[PATCH V2 10/10] arm64: dts: imx8ulp-evk: enable lpi2c7 bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Haibo Chen <haibo.chen@xxxxxxx>

Enable lpi2c7 bus, and enable i2c IO expander.

Reviewed-by: Clark Wang <xiaoning.wang@xxxxxxx>
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 1314383caf76..69dd8e31027c 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -118,6 +118,23 @@ &lpuart5 {
 	status = "okay";
 };
 
+&lpi2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	pinctrl-1 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal9554b";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &usdhc0 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -200,6 +217,13 @@ MX8ULP_PAD_PTF15__LPUART5_RX	0x3
 		>;
 	};
 
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE12__LPI2C7_SCL	0x20
+			MX8ULP_PAD_PTE13__LPI2C7_SDA	0x20
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3
-- 
2.37.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux