Re: [PATCH v1 3/3] arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 19, 2024 at 10:01 AM Aleksandrs Vinarskis
<alex.vinarskis@xxxxxxxxx> wrote:
>
> Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100.
>
> Working:
> * Touchpad
> * Keyboard (only post suspend&resume, i2c-hid patch WIP)
> * eDP, with brightness control
> * NVME
> * USB Type-C ports in USB2/USB3 (one orientation)
> * WiFi
> * GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
> * Lid switch
> * Sleep/suspend, nothing visibly broken on resume
>
> Not working:
> * Speakers (WIP, pin guessing, x4 WSA8845)
> * Microphones (WIP, pin guessing)
> * Fingerprint Reader (WIP, USB MP with ptn3222)
> * USB as DP/USB3 (WIP, PS8830 based)
> * Camera
> * Battery Info
>
> Should be working, but cannot be tested due to lack of hw:
> * Higher res OLED, higher res IPS panels

My suspicion is that OLED vs IPS will require different dtb.  I'm
expecting the OLED to use samsung,atna33xc20 panel driver (see "arm64:
dts: qcom: x1e80100-yoga: Update panel bindings"), but IPS can
probably use edp-panel.  I'm not sure if anyone has gotten both panels
working on any other device that has both IPS and OLED variants, so
this remains a theory.  The t14s, which also has both IPS and OLED,
has different DMI/CHID values for the different SKUs, so DtbLoader
should be able to pick the correct dtb, once it exists.

BR,
-R

> * Touchscreen
>
> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../dts/qcom/x1e80100-dell-tributo-13.dts     | 860 ++++++++++++++++++
>  2 files changed, 861 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index ae002c7cf126..111c589d6bae 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM)     += sm8650-qrd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e78100-lenovo-thinkpad-t14s.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-asus-vivobook-s15.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-crd.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-dell-tributo-13.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-lenovo-yoga-slim7x.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-microsoft-romulus13.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += x1e80100-microsoft-romulus15.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts
> new file mode 100644
> index 000000000000..d387f133c398
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts
> @@ -0,0 +1,860 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "x1e80100.dtsi"
> +#include "x1e80100-pmics.dtsi"
> +
> +/ {
> +       model = "Dell XPS 13 9345";
> +       compatible = "dell,tributo-13", "qcom,x1e80100";
> +       chassis-type = "laptop";
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +
> +               pinctrl-0 = <&hall_int_n_default>;
> +               pinctrl-names = "default";
> +
> +               switch-lid {
> +                       gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
> +                       linux,input-type = <EV_SW>;
> +                       linux,code = <SW_LID>;
> +                       wakeup-source;
> +                       wakeup-event-action = <EV_ACT_DEASSERTED>;
> +               };
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&cam_indicator_en>;
> +
> +               led-camera-indicator {
> +                       label = "white:camera-indicator";
> +                       function = LED_FUNCTION_INDICATOR;
> +                       color = <LED_COLOR_ID_WHITE>;
> +                       gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "none";
> +                       default-state = "off";
> +                       /* Reuse as a panic indicator until we get a "camera on" trigger */
> +                       panic-indicator;
> +               };
> +       };
> +
> +       pmic-glink {
> +               compatible = "qcom,x1e80100-pmic-glink",
> +                                        "qcom,sm8550-pmic-glink",
> +                                        "qcom,pmic-glink";
> +               orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> +                                                       <&tlmm 123 GPIO_ACTIVE_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               /* Right-side USB Type-C port */
> +               connector@0 {
> +                       compatible = "usb-c-connector";
> +                       reg = <0>;
> +                       power-role = "dual";
