Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 09, 2019 at 04:01:47PM +0200, Alexandre Belloni wrote:
> 
> On 09/10/2019 15:55:00+0200, Ludovic Desroches wrote:
> > On Wed, Oct 02, 2019 at 04:46:56PM +0200, Kamel Bouhara wrote:
> > > External E-Mail
> > > 
> > > 
> > > Implement i2c bus recovery when slaves devices might hold SDA low.
> > > In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
> > > until the slave release SDA.
> > > 
> > 
> > Hi Kamel,
> > 
> > Thanks for adding this new feature. As I see patches only for sama5d3 and
> > sama5d4, I assume it has not been tested with a sama5d2, isn't it?
> > 
> 
> I there a point having it on sama5d2 as the controller already supports
> this feature?
> 

Right, I was focused on pinctrl and forget we have this feature
supported by the IP.

> > I doubt it works with a sama5d2 because of the pinctrl. I also wonder if it can
> > work if we add .strict = true to pinmux_ops which is something plan for the
> > future...
> > 
> 
> I don't see why it wouldn't work with strict as this is switching muxing
> properly instead of using the pins for two functions at the same time.
> 

Not sure devm_gpiod_get won't fail with strict.

Ludovic



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux