Sam Ravnborg <sam@xxxxxxxxxxxx> 于2020年5月2日周六 下午2:30写道：
Hi dillon min
> > okay, thanks alexandre, i will go through these docs. currently i'm on may
> day holiday, will be back at next wensday.
> after go back to work. i will separate this patch to five part with 9
> patchs , should be more clear
>
> dts releated
> 1, ARM: dts: stm32: Add i2c3 node for stm32f429
> 2, ARM: dts: stm32: Add drm panel ili9341 nodes connect to ldtc
> support for stm32f429-disco board
> 3, ARM: dts: stm32: Add stmpe811 touch screen support for
> stm32f429-disco board
> 4, ARM: dts: stm32: Add l3gd20 gyroscope sensor support for
> stm32f429-disco board
>
> clk releated
> 1, clk: stm32: Fix ltdc loading hang in set clk rate, pll_hw set to
> clks[PLL_VCO_SAI] but not clks[PLL_SAI]
> 2, clk: stm32: Add CLK_IGNORE_UNUSED flags for ltdc, make sure ltdc clk
> not be released after system startup
>
> spi releated
> 1, spi: stm32: Add transfer mode SPI_SIMPLE_RX, SPI_3WIRE_RX support
> for stm32f4
>
> drm releated
> 1, drm/panel: Add panel driver ilitek-ili9341
>
> doc releated
> 1, dt-bindings: display: panel: Add binding document for Ilitek Ili9341
Patch separation looks good.
Please cc: me on both the binding and the panel patches.
The binding must be in DT Schema format (.yaml).
See a lot of examples in drm-misc-next for inspiration.
Looks forward to see/review your submission.
Sam
hi Sam,
just sumbmit a patchset about ltdc with ili-9341 support on stm32f429-disco board, with yaml
documents inside as well.
thanks,
Dillon,
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