> +                       data-role = "dual";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +
> +                                       pmic_glink_ss0_hs_in: endpoint {
> +                                               remote-endpoint = <&usb_1_ss0_dwc3_hs>;
> +                                       };
> +                               };
> +
> +                               port@1 {
> +                                       reg = <1>;
> +
> +                                       pmic_glink_ss0_ss_in: endpoint {
> +                                               remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               /* Left-side USB Type-C port */
> +               connector@1 {
> +                       compatible = "usb-c-connector";
> +                       reg = <1>;
> +                       power-role = "dual";
> +                       data-role = "dual";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +
> +                                       pmic_glink_ss1_hs_in: endpoint {
> +                                               remote-endpoint = <&usb_1_ss1_dwc3_hs>;
> +                                       };
> +                               };
> +
> +                               port@1 {
> +                                       reg = <1>;
> +
> +                                       pmic_glink_ss1_ss_in: endpoint {
> +                                               remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> +                                       };
> +                               };
> +                       };
> +               };
> +       };
> +
> +       reserved-memory {
> +               linux,cma {
> +                       compatible = "shared-dma-pool";
> +                       size = <0x0 0x8000000>;
> +                       reusable;
> +                       linux,cma-default;
> +               };
> +       };
> +
> +       vph_pwr: vph-pwr-regulator {
> +               compatible = "regulator-fixed";
> +
> +               regulator-name = "vph_pwr";
> +               regulator-min-microvolt = <3700000>;
> +               regulator-max-microvolt = <3700000>;
> +
> +               regulator-always-on;
> +               regulator-boot-on;
> +       };
> +
> +       vreg_edp_3p3: regulator-edp-3p3 {
> +               compatible = "regulator-fixed";
> +
> +               regulator-name = "VREG_EDP_3P3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +
> +               pinctrl-0 = <&edp_reg_en>;
> +               pinctrl-names = "default";
> +
> +               regulator-boot-on;
> +       };
> +
> +       vreg_nvme: regulator-nvme {
> +               compatible = "regulator-fixed";
> +
> +               regulator-name = "VREG_NVME_3P3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +
> +               pinctrl-0 = <&nvme_reg_en>;
> +               pinctrl-names = "default";
> +       };
> +};
> +
> +&apps_rsc {
> +       regulators-0 {
> +               compatible = "qcom,pm8550-rpmh-regulators";
> +               qcom,pmic-id = "b";
> +               vdd-bob1-supply = <&vph_pwr>;
> +               vdd-bob2-supply = <&vph_pwr>;
> +               vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
> +               vdd-l2-l13-l14-supply = <&vreg_bob1>;
> +               vdd-l5-l16-supply = <&vreg_bob1>;
> +               vdd-l6-l7-supply = <&vreg_bob2>;
> +               vdd-l8-l9-supply = <&vreg_bob1>;
> +               vdd-l12-supply = <&vreg_s5j_1p2>;
> +               vdd-l15-supply = <&vreg_s4c_1p8>;
> +               vdd-l17-supply = <&vreg_bob2>;
> +
> +               vreg_bob1: bob1 {
> +                       regulator-name = "vreg_bob1";
> +                       regulator-min-microvolt = <3008000>;
> +                       regulator-max-microvolt = <3960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_bob2: bob2 {
> +                       regulator-name = "vreg_bob2";
> +                       regulator-min-microvolt = <2504000>;
> +                       regulator-max-microvolt = <3008000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l2b_3p0: ldo2 {
> +                       regulator-name = "vreg_l2b_3p0";
> +                       regulator-min-microvolt = <3072000>;
> +                       regulator-max-microvolt = <3072000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l4b_1p8: ldo4 {
> +                       regulator-name = "vreg_l4b_1p8";
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l6b_1p8: ldo6 {
> +                       regulator-name = "vreg_l6b_1p8";
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l8b_3p0: ldo8 {
> +                       regulator-name = "vreg_l8b_3p0";
> +                       regulator-min-microvolt = <3072000>;
> +                       regulator-max-microvolt = <3072000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l9b_2p9: ldo9 {
> +                       regulator-name = "vreg_l9b_2p9";
> +                       regulator-min-microvolt = <2960000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l12b_1p2: ldo12 {
> +                       regulator-name = "vreg_l12b_1p2";
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l13b_3p0: ldo13 {
> +                       regulator-name = "vreg_l13b_3p0";
> +                       regulator-min-microvolt = <3072000>;
> +                       regulator-max-microvolt = <3072000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l14b_3p0: ldo14 {
> +                       regulator-name = "vreg_l14b_3p0";
> +                       regulator-min-microvolt = <3072000>;
> +                       regulator-max-microvolt = <3072000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l15b_1p8: ldo15 {
> +                       regulator-name = "vreg_l15b_1p8";
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l17b_2p5: ldo17 {
> +                       regulator-name = "vreg_l17b_2p5";
> +                       regulator-min-microvolt = <2504000>;
> +                       regulator-max-microvolt = <2504000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-1 {
> +               compatible = "qcom,pm8550ve-rpmh-regulators";
> +               qcom,pmic-id = "c";
> +               vdd-l1-supply = <&vreg_s5j_1p2>;
> +               vdd-l2-supply = <&vreg_s1f_0p7>;
> +               vdd-l3-supply = <&vreg_s1f_0p7>;
> +
> +               vreg_s4c_1p8: smps4 {
> +                       regulator-name = "vreg_s4c_1p8";
> +                       regulator-min-microvolt = <1856000>;
> +                       regulator-max-microvolt = <2000000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l1c_1p2: ldo1 {
> +                       regulator-name = "vreg_l1c_1p2";
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l2c_0p8: ldo2 {
> +                       regulator-name = "vreg_l2c_0p8";
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l3c_0p9: ldo3 {
> +                       regulator-name = "vreg_l3c_0p9";
> +                       regulator-min-microvolt = <920000>;
> +                       regulator-max-microvolt = <920000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-2 {
> +               compatible = "qcom,pmc8380-rpmh-regulators";
> +               qcom,pmic-id = "d";
> +               vdd-l1-supply = <&vreg_s1f_0p7>;
> +               vdd-l2-supply = <&vreg_s1f_0p7>;
> +               vdd-l3-supply = <&vreg_s4c_1p8>;
> +               vdd-s1-supply = <&vph_pwr>;
> +
> +               vreg_l1d_0p8: ldo1 {
> +                       regulator-name = "vreg_l1d_0p8";
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l2d_0p9: ldo2 {
> +                       regulator-name = "vreg_l2d_0p9";
> +                       regulator-min-microvolt = <912000>;
> +                       regulator-max-microvolt = <912000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l3d_1p8: ldo3 {
> +                       regulator-name = "vreg_l3d_1p8";
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-3 {
> +               compatible = "qcom,pmc8380-rpmh-regulators";
> +               qcom,pmic-id = "e";
> +               vdd-l2-supply = <&vreg_s1f_0p7>;
> +               vdd-l3-supply = <&vreg_s5j_1p2>;
> +
> +               vreg_l2e_0p8: ldo2 {
> +                       regulator-name = "vreg_l2e_0p8";
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l3e_1p2: ldo3 {
> +                       regulator-name = "vreg_l3e_1p2";
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-4 {
> +               compatible = "qcom,pmc8380-rpmh-regulators";
> +               qcom,pmic-id = "f";
> +               vdd-l1-supply = <&vreg_s5j_1p2>;
> +               vdd-l2-supply = <&vreg_s5j_1p2>;
> +               vdd-l3-supply = <&vreg_s5j_1p2>;
> +               vdd-s1-supply = <&vph_pwr>;
> +
> +               vreg_s1f_0p7: smps1 {
