Re: [Openh323gk-users] CISCO gateways and GNUGK

"Guy Guckenberger IT" <guy.guckenberger@imtechnologies.com> · Mon, 28 Jul 2003 15:45:37 -0400

Title: Mensaje

We are working with Cisco VG200s, AS5300s and 
AS5350.

I would very much like to see someone's Cisco 
configs that have voip dial peers that point to the GNUGK.  and the GNUGK 
ini.

We have outbound calls working no problem.  
That is :

user(terminal) -> gatekeeper -> gateway -> 
PSTN (this works fine)  We had this working in a hour including software 
install.

We cannot get this working:

PSTN -> gateway -> gatekeeper -> 
gateway -> PSTN  (this doesn't work)  If we take the GK out of 
the mix...gw to gw it works fine.

  ----- Original Message ----- 
  From: 
  Sebastian Nocetti 
  To: openh323gk-users@lists.sourceforge.net 

  Sent: Monday, July 28, 2003 2:11 PM
  Subject: RE: [Openh323gk-users] CISCO 
  gateways and GNUGK

  Sorry, mail said AS5300...

    -----Mensaje original-----
De: openh323gk-users-admin@lists.sourceforge.net 
    [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de 
    Hemant Kumar
Enviado el: lunes, 28 de julio de 2003 
    14:53
Para: openh323gk-users@lists.sourceforge.net
Asunto: 
    Re: [Openh323gk-users] CISCO gateways and GNUGK

    i was taling about AS5350 not AS5300. 

    Thankx 

      ----- Original Message ----- 
      From: 
      Sebastian Nocetti 
      To: openh323gk-users@lists.sourceforge.net 

      Sent: Monday, July 28, 2003 10:57 
      PM
      Subject: RE: [Openh323gk-users] CISCO 
      gateways and GNUGK

      I have AS5300 in both sides and I have not problems with GNUGK... I 
      use it in Routed mode.

        -----Mensaje original-----
De: openh323gk-users-admin@lists.sourceforge.net 
        [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de 
        Hemant Kumar
Enviado el: lunes, 28 de julio de 2003 
        12:58
Para: openh323gk-users@lists.sourceforge.net
Asunto: 
        Re: [Openh323gk-users] CISCO gateways and GNUGK

        Hello,

        I am having problem with CiscoAS5300, i 
        think there are some compatibility issues. 

        Thankx,
        Hemant

          ----- Original Message ----- 
          From: 
          Guy 
          Guckenberger 
          To: openh323gk-users@lists.sourceforge.net 

          Sent: Monday, July 28, 2003 8:44 
          PM
          Subject: [Openh323gk-users] CISCO 
          gateways and GNUGK

          Does the 
          GNUGK except inbound traffic from Cisco gateways?  VG200, AS5300 
          and AS5350.  I saw the compatiblity list but we are unable to get 
          this to work with traffic coming from a gateway.  Does anyone 
          have this working? 

          We have it 
          working with terminals and outbound trafic to the gateways works fine 
          too.  It the inbound from the gateway to the GK that is the 
          problem.

          user -> 
          gateway -> gatekeeper -> gateway -> user

          Please 
          post your ini and dial- peers

          We are not 
          having the gateways register with GNUGK.  