On 19/09/2024 18:59, Aleksandrs Vinarskis wrote:
> + panic-indicator;
> + };
> + };
> +
> + pmic-glink {
> + compatible = "qcom,x1e80100-pmic-glink",
> + "qcom,sm8550-pmic-glink",
> + "qcom,pmic-glink";
Misaligned. These start with previous ".
> + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> + <&tlmm 123 GPIO_ACTIVE_HIGH>;
Even more misaligned. I guess this comment applies to multiple places.
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Right-side USB Type-C port */
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_ss0_hs_in: endpoint {
> + remote-endpoint = <&usb_1_ss0_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss0_ss_in: endpoint {
> + remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> + };
> + };
> + };
> + };
> +
> + /* Left-side USB Type-C port */
> + connector@1 {
> + compatible = "usb-c-connector";
> + reg = <1>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_ss1_hs_in: endpoint {
> + remote-endpoint = <&usb_1_ss1_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss1_ss_in: endpoint {
> + remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + reserved-memory {
> + linux,cma {
> + compatible = "shared-dma-pool";
> + size = <0x0 0x8000000>;
> + reusable;
> + linux,cma-default;
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
regulator-foo-bar (so regulator-vph-pwr), which will also point to the
need of reordering the nods. They are sorted alphabetically.
Best regards,
Krzysztof
