On Sat, Sep 21, 2024 at 5:16 AM alex vinarskis <alex.vinarskis@xxxxxxxxx> wrote: > > On Sat, 21 Sept 2024 at 00:25, Rob Clark <robdclark@xxxxxxxxx> wrote: > > > > On Thu, Sep 19, 2024 at 10:01 AM Aleksandrs Vinarskis > > <alex.vinarskis@xxxxxxxxx> wrote: > > > > > > Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. > > > > > > Working: > > > * Touchpad > > > * Keyboard (only post suspend&resume, i2c-hid patch WIP) > > > * eDP, with brightness control > > > * NVME > > > * USB Type-C ports in USB2/USB3 (one orientation) > > > * WiFi > > > * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) > > > * Lid switch > > > * Sleep/suspend, nothing visibly broken on resume > > > > > > Not working: > > > * Speakers (WIP, pin guessing, x4 WSA8845) > > > * Microphones (WIP, pin guessing) > > > * Fingerprint Reader (WIP, USB MP with ptn3222) > > > * USB as DP/USB3 (WIP, PS8830 based) > > > * Camera > > > * Battery Info > > > > > > Should be working, but cannot be tested due to lack of hw: > > > * Higher res OLED, higher res IPS panels > > > > My suspicion is that OLED vs IPS will require different dtb. I'm > > expecting the OLED to use samsung,atna33xc20 panel driver (see "arm64: > > dts: qcom: x1e80100-yoga: Update panel bindings"), but IPS can > > probably use edp-panel. I'm not sure if anyone has gotten both panels > > working on any other device that has both IPS and OLED variants, so > > this remains a theory. The t14s, which also has both IPS and OLED, > > has different DMI/CHID values for the different SKUs, so DtbLoader > > should be able to pick the correct dtb, once it exists. > > Thanks for the input. > > Will take a look at that driver. I have briefly looked into .inf from > Dell's Windows driver trying to identify them - all three panels have > dell-specific model naming, which unfortunately does not help much. As > far as I found from unofficial sources (1), the particular OLED is LG > made, not Samsung. Ok, if it is not a samsung panel, then maybe panel-edp will work. So far all the OLEDs I've seen are samsung, and they have a different power sequence (hence needing different panel driver) > Luckily, Peter de Kraker (CCed) has reached out to me yesterday as he > got an OLED variant - will test on his machine in the following weeks, > as well as record CHIDs once he is able to boot with a working > display. Sounds rather unscalable though if each variant of laptop > would need a separate dtb? Eg. Dell's Inspiron model supports both > x1e80 and x1e78 (luckily no OLEDs though). If some OEM would release a > model with both displays and SoCs customizable, the number of variants > would grow pretty fast... So far, it is just the samsung panel vs everyone else, where we would need different dtb. Maybe we come up with other variants, we'll see as time goes on, but it shouldn't need to be for _every_ variant. For the panel, edid-decode will tell us the panel name/vendor, ie. something like: cat /sys/devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0/card0-eDP-1/edid | edid-decode BR, -R > [1] https://www.thelec.net/news/articleView.html?idxno=4858 > > Alex > > > > > BR, > > -R > > > > > * Touchscreen > > > > > > Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx> > > > --- > > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > > .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ > > > 2 files changed, 861 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > > index ae002c7cf126..111c589d6bae 100644 > > > --- a/arch/arm64/boot/dts/qcom/Makefile > > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > > @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > > > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > new file mode 100644 > > > index 000000000000..d387f133c398 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > @@ -0,0 +1,860 @@ > > > +// SPDX-License-Identifier: BSD-3-Clause > > > +/* > > > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > > > + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx> > > > + */ > > > + > > > +/dts-v1/; > > > + > > > +#include <dt-bindings/gpio/gpio.h> > > > +#include <dt-bindings/input/gpio-keys.h> > > > +#include <dt-bindings/input/input.h> > > > +#include <dt-bindings/leds/common.h> > > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > > + > > > +#include "x1e80100.dtsi" > > > +#include "x1e80100-pmics.dtsi" > > > + > > > +/ { > > > + model = "Dell XPS 13 9345"; > > > + compatible = "dell,tributo-13", "qcom,x1e80100"; > > > + chassis-type = "laptop"; > > > + > > > + gpio-keys { > > > + compatible = "gpio-keys"; > > > + > > > + pinctrl-0 = <&hall_int_n_default>; > > > + pinctrl-names = "default"; > > > + > > > + switch-lid { > > > + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; > > > + linux,input-type = <EV_SW>; > > > + linux,code = <SW_LID>; > > > + wakeup-source; > > > + wakeup-event-action = <EV_ACT_DEASSERTED>; > > > + }; > > > + }; > > > + > > > + leds { > > > + compatible = "gpio-leds"; > > > + > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&cam_indicator_en>; > > > + > > > + led-camera-indicator { > > > + label = "white:camera-indicator"; > > > + function = LED_FUNCTION_INDICATOR; > > > + color = <LED_COLOR_ID_WHITE>; > > > + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > > > + linux,default-trigger = "none"; > > > + default-state = "off"; > > > + /* Reuse as a panic indicator until we get a "camera on" trigger */ > > > + panic-indicator; > > > + }; > > > + }; > > > + > > > + pmic-glink { > > > + compatible = "qcom,x1e80100-pmic-glink", > > > + "qcom,sm8550-pmic-glink", > > > + "qcom,pmic-glink"; > > > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > > > + <&tlmm 123 GPIO_ACTIVE_HIGH>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + /* Right-side USB Type-C port */ > > > + connector@0 { > > > + compatible = "usb-c-connector"; > > > + reg = <0>; > > > + power-role = "dual"; > > > + data-role = "dual"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + pmic_glink_ss0_hs_in: endpoint { > > > + remote-endpoint = <&usb_1_ss0_dwc3_hs>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + pmic_glink_ss0_ss_in: endpoint { > > > + remote-endpoint = <&usb_1_ss0_qmpphy_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + /* Left-side USB Type-C port */ > > > + connector@1 { > > > + compatible = "usb-c-connector"; > > > + reg = <1>; > > > + power-role = "dual"; > > > + data-role = "dual"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + pmic_glink_ss1_hs_in: endpoint { > > > + remote-endpoint = <&usb_1_ss1_dwc3_hs>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + pmic_glink_ss1_ss_in: endpoint { > > > + remote-endpoint = <&usb_1_ss1_qmpphy_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + reserved-memory { > > > + linux,cma { > > > + compatible = "shared-dma-pool"; > > > + size = <0x0 0x8000000>; > > > + reusable; > > > + linux,cma-default; > > > + }; > > > + }; > > > + > > > + vph_pwr: vph-pwr-regulator { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "vph_pwr"; > > > + regulator-min-microvolt = <3700000>; > > > + regulator-max-microvolt = <3700000>; > > > + > > > + regulator-always-on; > > > + regulator-boot-on; > > > + }; > > > + > > > + vreg_edp_3p3: regulator-edp-3p3 { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "VREG_EDP_3P3"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + > > > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; > > > + enable-active-high; > > > + > > > + pinctrl-0 = <&edp_reg_en>; > > > + pinctrl-names = "default"; > > > + > > > + regulator-boot-on; > > > + }; > > > + > > > + vreg_nvme: regulator-nvme { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "VREG_NVME_3P3"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + > > > + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; > > > + enable-active-high; > > > + > > > + pinctrl-0 = <&nvme_reg_en>; > > > + pinctrl-names = "default"; > > > + }; > > > +}; > > > + > > > +&apps_rsc { > > > + regulators-0 { > > > + compatible = "qcom,pm8550-rpmh-regulators"; > > > + qcom,pmic-id = "b"; > > > + vdd-bob1-supply = <&vph_pwr>; > > > + vdd-bob2-supply = <&vph_pwr>; > > > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; > > > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > > > + vdd-l5-l16-supply = <&vreg_bob1>; > > > + vdd-l6-l7-supply = <&vreg_bob2>; > > > + vdd-l8-l9-supply = <&vreg_bob1>; > > > + vdd-l12-supply = <&vreg_s5j_1p2>; > > > + vdd-l15-supply = <&vreg_s4c_1p8>; > > > + vdd-l17-supply = <&vreg_bob2>; > > > + > > > + vreg_bob1: bob1 { > > > + regulator-name = "vreg_bob1"; > > > + regulator-min-microvolt = <3008000>; > > > + regulator-max-microvolt = <3960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_bob2: bob2 { > > > + regulator-name = "vreg_bob2"; > > > + regulator-min-microvolt = <2504000>; > > > + regulator-max-microvolt = <3008000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2b_3p0: ldo2 { > > > + regulator-name = "vreg_l2b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l4b_1p8: ldo4 { > > > + regulator-name = "vreg_l4b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l6b_1p8: ldo6 { > > > + regulator-name = "vreg_l6b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <2960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l8b_3p0: ldo8 { > > > + regulator-name = "vreg_l8b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l9b_2p9: ldo9 { > > > + regulator-name = "vreg_l9b_2p9"; > > > + regulator-min-microvolt = <2960000>; > > > + regulator-max-microvolt = <2960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l12b_1p2: ldo12 { > > > + regulator-name = "vreg_l12b_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l13b_3p0: ldo13 { > > > + regulator-name = "vreg_l13b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l14b_3p0: ldo14 { > > > + regulator-name = "vreg_l14b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l15b_1p8: ldo15 { > > > + regulator-name = "vreg_l15b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l17b_2p5: ldo17 { > > > + regulator-name = "vreg_l17b_2p5"; > > > + regulator-min-microvolt = <2504000>; > > > + regulator-max-microvolt = <2504000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-1 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "c"; > > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + > > > + vreg_s4c_1p8: smps4 { > > > + regulator-name = "vreg_s4c_1p8"; > > > + regulator-min-microvolt = <1856000>; > > > + regulator-max-microvolt = <2000000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1c_1p2: ldo1 { > > > + regulator-name = "vreg_l1c_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2c_0p8: ldo2 { > > > + regulator-name = "vreg_l2c_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3c_0p9: ldo3 { > > > + regulator-name = "vreg_l3c_0p9"; > > > + regulator-min-microvolt = <920000>; > > > + regulator-max-microvolt = <920000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-2 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "d"; > > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s4c_1p8>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + > > > + vreg_l1d_0p8: ldo1 { > > > + regulator-name = "vreg_l1d_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2d_0p9: ldo2 { > > > + regulator-name = "vreg_l2d_0p9"; > > > + regulator-min-microvolt = <912000>; > > > + regulator-max-microvolt = <912000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3d_1p8: ldo3 { > > > + regulator-name = "vreg_l3d_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-3 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "e"; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > > + > > > + vreg_l2e_0p8: ldo2 { > > > + regulator-name = "vreg_l2e_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3e_1p2: ldo3 { > > > + regulator-name = "vreg_l3e_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-4 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "f"; > > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + > > > + vreg_s1f_0p7: smps1 { > > > + regulator-name = "vreg_s1f_0p7"; > > > + regulator-min-microvolt = <700000>; > > > + regulator-max-microvolt = <1100000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-6 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "i"; > > > + vdd-l1-supply = <&vreg_s4c_1p8>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + vdd-s2-supply = <&vph_pwr>; > > > + > > > + vreg_s1i_0p9: smps1 { > > > + regulator-name = "vreg_s1i_0p9"; > > > + regulator-min-microvolt = <900000>; > > > + regulator-max-microvolt = <920000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_s2i_1p0: smps2 { > > > + regulator-name = "vreg_s2i_1p0"; > > > + regulator-min-microvolt = <1000000>; > > > + regulator-max-microvolt = <1100000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1i_1p8: ldo1 { > > > + regulator-name = "vreg_l1i_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2i_1p2: ldo2 { > > > + regulator-name = "vreg_l2i_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3i_0p8: ldo3 { > > > + regulator-name = "vreg_l3i_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-7 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "j"; > > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + vdd-s5-supply = <&vph_pwr>; > > > + > > > + vreg_s5j_1p2: smps5 { > > > + regulator-name = "vreg_s5j_1p2"; > > > + regulator-min-microvolt = <1256000>; > > > + regulator-max-microvolt = <1304000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1j_0p9: ldo1 { > > > + regulator-name = "vreg_l1j_0p9"; > > > + regulator-min-microvolt = <912000>; > > > + regulator-max-microvolt = <912000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2j_1p2: ldo2 { > > > + regulator-name = "vreg_l2j_1p2"; > > > + regulator-min-microvolt = <1256000>; > > > + regulator-max-microvolt = <1256000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3j_0p8: ldo3 { > > > + regulator-name = "vreg_l3j_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > +}; > > > + > > > +&pcie4 { > > > + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; > > > + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; > > > + > > > + pinctrl-0 = <&pcie4_default>; > > > + pinctrl-names = "default"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie4_phy { > > > + vdda-phy-supply = <&vreg_l3i_0p8>; > > > + vdda-pll-supply = <&vreg_l3e_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie6a { > > > + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > > > + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > > > + > > > + vddpe-3v3-supply = <&vreg_nvme>; > > > + > > > + pinctrl-0 = <&pcie6a_default>; > > > + pinctrl-names = "default"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie6a_phy { > > > + vdda-phy-supply = <&vreg_l1d_0p8>; > > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_0 { > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_1 { > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_2 { > > > + status = "okay"; > > > +}; > > > + > > > +&remoteproc_adsp { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", > > > + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&remoteproc_cdsp { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", > > > + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&gpu { > > > + status = "okay"; > > > + > > > + zap-shader { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; > > > + }; > > > +}; > > > + > > > +&mdss { > > > + status = "okay"; > > > +}; > > > + > > > +&mdss_dp3 { > > > + compatible = "qcom,x1e80100-dp"; > > > + /delete-property/ #sound-dai-cells; > > > + > > > + status = "okay"; > > > + > > > + aux-bus { > > > + panel { > > > + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ > > > + compatible = "edp-panel"; > > > + power-supply = <&vreg_edp_3p3>; > > > + > > > + port { > > > + edp_panel_in: endpoint { > > > + remote-endpoint = <&mdss_dp3_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + ports { > > > + port@1 { > > > + reg = <1>; > > > + > > > + mdss_dp3_out: endpoint { > > > + data-lanes = <0 1 2 3>; > > > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > > > + > > > + remote-endpoint = <&edp_panel_in>; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&mdss_dp3_phy { > > > + vdda-phy-supply = <&vreg_l3j_0p8>; > > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&i2c0 { > > > + clock-frequency = <400000>; > > > + status = "okay"; > > > + > > > + keyboard@5 { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x5>; > > > + > > > + hid-descr-addr = <0x20>; > > > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&kybd_default>; > > > + pinctrl-names = "default"; > > > + > > > + wakeup-source; > > > + }; > > > +}; > > > + > > > +&i2c3 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* PS8830 Retimer @0x8 */ > > > + /* Unknown device @0x9 */ > > > +}; > > > + > > > +&i2c5 { > > > + clock-frequency = <100000>; > > > + status = "disabled"; > > > + /* Unknown device @0x3b */ > > > +}; > > > + > > > +&i2c7 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* PS8830 Retimer @0x8 */ > > > + /* Unknown device @0x9 */ > > > +}; > > > + > > > +&i2c8 { > > > + clock-frequency = <400000>; > > > + > > > + status = "okay"; > > > + > > > + touchscreen@0 { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x0>; > > > + > > > + hid-descr-addr = <0x1>; > > > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&ts0_default>; > > > + pinctrl-names = "default"; > > > + }; > > > +}; > > > + > > > +&i2c9 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* USB3 retimer device @0x4f */ > > > +}; > > > + > > > +&i2c17 { > > > + clock-frequency = <400000>; > > > + status = "okay"; > > > + > > > + touchpad@2c { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x2c>; > > > + > > > + hid-descr-addr = <0x20>; > > > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&tpad_default>; > > > + pinctrl-names = "default"; > > > + > > > + wakeup-source; > > > + }; > > > +}; > > > + > > > +&smb2360_0_eusb2_repeater { > > > + vdd18-supply = <&vreg_l3d_1p8>; > > > + vdd3-supply = <&vreg_l2b_3p0>; > > > +}; > > > + > > > +&smb2360_1_eusb2_repeater { > > > + vdd18-supply = <&vreg_l3d_1p8>; > > > + vdd3-supply = <&vreg_l14b_3p0>; > > > +}; > > > + > > > +&tlmm { > > > + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ > > > + <76 4>, /* SPI19 (TZ Protected) */ > > > + <238 1>; /* UFS Reset */ > > > + > > > + edp_reg_en: edp-reg-en-state { > > > + pins = "gpio70"; > > > + function = "gpio"; > > > + drive-strength = <16>; > > > + bias-disable; > > > + }; > > > + > > > + kybd_default: kybd-default-state { > > > + pins = "gpio67"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + nvme_reg_en: nvme-reg-en-state { > > > + pins = "gpio18"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + tpad_default: tpad-default-state { > > > + disable-pins { > > > + pins = "gpio38"; > > > + function = "gpio"; > > > + output-high; > > > + }; > > > + > > > + int-n-pins { > > > + pins = "gpio3"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + reset-n-pins { > > > + pins = "gpio52"; > > > + function = "gpio"; > > > + bias-disable; > > > + }; > > > + }; > > > + > > > + ts0_default: ts0-default-state { > > > + disable-pins { > > > + pins = "gpio75"; > > > + function = "gpio"; > > > + output-high; > > > + }; > > > + > > > + int-n-pins { > > > + pins = "gpio51"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + reset-n-pins { > > > + /* Technically should be High-Z input */ > > > + pins = "gpio48"; > > > + function = "gpio"; > > > + output-low; > > > + drive-strength = <2>; > > > + }; > > > + }; > > > + > > > + hall_int_n_default: hall-int-n-state { > > > + pins = "gpio92"; > > > + function = "gpio"; > > > + > > > + bias-disable; > > > + }; > > > + > > > + pcie4_default: pcie4-default-state { > > > + clkreq-n-pins { > > > + pins = "gpio147"; > > > + function = "pcie4_clk"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + > > > + perst-n-pins { > > > + pins = "gpio146"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + wake-n-pins { > > > + pins = "gpio148"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + }; > > > + > > > + pcie6a_default: pcie6a-default-state { > > > + clkreq-n-pins { > > > + pins = "gpio153"; > > > + function = "pcie6a_clk"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + > > > + perst-n-pins { > > > + pins = "gpio152"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + wake-n-pins { > > > + pins = "gpio154"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + }; > > > + > > > + cam_indicator_en: cam-indicator-en-state { > > > + pins = "gpio110"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > +}; > > > + > > > +&uart21 { > > > + compatible = "qcom,geni-debug-uart"; > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_hsphy { > > > + vdd-supply = <&vreg_l3j_0p8>; > > > + vdda12-supply = <&vreg_l2j_1p2>; > > > + > > > + phys = <&smb2360_0_eusb2_repeater>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_qmpphy { > > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > > + vdda-pll-supply = <&vreg_l1j_0p9>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0 { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_dwc3 { > > > + dr_mode = "host"; > > > +}; > > > + > > > +&usb_1_ss0_dwc3_hs { > > > + remote-endpoint = <&pmic_glink_ss0_hs_in>; > > > +}; > > > + > > > +&usb_1_ss0_qmpphy_out { > > > + remote-endpoint = <&pmic_glink_ss0_ss_in>; > > > +}; > > > + > > > +&usb_1_ss1_hsphy { > > > + vdd-supply = <&vreg_l3j_0p8>; > > > + vdda12-supply = <&vreg_l2j_1p2>; > > > + > > > + phys = <&smb2360_1_eusb2_repeater>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1_qmpphy { > > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > > + vdda-pll-supply = <&vreg_l2d_0p9>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1 { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1_dwc3 { > > > + dr_mode = "host"; > > > +}; > > > + > > > +&usb_1_ss1_dwc3_hs { > > > + remote-endpoint = <&pmic_glink_ss1_hs_in>; > > > +}; > > > + > > > +&usb_1_ss1_qmpphy_out { > > > + remote-endpoint = <&pmic_glink_ss1_ss_in>; > > > +}; > > > -- > > > 2.43.0 > > > > > >
