Cesc Try just having the permanent section and GWPrefix section. Calls to asterisk1 must be 1xxx and calls to asterisk 2 must be 2xxx and 1 and 2 are stripped off before sending to the asterisk box that should work. You should also start GnuGk in level 5 debug mode (gnugk -ttttt -otrace.txt) and see exactly where and why the calls are being dropped. Also try PacPhone www.pacphone.com and see what you get. With reference to H.323 IP Phones? They are quite hard to get. Cisco still make them. Failing that I have sourced unbranded phones from china in the past. Contact me off list. Simon -----Original Message----- From: openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx]On Behalf Of Cesc Santa Sent: Tuesday, 16 October 2007 7:48 PM To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: Not routing ... Hi, I am having some trouble getting the GK to route properly for some types of phones. I have a GK controlling 2 asterisks with H323. On the GK, 3 phones register: - a swissvoice - an sjphone - an old siemens optipoint Well, it all goes fine when working with SJPhone ... But with the other two, I cannot get them to properly reach the asterisks ... I get a "not reachable" and then the GK drops the call. This is what I get on the monitor console: ACF|192.168.200.49:1720|4766_endp|19200 |1600:dialedDigits=1600:dialedDigits |70049:dialedDigits |false; DCF|192.168.200.49|4766_endp|19200|normalDrop; ACF|192.168.200.41:1685|1499_endp|4096 |1600:dialedDigits |70041:h323_ID=70041:dialedDigits |false; ACF|192.168.200.207:1720|1500_endp|5900 |1600:dialedDigits |700207:dialedDigits=700207:h323_ID=700207:dialedDigits=700207:h323_ID |false; See how the call from 192.168.200.49 / 70049 gets rejected, as well as that from 200.207 ... Both have the "dialeddigits" value filled in, whereas the one working (200.41), has an empty dialeddigits. This is a piece of the config: [RasSrv::GWPrefixes] asterisk1=1 asterisk2=2 ;wave=1 [RasSrv::PermanentEndpoints] ;192.168.2.102=4002 192.168.200.149=asterisk1;1 192.168.200.249=asterisk2;2 ;192.168.1.234=wave; [RasSrv::RewriteE164] ;%.=. ;2.=2222. [RasSrv::GWRewriteE164] asterisk1=out=1.=. asterisk2=out=2.=. Ideas? Help would be appreciated. Cesc PS - I am on the lookout for a working H323 HARDphone (not softphone) to work with GNU GK and Asterisk. Any names? ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
