From: Peng Fan <peng.fan@xxxxxxx> V2: Add blank line between property and child node in patch 3 Move compatible in the beginning in patch 8 For patch 9, the pinctrl settings are same, because drive strengh only has a enable/disable bit. Add flexspi, cm33, thermal, cpuidle, reserved memory nodes Enable flexspi, lpi2c7, spi-nor, cm33 for i.MX8ULP-EVK Set default clock for SDHC Haibo Chen (3): arm64: dts: imx8ulp: add flexspi node arm64: dts: imx8ulp-evk: add 100MHz/200MHz pinctrl setting for eMMC arm64: dts: imx8ulp-evk: enable lpi2c7 bus Han Xu (1): arm64: dts: imx8ulp-evk: add spi-nor device support Peng Fan (6): arm64: dts: imx8ulp: add cm33 node arm64: dts: imx8ulp: set default clock for SDHC arm64: dts: imx8ulp: add thermal node arm64: dts: imx8ulp: add cpuidle node arm64: dts: imx8ulp-evk: add reserved memory for cma arm64: dts: imx8ulp-evk: enable CM33 node arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 145 ++++++++++++++++-- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 73 ++++++++- 2 files changed, 205 insertions(+), 13 deletions(-) -- 2.37.1
