrace.txt) and see exactly where and why the calls are being dropped. > > Also try PacPhone www.pacphone.com and see what you get. > > With reference to H.323 IP Phones? They are quite hard to get. Cisco still > make them. Failing that I have sourced unbranded phones from china in the > past. Contact me off list. > > Simon > > > -----Original Message----- > From: openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx > [mailto:openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx]On Behalf Of Cesc > Santa > Sent: Tuesday, 16 October 2007 7:48 PM > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Not routing ... > > > Hi, > > I am having some trouble getting the GK to route properly for some types of > phones. > I have a GK controlling 2 asterisks with H323. On the GK, 3 phones > register: - a swissvoice > - an sjphone > - an old siemens optipoint > > Well, it all goes fine when working with SJPhone ... > But with the other two, I cannot get them to properly reach the asterisks > ... I get a "not reachable" and then the GK drops the call. > > This is what I get on the monitor console: > ACF|192.168.200.49:1720|4766_endp|19200 > > |1600:dialedDigits=1600:dialedDigits |70049:dialedDigits > |false; > > DCF|192.168.200.49|4766_endp|19200|normalDrop; > > ACF|192.168.200.41:1685|1499_endp|4096 |1600:dialedDigits > > |70041:h323_ID=70041:dialedDigits |false; > > ACF|192.168.200.207:1720|1500_endp|5900 |1600:dialedDigits > > |700207:dialedDigits=700207:h323_ID=700207:dialedDigits=700207:h323_ID > |false; > > See how the call from 192.168.200.49 / 70049 gets rejected, as well as that > from 200.207 ... Both have the "dialeddigits" value filled in, whereas the > one working (200.41), has an empty dialeddigits. > > This is a piece of the config: > [RasSrv::GWPrefixes] > asterisk1=1 > asterisk2=2 > ;wave=1 > > [RasSrv::PermanentEndpoints] > ;192.168.2.102=4002 > 192.168.200.149=asterisk1;1 > 192.168.200.249=asterisk2;2 > ;192.168.1.234=wave; > > [RasSrv::RewriteE164] > ;%.=. > ;2.=2222. > > [RasSrv::GWRewriteE164] > asterisk1=out=1.=. > asterisk2=out=2.=. > > > Ideas? > Help would be appreciated. > > Cesc > PS - I am on the lookout for a working H323 HARDphone (not softphone) to > work with GNU GK and Asterisk. Any names? > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: > http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