> +                       regulator-name = "vreg_s1f_0p7";
> +                       regulator-min-microvolt = <700000>;
> +                       regulator-max-microvolt = <1100000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-6 {
> +               compatible = "qcom,pm8550ve-rpmh-regulators";
> +               qcom,pmic-id = "i";
> +               vdd-l1-supply = <&vreg_s4c_1p8>;
> +               vdd-l2-supply = <&vreg_s5j_1p2>;
> +               vdd-l3-supply = <&vreg_s1f_0p7>;
> +               vdd-s1-supply = <&vph_pwr>;
> +               vdd-s2-supply = <&vph_pwr>;
> +
> +               vreg_s1i_0p9: smps1 {
> +                       regulator-name = "vreg_s1i_0p9";
> +                       regulator-min-microvolt = <900000>;
> +                       regulator-max-microvolt = <920000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_s2i_1p0: smps2 {
> +                       regulator-name = "vreg_s2i_1p0";
> +                       regulator-min-microvolt = <1000000>;
> +                       regulator-max-microvolt = <1100000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l1i_1p8: ldo1 {
> +                       regulator-name = "vreg_l1i_1p8";
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l2i_1p2: ldo2 {
> +                       regulator-name = "vreg_l2i_1p2";
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l3i_0p8: ldo3 {
> +                       regulator-name = "vreg_l3i_0p8";
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +
> +       regulators-7 {
> +               compatible = "qcom,pm8550ve-rpmh-regulators";
> +               qcom,pmic-id = "j";
> +               vdd-l1-supply = <&vreg_s1f_0p7>;
> +               vdd-l2-supply = <&vreg_s5j_1p2>;
> +               vdd-l3-supply = <&vreg_s1f_0p7>;
> +               vdd-s5-supply = <&vph_pwr>;
> +
> +               vreg_s5j_1p2: smps5 {
> +                       regulator-name = "vreg_s5j_1p2";
> +                       regulator-min-microvolt = <1256000>;
> +                       regulator-max-microvolt = <1304000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l1j_0p9: ldo1 {
> +                       regulator-name = "vreg_l1j_0p9";
> +                       regulator-min-microvolt = <912000>;
> +                       regulator-max-microvolt = <912000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l2j_1p2: ldo2 {
> +                       regulator-name = "vreg_l2j_1p2";
> +                       regulator-min-microvolt = <1256000>;
> +                       regulator-max-microvolt = <1256000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l3j_0p8: ldo3 {
> +                       regulator-name = "vreg_l3j_0p8";
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +};
> +
> +&pcie4 {
> +       perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
> +       wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> +
> +       pinctrl-0 = <&pcie4_default>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +};
> +
> +&pcie4_phy {
> +       vdda-phy-supply = <&vreg_l3i_0p8>;
> +       vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> +       status = "okay";
> +};
> +
> +&pcie6a {
> +       perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
> +       wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
> +
> +       vddpe-3v3-supply = <&vreg_nvme>;
> +
> +       pinctrl-0 = <&pcie6a_default>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +};
> +
> +&pcie6a_phy {
> +       vdda-phy-supply = <&vreg_l1d_0p8>;
> +       vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> +       status = "okay";
> +};
> +
> +&qupv3_0 {
> +       status = "okay";
> +};
> +
> +&qupv3_1 {
> +       status = "okay";
> +};
> +
> +&qupv3_2 {
> +       status = "okay";
> +};
> +
> +&remoteproc_adsp {
> +       firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn",
> +                                       "qcom/x1e80100/dell/tributo/adsp_dtbs.elf";
> +
> +       status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +       firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn",
> +                                       "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf";
> +
> +       status = "okay";
> +};
> +
> +&gpu {
> +       status = "okay";
> +
> +       zap-shader {
> +               firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn";
> +       };
> +};
> +
