----- Original Message -----
Sent: Tuesday, July 29, 2003 1:15
AM
Subject: Re: [Openh323gk-users] CISCO
gateways and GNUGK
We are working with Cisco VG200s, AS5300s and
AS5350.
I would very much like to see someone's Cisco
configs that have voip dial peers that point to the GNUGK. and the GNUGK
ini.
We have outbound calls working no problem.
That is :
user(terminal) -> gatekeeper -> gateway
-> PSTN (this works fine) We had this working in a hour including
software install.
We cannot get this working:
PSTN -> gateway -> gatekeeper ->
gateway -> PSTN (this doesn't work) If we take the GK out
of the mix...gw to gw it works fine.
----- Original Message -----
Sent: Monday, July 28, 2003 2:11
PM
Subject: RE: [Openh323gk-users] CISCO
gateways and GNUGK
Sorry, mail said AS5300...
i was taling about AS5350 not AS5300.
Thankx
----- Original Message -----
Sent: Monday, July 28, 2003 10:57
PM
Subject: RE: [Openh323gk-users]
CISCO gateways and GNUGK
I have AS5300 in both sides and I have not problems with GNUGK...
I use it in Routed mode.
Hello,
I am having problem with CiscoAS5300, i
think there are some compatibility issues.
Thankx,
Hemant
----- Original Message -----
Sent: Monday, July 28, 2003
8:44 PM
Subject: [Openh323gk-users]
CISCO gateways and GNUGK
Does the
GNUGK except inbound traffic from Cisco gateways? VG200,
AS5300 and AS5350. I saw the compatiblity list but we are
unable to get this to work with traffic coming from a gateway.
Does anyone have this working?
We have
it working with terminals and outbound trafic to the gateways works
fine too. It the inbound from the gateway to the GK that is
the problem.
user
-> gateway -> gatekeeper -> gateway ->
user
Please
post your ini and dial- peers
We are
not having the gateways register with GNUGK.
