Re: [Openh323gk-users] CISCO gateways and GNUGK

"Guy Guckenberger IT" <guy.guckenberger@imtechnologies.com> · Mon, 28 Jul 2003 17:00:46 -0400

Title: Mensaje

Ok let me be a little more clear:

caller -> gateway a  ->(voip 
peer) GK --> (xxx pots peer )gateway b -> caller

Without registration how does gateway "a" get to 
gateway "b" though the GK? What does the "VOIP" dial peer look like on 
gateway "a"

Here is our VOIP dial peer from gateway 
"a":

dial-peer voice 3232 
voip
 destination-pattern 3232
 progress_ind setup enable 
3
 progress_ind alert enable 8
 voice-class codec 
1
 voice-class h323 1
 session target 
ipv4:172.25.96.100
 no vad

Where the session target is the gatekeeper.  
This dial-peer does not work with the GK.

Thanks

  ----- Original Message ----- 
  From: 
  Hemant Kumar 

  To: openh323gk-users@lists.sourceforge.net 

  Sent: Monday, July 28, 2003 4:40 PM
  Subject: Re: [Openh323gk-users] CISCO 
  gateways and GNUGK

  Hi,

  the XXXX peer is like this
dial-peer 
  voice XXXX pots
 destination-pattern 
  XXXXXXXXT
 direct-inward-dial
 port 3/0:D
 prefix 
  07
!

  This is the LOG from Cisco AS5350:
  D9E : 54934784hs.487340 +-1 +8 pid:XXXXX 
  Originate XXXXXXXXXXXXXX
  dur 00:00:00 tx:0/0 rx:0/0 65 (message in incomp 
  call state (101)) IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms 
  g729r8 pre-ietf 

  Thankx and rgds,
  Hemant

    ----- Original Message ----- 
    From: 
    Guy Guckenberger IT 

    To: openh323gk-users@lists.sourceforge.net 

    Sent: Tuesday, July 29, 2003 1:43 
    AM
    Subject: Re: [Openh323gk-users] CISCO 
    gateways and GNUGK

    Can we see your voip dial peer?

    Thanks

      ----- Original Message ----- 
      From: 
      Sebastian Nocetti 
      To: openh323gk-users@lists.sourceforge.net 

      Sent: Monday, July 28, 2003 4:04 
      PM
      Subject: RE: [Openh323gk-users] CISCO 
      gateways and GNUGK

      this gw that generate calls...

      interface FastEthernet0
 ip address xxx.xxx.xxx.xxx 
      255.255.255.248
 no ip route-cache
 no ip 
      mroute-cache
 duplex auto
 speed 
      auto
 h323-gateway voip interface
 h323-gateway voip id 
      gk-01 ipaddr xxx.xxx.xxx.xxx 1719  -> ip del 
      gatekeeper.
 h323-gateway voip h323-id voip-gw-02
       h323-gateway voip tech-prefix 88#

        -----Mensaje original-----
De: 
        openh323gk-users-admin@lists.sourceforge.net 
        [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de 
        Sebastian Nocetti
Enviado el: lunes, 28 de julio de 2003 
        16:02
Para: 
        openh323gk-users@lists.sourceforge.net
Asunto: RE: 
        [Openh323gk-users] CISCO gateways and GNUGK

        This is my GW configuration, this is the GW to 
        terminate calls

        IMAGE: c5300-is-mz.122-6.bin

        interface 
        FastEthernet0
 ip address 192.168.0.10 255.255.255.0
 no ip 
        mroute-cache
 duplex half
 speed 10
 no cdp 
        enable
 h323-gateway voip interface
 h323-gateway voip 
        id gk-01 ipaddr [put here 
        ip-gatekeeper] 
        1719
 h323-gateway voip h323-id voip-gw-03
         h323-gateway voip 
        tech-prefix 78#
 h323-gateway voip tech-prefix 60#

        dial-peer voice 89 
        pots
 destination-pattern 
        78#T
 direct-inward-dial
 port 2:D

        dial-peer voice 90 
        pots
 destination-pattern 
        60#T
 direct-inward-dial
 port 0:0

        this is my Gatekeeper configuration file.

        [Gatekeeper::Main]
Fourtytwo=42
Name=gk-01
        Home=put here ip-listening
        TimeToLive=600

        [RoutedMode]
GKRouted=1
H245Routed=1

        [RasSrv::PermanentEndpoints]
xxx.xxx.xxx.xxx=voip-gw-02;88#
192.168.0.10=voip-gw-03;78#,60#

          -----Mensaje original-----
De: 
          openh323gk-users-admin@lists.sourceforge.net 
          [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de 
          Guy Guckenberger IT
Enviado el: lunes, 28 de julio de 
          2003 15:14
Para: 
          openh323gk-users@lists.sourceforge.net
Asunto: Re: 
          [Openh323gk-users] CISCO gateways and GNUGK

          Maybe Sebastian could post his As5300 
          config and ini settings for the GK.  Could you also let us what 
          version of Cisco IOS you are using.

          Thanks!

            ----- Original Message ----- 
            From: 
            Hemant 
            Kumar 
            To: openh323gk-users@lists.sourceforge.net 

            Sent: Monday, July 28, 2003 
            1:53 PM
            Subject: Re: [Openh323gk-users] 
            CISCO gateways and GNUGK

            i was taling about AS5350 not AS5300. 

            Thankx 

              ----- Original Message ----- 
              From: 
              Sebastian Nocetti 

              To: openh323gk-users@lists.sourceforge.net 

              Sent: Monday, July 28, 2003 
              10:57 PM
              Subject: RE: 
              [Openh323gk-users] CISCO gateways and GNUGK

              I have AS5300 in both sides and I have not problems with 
              GNUGK... I use it in Routed mode.

                -----Mensaje original-----
De: openh323gk-users-admin@lists.sourceforge.net 
                [mailto:openh323gk-users-admin@lists.sourceforge.net] En 
                nombre de Hemant Kumar
Enviado el: lunes, 28 de 
                julio de 2003 12:58
Para: openh323gk-users@lists.sourceforge.net
Asunto: 
                Re: [Openh323gk-users] CISCO gateways and 
                GNUGK

                Hello,

                I am having problem with 
                CiscoAS5300, i think there are some compatibility issues. 

                Thankx,
                Hemant

                  ----- Original Message ----- 

                  From: 
                  Guy 
                  Guckenberger 
                  To: openh323gk-users@lists.sourceforge.net 

                  Sent: Monday, July 28, 
                  2003 8:44 PM
                  Subject: 
                  [Openh323gk-users] CISCO gateways and GNUGK

                  Does the GNUGK except inbound traffic from Cisco 
                  gateways?  VG200, AS5300 and AS5350.  I saw the 
                  compatiblity list but we are unable to get this to work with 
                  traffic coming from a gateway.  Does anyone have this 
                  working? 

                  We 
                  have it working with terminals and outbound trafic to the 
                  gateways works fine too.  It the inbound from the gateway 
                  to the GK that is the problem.

                  user -> gateway -> gatekeeper -> gateway -> 
                  user

                  Please post your ini and dial- 
peers

                  We 
                  are not having the gateways register with GNUGK.  