Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 02, 2019 at 04:46:56PM +0200, Kamel Bouhara wrote:
> External E-Mail
> 
> 
> Implement i2c bus recovery when slaves devices might hold SDA low.
> In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
> until the slave release SDA.
> 

Hi Kamel,

Thanks for adding this new feature. As I see patches only for sama5d3 and
sama5d4, I assume it has not been tested with a sama5d2, isn't it?

I doubt it works with a sama5d2 because of the pinctrl. I also wonder if it can
work if we add .strict = true to pinmux_ops which is something plan for the
future...

Are you able to test these points? It would be nice to be aware of
possible side effects.

Regards

Ludovic

> Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-at91-master.c | 63 ++++++++++++++++++++++++++++
>  drivers/i2c/busses/i2c-at91.h        |  8 ++++
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> index a3fcc35ffd3b..df5bb93f952d 100644
> --- a/drivers/i2c/busses/i2c-at91-master.c
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -18,11 +18,13 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/dmaengine.h>
>  #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/platform_data/dma-atmel.h>
>  #include <linux/pm_runtime.h>
> @@ -768,6 +770,63 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
>  	return ret;
>  }
>  
> +static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
> +{
> +	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> +	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
> +}
> +
> +static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
> +{
> +	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> +	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
> +}
> +
> +static int at91_init_twi_recovery_info(struct platform_device *pdev,
> +				       struct at91_twi_dev *dev)
> +{
> +	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +
> +	dev->pinctrl = devm_pinctrl_get(&pdev->dev);
> +	if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
> +		dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
> +		return PTR_ERR(dev->pinctrl);
> +	}
> +
> +	dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
> +							 PINCTRL_STATE_DEFAULT);
> +	dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
> +						      "gpio");
> +	rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
> +	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +
> +	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
> +					  GPIOD_OUT_HIGH_OPEN_DRAIN);
> +	if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +
> +	if (IS_ERR(rinfo->sda_gpiod) ||
> +		   IS_ERR(rinfo->scl_gpiod) ||
> +		   IS_ERR(dev->pinctrl_pins_default) ||
> +		   IS_ERR(dev->pinctrl_pins_gpio)) {
> +		dev_info(&pdev->dev, "recovery information incomplete\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_info(&pdev->dev, "using scl%s for recovery\n",
> +		 rinfo->sda_gpiod ? ",sda" : "");
> +
> +	rinfo->prepare_recovery = at91_prepare_twi_recovery;
> +	rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
> +	rinfo->recover_bus = i2c_generic_scl_recovery;
> +	dev->adapter.bus_recovery_info = rinfo;
> +
> +	return 0;
> +}
> +
>  int at91_twi_probe_master(struct platform_device *pdev,
>  			  u32 phy_addr, struct at91_twi_dev *dev)
>  {
> @@ -795,6 +854,10 @@ int at91_twi_probe_master(struct platform_device *pdev,
>  
>  	at91_calc_twi_clock(dev);
>  
> +	rc = at91_init_twi_recovery_info(pdev, dev);
> +	if (rc == -EPROBE_DEFER)
> +		return rc;
> +
>  	dev->adapter.algo = &at91_twi_algorithm;
>  	dev->adapter.quirks = &at91_twi_quirks;
>  
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> index 499b506f6128..b89dab55e776 100644
> --- a/drivers/i2c/busses/i2c-at91.h
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -141,6 +141,10 @@ struct at91_twi_dev {
>  	u32 fifo_size;
>  	struct at91_twi_dma dma;
>  	bool slave_detected;
> +	struct i2c_bus_recovery_info rinfo;
> +	struct pinctrl *pinctrl;
> +	struct pinctrl_state *pinctrl_pins_default;
> +	struct pinctrl_state *pinctrl_pins_gpio;
>  #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
>  	unsigned smr;
>  	struct i2c_client *slave;
> @@ -158,6 +162,10 @@ void at91_init_twi_bus_master(struct at91_twi_dev *dev);
>  int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr,
>  			  struct at91_twi_dev *dev);
>  
> +void at91_twi_prepare_recovery(struct i2c_adapter *adap);
> +void at91_twi_unprepare_recovery(struct i2c_adapter *adap);
> +void at91_twi_init_recovery_info(struct at91_twi_dev *dev);
> +
>  #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
>  void at91_init_twi_bus_slave(struct at91_twi_dev *dev);
>  int at91_twi_probe_slave(struct platform_device *pdev, u32 phy_addr,
> -- 
> 2.23.0
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux