Introduce support for the mentioned laptop. Very similar to other X1E laptops, device tree was derived by analyzing dtsi of existing models and ACPI tables of this laptop [1]. Most notable difference were * TZ protected SPI19. * Keyboard only working after suspend/resume sequence, will do a follow up patch to i2c-hid. * Lots of small deviations in LDOs voltages. Successfully tested with Debian 12 and Gnome, although this required additional patches, namely harcode GPU chipid, apply [2] and _revert_ [3] - same as in Abel Vesa's branches. Without last two the boot process is terminated by TZ. Firmware for GPU/aDSP/cDSP was extracted from Windows, WiFi firmware from upstream linux-firmware. Quite a few things alraedy work, details in patches, quite a few still in WIP or TODOs. Since fixing these may take me a while due to lack of documentation, sending current progress as its very much usable. [1] https://github.com/aarch64-laptops/build/blob/master/misc/dell-xps-9345/acpi/DSDT.dsl [2] https://lore.kernel.org/all/20240830-x1e80100-bypass-pdc-v1-1-d4c00be0c3e3@xxxxxxxxxx/ [3] https://lore.kernel.org/all/20240708-x1e80100-pd-mapper-v1-1-854386af4cf5@xxxxxxxxxx/ Aleksandrs Vinarskis (3): dt-bindings: arm: qcom: Add Dell XPS 13 9345 firmware: qcom: scm: Allow QSEECOM on Dell XPS 13 9345 arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345 .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 4 files changed, 863 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts -- 2.43.0
