On Mon, Jul 24, 2023 at 03:58:23PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@xxxxxxx> > > V2: > Add blank line between property and child node in patch 3 > Move compatible in the beginning in patch 8 > For patch 9, the pinctrl settings are same, because drive strengh only > has a enable/disable bit. > > Add flexspi, cm33, thermal, cpuidle, reserved memory nodes > Enable flexspi, lpi2c7, spi-nor, cm33 for i.MX8ULP-EVK > Set default clock for SDHC > > Haibo Chen (3): > arm64: dts: imx8ulp: add flexspi node > arm64: dts: imx8ulp-evk: add 100MHz/200MHz pinctrl setting for eMMC > arm64: dts: imx8ulp-evk: enable lpi2c7 bus > > Han Xu (1): > arm64: dts: imx8ulp-evk: add spi-nor device support > > Peng Fan (6): > arm64: dts: imx8ulp: add cm33 node > arm64: dts: imx8ulp: set default clock for SDHC > arm64: dts: imx8ulp: add thermal node > arm64: dts: imx8ulp: add cpuidle node > arm64: dts: imx8ulp-evk: add reserved memory for cma > arm64: dts: imx8ulp-evk: enable CM33 node Applied all, thanks!
