Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 02, 2019 at 04:46:56PM +0200, Kamel Bouhara wrote:
> Implement i2c bus recovery when slaves devices might hold SDA low.
> In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
> until the slave release SDA.
> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>

Setting up the bus_recovery looks OK. However, I don't see any call to
i2c_recover_bus(), so the bus_recovery is never used. Did you test this
and see an effect?

Also, I think we should merge this patch "[PATCH v3] i2c: at91: Send bus
clear command if SCL or SDA is down" into this series. The crucial thing
for both is when to apply the recovery (at the beginning of a
transfer!). The rest is "just" that some HW needs a bus_recovery_info
for pinctrl/GPIO handling (from this patch), while other HW needs a
bus_recovery_info with a custom recover_bus callback.

Opinions?

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux