This is my GW configuration, this is the GW to
terminate calls
IMAGE: c5300-is-mz.122-6.bin
interface
FastEthernet0
ip address 192.168.0.10 255.255.255.0
no ip
mroute-cache
duplex half
speed 10
no cdp
enable
h323-gateway voip interface
h323-gateway voip id
gk-01 ipaddr [put here ip-gatekeeper] 1719
h323-gateway
voip h323-id voip-gw-03
h323-gateway voip
tech-prefix 78#
h323-gateway voip tech-prefix 60#
dial-peer voice 89
pots
destination-pattern
78#T
direct-inward-dial
port 2:D
dial-peer voice 90
pots
destination-pattern
60#T
direct-inward-dial
port 0:0
this is my Gatekeeper configuration file.
[Gatekeeper::Main]
Fourtytwo=42
Name=gk-01
Home=put here ip-listening
TimeToLive=600
[RoutedMode]
GKRouted=1
H245Routed=1
[RasSrv::PermanentEndpoints]
xxx.xxx.xxx.xxx=voip-gw-02;88#
192.168.0.10=voip-gw-03;78#,60#
Maybe Sebastian could post his As5300
config and ini settings for the GK. Could you also let us what
version of Cisco IOS you are using.
Thanks!
----- Original Message -----
Sent: Monday, July 28, 2003 1:53
PM
Subject: Re: [Openh323gk-users]
CISCO gateways and GNUGK
i was taling about AS5350 not AS5300.
Thankx
----- Original Message -----
Sent: Monday, July 28, 2003
10:57 PM
Subject: RE: [Openh323gk-users]
CISCO gateways and GNUGK
I have AS5300 in both sides and I have not problems with
GNUGK... I use it in Routed mode.
Hello,
I am having problem with CiscoAS5300,
i think there are some compatibility issues.
Thankx,
Hemant
----- Original Message -----
Sent: Monday, July 28, 2003
8:44 PM
Subject: [Openh323gk-users]
CISCO gateways and GNUGK
Does
the GNUGK except inbound traffic from Cisco gateways?
VG200, AS5300 and AS5350. I saw the compatiblity list but
we are unable to get this to work with traffic coming from a
gateway. Does anyone have this
working?
We
have it working with terminals and outbound trafic to the
gateways works fine too. It the inbound from the gateway
to the GK that is the problem.
user
-> gateway -> gatekeeper -> gateway ->
user
Please post your ini and dial- peers
We
are not having the gateways register with GNUGK.