From: Haibo Chen <haibo.chen@xxxxxxx>
Add flexspi node, flexspi has a special memory region mapped to
0x60000000~0x6fffffff. This region is for AHB usage. So add this region
to SoC ranges.
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 17cbe526a5b0..8a6596d5a581 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -195,7 +195,8 @@ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x40000000>;
+ ranges = <0x0 0x0 0x0 0x40000000>,
+ <0x60000000 0x0 0x60000000 0x1000000>;
s4muap: mailbox@27020000 {
compatible = "fsl,imx8ulp-mu-s4";
@@ -350,6 +351,21 @@ pcc4: clock-controller@29800000 {
#reset-cells = <1>;
};
+ flexspi2: spi@29810000 {
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
+ <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+ clock-names = "fspi", "fspi_en";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+ status = "disabled";
+ };
+
lpi2c6: i2c@29840000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29840000 0x10000>;
--
2.37.1