> +&mdss {
> +       status = "okay";
> +};
> +
> +&mdss_dp3 {
> +       compatible = "qcom,x1e80100-dp";
> +       /delete-property/ #sound-dai-cells;
> +
> +       status = "okay";
> +
> +       aux-bus {
> +               panel {
> +                       /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */
> +                       compatible = "edp-panel";
> +                       power-supply = <&vreg_edp_3p3>;
> +
> +                       port {
> +                               edp_panel_in: endpoint {
> +                                       remote-endpoint = <&mdss_dp3_out>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       ports {
> +               port@1 {
> +                       reg = <1>;
> +
> +                       mdss_dp3_out: endpoint {
> +                               data-lanes = <0 1 2 3>;
> +                               link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> +
> +                               remote-endpoint = <&edp_panel_in>;
> +                       };
> +               };
> +       };
> +};
> +
> +&mdss_dp3_phy {
> +       vdda-phy-supply = <&vreg_l3j_0p8>;
> +       vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> +       status = "okay";
> +};
> +
> +&i2c0 {
> +       clock-frequency = <400000>;
> +       status = "okay";
> +
> +       keyboard@5 {
> +               compatible = "hid-over-i2c";
> +               reg = <0x5>;
> +
> +               hid-descr-addr = <0x20>;
> +               interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
> +
> +               pinctrl-0 = <&kybd_default>;
> +               pinctrl-names = "default";
> +
> +               wakeup-source;
> +       };
> +};
> +
> +&i2c3 {
> +       clock-frequency = <400000>;
> +       status = "disabled";
> +       /* PS8830 Retimer @0x8 */
> +       /* Unknown device @0x9 */
> +};
> +
> +&i2c5 {
> +       clock-frequency = <100000>;
> +       status = "disabled";
> +       /* Unknown device @0x3b */
> +};
> +
> +&i2c7 {
> +       clock-frequency = <400000>;
> +       status = "disabled";
> +       /* PS8830 Retimer @0x8 */
> +       /* Unknown device @0x9 */
> +};
> +
> +&i2c8 {
> +       clock-frequency = <400000>;
> +
> +       status = "okay";
> +
> +       touchscreen@0 {
> +               compatible = "hid-over-i2c";
> +               reg = <0x0>;
> +
> +               hid-descr-addr = <0x1>;
> +               interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
> +
> +               pinctrl-0 = <&ts0_default>;
> +               pinctrl-names = "default";
> +       };
> +};
> +
> +&i2c9 {
> +       clock-frequency = <400000>;
> +       status = "disabled";
> +       /* USB3 retimer device @0x4f */
> +};
> +
> +&i2c17 {
> +       clock-frequency = <400000>;
> +       status = "okay";
> +
> +       touchpad@2c {
> +               compatible = "hid-over-i2c";
> +               reg = <0x2c>;
> +
> +               hid-descr-addr = <0x20>;
> +               interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> +
> +               pinctrl-0 = <&tpad_default>;
> +               pinctrl-names = "default";
> +
> +               wakeup-source;
> +       };
> +};
> +
> +&smb2360_0_eusb2_repeater {
> +       vdd18-supply = <&vreg_l3d_1p8>;
> +       vdd3-supply = <&vreg_l2b_3p0>;
> +};
> +
> +&smb2360_1_eusb2_repeater {
> +       vdd18-supply = <&vreg_l3d_1p8>;
> +       vdd3-supply = <&vreg_l14b_3p0>;
> +};
> +
> +&tlmm {
> +       gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
> +                                                       <76 4>,  /* SPI19 (TZ Protected) */
> +                                                       <238 1>; /* UFS Reset */
> +
> +       edp_reg_en: edp-reg-en-state {
> +               pins = "gpio70";
> +               function = "gpio";
> +               drive-strength = <16>;
> +               bias-disable;
> +       };
> +
> +       kybd_default: kybd-default-state {
> +               pins = "gpio67";
> +               function = "gpio";
> +               bias-pull-up;
> +       };
> +
> +       nvme_reg_en: nvme-reg-en-state {
> +               pins = "gpio18";
> +               function = "gpio";
> +               drive-strength = <2>;
> +               bias-disable;
> +       };
> +
> +       tpad_default: tpad-default-state {
> +               disable-pins {
> +                       pins = "gpio38";
> +                       function = "gpio";
> +                       output-high;
> +               };
> +
> +               int-n-pins {
> +                       pins = "gpio3";
> +                       function = "gpio";
> +                       bias-pull-up;
> +               };
> +
> +               reset-n-pins {
> +                       pins = "gpio52";
> +                       function = "gpio";
> +                       bias-disable;
> +               };
> +       };
> +
> +       ts0_default: ts0-default-state {
> +               disable-pins {
> +                       pins = "gpio75";
> +                       function = "gpio";
> +                       output-high;
> +               };
> +
> +               int-n-pins {
> +                       pins = "gpio51";
> +                       function = "gpio";
> +                       bias-pull-up;
> +               };
> +
> +               reset-n-pins {
> +                       /* Technically should be High-Z input */
> +                       pins = "gpio48";
> +                       function = "gpio";
> +                       output-low;
> +                       drive-strength = <2>;
> +               };
> +       };
> +
> +       hall_int_n_default: hall-int-n-state {
> +               pins = "gpio92";
> +               function = "gpio";
> +
> +               bias-disable;
> +       };
> +
> +       pcie4_default: pcie4-default-state {
> +               clkreq-n-pins {
> +                       pins = "gpio147";
> +                       function = "pcie4_clk";
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +
> +               perst-n-pins {
> +                       pins = "gpio146";
> +                       function = "gpio";
> +                       drive-strength = <2>;
> +                       bias-disable;
> +               };
> +
> +               wake-n-pins {
> +                       pins = "gpio148";
> +                       function = "gpio";
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +       };
> +
> +       pcie6a_default: pcie6a-default-state {
> +               clkreq-n-pins {
> +                       pins = "gpio153";
> +                       function = "pcie6a_clk";
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +
> +               perst-n-pins {
> +                       pins = "gpio152";
> +                       function = "gpio";
> +                       drive-strength = <2>;
> +                       bias-disable;
> +               };
> +
> +               wake-n-pins {
> +                       pins = "gpio154";
> +                       function = "gpio";
> +                       drive-strength = <2>;
> +                       bias-pull-up;
> +               };
> +       };
> +
> +       cam_indicator_en: cam-indicator-en-state {
> +               pins = "gpio110";
> +               function = "gpio";
> +               drive-strength = <2>;
> +               bias-disable;
> +       };
> +};
> +
> +&uart21 {
> +       compatible = "qcom,geni-debug-uart";
> +       status = "okay";
> +};
> +
> +&usb_1_ss0_hsphy {
> +       vdd-supply = <&vreg_l3j_0p8>;
> +       vdda12-supply = <&vreg_l2j_1p2>;
> +
> +       phys = <&smb2360_0_eusb2_repeater>;
> +
> +       status = "okay";
> +};
> +
> +&usb_1_ss0_qmpphy {
> +       vdda-phy-supply = <&vreg_l3e_1p2>;
> +       vdda-pll-supply = <&vreg_l1j_0p9>;
> +
> +       status = "okay";
> +};
> +
> +&usb_1_ss0 {
> +       status = "okay";
> +};
> +
> +&usb_1_ss0_dwc3 {
> +       dr_mode = "host";
> +};
> +
> +&usb_1_ss0_dwc3_hs {
> +       remote-endpoint = <&pmic_glink_ss0_hs_in>;
> +};
> +
> +&usb_1_ss0_qmpphy_out {
> +       remote-endpoint = <&pmic_glink_ss0_ss_in>;
> +};
> +
> +&usb_1_ss1_hsphy {
> +       vdd-supply = <&vreg_l3j_0p8>;
> +       vdda12-supply = <&vreg_l2j_1p2>;
> +
> +       phys = <&smb2360_1_eusb2_repeater>;
> +
> +       status = "okay";
> +};
> +
> +&usb_1_ss1_qmpphy {
> +       vdda-phy-supply = <&vreg_l3e_1p2>;
> +       vdda-pll-supply = <&vreg_l2d_0p9>;
> +
> +       status = "okay";
> +};
> +
> +&usb_1_ss1 {
> +       status = "okay";
> +};
> +
> +&usb_1_ss1_dwc3 {
> +       dr_mode = "host";
> +};
> +
> +&usb_1_ss1_dwc3_hs {
> +       remote-endpoint = <&pmic_glink_ss1_hs_in>;
> +};
> +
> +&usb_1_ss1_qmpphy_out {
> +       remote-endpoint = <&pmic_glink_ss1_ss_in>;
> +};
> --
> 2.43.0
>
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux